Yarisworld Archive

Another S/C'd member worried about his AFR

182 posts · 47,610 views · page 2 of 4

Replies continued

LtNoogieThread starterWest Hills, CA · Mar 24, 2009#51
That's why I'm leaving this to a professional tuner. I'd end up with stacks of different size injectors and totally frustrated.
turboecho2005Ottawa, Ontario · Mar 24, 2009#52
Megasquirt is a viable option! it can be done... and it has been done....

I am running it in my car. Its not overly complicated either if you have a little bit of electronics background. I have helped to install and tune with megasquirt before.

Any shop should be able to make you a wiring harness.
Nexus1155Dorchester · Mar 24, 2009#53
I am running it in my car. Its not overly complicated either if you have a little bit of electronics background. I have helped to install and tune with megasquirt before.
I don't know if they have a standalone and a plug in play but ive only seen standalone, but im sure you can wire it in tandem.

did you install it on a yaris or an echo?
LtNoogieThread starterWest Hills, CA · Mar 24, 2009#54
Ok, I just spent a half hour on the phone with dyno guy. He does not recommend that I start with larger injectors or more powerful fuel pump. He recommends a boost-sensitive adjustable fuel pressure regulator.

He also states that his expertise is with muscle cars and not ligament cars. (my words 😆)

Hey, we have enough Blitz'd owners on this forum now that each of us should try one tuning method and report back. And then we slowly go from there!👍

I hear crickets chirping.
RagnaCaTVillalba, Puerto Rico · Mar 24, 2009#55
Originally Posted by LtNoogie ↑
I can't wait to see what a properly tuned Blitz'd Yaris can put out. I know we've been admonished not to put larger injectors on this car but hear me out on this theory.

What if the current fuel system with the Blitz piggyback fuel controller cannot pump enough fuel into the cylinders during WOT, leading to a lean condition. The ECU detects pre-ignition and has to retard timing to protect the engine, and as a consequence robs us of the maximum power the S/C can put out.

If I put slightly, not hugely, larger injectors in the car, it may run less lean during WOT and the ignition retard is less, giving more power. During idle or light throttle, the ECU detects a rich condition from the O2 sensor and is able to dial back the fuel to maintain proper AFR. Remember, I said slightly larger injectors, not fire hoses. If the increase in fuel is within the ECU's cabability to control, that could just work.

Anyhow, that's the theory I want to present to my dyno guy if I have him tune the car.
This is the smartest post, try OEM injectors from a 1.8 like corolla or XD could help you out??? 👍 i would go for it I swapped camry 2.0 3S-FE injectors on a corolla 1.6 4A-FE modded and got almost 2 hp at WOT and that was an N/A setup you are FI 🤷
whooppee777Maryland · Mar 24, 2009#56
at a local auto-x event this weekend i had a nice chat with a turbo charged xa and he told me that he was running the blitz supercharger with nitrous before going turbo (he's blown his engine 5 times)

he said he had a lot of issues with the belt slipping and asked him about a/f ratios and he said that the blitz kit really has the stock injectors pushed to its limits.

now this guy also works at the shop in northern virginia which has a high reutation so this isnt some averge joe, hes a tech at this shop that knows what hes talking about.

sounds like bigger injectors r the way to go and a stronger fuel pump would also help. an adjustable fuel pump is not an option on our cars. see cali's thread on his turbo build for the explanation
whooppee777Maryland · Mar 24, 2009#57
Originally Posted by CASTREX ↑
Theoretically you could tune the car with the Camcom... however, I haven't seen any camcom sucsesfully installed in a Yaris.... yet.
the tein yaris had one successfully tuned with the camcom, it got like an additional 10 wheel hp/10 pounds of torque its in an issue of siphon. i cant remember who tuned it though
LtNoogieThread starterWest Hills, CA · Mar 24, 2009#58
Not adustable fuel pump. Adjustable fuel pressure regulator. Dyno guy is guessing that the fuel pump may be putting out sufficient max pressure but it could be regulated down too low for when we're boosting. A boost-sensitive fuel pressure regulator would tap into the vacuum line at the intake manifold and increase pressure when it senses boost pressures.

