Yarisworld Archive

STF posts

647 posts · 143,819 views · page 3 of 13

Replies continued

justjesusOrange County · Jul 26, 2012#101
WHAT?!?!

People are STILL talking about his Yaris? Oh WOW. He hasn't been to an event in a while!!
xnamerxxso cal · Jul 26, 2012#102
Yeah I've had at least 5 people tell me about this one crazy Yaris that showed up with a bunch of other Yaris's Yarii not sure of pluralization in tow.
cali yarisCanoga Park, CA · Jul 26, 2012#103
I think even with my R888's I have to be in SM or CSM. But I don't understand the classing at all, and I'm not really competing to win.

I'll try for Aug. 5, but we'll see what's going on at home.

I bet they talk about it... "yeah there was this really fast Yaris being driven by a total NOOB senior driver....".... .. ..................... 🙄
xnamerxxso cal · Jul 26, 2012#104
I think your car falls into SMF or a EP car or a CSM car if you don't care about which national class your car runs in.

Nah I haven't heard anything negative about your car just that it was a crazy yaris.
justjesusOrange County · Jul 26, 2012#105
Originally Posted by xnamerxx ↑
Yeah I've had at least 5 people tell me about this one crazy Yaris that showed up with a bunch of other Yaris's Yarii not sure of pluralization in tow.
must have been from this day.... dec 2009

Originally Posted by 424262
Picture not included in this copy
:
Jason@SportsCarDebary, FL · Jul 26, 2012#106
Originally Posted by cali yaris ↑
I think even with my R888's I have to be in SM or CSM. But I don't understand the classing at all, and I'm not really competing to win.

I'll try for Aug. 5, but we'll see what's going on at home.

I bet they talk about it... "yeah there was this really fast Yaris being driven by a total NOOB senior driver....".... .. ..................... 🙄
Previously you would have been in CSM (local class with DOT R tires) or XP (national class with any tire) due to the forced induction and carbon rear hatch - with a stock rear hatch you could have run SMF (national class).

With the interior out you are limited to CSM or XP. You could go to Mod, likely EM, but you are better off in CSM or XP.
xnamerxxso cal · Jul 28, 2012#107
Well I decided to test fit the rear coilover springs I got and thank god Toyota drilling holes in the spring seat so I could use something to secure the spring just in case the wheel got to full droop.

Also learned the old perch perch pads from my mustang are a perfect fit for the spring adjuster that comes with the HR coilovers.

Although these springs through a wrench in my plans now because going down the Saleen test route I didn't get one instance or corner exit wheel spin like I normally would so I don't know if removing the front bar is a good idea anymore even though they don't feel all that much stiffer than the ones I just removed.
justjesusOrange County · Jul 30, 2012#108
^ should have include a couple of pics!

hmm. you know what the rates were? maybe they are not that different
xnamerxxso cal · Jul 30, 2012#109
HR has been no help in trying to figure out what the spring rates were judging by how much the springs sag when weight is applied to them I'm going to guess they were in the 200-290 lb range. In either case they were progressive rate spings so it would be difficult to know for sure.
I didn't really expect everything to fit so well aside from tying the spring in place so it doesn't fall out of the perch at full droop it fit with almost no modification needed. The real test will be Sunday but I don't expect much to come of this aside from either being slightly slower/faster.

The car definitely developed some interesting behavior on the street almost feels like a VW awd car so the linear front springs can't come in soon enough.

But one thing I did notice is that the car isn't really all that more uncomfortable hell with decent shocks I think 400-450 might not be that bad on the street.
justjesusOrange County · Aug 1, 2012#110
Yeah, HR isn't good about giving out info. I've tried.

You ever think about going to Adams in Riverside for testing? I like it cuz it's a good place to get your kicks, and good place for testing. Just sucks that it's a bit far.

400-450 should be fine on the street. I'm using that rate on my crx with the Tokico's set on full stiff.
xnamerxxso cal · Aug 1, 2012#111
I've been to adams before in my Mustang but haven't gone with the Yaris. I normally can't make it due to my work schedule and not being able to get there until at least 8 when everythings almost over.

