Yarisworld Archive

Limits of stock 1nzfe found once and for all.

167 posts · 63,684 views · page 4 of 4

Replies continued

TURBO YARISUSA · Jun 8, 2012#151
At no time did I claim you said " don't do it, or that's it's a bad idea, or that it won't make power" so I dont understand why you would need to defend a statement you never said.

Weather or not it was done to your motor or Blowns motor is not the issue here. The issue is how can anyone say this:

"balancing a four cylinder engine is just a waste"

or

"but Inline engines dont inflict the type of counteracting forces on the crank that the V styles engines do."
cali yarisCanoga Park, CA · Jun 8, 2012#152
^ ok.
pimp my yarisThread starterchicago · Jun 9, 2012#153
Yes, Im sure if your building V8 funny cars balancing the rotating assem. is far more critical.
fnkngrvIn The Hotbox · Jun 10, 2012#154
I wantesdto really say something here, but since the owner of YW is too effin cheap to provide a solid mobile solution I have put in too much effort here just to type this!
cali yarisCanoga Park, CA · Jun 10, 2012#155
Is it time for a Thread Summary? 🙂

Reading again, I don't see that there's much of an argument in here.
thefallsSunny place · Jun 10, 2012#156
Just to chime in,i know many people with 4efte forged engines that have not been balanced and doing fine. This doesnt mean that you shouldnt do it but just to show that it may not be necessary.

I have been told that if you dont go above stock redline then you can get away with it.
TURBO YARISUSA · Jun 10, 2012#157
Originally Posted by pimp my yaris ↑
Yes, Im sure if your building V8 funny cars balancing the rotating assem. is far more critical.
I could only wish I was building NHRA funny cars, but actually the red and green cars are Pro Mods & the blue is a Top Sportsman.
GolddeenohColumbia, SC · Jun 11, 2012#158
Originally Posted by pimp my yaris ↑
Yes, ...if your building V8 funny cars...
V8 funny cars!!, there is nothing funny about a blown V8, unless you have an xA that beats them. 😁
TURBO YARISUSA · Jun 12, 2012#159
Originally Posted by Golddeenoh ↑
V8 funny cars!!, there is nothing funny about a blown V8, unless you have an Xa that beats them. 😁
That will be the day! 😉
why?harnett county NC · Jun 13, 2012#160
Originally Posted by TURBO YARIS ↑
I wonder what Colin Chapman would respond to you if he read the above statement.......
Colin Chapman also never drove a car he built. I wonder why, Nor did he ever build street legal vehicles.

There is a gigantic difference between a leave no stones unturned spend every penny possible race car and a street car.

If I was going to put $40k into an engine of course I'd balance it. It would be dumb not to.

But if you are trying to get people who spend a few grand on a turbo kit, tune it themselves, and maybe spend a few hours with a professional tuner to make a $13k car hit 130-150hp, I just don't see the point. Unless you are going to tell me you'd charge someone a flat rate of two or three hundred dollars to do it, I don't see the need for it on a street car or even a car that is auto crossed on a local level.

And yes, on a big block from the 60's it would be worth it, as it would probably make more power. As Dent guy mentioned, if it isn't necessary on a high powered Supra, I doubt it would be necessary on a street driven Yaris.
fnkngrvIn The Hotbox · Jun 13, 2012#161
Brian...hit me up on the phone if you wanna discuss anything further on your build bud. You know I am interested...I am over this thread. No offense.
cali yarisCanoga Park, CA · Jun 13, 2012#162
Do you see the point if they intend to push it to 250-300? Because that's what's up on this build.

Let's just leave it alone, guys and enjoy the hell out of pimp's build.

spend a few grand on a turbo kit, tune it themselves, and maybe spend a few hours with a professional tuner to make a $13k car hit 130-150hp, I just don't see the point.
GolddeenohColumbia, SC · Jun 13, 2012#163
yea enough talk let see those parts; see the build; see the video; and listen to the purr, wine, and whistle of the turbo as the Yaris winds up.