I'm starting my Internet research now.
whooppee777Maryland · Mar 24, 2009#59
Originally Posted by Yaris T-Sport ↑
yeah, but the Tein yaris has the Greddy SC instead🙂
yea i know but before the supercharger it was using the camcom, thats the important thing people either dont know or seem to forget
CTScottUSA, CT · Mar 24, 2009#60
I've been following this thread and doing some research. I think the CAMCON-T has a lot of potential with this issue (and it is fully compatible with the Yaris 1NZFE):

http://www.powerenterpriseusa.net/pr...con/camcon.htm

TOYOTA VVT-i & VVTL-i
The CAMCON-T controls the VVT-I timing +/- 20 degree in 15 different points of 500rpm increments within 2000rpm to 9000rpm Range.

A/F is controlled -10% to +20% in 17 different points of 500 rpm increments within the range of 1000rpm to 9000rpm.
Nexus1155Dorchester · Mar 24, 2009#62
if you're already taxing out the injectors why add more pressure to them! its like adding to the problem lol, especially if the fuel pump is not adequate enough as well
LtNoogieThread starterWest Hills, CA · Mar 24, 2009#63
Problem is there's no proof as to why the engine is starved for fuel. Not long enough duty cycle? There's no way to know if we're running at 80% duty cycle is there? Not enough fuel pressure? Not sure how to measure that under load.

Some of this is trial and error and hopefully the sharing of experiences on the SAME platform. It's nice to know what worked on a totally different car but...
jkuchtaL.A. · Mar 24, 2009#64
Adding a little more pressure to the injectors shouldn't be a problem, and would be a good way to add a little more fuel.

The problem is the pump itself and the type of fuel system we have.

The fuel system is a returnless system...which means that fuel pressure changes are brought about by speeding up or slowing down the pump. To add a boost-referanced regulator you'd need to not only boost the pump pressure up over what the max fuel pressure would be, but you would also need to add a fuel return line back to the tank.

This is not impossible, but is a little work.

What someone ought to do is referance the pump voltage to the boost pressure. If it's not too taxing on the pump, that solution might circumvent the need for a return line. I have no idea what the ECU would have to say about that though.
PETERPOOPOahu · Mar 24, 2009#65
The thought of slightly larger injectors seems to be worth trying. I just got my 1zz throttle body in the mail that I ordered weeks ago. I'll wait to put that on later.
LtNoogieThread starterWest Hills, CA · Mar 24, 2009#66
Originally Posted by jkuchta ↑
Adding a little more pressure to the injectors shouldn't be a problem, and would be a good way to add a little more fuel.

The problem is the pump itself and the type of fuel system we have.

The fuel system is a returnless system...which means that fuel pressure changes are brought about by speeding up or slowing down the pump. To add a boost-referanced regulator you'd need to not only boost the pump pressure up over what the max fuel pressure would be, but you would also need to add a fuel return line back to the tank.

This is not impossible, but is a little work.

What someone ought to do is referance the pump voltage to the boost pressure. If it's not too taxing on the pump, that solution might circumvent the need for a return line. I have no idea what the ECU would have to say about that though.
I need to search the service manual to see if it gives the output fuel pressure of the OEM pump.

Originally Posted by PETERPOOP ↑
The thought of slightly larger injectors seems to be worth trying. I just got my 1zz throttle body in the mail that I ordered weeks ago. I'll wait to put that on later.
Like I said, someone should try one method and I'll try another. But Peter, you've got to get some instrumentation so that you can see a before and after reading. No more butt dyno. We now know yours measures too high.😆
Nexus1155Dorchester · Mar 24, 2009#67
i think the cars would be better off doing the garm conversion with the fuel system. But there would be an easy way to rig up some electricals to fool the system within a certain range. Worth a shot!!!!
PETERPOOPOahu · Mar 24, 2009#68
Originally Posted by LtNoogie ↑
I need to search the service manual to see if it gives the output fuel pressure of the OEM pump.