Yeah I actually called them up but wasn't able to get anywhere and the TUV report wasn't helpfull either. So I attempted to check the old fashioned way by applying weight to the car and measuring the droop but seeing as the springs are progressive its not really all that accurate. I'm just happy the springs fit with little to no adjustment.
I'll try to get some pictures of my kludging of the spring to make it work but almost a week of driving and lifting of the rear wheels hasn't caused anything the break yet.
I think I could handle 400 lb/in but I would need some decent adjustable shock as it sits right now I don't think I would like anything stiffer than 375".

The motion ratios on the Yaris and CRX are differant so its hard to compare spring rates. Hell I had 1200lb/in springs on my mustang and that ride wasn't all that bad but moving the spring on the strut and lowering it to 400lb/in made the car stiffer so its really an apples/oranges comparison.
xnamerxxso cal · Aug 6, 2012#112
So bumping the rear spring rate turned out to work way better than I expected at El Toro the car could take almost any line I wanted and the turn arounds where I normally have tons of issues just worked for me I could stay tight and just pedal-it a bit to get the car where I wanted it to be. If my tires didn't keep overheating and had a bit more grip I would have been on the heels of some of the faster ST Civics.
This car flat out works right now although I would like a touch more spring in the front it doesn't seem to be a big issue. Its so much fun to hang the ass out doing 40 mph in a FWD car.
justjesusOrange County · Aug 6, 2012#113
I didn't see you run, but you were right on MY heels, for sure!!!
Less than two seconds behind me.
You should pick up those wheels, man!! (from Peter Looney) And get two more, to complete the set. slap on some Toyos..... and have some fun chasing the STC guys!
xnamerxxso cal · Aug 6, 2012#114
I'm stuck in a tough spot right now, I'm trying to figure out a way to get the car to nationals while not killing my entire budget, so I haven't quite figured out how I was going to do that.

Pete's wheels are on the top of my list but I might end up going cheap and buying some Kumho XS's or Falkens just so I have something decent on my rims. I would keep my Conti's on but the outside edge are toast from not running enough camber earlier in the year.

I paxed higher than I normally do hell I was less than 2 seconds off Jonathan Lugod on pax and I'm running worn out rain tires so something with the car is definitely working.
justjesusOrange County · Aug 6, 2012#115
NO WAY?!?!?! Props to you for even thinking of Nats!!!

In testing by Grassroots, the XS was a decent tire in autoX. I believe it was the 205/50-15 size that was tested. It's a good way to go given the price.

And Jon is a great driver! Nicely done.
Jason@SportsCarDebary, FL · Aug 6, 2012#116
Originally Posted by xnamerxx ↑
I'm stuck in a tough spot right now, I'm trying to figure out a way to get the car to nationals while not killing my entire budget, so I haven't quite figured out how I was going to do that.

Pete's wheels are on the top of my list but I might end up going cheap and buying some Kumho XS's or Falkens just so I have something decent on my rims. I would keep my Conti's on but the outside edge are toast from not running enough camber earlier in the year.
Don't do it. Compromising in the short term wont help you, neither of those tires can get it done.

You would be better off saving your money for the good stuff and flipping the tires you have - this assumes the rest of the tire is still ok, and you have only burned up the outside edge.
xnamerxxso cal · Aug 6, 2012#117
Originally Posted by justjesus ↑
NO WAY?!?!?! Props to you for even thinking of Nats!!!
Well I still have to figure out my tire problem but I've got the time off work just in case.
ilikericeThread startersavannah, ga · Aug 7, 2012#118
I agree with Jason on the tires.. dont go cheap on tires.. get the good stuff, esp if you are going for nationals.

Also, was wondering if Jason has heard/read about SCCA making the R1R's illegal next year. Someone was telling me about that over the weekend at autocross when I said I was gonna get some R1R's soon.

Now for my autocross update.
Aug 4th was my last event and it was at Roebling Road Raceway, we used 1/3 of the track, turns 1-4. It was really tight too, bounced off rev limiter in 2nd one time. Usually we can get into 3rd at the track events.

