Yarisworld Archive

Blitz S/C being installed this Saturday!

178 posts · 95,086 views · page 1 of 4

LtNoogieOriginal postWest Hills, CA · Nov 14, 2008#1
My brother will help me install the supercharger tomorrow.

I'll try to take pictures along the way. Wish me luck.

Replies 177

WeeYariGeorgetown, Ontario, Canada · Nov 14, 2008#2
Luck 👍
mikenacaratoBrentwood, TN · Nov 14, 2008#3
good luck! cant wait to see the outcome!
cali yarisCanoga Park, CA · Nov 14, 2008#4
awesome, good luck!
marcustoronto, canada · Nov 14, 2008#5
good luck hope it will work out better than echohrs...he has unsolve issues with it..
PETERPOOPOahu · Nov 14, 2008#6
videos! ;)
LtNoogieThread starterWest Hills, CA · Nov 15, 2008#7
Where is the fuel pump relay? I popped off the little storage thing near the driver side knee and removed a blue relay but the car keeps running.

The drawing in the manual is not helpful so far.
TheRealEnthMiami, FL · Nov 15, 2008#8
The drawing in the manual is not helpful so far.
Lmao i picture a crappy drawing from a 3 year old
whooppee777Maryland · Nov 15, 2008#9
good luck. is this the first 2008 yaris to get a supercharger? i'm eager to see how it works out.
cali yarisCanoga Park, CA · Nov 15, 2008#10
all of the tech specs/manuals for the Yaris are in PDF's here somewhere on the site
PETERPOOPOahu · Nov 15, 2008#11
done yet? ;)
marcustoronto, canada · Nov 15, 2008#12
hes having problem already... best of luck!!
SplitEdmonton · Nov 15, 2008#13
i'm so wanting to buy a blitz supercharger but i'm just not willing to spend $3400usd on it. I remember when there was a guy selling one used on here for like $2200usd.. in retrospect i wish i would have jumped on that =/
cali yarisCanoga Park, CA · Nov 15, 2008#14
Well... if you change your mind... I have one left... 😉
cali yarisCanoga Park, CA · Nov 15, 2008#15
hes having problem already... best of luck!!
that's not nice.
marcustoronto, canada · Nov 15, 2008#16
Originally Posted by cali yaris ↑
that's not nice.
i didnt mean that to sound negative i did mention to him previously that echo had an issue with his.. and hopefully he doesnt have the same issue..
PETERPOOPOahu · Nov 15, 2008#17
Originally Posted by Split ↑
i'm so wanting to buy a blitz supercharger but i'm just not willing to spend $3400usd on it. I remember when there was a guy selling one used on here for like $2200usd.. in retrospect i wish i would have jumped on that =/

lol. garm is selling the kits cheapers than anyone i know. he's almost selling them at cost. stop being cheap. you probably voted for obama. 😉
cali yarisCanoga Park, CA · Nov 15, 2008#18
what?! dude, you really enjoy trying to piss people off.... 🙄
LtNoogieThread starterWest Hills, CA · Nov 15, 2008#19
Let's call today a day of reflection. One must reflect upon how badly you want to install the S/C yourself.

We got absolutely nothing accomplished except for the requisite bloody knuckle. I am uploading pictures to photobucket and will post pictures shortly.

Brother had to go take care of the baby so we called it quits until 0-dark-thirty tomorrow morning.
LtNoogieThread starterWest Hills, CA · Nov 15, 2008#20
From the Blitz manual:

Relieving fuel pressure on fuel pump. This prevents fuel from spraying out under pressure when you disconnect something later on that I have not read yet.

"(1) Locate and remove the fuse box panel under dash. (It is located under the dash on the driver’s side). Locate and remove fuel pump relay. It is the blue relay on the right hand side above the fuses"

Picture not included in this copy

Guess what? That blue relay isn't it! After an hour of searching for the relay and calling Toyota Service and Parts departments, THERE IS NO FREAKING FUEL PUMP RELAY.

While you have the dash torn apart, looking for the non-existent fuel pump relay, you can install your cabin air filter.👍

Picture not included in this copy

You have to depressurize the fuel system by disconnecting the connector on top of the fuel pump. That means you have to remove the rear seat.

So here's a tutorial on how to remove the rear seats on a 60/40 split seat in a Liftback.

Remove the plastic cover, exposing the two Torx bolts. You need a special Torx socket set. Remove the bolts. A hammer is recommended because the bolts are on tight.

Picture not included in this copy

Lift up the front of the seat bottom to reveal two more bolts that hold the front of the seat rail to the floor. Remove them.

Picture not included in this copy

Slide the seat forward, revealing the two rear Torx bolts on the seat bracket. Remove them.

Picture not included in this copy

Once you have removed the seat, that's when you realize the fuel pump connector is under the 60% side. 😢😢😢

More to follow
LtNoogieThread starterWest Hills, CA · Nov 15, 2008#21
Now, remove the 60% side of the rear seat. You can save yourselves some time by not removing the 40% side. But if you have done both, this is a good time to install a roll cage.😁

Remove the plastic covers hiding three Torx bolts in the front of the 60% section. Remove the bolts.

Picture not included in this copy

Lift up the seat bottom to reveal the two Torx bolts holding down the seat bracket. Remove those bolts.

Picture not included in this copy

Remove the two Torx bolts holding down the rear of seat brackets. No picture.

Lick bloodied knuckle until vampire bats stop circling.

Picture not included in this copy

Lift carpet flap, and fuel tank cover to reveal wires going into a connector at the top of the tank. Remove this connector.