Like I said, someone should try one method and I'll try another. But Peter, you've got to get some instrumentation so that you can see a before and after reading. No more butt dyno. We now know yours measures too high.😆
My butt is too sensative I guess. I will have the scangauge II soon. I am willing to try the larger injectors. What about a combination of slightly larger injectors and the 1zz tb?
LtNoogieThread starterWest Hills, CA · Mar 24, 2009#69
If you more than one thing at a time, you'll never know which item contributed to the gain or loss in power.

I honestly do not know whether it was my intake, header, exhaust, or pulleys that changed the way the car ran. I did them all at nearly the same time. Maybe one of the mods was useless. I don't know.
PETERPOOPOahu · Mar 24, 2009#70
Well I need to look for some 1zz fuel injectors now. I'll try those on, get some numbers, and then later, put the 1zz tb on that I have. Maybe they will equal eachother out?
dallasCanada · Mar 25, 2009#71
You guys are doing some really great work at trying to figure out the lean condition. I'm sure there has to be 30 hp with a proper tune.
You would think the fuel pump can handle the volume of fuel needed to run 120hp, I think the problem must be somewhere else. it must be in the management, injectors, etc. I find it hard to believe that the car cannot compensate for a 20 hp increase. Has Blitz responded with anything?
Nexus1155Dorchester · Mar 25, 2009#72
unlikely, but it wont be effective without tuning. You add more air youre going to need more fueling regardless. Might as well toss them both on, youd probably be in a situation a S load better than you are now!!!! Just to test it at least, make sure to have a wideband with you
PETERPOOPOahu · Mar 25, 2009#73
no wideband here. you think i got 350$ for a gauge!? ;) i'll get one eventually. I'll have the scangauge on when I put the larger injectors and then eventually the 1zz throttle body.
PETERPOOPOahu · Mar 25, 2009#74
Originally Posted by dallas ↑
Has Blitz responded with anything?
Garm will let us know when they do. He sent them my a/f readings.
whooppee777Maryland · Mar 25, 2009#75
im going to use my blitz fuel controller to tweak the a/f ratios to where they should b
kurokoma-kunmy own little world · Mar 25, 2009#76
Originally Posted by LtNoogie ↑
I hear crickets chirping.
Ok well, here are my thoughts.

I'm not convinced that injector volume is the issue... the stockers are rated at 210cc? (someone please correct me if that's wrong) which should be good for 130 hp. But I'm no expert and I guess there's only one real way to find out, so I'll be very interested to see anyone's results with larger injectors (fuel pump, pressure regulator, etc).

The main issue for me is that I have neither the funds, time, access to professional tuning, nor personal interest enough to justify f***ing with the fuel system, at least not right now. Reason 1: the "plug + play" nature of the Blitz kit was one of the primary reasons for it's appeal to me, and I'd kinda like to just race and enjoy the car as-is for a few months. Reason 2: if I was gonna go to that much trouble I've have gone turbo, where the money and effort invested in tuning promises much greater payoff.

Now, a relatively simple mechanical upgrade intrigues me a great deal, which is why I've expressed interest in using my car as the guinea pig for the pulleys NST has said they are willing to develop (overdrive crank + u/d w/p). From what I can gather this set up should also help with any belt slip issues. The question of whether the fuel system can keep up with the increased boost produced has been raised--if it can't, then frankly I might abandon the project at that point... so maybe one of you interested in altering your fuel system woudl be a better candidate... if you think so, you might want to talk to Garm or Mike at NST about it.
LtNoogieThread starterWest Hills, CA · Mar 25, 2009#77
KK,

I too would have preferred that this was a pure bolt-on kit but I guess the word tuning must be an analogy to dialing in a radio to get the absolute best performance. While I still have this wild hair up my wazoo, I'm going to research this with consultation from my dyno guy. Believe me, Google and I are good friends.

