Did you nee to adjust the ring gap much?
Stay tuned
1,311 posts · 595,379 views · page 24 of 27
Replies continued
I really like your trailer. Seems light but plenty strong to pull the car????Originally Posted by Jason@SportsCar ↑Forgot to post much in the way of updates lately... After the Buttonwillow warm up the car went to Portland for the Rose Cup races. Jamie Bestwick qual second, and won the Friday race after Indycar vet turned H Production racer Parker Johnstone broke.
Picture not included in this copy
In qual for the Saturday race Bestwick got caught up in some oil from a blown up American Sedan Camaro, and found the tire wall in Turn 12. Toyota lined up a loaner car from a local dealer so we could make repairs, but we elected to call it with one win in the books and headed home. Sadly this meant I also missed the July 4th Majors race a few weeks later, but since I was already qualified for the Runoffs it did not matter.
Picture not included in this copy
We had to replace the hood, drivers fender, door, lights and bumper. We were able to get most of the parts from a 2014 prototype. We actually rebuilt the car as a 2014 so we could take Bestwick out testing.
Picture not included in this copy
Picture not included in this copy
Just picked up the 2015 bodywork yesterday, and we will be putting that on for the Runoffs at Daytona. I like the 2014 nose better.
We have also been working on a new engine for Daytona, fingers crossed its ready in time.
Just had the spare trans checked out, and the OS Giken LSD adjusted with a little hotter setup. The off the shelf setup has been pretty good, but they said they can dial in a touch more lock up since we are running such a sticky tire.
Picture not included in this copy
If ever you have better pics of it and don't mind sharing, would be much appreciated.
Cheers
John
That is beyond my pay grade. I sent out a stock short block with a set of CP-Carrillo rods and pistons, and got a finished piece back, what happened in between I do not know. 😆Originally Posted by Bluevitz-rs ↑Did you nee to adjust the ring gap much?
That trailer is only used for shorter tows, for out of state I use a bigger one. Weighs 830lbs. Only downside is no brakes.Originally Posted by Rigaud ↑I really like your trailer. Seems light but plenty strong to pull the car????
If ever you have better pics of it and don't mind sharing, would be much appreciated.
Cheers
John
Yeah no brakes is a no go here. I'm gonna be making a trailer this winter in my shop, mind as well make one with some room for tools, etc...Originally Posted by Jason@SportsCar ↑That trailer is only used for shorter tows, for out of state I use a bigger one. Weighs 830lbs. Only downside is no brakes.
Thanks for the info. ;)
The last ten days have been a blur, and a nightmare, but the car is done and on its way to Daytona for the Runoffs.
Picture not included in this copy
Picture not included in this copy
What you didn't enjoy modify parts that were supposed to fit ;)
Cool! A few local club members will be working flags & communications there. Good luck!Originally Posted by Jason@SportsCar ↑The last ten days have been a blur, and a nightmare, but the car is done and on its way to Daytona for the Runoffs.
UGH, I missed it.. I meant to watch it but got busy today... UPDATES!
you missed a pretty epic race, Jason finished 2nd after a spin\wreck at SF
Picture not included in this copy
Picture not included in this copy
Finally got the spare trans opened up, looks worse than I expected. Drove fine, other than a slight clunk when going from 5th to 4th - never even a grind from 3rd to 4th, no hint there was an issue until I found synchro teeth in the axle seal. In addition to a wasted synchro there are some broken and burned up parts. The oil sprayer broke off and the shaft it supplied got a little hot. Ordering a few replacement parts, and coating stuff this time. Still, after three years of racing with nothing more than a fluid change, I can't complain. 👍
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Wow. Any miss shifts contribute to that?
Sent from my iPod Touch
Sent from my iPod Touch
Its really hard to miss the 3-4 shift. But after three years of use, and many guest drivers, I am sure it has been well used. I know guys that are having to rebuild much more costly trans every season, so I wont complain about getting three years out of this one.Originally Posted by Bluevitz-rs ↑Wow. Any miss shifts contribute to that?
Sent from my iPod Touch
Only asked because you said the downshift was getting bad but the upshift was fine.
I had the same problem with 4th on my 6 speed transmission I built years ago. But after having it out to swap in my new turbo engine I switched to royal purple and the notchy downshift to 4th has nearly completely cleared up.
Sent from my iPod Touch
I had the same problem with 4th on my 6 speed transmission I built years ago. But after having it out to swap in my new turbo engine I switched to royal purple and the notchy downshift to 4th has nearly completely cleared up.
Sent from my iPod Touch
Going the DLC route or WPC treating the parts?
Took the car out to Auto Club Speedway over the weekend for the SCCA U.S. Majors Tour. Took the win from the pole on Saturday, and knocked another tenth off the H Prod track record, now at a 1:59.302.
Sunday we thought it was going to stay dry enough to run full slicks, was just a slight sprinkle when we headed to grid, but it started to rain hard during the race. At one time I was leading the group overall, but it was not worth pushing that hard to so I backed off a bit. Took the win in HP and finished 3rd overall.
https://www.youtube.com/watch?v=YltL_MgqkrU
Sunday we thought it was going to stay dry enough to run full slicks, was just a slight sprinkle when we headed to grid, but it started to rain hard during the race. At one time I was leading the group overall, but it was not worth pushing that hard to so I backed off a bit. Took the win in HP and finished 3rd overall.
