Yarisworld Archive

Blitz SuperCharger Install

128 posts · 52,452 views · page 1 of 3

PETERPOOPOriginal postOahu · Mar 6, 2009#1
Will begin tomorrow. Any help would be appreciated.

I will be posting my progress and questions in here. Thanks in advance!

I will have noogie and whoope's threads open during the install!

Picture not included in this copy

Replies 127

LtNoogieWest Hills, CA · Mar 6, 2009#2
Good luck Peter. I'll be watching the thread.
tk-421Dagobah · Mar 6, 2009#3
That's sexy looking. Subscribed. 🤤
JerkrattFair Lawn, NJ · Mar 6, 2009#4
cant wait
yarisugiハワイ · Mar 6, 2009#5
I hope you do a DIY on this :) lots lots and lots of pics.👍
PETERPOOPThread starterOahu · Mar 7, 2009#6
Well the belt that came with the package is too long. It was 66.7" long. I need a 66" long belt. Whoopee told me that the one that came with his kit actually fit. He said he was the first one to have it fit. Looks I am headed to checkers tomorrow! No biggie.
808_YarisHI · Mar 7, 2009#7
Good luck with the install. I'm itching for a supercharger :(
yarisugiハワイ · Mar 7, 2009#8
The weather forecast for tomorrow - rain with possiblility of thunder showers.
PETERPOOPThread starterOahu · Mar 7, 2009#9
Nothing will stop me!
1NZYaris1New Zealand · Mar 7, 2009#10
🤤 Send it to me , i'll show you how it's done 👍
LtNoogieWest Hills, CA · Mar 7, 2009#11
Just leave that green protective sheet on the blower until the last minute to keep debris from falling in.
nisyotaOrlando, USA · Mar 7, 2009#12
not just lots of pics... but video as well!!! the sound of a supercharger going down the street or strip is awesome!!!

don't forget the video... :D
PETERPOOPThread starterOahu · Mar 7, 2009#13
HAH, you obviously don't know who I am. I LOVE videos! I have always asked the people with turbo or S/C to make videos, but they don't. Jerks! ;)

Even whoopee said he'll make so much videos, that i'll get sick of it! But he couldn't even get one to work..

Once this thing is on and working and no cels are on, I will be having plenty and plenty of videos! TRUST ME!
fujiHonolulu · Mar 7, 2009#14
I would like to see this after it is installed!
marcustoronto, canada · Mar 7, 2009#15
im inlove with that piece..*sigh*
PETERPOOPThread starterOahu · Mar 7, 2009#16
Just got the crank pulley on, time to start on the S/C. Ofcourse after I eat a burrito.
808_YarisHI · Mar 7, 2009#17
starting soon?!?
cali yarisCanoga Park, CA · Mar 7, 2009#18
what kind of burrito? pineapple? 😆
whooppee777Maryland · Mar 7, 2009#19
Originally Posted by PETERPOOP ↑
HAH, you obviously don't know who I am. I LOVE videos! I have always asked the people with turbo or S/C to make videos, but they don't. Jerks! ;)

Even whoopee said he'll make so much videos, that i'll get sick of it! But he couldn't even get one to work..

Once this thing is on and working and no cels are on, I will be having plenty and plenty of videos! TRUST ME!
if i hadnt lost that pulley the same day i installed it there would have been more videos.

i mostly drive with the supercharger off since i dont have the right pulley. so unless u want a video of a video of a boosted yaris with the blower turned off, that is slower than a stock yaris i'll b glad to record that. NOT

there is one more video i can upload though
PETERPOOPThread starterOahu · Mar 7, 2009#20
Well Noogie said that he left off Spacer B that is at the bottom of the blitz alternator bracket. We put it on and eyeballed it and the pulley from blitz did look out of line with the crank pulley. So we are taking off the spacer B and seeing if this works.

Originally Posted by LtNoogie ↑
The alternator goes on first with Spacer B where the installation manual says but the alternator is too far offset from the rest of the pulleys.

Picture not included in this copy

Oh yeah, others have mentioned this. The bolts all come in one bag. It is up to you to figure out which bolt is the right one to use.

Finally, we decide to not use the second Spacer B and the alternator goes on and all of the pulleys are parallel to each other and are lined up.
LtNoogieWest Hills, CA · Mar 7, 2009#21
Good to see that taking the alternator off was not a chore.
PETERPOOPThread starterOahu · Mar 7, 2009#22
I am hating how these bolts aren't listed in the instructions and you have to guess for the majority of them on which are to be used where.
LtNoogieWest Hills, CA · Mar 7, 2009#23
Yeah. KK had made a list of where each of them go. I eventually went to the auto parts store and bought a box of metric hardware. I ended up using some of it because I had used the wrong bolt and nut in another location.
PHXDEMONPhoenix, AZ · Mar 7, 2009#24
Another install 😁
PETERPOOPThread starterOahu · Mar 7, 2009#25
Originally Posted by LtNoogie ↑
Yeah. KK had made a list of where each of them go. I eventually went to the auto parts store and bought a box of metric hardware. I ended up using some of it because I had used the wrong bolt and nut in another location.