Excited, there was a mazda2 (was a novice, only had wider rims that put him in STF) and honda fit (rival) from jacksonville that came also. If you remember, i went to Jacksonville back in Feb and beat everyone in Pax there. So he came back to return the favor.. he beat me by 1 cone. I could not get a clean run to save my life. It was such a close run too. I ran a 79.9 +1cone and he ran a clean 80.2. That .3 sec in a 80+ second couse.. That is insane how close we were too.

Overall, the Fit beat everyone in Pax, S2000 CR came in second and I came in 3rd. I say not too bad with 1 cone added to my best time.

The results are in:
http://buccaneerregion.com/ce-7-12.html
xnamerxxso cal · Aug 7, 2012#119
The r1r rule was removed so its a non issue, I really don't want to go cheap on the tires but its a tempting option.

To give you some perspective on that guy here are the Dixie National Tour results from the beginning of the year. So its a good bet some of those drivers are faster now. Todd Freeman will place 2nd at nationals and Andy Hollis will take it down.

T 1 91 Todd Freeman 2006 Mini Cooper White/ Hankook 59.372(2) 55.051 55.206 Total 107.574
Plymouth,MN Land O Lak 54.489 52.523 54.619(1)


T 2 77 Andres Rodriguez 2012 Mazda 2 Silver Toyo 55.930 55.225 55.301 Total 108.057
Plantation,FL Mike Car Shop and Costin Florida/ 52.832 53.398 54.735(1) (0.483)


3 32 Ervin Carder 2012 Mazda 2 Green Toyo 64.035(4) 56.358 56.012 Total 109.709
Alabaster,AL Alabama/ 58.183(2) 53.697 57.844(3) (1.652)


4 23 Chris Hill 2006 Mazda 3 Titanium Hankook 62.767(4) 58.107(2) 56.148 Total 109.815
Anderson,SC Mazdaspeed Motorsports Central Ca DNF 55.660 53.667 (0.106)


5 15 Adam Neylans 2010 Honda Fit White Hankook 58.810 56.869 56.210 Total 111.472
Keystone Heights,FL Buccaneer/ 56.365(1) 61.073 55.262 (1.657)


Doing a bunch of armchair quarterbacking and wishful thinking I think I could place top 4 but realistically I'm likely a bottom 3 contender.
ilikericeThread startersavannah, ga · Aug 8, 2012#120
Ok. Adam nylans is the guy i race against here in my region and i know i am faster than he is and i still have a few mods left open for me. But finding 3 seconds in 3 runs would be hard
xnamerxxso cal · Aug 8, 2012#121
That was also from March so he may have gotten faster since then but its a way to armchair benchmark yourself.

I'll repeat something wise that was told to me, you won't really know how fast you are until you go to some of the out of town events where the fast drivers show up.
This is a big part of why I decided to go to nationals this year since I won't have the opportunity to go next year. Even though I know winning isn't an option unless something unfortunate happens to my competitors it will still be an experience to compete against people who are worlds away.

You might gain some time by switching the spring balance to the rear of the a car like 6k springs on the front and 6.5 or 7k springs on the rear depending on swaybar something like that can't say it will help you but it helped me.
I know my spring balance is rearward biased so the car has some funny behavior like any form of lift-off at high loads at speeds greater than 30 mph results in a oversteer condition so what ends up happening is that I'll be taking fast bends really tight using the gas pedal to point the car through the turn but it also gets the car unsettled on shallow corner exit its weird to experience the first time but once you get the hang of it, it almost feels natural.
YMMV but I picked up something like 3.5 seconds from just my rear springs alone but the car suits my driving style a bit better now so that's likely where all the time came from.
Coming from a Mustang where you can't really be precise and everything is throwing the car at turns just to make it get round it, the Yaris now feels familiar.
ilikericeThread startersavannah, ga · Aug 8, 2012#122
I will agree i will never know how good i am til i go against pro drivers. Also they spend their entire time making their cars autocross worthy. I havent been dedicating myself enough to autocross lately. Dragoncon coming up labor day so been working on costumes :pause for laughter to stop:.
I am very comfortable on my current setup. I almost never kick my rear out unless i really try. Understeer is nearly gone. I can usually get my yaris right where i want it. I may go with the smaller front sway bar. But i think thats all the suspension mods i will do. I need to get headers and custom midpipe w/ high flow cat
justjesusOrange County · Aug 8, 2012#123
Rice: sounds like some pretty damn racing! Long courses... FUN!!!!
what's ur current suspension set up?

