Yarisworld Archive

GROUP BUY: 1NZ to 1ZZ TB spacer/adapter

120 posts · 33,799 views · page 3 of 3

Replies continued

cruz-gsrAshland Mass · Apr 19, 2010#101
im going to dyno my car soon with the spacer and w/out as soon can in school
YarizSE Texas · Apr 19, 2010#102
Sweet let me know how it goes, I am gonna try to get one on the next order if I can.
tk-421Thread starterDagobah · Apr 19, 2010#103
Originally Posted by cruz-gsr ↑
sorry 600 rpm
600 RPM is within the normal idle (I have ~500 RPM myself with the 1ZZ TB). The CEL should go away after a few trips, but I can't say for sure.
cruz-gsrAshland Mass · Apr 19, 2010#104
ill wait a couple of days to see if it clears if not ill unplug the batt for like 6 hours
New2tuningJackson WI · Apr 19, 2010#105
Is there any way one could get the prints on this part? It doesn't look that hard to make. Even with the o-ring.
Maitre_Te_TeQuébec · Apr 20, 2010#106
do you gave aply silicone between spacer and throttel
captaincrunchVirginia Beach · Apr 20, 2010#107
Is there a spacer for the 1NZ-FE?
redglare45Pomona / Pasadena, California · Apr 20, 2010#108
Originally Posted by captaincrunch ↑
Is there a spacer for the 1NZ-FE?
Exactly what I was thinking. Will they be making a spacer for those of us that don't have the 1ZZ TB???
tk-421Thread starterDagobah · Apr 20, 2010#109
Originally Posted by captaincrunch ↑
Is there a spacer for the 1NZ-FE?
Originally Posted by redglare45 ↑
Exactly what I was thinking. Will they be making a spacer for those of us that don't have the 1ZZ TB???
I remember seeing 1NZ spacers in scionlife. I suggest you look there as well. 👍
cruz-gsrAshland Mass · Apr 20, 2010#110
.......
redglare45Pomona / Pasadena, California · Apr 20, 2010#111
Yeah I did look over at scionlife, but from what I remember the throttle body is different. I believe the shape and it only has 3 screws and ours has 4.

It would be great if you can do 1NZ TO 1NZ TB spacers on the next run. 🙂
captaincrunchVirginia Beach · Apr 20, 2010#112
I found one on advance auto parts. I don't know if its the exact put it looks that it might fit.
Bluevitz-rsOshawa, Ontario, Canada · Apr 25, 2010#113
Originally Posted by kliwonz ↑
waiting for dyno result...

And at least a picture.
captaincrunchVirginia Beach · Apr 26, 2010#114
the picture on advance auto parts doesn't seem like it would fit, but it may be just a picture display. The brand is Airraid. I'm going to find out for sure if its for real.
MGarganoNJ · Jul 27, 2010#115
I've had the 1ZZ TB and spacer setup installed for about 3 months so far. To be honest, I feel no difference in performance when using the spacer. It seems to reduce the 1ZZ down to a 1NZ, as I believe someone pointed out earlier in this thread.

When I had the 1ZZ installed previously, with no spacer, I felt a definite and measurable increase in performance. All I see now is a high cold idle and a jerky-ness when I let off the gas. I've had no CEL and no oscillation though, which is a perk I guess.

I don't know if my results are the same as everyone else who is using this spacer. I'd be interested to hear other reviews.
tk-421Thread starterDagobah · Jul 27, 2010#116
This mod isn't really meant to increase performance as much as helping in smoothing out the flow of air in order to reduce that jerkiness you felt before the spacer, as well as make the air a tiny bit colder which, among other things, should increase throttle response by a small amount.

The high cold idle can be eliminated by messing around with the idle screw, BTW. Just be careful not to use too much force or you will strip it.
VanquisherSingapore · Aug 15, 2010#117
Originally Posted by MGargano ↑
I've had the 1ZZ TB and spacer setup installed for about 3 months so far. To be honest, I feel no difference in performance when using the spacer. It seems to reduce the 1ZZ down to a 1NZ, as I believe someone pointed out earlier in this thread.

When I had the 1ZZ installed previously, with no spacer, I felt a definite and measurable increase in performance. All I see now is a high cold idle and a jerky-ness when I let off the gas. I've had no CEL and no oscillation though, which is a perk I guess.

I don't know if my results are the same as everyone else who is using this spacer. I'd be interested to hear other reviews.
Same here.

Custom my own spacer,try it and took it off.
Without the spacer will be smoother.

But now idle at 1500rpm
YodaFL · Aug 16, 2010#118
anyone tried to port match the intake manifold with the tb? You could trim it out alittle its just plastic after all
kounj · Aug 16, 2010#119
Originally Posted by Yoda ↑
anyone tried to port match the intake manifold with the tb? You could trim it out alittle its just plastic after all
Me.THROTTLE BODY SWAP NO CEL!!!!