Yarisworld Archive

GROUP BUY: 1NZ to 1ZZ TB spacer/adapter

120 posts · 33,799 views · page 1 of 3

tk-421Original postDagobah · Feb 14, 2010#1
Looks like xen555 was able to find a fabricator for the TB spacers. These ones are specifically made for those that have a 1ZZ throttle body so as to make a smooth transition between the 1NZ intake mani and the TB. The fabricator can also add a hole for the nitrous nozzle if required.

Picture not included in this copy

The normal price is $125, which is a bit steep, but we may be able to get a discount if we buy a few as a group.

SPECIAL GROUP BUY PRICE is $105 shipped inside the US, but we need at least 5 people to lock into this price!

So who's interested?

1. tk-421 [NOS] PAID
2. Maitre_Te_Te PAID
3. cruz-gsr [NOS] PAID
4. MGargano PAID
5. 😕

Replies 119

YodaFL · Feb 15, 2010#2
what does it do?
tk-421Thread starterDagobah · Feb 15, 2010#3
It improves throttle response a bit and reduces turbulence when coupled with a 1ZZ throttle body. It will also come in handy for those of us who want a quick and painless way to install a nitrous fogger.
Maitre_Te_TeQuébec · Feb 15, 2010#4
denpending the price with reduction, i'm interesting
tk-421Thread starterDagobah · Feb 15, 2010#5
I'll add you to the list for now. 👍

1. tk-421
2. Maitre_Te_Te
3.
4.
5.
kacWest/Central Illinois · Feb 16, 2010#6
Really wouldn't mind having it. but can't justify that money right at this time, if the price goes down a lil in a month or two or three maybe i can justify it then...
cruz-gsrAshland Mass · Feb 21, 2010#7
im in if the price does down
tk-421Thread starterDagobah · Feb 21, 2010#8
1. tk-421
2. Maitre_Te_Te
3. cruz-gsr
4.
5.
Toy YarisMelbourne , Australia · Feb 23, 2010#9
Will this affect the cai mounting point being a thicker around the tb area??? not sure if the cai has much more room to move or it will hut the fender liner how thick is the spacer??
tk-421Thread starterDagobah · Feb 23, 2010#10
The spacer is 1" thick, so I don't think it would affect CAI placement too much. The hose should be flexible enough to accommodate.
xen555Puerto Rico · Mar 2, 2010#11
i finally install it yesterday... the corolla TB with the 1" spacer... runs very good, i feel the diference in the low mid and high rpms never have oscilations, uphill i have to press the gas just a little and with WOT woooww is like other car LOL thanks to everyone in the forum for the help im very happy with this mod, and almost forgot i never have a single CEL!!!
👍👍
tk-421Thread starterDagobah · Mar 3, 2010#12
@xen555: That's great news, especially about the CEL (or lack thereof).
Have you heard anything from the fabricator yet about the GB pricing?
cruz-gsrAshland Mass · Mar 9, 2010#13
any updates on the spacer
tk-421Thread starterDagobah · Mar 9, 2010#14
Nothing yet, unfortunately.
I'll try PMing xen555 and update the thread ASAP.
Maitre_Te_TeQuébec · Mar 9, 2010#15
Who do this mod!?!?

The interested list:
1. tk-421
2. Maitre_Te_Te
3. cruz-gsr
4.
5.
tk-421Thread starterDagobah · Mar 11, 2010#16
OK I just sent an e-mail to the fabricator to see if he's interested. I'll post the answer ASAP.
cruz-gsrAshland Mass · Mar 12, 2010#17
let me know, i want to install my nos kit
cali yarisCanoga Park, CA · Mar 13, 2010#18
Someone will have to dyno before and after to show any power gain (or loss).
H3LlIoNMidatlantic · Mar 18, 2010#19
You can slap my name on the "interested" list, pending a price update. Dyno would be nice too, like Garm said. I've got my 1ZZ tb chilling in a box in my living room, along with the 1zz injectors and fuel rails. Not sure if those are useful or not though.
pongochantsHarris County · Mar 20, 2010#20
absolutely no need, unless you guys are running into issues. Mine works fine w/o adapter.
tk-421Thread starterDagobah · Mar 20, 2010#21
Originally Posted by H3LlIoN ↑
You can slap my name on the "interested" list
1. tk-421
2. Maitre_Te_Te
3. cruz-gsr
4. H3LlIoN
5. 👍
cruz-gsrAshland Mass · Mar 22, 2010#22
tk i think i found a fabricator for this, unless the other person said yes
tk-421Thread starterDagobah · Mar 22, 2010#23
This other dude is MIA, so it might be the best course of action.
What are his prices like? Do you think he can do the O-ring inset like the one on this pic?
cruz-gsrAshland Mass · Mar 22, 2010#24
i get my TB tomorrow on the mail and then well start working on it
H3LlIoNMidatlantic · Mar 23, 2010#25
Glad this is back on track...curious to see where this goes.
cruz-gsrAshland Mass · Mar 24, 2010#26
Originally Posted by pongochants ↑
absolutely no need, unless you guys are running into issues. Mine works fine w/o adapter.
the main thing for me is the nos fogger that will go there for an easy install.
cruz-gsrAshland Mass · Mar 24, 2010#27
ok here is the deal, i found a fabricator to do this for us at $95 each if we order 5, the down fall is i will need to pay in advance and will take about a week for them to be ready. who is in
tk-421Thread starterDagobah · Mar 24, 2010#28
Nice price!
How close would the design be to the pic on the first post?
cruz-gsrAshland Mass · Mar 24, 2010#29
perfect, the only issue i got is the o-rings, i need to go to the parts store tomorrow to see if i can find them.
MGarganoNJ · Mar 24, 2010#30
Originally Posted by cruz-gsr ↑
ok here is the deal, i found a fabricator to do this for us at $95 each if we order 5, the down fall is i will need to pay in advance and will take about a week for them to be ready. who is in
I'm in- my second 1ZZ should be here in a couple days.