Namer: sorry i didn't get a chance to see you run! I left at lunch. I was on 3 hrs of sleep and wanted to bail ASAP.
ilikericeThread startersavannah, ga · Aug 8, 2012#124
Thanks. I really wanna get a gopro and record these runs. I just cant throw that kinda money around right now.

I am running megan coilovers. I adjust the rears completely hard and the front mid soft/hard. 23mm UR rear swaybar. 15x7 rota gr3 rims wrapped in 225/50 hankook rs-3's.
xnamerxxso cal · Aug 8, 2012#125
Originally Posted by ilikerice ↑
Thanks. I really wanna get a gopro and record these runs. I just cant throw that kinda money around right now.

I am running megan coilovers. I adjust the rears completely hard and the front mid soft/hard. 23mm UR rear swaybar. 15x7 rota gr3 rims wrapped in 225/50 hankook rs-3's.
If you want to go cheap and have a smartphone you can rubberband it to rv mirror and record that way.

No worries Jesus the heat that day was a killer, I got there kind of late and got stuck hot lapping behind the proparts civic.
ilikericeThread startersavannah, ga · Aug 8, 2012#126
Oooo.. thats a really good idea. Thanks namer
justjesusOrange County · Aug 9, 2012#127
Thanks for sharing the info, guys :)
ilikericeThread startersavannah, ga · Aug 9, 2012#128
no problem. anything for a little competition. no fun driving alone
xnamerxxso cal · Aug 10, 2012#129
Fyi to anyone who owns the hr coilover kit the ksport top hats fit perfectly but you'll needto swap the bearings. A good spring size is 6-7 inches 8 will fit but youll have no adjustment for lowering.
cali yarisCanoga Park, CA · Aug 11, 2012#130
when's the next SoCal autocross?
xnamerxxso cal · Aug 11, 2012#131
Sdr is running one this weekend at Qualcomm in san diegodiego , im pretty sure ill be there sunday to do some last minute testing with the new springs. Otherwise its sept 24th at fontana.
justjesusOrange County · Aug 11, 2012#132
isnt there another one in San Diego on the 26th?

Garm wants to play, now that he's lost some weight? eh, garm? hehe

FYI, Adams has summer hours. 6, 7:40, and 8:50. Although, I haven't been there when they start on time for the 8:50 one. Last time, was waiting til almost 10 to run!


namer: thanks for that tidbit on the top hats :)
xnamerxxso cal · Aug 11, 2012#133
Jesus you are correct. I don't keep up to date tabs on SD unless I'm Jonesing for another hit of the ax crack pipe.

Here is the SD schedule for the rest of the year.

http://www.sdr-scca.com/solo2/schedule/
cali yarisCanoga Park, CA · Aug 11, 2012#134
yep. I want to play.

hmm, Aug 25-26. Might be fun to stay down there and do both days. Jesus?
xnamerxxso cal · Aug 11, 2012#135
Let me know if your going down on the 25th-26th I want to see how close my lowly beast can get to the monster 👍
Jason@SportsCarDebary, FL · Aug 11, 2012#136
Just an fyi if you have not run in SD before, 93db @ 50' is the sound limit, if your car is loud your event will be short lived. Make any necessary adjustments beforehand.
xnamerxxso cal · Aug 12, 2012#137
Garm its a good thing you didn't go today the course was AWFUL no fun at all and it ate the hell out of my tires such a waste.
justjesusOrange County · Aug 13, 2012#138
Garm: hmmmm. Let me check the schedule !

Jason: Thanks for that heads up 👍


Namer: So you went to SD? Is registration similar to our Region's?