No offense to your post but I need published numbers now for how our little car was spec'd. I've posted a request for information in the Performance thread. Anybody who can dig up published information is welcome to post it in that thread.

I have access to some of those things you mentioned. Time is tight so it takes me longer to get around to it. (it took me four months to get my gauges all hooked up)

So, have patience. If you see a Blazing Blue AT LB cream your time on YOUR autox course, ask the driver about his fuel system mods. Then refer him to me.😆
kurokoma-kunmy own little world · Mar 25, 2009#78
Originally Posted by LtNoogie ↑
KK,

I too would have preferred that this was a pure bolt-on kit but I guess the word tuning must be an analogy to dialing in a radio to get the absolute best performance. While I still have this wild hair up my wazoo, I'm going to research this with consultation from my dyno guy. Believe me, Google and I are good friends.

No offense to your post but I need published numbers now for how our little car was spec'd. I've posted a request for information in the Performance thread. Anybody who can dig up published information is welcome to post it in that thread.

I have access to some of those things you mentioned. Time is tight so it takes me longer to get around to it. (it took me four months to get my gauges all hooked up)

So, have patience. If you see a Blazing Blue AT LB cream your time on YOUR autox course, ask the driver about his fuel system mods. Then refer him to me.😆
You asked for opinions of other s/c owners, just my 2 cents. I dunno... I guess if I thought hp was the only route to autocross "victory" I'd have chosen a different car... for now I plan to focus on tightening the loose nut behind the wheel 😆. But for me it's all just for fun anyway, and for now I've pretty much had all the "fun" tinkering with the car I care for.

As you were saying yourself just the other day, I'm not eager to be the first to blow up my motor, but who knows, in time I may change my tune too (literally, lol). Besides, when I bought the Blitz kit I was told I could expect up to an additional 30 hp: you are getting 27 hp; if I see similar results from this (relatively) stable and trouble-free upgrade I'll happily say I got a fair shake from Blitz. But as I said, I'll be very interested to see everyone's results with experiments, and sincerely wish everyone the best of luck 🙂

I assume you've been doing some reading around on scionlife too, since they have been using the same engine for longer and therefore are further ahead in their projects. It's tough to sort out the info from the asshattery at times, but good info to be had there.
eTiMaGoBangkok, Thailand · Mar 25, 2009#79
Long, since you are the best equipped (SC + Wideband + Scangauge), I'm thinking of a few tests you could do to assess the functionality of the blitz fuel controller.

We need to answer 2 main questions, I believe:

1) Is the Blitz fuel controller working as expected, trying to force more fuel in the system?
2) If so, why does it not seem to do it at WOT (hence the lean condition)?

If I am not mistaken, the Scangauge should be able to display long term and short term fuel trims, right? I think this is the key to see how it is trying to fight the stock ECU.

As I mentioned in the brainstorming thread, any piggyback that tries to make the mixture richer, will be foiled by the O2 sensors, as these will detect the lower AFR. The way they feed this information back to the ECU is through the aforementioned fuel trims.

So, what I think we should do is set up a baseline fuel trim. Please keep in mind I am saying this out of theory and just a decent understanding of this ECU! Anyway, the first step would be make sure that you can actually get a reading for the fuel trims on your scangauge! If that's the case, the next step would be to clear the ECU's stored information so we can start with a clean slate. You could disconnect the battery, or pull out the EFI fuse which I believe is in the fuse box that's in the engine bay.

As a result fuel trims should be both at 0. Next, you'd need to drive around normally, but with the SC switch to OFF, and if possible with the fuel controller disconnected. This way we can know what is the default trims that your stock engine setup will generate. I am not sure over what period of time the long term fuel trim is calculated, but it is essentially an averaging of the short term trim over time. I'd guess a day of normal driving should be enough. Also, during this time, you can use your wideband to verify that the AF ratio will be pretty steady around 14.7 as this is what the ECU strives to achieve.