Was the wrong bolt the long one used BELOW the one where you didn't end up using spacer B? Because that bolt seems ridiculously long for that.
PETERPOOPThread starterOahu · Mar 7, 2009#26
Still going..
kurokoma-kunmy own little world · Mar 7, 2009#27
VIIIDDDDEEEEEOOOOOOOOOOOZZZZZZZZ-A 😁

Peter unless I'm seeing things wrong I think that top alternator bolt is in the wrong hole in the bracket. I did the exact same thing, see the pic.
Properly installed it goes in the other top hole (the red pointer), sorry i didn't get a shot of it on there the right way.

Also maybe it's just the angle of your pic, but that a/c line looks awful close to making contact with the belt once its installed over the pulley on the compressor, it might be easier to secure them out of the way before the compressor goes on... I had to adjust mine afterwards and its a real b*itch even if you have skinny arms 😉

Lt Noogie is correct, I sent Garm an edited version of the instructions with the hardware issues clarified as well as I could. For example in the previous English instructions the steps refer to bolt numbers, but there are no numbers next to items in the parts list... so I numbered them by comparing them to the original Japanese booklet. Sorry, I don't have a copy here or I'd PM it to yuh.

Picture not included in this copy
PETERPOOPThread starterOahu · Mar 7, 2009#28
Actually, that picture was from noogie's install. I believe we have it in the right spot. We are now having trouble with the middle bolt that goes in the manifold. It's impossible! Did you guys remove the fuel rail completely? Or just moved it around. We didn't remove the two bolts that were on the side of the fuel rail, just the ones in front. Didn't think it would have made a difference if we removed the ones on the side.
kurokoma-kunmy own little world · Mar 7, 2009#29
Originally Posted by PETERPOOP ↑
Actually, that picture was from noogie's install. I believe we have it in the right spot. We are now having trouble with the middle bolt that goes in the manifold. It's impossible! Did you guys remove the fuel rail completely? Or just moved it around. We didn't remove the two bolts that were on the side of the fuel rail, just the ones in front. Didn't think it would have made a difference if we removed the ones on the side.
Yes undo all of them. If you don't want to completely remove the fuel rail, here's a trick for getting the nut on that center stud in the cylinder head. Use a ratcheting swiveling box end wrench.

Wrap a narrow strip of duct tape around the outer edge of nut, in the opposite direction of tightening, leaving a long tail of tape... you will stick this to the wrench handle.

Wedge the taped nut into the flat end of wrench, insert into the space between fuel rail and manifold, place the nut over the stud and try to turn.

After it catches even one thread, you can lift the tool straight up and off the nut. Then use it to press the flat surface of the nut while you pull off the tape strip--the action of pulling the tape off tightens the nut a couple more turns.

Then you can get in there with the ratcheting end to finish tightening.
PETERPOOPThread starterOahu · Mar 7, 2009#30
K did that. Still going..
LtNoogieWest Hills, CA · Mar 7, 2009#31
KK is right. You have the alternator little bracket in the wrong hole. If you go to Post #59 of my thread, you'll see that I had to drop it to the hole below.

I must be the only one who did not have a problem with that middle manifold nut.

Keep going. Be strong.😁
PETERPOOPThread starterOahu · Mar 7, 2009#32
In the directions, it says to put 5 stud bolts into the compressor. It had the five holes circled. But there are six holes and they don't address to put a stud bolt in the sixth hole in the future steps. I was condering if you guys decided to put one in, or did you just do the five?

It's step 14 in (6) Manifold and Compressor Mounting
PETERPOOPThread starterOahu · Mar 7, 2009#33
Originally Posted by LtNoogie ↑
KK is right. You have the alternator little bracket in the wrong hole. If you go to Post #59 of my thread, you'll see that I had to drop it to the hole below.

Yah, we saw that! Good thing we browsed ahead in your thread.
LtNoogieWest Hills, CA · Mar 7, 2009#34
There may be a stud that comes out of the intake manifold. I don't remember. Check it.

Nevermind. Step 15 tells you what to do with the last hole.
kurokoma-kunmy own little world · Mar 7, 2009#35
Originally Posted by PETERPOOP ↑
In the directions, it says to put 5 stud bolts into the compressor. It had the five holes circled. But there are six holes and they don't address to put a stud bolt in the sixth hole in the future steps. I was condering if you guys decided to put one in, or did you just do the five?