WOW. I'm glad I stood in Montebello, housesitting. With the AC on ;)
xnamerxxso cal · Aug 13, 2012#139
Not quite, you register onsite at SD and if your not a member of sdr you have to buy a temporary membership or a perm if you choose.

Yeah I really wished I turned around and went home, that course was sooo tight at one point I dropped down into the teens just to make a corner had to shift into 1st. The ending was unsafe so right after the finish and I mean immediately there was a hard right that if you zoned out for a second like I tend to do meant hitting the cones and ruining your run so coming to almost a complete stop was a must. Mix that in with a course that was generally just very hard to read looking ahead just showed you a sea of cones rather than which direction you actually needed to go. Add in a surface that was so dirty you couldn't get traction and 100 degree weather and that was a terrible day. I spun my car for the first time and I've owned that thing for 5 years and not only did I spin it but I spun it hard and I was on the throttle when this happened but it was due to the course being so dirty.
cali yarisCanoga Park, CA · Aug 13, 2012#140
Sounds like a challenging day. The Camarillo Airport autocross is wicked tight like that also. I think I've learned the most when I lost traction/control over the car.

"If you don't go over the line, you don't know where the line is" -- just a thought and a quote from someone who is faster than me.
justjesusOrange County · Aug 13, 2012#141
Damn, sounds like a rough day.

Garm, I don't remember saying that. LOL
xnamerxxso cal · Aug 13, 2012#142
Ignore the template I forgot to change it from the last time it was used. (Not affiliated with Black Iron Racing.)

Gives you an idea of how rough this track was. I actually messed up the camber on my passenger wheel hitting a cone at some mph. I was running positive camber on that wheel and didn't even realize it till I came home.

http://www.youtube.com/watch?v=qS0B-...&feature=g-upl
justjesusOrange County · Aug 13, 2012#143
Thanks for sharing!
I like it at 1:23 or so. WHOA.
looking at your speed, yeah, i can see what you mean. pretty slow. some of those turns, were way slow.
Jason@SportsCarDebary, FL · Aug 13, 2012#144
Originally Posted by xnamerxx ↑
Ignore the template I forgot to change it from the last time it was used. (Not affiliated with Black Iron Racing.)

Gives you an idea of how rough this track was. I actually messed up the camber on my passenger wheel hitting a cone at some mph. I was running positive camber on that wheel and didn't even realize it till I came home.

http://www.youtube.com/watch?v=qS0B-...&feature=g-upl
SD has some great course designers, and some that should be beaten with a cone. You think that was a painful finish, check the last two turns on this one: http://www.youtube.com/watch?v=KYIqdMe_SOI
xnamerxxso cal · Aug 13, 2012#146
Originally Posted by Jason@SportsCar ↑
SD has some great course designers, and some that should be beaten with a cone. You think that was a painful finish, check the last two turns on this one: http://www.youtube.com/watch?v=KYIqdMe_SOI
All I can say about that was how many people spun, and how many course workers lynched the designer?
justjesusOrange County · Aug 13, 2012#147
ok, looking at the other videos, the course didn't look as bad as the first time i saw the first video.

Jason, who was that and what car? Sounds pretty good!

Namer: not only did you spin, you took those cones good! knocked those suckers down.

Man, now i'm getting the itch again.
xnamerxxso cal · Aug 13, 2012#149
As a whole the course wasn't bad, but it didn't flow very well and was very hard to read at speed and the beginning and ending were way to tight.
It didn't help that my tires were pretty cooked after 2 turns and the course wasn't cleaned very well.

Yeah I think that spin is what caused my strut to slipr, I have a pretty nasty impact mark on that tire.
CrankyOldManWest Michigan · Sep 4, 2012#150
On a related note, I ran a road course autoX yesterday as STF (Grattan Speedway in Belding, MI) and got my ass handed to me by a Mazda 3. Not by a small margin, either. I'm sure there was a large amount of skill difference, but it just seems crazy that a 2.3 liter car (despite being 2900 lbs curb) is in the same class as our little egg.

On a lighter note, the wife came along to spectate and was really excited about it. So much so that she's willing to entertain ideas like performance mods as a worthwhile expenditure on a hobby. =)