So once we have this data, it would be time to see how the Blitz fuel controller reacts when the car is in closed loop, SC activated and car driven in a normal fashion. So, reset the ECU, reconnect the fuel controller, set the SC to LOW, and drive! Try to avoid mashing the pedal and going over 4000RPM too as these would trigger open loop mode and we want to keep that out of the equation.
If the fuel controller is working as expected, it will try to force a rich mixture, which the ECU will then counteract. You will *probably* see a rich mixture on your wideband at first, until the ECU calculates the correct fuel trim to counter that. So, after a day of driving around like this, we would need to compare the fuel trim values to our baseline. If we see pretty big negative fuel trim values, this means the fuel controller has worked as expected, and the ECU has responded as expected.

If the fuel trim is unchanged from stock, then there are two possible explanations: The fuel controller is not working, or it is smart enough to know to leave the ECU alone when in closed loop mode (not likely)

Now for Part 2, WOT diagnostics, unfortunately I can find very little information about open loop operation in the manuals, so it'd be quite hard to test anything properly.

Only thing I can think of, is to compare your wideband readings at WOT with the fuel controller unplugged, and then again with it plugged in, under the same conditions (reset ECU before each test) and see if there is any difference in the readings.

I know we can't really compare readings between our cars which are modified quite differently, plus the USDM and Thai ECUs are different, but I have a basic narrowband AFR gauge, and I can see, when I push the car into open loop, the needle jumps up to 12:1, even as rich as 11:1 sometimes...

So... do you feel like giving that a try?

Oh and on the subject of the stock injectors reaching their limit, those work using PWM, I think the only way to see their duty cycle would be to connect an oscilloscope or similar? And, even if you were to put in bigger injectors, I think you'd hit the same hurdle, the ECU will detect too much fuel and trim it back. Although, under open loop, it may just work... hmmmmmm
eTiMaGoBangkok, Thailand · Mar 25, 2009#80
actually... better ignore all that for now, it seems the long term fuel trip is nonvolatile so resetting the ECU will not affect it, you'd need the proper Toyota scan tool to reset it 🙁
Doc ZaiusOttawa, ON, Canada · Mar 25, 2009#81
Wow... Thomas writes a lot! 😛

You guys (& gals) impress me... lots of good ideas and willingness. I'm more in KK's boat though... things have been ok for me (more-or-less), and I'm hoping to do as little as possible from now on. Wow, I'm lazy!

BTW, after having driving around with my 'charger turned off most of the winter and having some weird idling issues, my Toyota tech said my fuel trim was at -15% (trying to lean it out). Food for thought. I'll take it to him again later in the spring once I've been driving around with the S/C on for a while and see if there's any change.
LtNoogieThread starterWest Hills, CA · Mar 25, 2009#82
Originally Posted by eTiMaGo ↑
If I am not mistaken, the Scangauge should be able to display long term and short term fuel trims, right? I think this is the key to see how it is trying to fight the stock ECU.
I did not think the ScanGauge could display fuel trim. I'll have to look it up in the manual. If anyone knows how to program it to do so, you can save me the research.

What kind of units would it be displayed as?
LtNoogieThread starterWest Hills, CA · Mar 25, 2009#83
Ok, you guys wait until my next dyno pull after my tuning. When you see my 119HP up from the 117HP on the last pull, you'll be jealous.😛
beardaGermantown, MD · Mar 25, 2009#84
Originally Posted by whooppee777 ↑
now this guy also works at the shop in northern virginia which has a high reutation so this isnt some averge joe, hes a tech at this shop that knows what hes talking about.
Which shop is he running out of? Ptuning?
turboecho2005Ottawa, Ontario · Mar 25, 2009#85
Originally Posted by Nexus1155 ↑
I don't know if they have a standalone and a plug in play but ive only seen standalone, but im sure you can wire it in tandem.

did you install it on a yaris or an echo?
Megasquirt can be used both as a standalone or a piggyback but its not plug and play.

