i got mine from ebayOriginally Posted by hondakiller99 ↑im beyond tempted to order this part.... where can i get the tb though? lol
GROUP BUY: 1NZ to 1ZZ TB spacer/adapter
120 posts · 33,799 views · page 2 of 3
Replies continued
ummm, this may be a dumb question but . . .
will this work with the stock tb? I ran a tb spacer on my tC and liked the improvements. or will this only work with the larger tb?
will this work with the stock tb? I ran a tb spacer on my tC and liked the improvements. or will this only work with the larger tb?
This will likely cause a leak on a stock TB because of the smaller diameter. You should get a straight version of the spacer for stock TB's, which is what xB folks have been doing for a while with favorable results (AFAIK).
but a that point why dont you upgrade the TB, trust me it makes a world of difference.Originally Posted by MiniTRD ↑ummm, this may be a dumb question but . . .
will this work with the stock tb? I ran a tb spacer on my tC and liked the improvements. or will this only work with the larger tb?
So far, the list looks like this:
1. tk-421 [NOS]
2. Maitre_Te_Te
3. cruz-gsr [NOS]
4. H3LlIoN
5. MGargano
6. pongochants
7. 👍
Remember to specify whether you want a NOS hole or not!
1. tk-421 [NOS]
2. Maitre_Te_Te
3. cruz-gsr [NOS]
4. H3LlIoN
5. MGargano
6. pongochants
7. 👍
Remember to specify whether you want a NOS hole or not!
update
TK (friday)
Cruz-gsr (paid)
Maintre_te_te (friday)
MGargano (paid)
we just need one more
TK (friday)
Cruz-gsr (paid)
Maintre_te_te (friday)
MGargano (paid)
we just need one more
Payment sent. 👍
thanks tk
Latest list:
1. tk-421 [NOS] PAID
2. Maitre_Te_Te
3. cruz-gsr [NOS] PAID
4. H3LlIoN
5. MGargano PAID
@cruz-gsr: Have you received any other payments yet?
1. tk-421 [NOS] PAID
2. Maitre_Te_Te
3. cruz-gsr [NOS] PAID
4. H3LlIoN
5. MGargano PAID
@cruz-gsr: Have you received any other payments yet?
no, maitre pm'd me and im still waiting, the other guys never answer.
H3LlIoN is out
Maitre paid, so it looks like is just the 4 of us
I don't want nos...
Maitre_te_te (Paid) No nos
Maitre_te_te (Paid) No nos
1. tk-421 [NOS] PAID
2. Maitre_Te_Te PAID
3. cruz-gsr [NOS] PAID
4. MGargano PAID
5. 😕
2. Maitre_Te_Te PAID
3. cruz-gsr [NOS] PAID
4. MGargano PAID
5. 😕
Bump. We need at least one more!
If no add, can we buy it?
I have strat a thread for the spacer at www.clubecho-yarisquebec.com.
This is a club for quebec city.
This is a club for quebec city.
Yes, but the price would be higher.Originally Posted by Maitre_Te_Te ↑If no add, can we buy it?
Good idea! Keep us posted. 👍Originally Posted by Maitre_Te_Te ↑I have strat a thread for the spacer at www.clubecho-yarisquebec.com.
This is a club for quebec city.
i talk to the fabricator and he said he will make the 4 units for us at the same price, so we are good for now, he said to check with him on wenesday to see if he is done.
hey good news, i just pick up the parts from the shop i will start shipping tomorrow, the only issue is that it does not have the o-ring becouse i din't find one that will fit, other that that it came out like a charm.
here are some pics
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Looking real good! 👍
I wonder if not having the o-ring will create issues down the road though...
Another question I've been meaning to ask: Which NOS fogger will you be using for making the hole in the adapter? I have a NX fogger myself; not sure if it's compatible with other systems...
Ooo and last question: Do you think the fabber could anodize my piece either black or dark gray?
I wonder if not having the o-ring will create issues down the road though...
Another question I've been meaning to ask: Which NOS fogger will you be using for making the hole in the adapter? I have a NX fogger myself; not sure if it's compatible with other systems...
Ooo and last question: Do you think the fabber could anodize my piece either black or dark gray?
yours and mine i need to bring back tomorrow to make the holes but if you want ill ship yours w/o the hole, i have a nos system and i don't know if is the same, also the fab told me that if i use the silicone that is for making gaskets i will not have any problems and i can ask him about the anodize but hell probably charge more.
I'm willing to pay a little more for the anodizing. Please ask him how much it'll cost.
As far as the hole... I'm not sure. Might be tough to get it done around here.
I could post a pic of my fogger and compare it to yours?
As far as the hole... I'm not sure. Might be tough to get it done around here.