This thread needs more photos to stare at :D
why?harnett county NC · Jun 15, 2012#164
Originally Posted by cali yaris ↑
Do you see the point if they intend to push it to 250-300? Because that's what's up on this build.

Let's just leave it alone, guys and enjoy the hell out of pimp's build.
Leaving it alone is boring, if I'm flat out wrong we might as well figure it out now.

1.The problem is every modern straight engine I've seen the experience ends up like Dent Guys:
Originally Posted by DentGuy ↑
When you start doing things like "knife edging" the crank or offset grinding the journals then it can really mess with the balance or a rotating assembly. The machine shop all of us local guys use (including Sound Performance and AMS) has never seen a 2J crank out of balance. During my first engine build I went over kill with the machine shop and had them do a dynamic balance of the entire rotating assy. (Wiseco pistons, Carillo rods, ATI damper, RPS carbon clutch) Guess what... it need no adjustments.
Now im no Yaris expert but it seems to me that a clean and centered install of the Main caps will free up more power than having that .0001 grams balanced out of the crank. Certain motors will benifit from the additional balancing (V formats mainly) but Inline engines dont inflict the type of counteracting forces on the crank that the V styles engines do.

Now the reason for this is this is the main difference between straight engines and V engines. V engines are V because the harmonic differences offset each other with the degree of the V. Which is why the angle is different between v4, v6, v8 , etc.

Flat engines don't have any of that vibration, because they are in a row, all working the exact same way in the same directions. Which is also why the harmonic dampeners on our cars are basically nonexistent.

2. It simply isn't cheap. Anyone who says they can balance your engine for $250 has no idea what they are doing. There is a reason balancing and blueprinting go hand in hand, they are basically the same type of labor, Anyone who you would trust to do this isn't going to be cheap. It is going to be at least $1000, probably more, depending on how familiar the person is with the engine in question. Just think about it, the engine at the least has to be disassembled and reassembled.

3.
Originally Posted by cali yaris ↑
I didn't balance my lower end -- doin' just fine over here.

Unless you go the "blank check" route, you have to make choices on which motor work to do that will get you "just a little bit more".
I chose to do what would make the most power for the money I could spend on my build.

Hasn't been a reliability issue - at all.
This is the real crux of the issue.
Originally Posted by Blown_xa ↑
Yea mine is balanced. The 1nzfe shortblock we offer comes balanced... I can't compare a non balanced motor because every one we assemble is. The machine shop who handles our motors includes balancing the rotation assembly in the process. Rods come back numbered for specific assembly order. My built motor has over 40k on it now ( not easy miles , trust me).... is it because it is balanced ? I couldn't say
I am sure they are blueprinted as well, right? For a competition engine there is no reason for it not to be.

Just like I know engines in the top racing series are all balanced.blueprinted, etc. It would be dumb to not do it.

Basically V engines and straight engines are two very different beasts when it comes to vibration.

Here's the real thing though, I don't know anyone with a modern straight engine who's ever done it and the car needed it. Like Blown Xa said, it could be insurance money. so if you know a great engine builder and have the extra couple of grand on hand, you might as well go have it done.

But as Dent Guy said, if you're on a budget there are many better things to put your money toward.

Now come on, prove me wrong. Show me the results of all these straight engines and their extensive balancing reports.
chaditotxSan Antone, Tx · Sep 18, 2012#165
Originally Posted by pimp my yaris ↑
I know that warming fuel in the tank has a negative affect on fuel mileage. This is the whole reason of new cars going with the returnless system.
:
Warm fuel atomizes better in the chamber... better mpg. returnless is purely emissions based and cost cutting. Hot fuel and air charge do increase risk of "ping" tho.
jetblastNor Cal · Nov 24, 2012#166
Just a quick tip. Hoppe's gun cleaning solvent is a great tool for applying to your engine fasteners prior to trying to break them loose. Squirt some on each fastener, and it will help counter the effects of dissimilar metal corrosion (shank siezing) between the steel bolts and aluminum block, head, etc. Just make sure to allow it plenty of time to "wick" down into where it needs to go.
tooterLos Angeles · Nov 24, 2012#167
Oooh... Hoppes #9. The shooter's perfume. 🙂