I ran into some oscillation issues with the first one and took it off to be safe during the cold weather, but summer's here and I'm ready to try again
H3LlIoNMidatlantic · Mar 24, 2010#31
I don't always remember which threads I've posted in, so PM me if you guys come looking for money and I aren't responding.

Also, I got the coils/injectors/fuel rail off the 1ZZ along with the TB...would it do me any good to slap that stuff on there too?
tk-421Thread starterDagobah · Mar 25, 2010#32
Originally Posted by MGargano ↑
I'm in
1. tk-421
2. Maitre_Te_Te
3. cruz-gsr
4. H3LlIoN
5. MGargano
6. 👍
cruz-gsrAshland Mass · Mar 26, 2010#33
im going to a second place on monday just to price shop, and then we will decide if we are moving forward and collect payments.
pongochantsHarris County · Mar 27, 2010#34
whats the purpose of this adapter? I have a larger TB and I just bolted mine on. Does this allow for a higher rate of flow or something like that? Also, if you bring up the TB to 1zz, whats to stop you from going with 1zz fuel injectors, and maybe even pump?
H3LlIoNMidatlantic · Mar 27, 2010#35
The adapter makes the transition smoother, would will reduce turbulence in your intake. Also, it adds an easy spot for the nos jets, if you are looking at going that way.

I too am curious about the injectors, as my TB came with 1zz coils/injectors/fuel rail too. I new to FI, but methinks you would still need to reprogram ecu to send more fuel. Not sure though, hopefully someone with more experience will pop in for the assist.
tk-421Thread starterDagobah · Mar 27, 2010#36
I do know 1ZZ injectors are a drop-in replacement for our cars, since the Yaris ECU compensates for the difference in flow automatically. Not sure about the other components.
pongochantsHarris County · Mar 27, 2010#37
put me down for one with a nos valve on it.
tk-421Thread starterDagobah · Mar 27, 2010#38
1. tk-421
2. Maitre_Te_Te
3. cruz-gsr
4. H3LlIoN
5. MGargano
6. pongochants
7. 👍
pongochantsHarris County · Mar 28, 2010#39
I am running without this right now, and its fine. This will help with the response time and give a quick place to install NOS correct? I just wanted to make sure that it would fit up and everything. Never installed one of these before. Think it will cause a CEL?



Also quick question for those who know, if I put in this and a 1zz TB, is it necessary to put some defoulers on? I only ask because you are adjusting the air/fuel mix and didn't wanna foul them out... I also switched to a higher octane fuel, and it runs better.
cruz-gsrAshland Mass · Mar 29, 2010#40
i need to start collecting the money by friday, the fabricator will start the pieces on saturday and will take about a week. who is in.
Spacer $95 plus $10 to cover shipping and paypal fee.

send your paypal to cruz_gsr@hotmail.com
tk-421Thread starterDagobah · Mar 29, 2010#41
I'm in. I'll try to pay you by tonight, but if I can't, I'll definitely do it by Friday.
Thanks for doing this, cruz-gsr! 👍

I can update the list for people who want a nitrous hole in the spacer to simplify things. Just let me know in this thread and I'll get it done.
hondakiller99Long Island , New York · Mar 29, 2010#42
question here.... i have a 05 scion xa wid the 1nzfe..... i think i know the anwser here, but this will work for my car , correct? i mean i m trying to grab as much power as possible before i do anything major like a motor build and drop a serious amount of cash. also , prob off topic, but , does anyone make a performance intake manifold for the 1nz? i know a few people have tried and failed miserablly lol
tk-421Thread starterDagobah · Mar 29, 2010#43
This spacer should work on the xA, but I can't be 100% sure on it.
The intake mani is actually being developed by MicroImage, and they should have a prototype ready for testing soon.
cruz-gsrAshland Mass · Mar 29, 2010#44
tk, for some reason a cant send pongochants a message about the spacer, can you foward the one i send you.
tk-421Thread starterDagobah · Mar 29, 2010#45
Looks like pongochants got banned. Again.
cruz-gsrAshland Mass · Mar 29, 2010#46
why
cruz-gsrAshland Mass · Mar 29, 2010#47
paid so far:
Cruz-gsr
Pgargano
TK (Friday)
hondakiller99Long Island , New York · Mar 29, 2010#48
im beyond tempted to order this part.... where can i get the tb though? lol
tk-421Thread starterDagobah · Mar 29, 2010#49
Check the appropriate forum (Items for Sale by Private Party). They were selling one a few days ago.
tk-421Thread starterDagobah · Mar 29, 2010#50
Originally Posted by cruz-gsr ↑
why
No idea... I'll have to ask.