It was used as a piggyback in my echo when i still has the 1nzfe motor. Timing was still controlled via the stock ecu. The megasquirt took care of fuel.

There was an issue trying to control the VVTi (this was back in 2006) but i am sure someone has figured it out by now. However controlling VVT on the blacktop motor wasn't an issue.
HTM Yarissouth Carolina · Mar 25, 2009#86
I think you peeps are looking in the wrong place . I bet if you put your stock exhaust back on you will find your HP and torque . Remember that thing called "back pressure" . You peeps have opened your exhaust too much , IMO .
Opening an exhaust too much will result in a loss of HP and torque . Either you need more airflow to fit your exhaust or you need to downsize your exhaust to create the proper back pressure .

Want proof ? Just check out Noogie vs Poop setup . Poop has the larger exhaust and lower numbers .......
LtNoogieThread starterWest Hills, CA · Mar 25, 2009#87
Originally Posted by HTM Yaris ↑
Want proof ? Just check out Noogie vs Poop setup . Poop has the larger exhaust and lower numbers .......
Ooo... don't remind him of that more that three more times!🙂
kurokoma-kunmy own little world · Mar 25, 2009#88
Originally Posted by LtNoogie ↑
Ok, you guys wait until my next dyno pull after my tuning. When you see my 119HP up from the 117HP on the last pull, you'll be jealous.😛
*sigh*

it's true 🙄
PETERPOOPOahu · Mar 25, 2009#89
Originally Posted by HTM Yaris ↑
I think you peeps are looking in the wrong place . I bet if you put your stock exhaust back on you will find your HP and torque . Remember that thing called "back pressure" . You peeps have opened your exhaust too much , IMO .
Opening an exhaust too much will result in a loss of HP and torque . Either you need more airflow to fit your exhaust or you need to downsize your exhaust to create the proper back pressure .

Want proof ? Just check out Noogie vs Poop setup . Poop has the larger exhaust and lower numbers .......
I think you are wrong. You also forgot that my dyno run didn't go to 6500 RPMs like noogie's. You can see in my chart that the HP was still rising at a strong rate. It stopped at 6200 RPMs. Also, I was on a dynapack, not dynojet. Dynos are different.

I am going to dyno on a dynojet soon, run it to 6500rpms, and I can guarantee you it will be higher than 117hp on the dynojet.

I do agree that my larger exhaust lost torque, but HP, especially in the higher RPMs, naw.

But I am going to be running a 2" 24" resonator and a hi flow cat soon, so that will probably bring me some back pressure/torque back.
Nexus1155Dorchester · Mar 25, 2009#90
I dunno, I mean it is a small engine, but only upping it to a 2.5 exhaust... I mean i can see a 3" losing serious pressure because its only good past 500hp, maybe you should try a 1 inch exhaust? LOL BRAAAAAT KABOOM!
PETERPOOPOahu · Mar 25, 2009#91
I have 2.25" exhaust, not 2.5".
dallasCanada · Mar 26, 2009#92
I agree that a smaller pipe diameter may help, like 2 inches, but your terminology is wrong. Backpressure is never a good thing, you do not want back pressure for ultimate horspower. What you want is no back pressure but fast exhaust gas velocity, if you go too big on the pipe diameter you loose the exhast gas velocity and the coresponding hp and torque.

Originally Posted by HTM Yaris ↑
I think you peeps are looking in the wrong place . I bet if you put your stock exhaust back on you will find your HP and torque . Remember that thing called "back pressure" . You peeps have opened your exhaust too much , IMO .
Opening an exhaust too much will result in a loss of HP and torque . Either you need more airflow to fit your exhaust or you need to downsize your exhaust to create the proper back pressure .