https://www.youtube.com/watch?v=YltL_MgqkrU
i salute you for the build you have done on your car
Sent from my ASUS_Z00AD using Tapatalk
Sent from my ASUS_Z00AD using Tapatalk
Oh, the horror! Not everyone knows what those are supposed to look like, but I can appreciate what happened in there. Will you be sticking with the stock ratios still, or have you decided to tweak them based on performance at a given track?Originally Posted by Jason@SportsCar ↑Finally got the spare trans opened up, looks worse than I expected. Drove fine, other than a slight clunk when going from 5th to 4th - never even a grind from 3rd to 4th, no hint there was an issue until I found synchro teeth in the axle seal. In addition to a wasted synchro there are some broken and burned up parts. The oil sprayer broke off and the shaft it supplied got a little hot. Ordering a few replacement parts, and coating stuff this time. Still, after three years of racing with nothing more than a fluid change, I can't complain. 👍
Stock ratios? We have been using the Kaaz gear set since 2012. Nothing will be changing.Originally Posted by CrankyOldMan ↑Oh, the horror! Not everyone knows what those are supposed to look like, but I can appreciate what happened in there. Will you be sticking with the stock ratios still, or have you decided to tweak them based on performance at a given track?
Crap, there I go showing my age again. You're still using the stock final drive, yes?Originally Posted by Jason@SportsCar ↑Stock ratios? We have been using the Kaaz gear set since 2012. Nothing will be changing.
Not since 2010, we use the xB final drive.Originally Posted by CrankyOldMan ↑Crap, there I go showing my age again. You're still using the stock final drive, yes?
What GoPro are you using. looks so crisp.. better then before unless my new glasses are clearer.
Love watching your video's.
Love watching your video's.
Have been using the same GoPro Hero 3+ for a couple of years... The difference in clarity is due to the windshield being tinted.Originally Posted by ilikerice ↑What GoPro are you using. looks so crisp.. better then before unless my new glasses are clearer.
Love watching your video's.
Cool, learned something newOriginally Posted by Jason@SportsCar ↑Have been using the same GoPro Hero 3+ for a couple of years... The difference in clarity is due to the windshield being tinted.
The 2017 race season is under way. Just head a double header at Auto Club Speedway. Took the H Prod pole, claimed the win both days, and reset the record that I set at this event last year. Looking forward to Indy in October.
https://youtu.be/FlX4IYoBeNE
https://youtu.be/FlX4IYoBeNE
Top shelf level of cool.
Any chance you'll get to MIS this summer?
My Idol
Good news bad news kind of day... We know we have the 2015 to use until the end of the year, so Indy is a go. However, we know after Dec 2017 this tub goes to the crusher. Nice I don't have to wonder when the call is going to come, and I know it wont interrupt the season, but will be sad to see it go.
sad face.
What determines how long you can use a chassis?Originally Posted by Jason@SportsCar ↑Good news bad news kind of day... We know we have the 2015 to use until the end of the year, so Indy is a go. However, we know after Dec 2017 this tub goes to the crusher. Nice I don't have to wonder when the call is going to come, and I know it wont interrupt the season, but will be sad to see it go.
The Feds. A preproduction car can only be here for a limited number of years before it has to be shipped back to its country of origin or crushed. Standard is three years, you can get waivers that allow for two additional years. This chassis has been here since 2014, so we are already into a waiver to get the 2017 season out of it. And with changes on the way for 2018 no reason to keep this car on the books.Originally Posted by ern-diz ↑What determines how long you can use a chassis?
Very interesting, thanks.Originally Posted by Jason@SportsCar ↑The Feds. A preproduction car can only be here for a limited number of years before it has to be shipped back to its country of origin or crushed. Standard is three years, you can get waivers that allow for two additional years. This chassis has been here since 2014, so we are already into a waiver to get the 2017 season out of it. And with changes on the way for 2018 no reason to keep this car on the books.
If I may ask, are you sticking with the Yaris platform thereafter?
Not sure. Might take a break.Originally Posted by ern-diz ↑Very interesting, thanks.
If I may ask, are you sticking with the Yaris platform thereafter?
All the best with whatever you decide!Originally Posted by Jason@SportsCar ↑Not sure. Might take a break.
Subscribed to your youtube last night and enjoyed a good hour of your vids, Jason. Can't wait to watch more and see the new seasons as well. Thanks for sharing them!
Hope you continue with the new platform next year, but I do understand taking a break. Love to see your progress and the amount of TV time you get with that bulky yaris with the crx's and sprites
A couple of laps from Willow Springs last weekend: https://www.youtube.com/watch?v=CJPr...ature=youtu.be
Man, that looked fun. That spin out at 46 seconds, though!
The part you dont see is one of the cars that was behind me hitting him as he sat in the middle of the track. 🙁Originally Posted by ern-diz ↑Man, that looked fun. That spin out at 46 seconds, though!
Ugh, bummer. Hopefully no serious injuries.Originally Posted by Jason@SportsCar ↑The part you dont see is one of the cars that was behind me hitting him as he sat in the middle of the track. 🙁
Tempting...
Picture not included in this copy
Picture not included in this copy
Where did that come from? LOL
It was in the DUB SEMA car.Originally Posted by Bluevitz-rs ↑Where did that come from? LOL
Is it actually built or is it just a stock motor with and side mount turbo?
99% sure its a stock motor with a turbo tossed in for looks. From what I gather this was not supposed to be on there, could be the reason nearly every SEMA release has the hood down, and never makes mention of the turbo.Originally Posted by Bluevitz-rs ↑Is it actually built or is it just a stock motor with and side mount turbo?
Probably needed the turbo to move them dub wheels. ;)
Sorry, I know this is a little lazy but can you tell me when you'll be in Indy? It looks like you'll be able to keep the Yaris this year and I'd love to see it in action!
Originally Posted by toad ↑Sorry, I know this is a little lazy but can you tell me when you'll be in Indy? It looks like you'll be able to keep the Yaris this year and I'd love to see it in action!
https://www.scca.com/runoffs
Steve