It's step 14 in (6) Manifold and Compressor Mounting
Do just what it says...you will see why in the next step... in that 6th hole you should put a single M6x16 bolt... you have 7 of these, most of which will be used to attach the inlet pipe later

dayam I sure do wish I had those fixed up instruction to send you, or that Garm was here to do it

oh yeah don't neglect to install that dipstick bracket like it says in the "hint" under step 16, it will save you headaches when it comes time to reinstall the dipstick
LtNoogieWest Hills, CA · Mar 7, 2009#36
We sound like a bunch of midwives.

Push! Push!
kurokoma-kunmy own little world · Mar 7, 2009#37
lol 🤣 ah just wait til you hear the baby wailing peter

then its time for VIDDEEEEEOOOOOOOOOOOOOOZZZZZ yuh bum
PETERPOOPThread starterOahu · Mar 7, 2009#38
Totally didn't see that part about the 6th hole. We are kicking ourselves in the butt now. Still going...

Oh yah, I wish I knew about needing a longer vacuum hose! All the stores are closed and I am left with the stock vacuum hose. Will skip that and press on! Neeeed fooood.....can't thinkk......foood foood foood!
kurokoma-kunmy own little world · Mar 7, 2009#39
you are gonna have a hella hard time getting that vac hose on the fitting if you skip ahead and reinstall the throttle body in front of it, the fitting is well buried under there and about zero clearance... not tellin yuh what to do, just an observation based on experience 😉

so, whats for dinner? 😁
LtNoogieWest Hills, CA · Mar 7, 2009#40
You really should get some vacuum hose.

Or you could skip ahead and fight the belt.
PETERPOOPThread starterOahu · Mar 7, 2009#41
Eggs, potatos, and toast. I know I really should get it, but the stores are closed. We already re-installed the TB and Afe intake. No worries KK, we got it. ;)

The belt will go on tomorrow. Just finished putting the pulley on and the bolt for the 6th hole that was skipped. Tomorrow will be the belt, putting on longer vacuum hose, and wiring! Then whining all around town!
yarisugiハワイ · Mar 7, 2009#42
Damn. I was hoping you'd beat the record for fastest install. But staying alive is more important I guess. Food is good.

(When you're done, you can help me with foglight installation! :) DIY section didn't really help)
LtNoogieWest Hills, CA · Mar 7, 2009#43
You made good progress.
PETERPOOPThread starterOahu · Mar 8, 2009#44
Originally Posted by yarisugi ↑
Damn. I was hoping you'd beat the record for fastest install. But staying alive is more important I guess. Food is good.

(When you're done, you can help me with foglight installation! :) DIY section didn't really help)

Yah definately not beating any records. For the wiring, it's going to be solder'd. So that'll take some time.

You should meet up with 808_Yaris. He lives in town and could probably help you. I have aftermarket foglights in, but they aren't even wired up yet. I haven't had time to do it, and especially now i don't. hah.

Oh yah, strange thing, I didn't have to file down the manifold for it to fit. So that saved some time!

Getting there...

Picture not included in this copy


Thanks for the tips noogie and KK!
cali yarisCanoga Park, CA · Mar 8, 2009#45
I sent him your edited instructions!
eTiMaGoBangkok, Thailand · Mar 8, 2009#46
looking gooood! and awesome teamwork 👍
PETERPOOPThread starterOahu · Mar 8, 2009#47
Originally Posted by cali yaris ↑
I sent him your edited instructions!
You did You did. I missed a step, that's all. KK thought I didn't have the up to date instructions. I do wish though that the bolts were labeled and were numbered like the other blitz parts! Oh wells.
kurokoma-kunmy own little world · Mar 8, 2009#48
Originally Posted by PETERPOOP ↑
I am hating how these bolts aren't listed in the instructions...
yah based on that I assumed... sheesh, I coulda just said RTFM 🙄

Good luck with the rest of of it PP!

PS--VIDEOS, mofuggah
PETERPOOPThread starterOahu · Mar 8, 2009#49
Just some pics before we start working on it again...

Got the belt on. Getting the longer vacuum hose now and ordering some NGK iridium spark plugs from the local Napa Auto Parts. Should be in tomorrow.

Picture not included in this copy

Picture not included in this copy


Here's my other "car" that I'm driving while the Yaris is down. The thing that kills me is, it was shiny clean under the cover, then when i have to drive it.....it's pouring rain! Oh wells, it's a truck.

Picture not included in this copy

Picture not included in this copy
PHXDEMONPhoenix, AZ · Mar 8, 2009#50
Nice progress 👍