Want proof ? Just check out Noogie vs Poop setup . Poop has the larger exhaust and lower numbers .......
HTM Yarissouth Carolina · Mar 26, 2009#93
Back pressure is a good thing . Some not alot . Without Backpressure(BP) there isn't any exhaust gas velocity . If no BP was a good thing all the real race cars would have exhaust gas being released straight from the exhaust port . ( Yes I realize that exhaust pipes also evacuate heat )


Try this , go turn on your garden hose . See how it flows ? To increase the velocity of the flow you can do 2 things 1. increase the volume of water or 2. partially cover the end of the hose with your thumb (creating BP) .
largeorangefontSo Cal, OC · Mar 26, 2009#94
I didnt read the entire thread but think I have a decent idea of what is going on.

Here is the first thing I will say here:

Comparing results from DIFFERENT DYNOS is not accurate and a waste of time.

Different dyno manufacturers read differently, and ambient conditions change from day to day. If you have dyno results before and after a mod on the SAME dyno, generally the gain (or loss) you see is close to accurate.

At this point, it looks like that if you want to fully realize the gains from a blitz SC, you will need addtional tuning.

A fuel controller may work, but if timing is still retarded, you are only going to LOSE more power. We need to find out what that box does. Lets say all it does is retard ignition timing. Then I would say remove the bot, get a fuel controller and adjust the fueling curve, run cooler spark plugs and always run premium fuel.

Adding a rising rate FP regulator is NOT a solution for a returnless car. There is really no mechanical fix to solve this particular problem. You are going to want a piggyback ECU or a reflash.

You guys are not going to fix this with fuel system mods. I assure you, you are not running out of fuel with a ~30 HP gain.

Peterpoop,

Your exhaust is fine, I would not worry about it. If you can get something to view your ignition advance in the meantime, do so.
LtNoogieThread starterWest Hills, CA · Mar 26, 2009#95
This is what Camelll posted as to what the fuel controller hooks into.

Blitz uses: RPM, power (ig/on), 4 injectors, air flow, 2 grounds, accelerator position sensor. etimago could you post a pinout of the ecu locations?

ECU Description/ Wiring Description/ ECU Loc/ ECU color
IFG1/ RPM/ C20-81/ Yellow
IGSW/ Power (ig/on)/ A21-28/ Red
L2/ Injector/ C20-107/ Gray
L1/ Injector/ C20-108/ Lt. Blue
VG/ Air Flow/ C20-118/ Gray
E01/ Ground/ C20-45/ Brown
L3/ Injector/ C20-106/ Pink
L4/ Injector/ C20-105/ Blue
VPA/ Accel Pos Sensor/ A21-55/ Red
E01/ Ground/ C20-45/ Brown
largeorangefontSo Cal, OC · Mar 26, 2009#96
Originally Posted by camelll ↑
Cali yaris got in contact with blitz and blitz said the fuel controller is just that and does not do anything to timing. Noogie thinks the timing is being retarding because the knock sensor is picking up pre ignition.🤷
Is the black box wired to the boost control knob? If so then the boost selection could retart the timing.

If not, then he could be right. I have a knockbox that we could listen to the engine with and see if it is indeed knocking.
LtNoogieThread starterWest Hills, CA · Mar 26, 2009#97
Oops, sorry Mike. I did not realize you responded!
LtNoogieThread starterWest Hills, CA · Mar 26, 2009#98
The boost control knob determines when the blower kicks in...25% throttle position, 50% throttle position, or 75% throttle position.
LtNoogieThread starterWest Hills, CA · Mar 26, 2009#99
Originally Posted by largeorangefont ↑
Is the black box wired to the boost control knob? If so then the boost selection could retart the timing.

If not, then he could be right. I have a knockbox that we could listen to the engine with and see if it is indeed knocking.
Where in the OC are you? If I don't chicken out due to this AFR, I might just run into you at Willow Springs on April 10. You can see what the car is doing on and off boost.
largeorangefontSo Cal, OC · Mar 26, 2009#100
Originally Posted by PETERPOOP ↑
Well I need to look for some 1zz fuel injectors now. I'll try those on, get some numbers, and then later, put the 1zz tb on that I have. Maybe they will equal eachother out?
Nope. I assure you that your HP will be lower with larger injectors, and the car will run bad off boost and when cold.