I could post a pic of my fogger and compare it to yours?
ok do that and i can compare it to mine.
Question, one side is designed for to install the 1zz throtel body and other side for intall on intake manifold but the size of the hole is biger than the yaris TB hole or the same diameter??? If this is the same, I think that the 1zz TB become like a 1nz TB!
The diameter on the 1ZZ TB is larger than the 1NZ TB. Hence the benefit of having the adapter to smooth things out.
@cruz-gsr: Here's the pic of my fogger:
Picture not included in this copy
@cruz-gsr: Here's the pic of my fogger:
Picture not included in this copy
anubody have a new about shiping?
yeah they ship yesterday, for you they said i will take about a week to 10 days.
ok, tanks!!!
Received mine today. This thing looks hot! Can't wait to do the install, though I just realized I'll need longer bolts or studs to bolt the 1ZZ TB and spacer to the manifold, since the OEM ones will be too short (and I snapped a stud the last time I tried this swap, so I've been running with 3 for a few months).
What are you guys planning to use in between the TB/spacer and spacer/manifold to ensure a good seal?
What are you guys planning to use in between the TB/spacer and spacer/manifold to ensure a good seal?
im going to use the black silicone that is desing for making gaskets its like $3 at autozone
Anybody have receive her spacer and test it???
Please post the longer bolt size if/when you can. I'm still waiting on my spacer, so I can go get these before it gets here. TIAOriginally Posted by MGargano ↑Received mine today. This thing looks hot! Can't wait to do the install, though I just realized I'll need longer bolts or studs to bolt the 1ZZ TB and spacer to the manifold, since the OEM ones will be too short.
Ditto. Actually, I have my TB and spacer, but I'd rather someone else be the guinea pig on this one. And I need the specs for the longer bolts.Originally Posted by tk-421 ↑Please post the longer bolt size if/when you can. I'm still waiting on my spacer, so I can go get these before it gets here. TIA
I receive my spacer... tanks. Anybody have try her???
the intake side of spacer (not throtel side) is smaller tan other side, Ok but this is the same diameter taht the original throtel? If this is the same diameter, the 1zz throtel body become a 1nz throtel body...??? Anybody can explain to me please? Im not good with physic! lollll 🙂
its good that someone picked this up where i failed to deliver
The spacer has two holes: One with a regular 1NZ diameter hole in it, and the other one with a larger 1ZZ diameter. You need to attach it so the small hole is facing the manifold and the large hole is facing your 1ZZ throttle body.Originally Posted by Maitre_Te_Te ↑the intake side of spacer (not throtel side) is smaller tan other side, Ok but this is the same diameter taht the original throtel? If this is the same diameter, the 1zz throtel body become a 1nz throtel body...??? Anybody can explain to me please? Im not good with physic! lollll 🙂
Yes I know but if the hole is the same that original, what for use a larger thrtoel if you reduce de diameter. The 1zz throtel is juste to litel larger than the holl of intake manifold, so the spacer can be 2.2 ich to 2 ich, not 2.2 ich to 1.8 inch? I think :POriginally Posted by tk-421 ↑The spacer has two holes: One with a regular 1NZ diameter hole in it, and the other one with a larger 1ZZ diameter. You need to attach it so the small hole is facing the manifold and the large hole is facing your 1ZZ throttle body.
The bolt is M6 X 1.00 (metric) and the Length is 75mm aprosimative (3 inch)
I search for to find a dealer
I search for to find a dealer
I have install mine today. I have use the original gasket for intake to spacer, and for spacer to TB just a silicone. Bolt is M6 X 1.00 3 inch . Result, idle fix at 600 RPM and maby a litle diffrent at mid range but at cold start, engine go at 2900rpm.
I picked up the M6 x 1.00 x 75 bolts today and will hopefully be tackling this soon
Damn. I should have been watching this forum. Is there a way I can still get one of these? Payment can be immediate.
.....
Someone post up a picture of the installed piece.
i installed my spacer and TB today, the idle settle at like 6k rpm but my check engine ligth came on and it has not come off, any ideas what did i do wrong. I did unplug the batt for like an hour before i plug it back in.
A 6K RPM idle is extremely high. Something's definitely wrong there. Not sure what the problem could be, but you may want to unplug the battery for longer to make sure the ECU completely resets itself.
sorry 600 rpm
Originally Posted by H3LlIoN ↑The adapter makes the transition smoother, would will reduce turbulence in your intake. Also, it adds an easy spot for the nos jets, if you are looking at going that way.
I too am curious about the injectors, as my TB came with 1zz coils/injectors/fuel rail too. I new to FI, but methinks you would still need to reprogram ecu to send more fuel. Not sure though, hopefully someone with more experience will pop in for the assist.
Will this give a HP gain, or any sort of response difference?😕