Picture not included in this copy

Picture not included in this copy

At this point, start the car. The engine will die within seconds because the fuel pump has been disabled and there is no more pressure in the fuel lines.

Go home, have a beer, and plan to start again tomorrow.
LtNoogieThread starterWest Hills, CA · Nov 15, 2008#22
Originally Posted by TheRealEnth ↑
Lmao i picture a crappy drawing from a 3 year old
The manual that comes in the box is in Japanese! It's a good thing Garm sent me one written in Engrish.
SIPNGASSoutheast Wisconsin · Nov 15, 2008#23
I'm so sorry it didn't work out today. Hopefully tomorrow...

it's because you don't have the cool TRD sticker, you know. ;o)
LtNoogieThread starterWest Hills, CA · Nov 15, 2008#24
Yeah, tomorrow, the scary work starts. Once the engine pieces come off, there's no more driving it until she's put back together again.

Looks like I may be driving the Jeep for a couple of days.
cali yarisCanoga Park, CA · Nov 15, 2008#25
You'll get through it, I have faith in the NOOGIE !!
staypuftchicago · Nov 15, 2008#26
Originally Posted by Split ↑
i'm so wanting to buy a blitz supercharger but i'm just not willing to spend $3400usd on it. I remember when there was a guy selling one used on here for like $2200usd.. in retrospect i wish i would have jumped on that =/
that was 2nd hand w/o warranty, garms got brand spanking new with 1 year warranty from blitz. i didnt do the fuel pressure thing, no problems with fuel spray, it all came out the fuel rail anyway when doing that pita bolt
PETERPOOPOahu · Nov 16, 2008#27
done? :)
LtNoogieThread starterWest Hills, CA · Nov 16, 2008#28
Originally Posted by camelll ↑
I just pulled the efi fuse in the fuse box under the hood, I still had a small amount of fuel come out of the injector area though. I spent a bunch of time looking for that same relay also. There is also something about an airbag sensor in the engine compartment you can forget about that one also. I will be on here most of the day today, if you have any problems or questions just pm me and I will try to help you out as much as I can.

I've PM'd you. We are trying to put the alternator back on now and those B spacers are really confusing. Thanks
SIPNGASSoutheast Wisconsin · Nov 16, 2008#29
Sounds like this installation is QUITE the undertaking....
cali yarisCanoga Park, CA · Nov 16, 2008#30
Are Camelll's installation pics still available? He showed where those spacers go in those pics.
PETERPOOPOahu · Nov 16, 2008#31
Originally Posted by camelll ↑
What do you care? according to you the supercharger is a waste of money!
Actually i stated a S/C in a SEDAN is a waste of money. 🤣


let's see those videos noogie! muahaha
LtNoogieThread starterWest Hills, CA · Nov 16, 2008#32
Originally Posted by camelll ↑
I pm'd you LTNoogie. One of those spacers goes at the top of the bracket and the other one goes on the bottom of the bracket. Where the alternator bracket bolts up to the engine block. Sorry I was busy earlier.
Thanks, Mike. I'll post pictures later this evening. I ended up not using one of the B spacers. I'll try to explain with the photos. I will definitely give you a call as we proceed further.

Long
LtNoogieThread starterWest Hills, CA · Nov 16, 2008#33
Originally Posted by PETERPOOP ↑
done? :)
It's going slow. My brother and I are trying to decypher the grainy black and white pictures. Taking off the alternator is as hard has others have complained when trying to install the NST pulleys. Luckily I don't have to reuse the OEM bottom bolt because we stripped the head of the bolt trying to loosen it. Pictures will be posted in an hour or so.
staypuftchicago · Nov 16, 2008#34
wow, so you havent tackled the dreaded bolt behind the fuel rail yet. be prepared to start cursing alot lol, keep us updated
LtNoogieThread starterWest Hills, CA · Nov 16, 2008#35
Now that I know how to disable the fuel pump, we do so and the engine dies after a few seconds of running.

Take off the engine cover. Most of you have seen what that looks like.

Picture not included in this copy

Thanks to Camell, I do not waste time looking for the non-existent air bag sensor. Everything else proceeding OK so far. The CAI comes off, revealing the throttle body.

Picture not included in this copy

After struggling with a hard-to-reach clamp on the vacuum line to the intake manifold, the manifold comes off. No problems at all with the middle manifold bolt.

We took the dipstick off after the manifold came off. This is out of order from the instructions but much easier to do in this order.

Picture not included in this copy

Taking the alternator off was a bitch, especially the bottom bolt that it pivots on. We had a four foot breaker bar which only helped to strip the head of the bolt a little. Lot's of penetrating oil and a half hour later, the bolt comes out and the alternator comes out with it. Part of the difficulty was making sure we did not damage the NST water pump pulley which is very near where the wrench has to be to remove the bolt.

Picture not included in this copy

More blood and the difficult alternator bolt.

Picture not included in this copy

The new alternator bracket goes on. See Spacer A and Spacer B locations.

Picture not included in this copy

Another view of the new alternator bracket. The alternator will be installed upside down from the factory position.

Picture not included in this copy

The alternator goes on first with Spacer B where the installation manual says but the alternator is too far offset from the rest of the pulleys.

Picture not included in this copy

Oh yeah, others have mentioned this. The bolts all come in one bag. It is up to you to figure out which bolt is the right one to use.

Finally, we decide to not use the second Spacer B and the alternator goes on and all of the pulleys are parallel to each other and are lined up.

Wifey calls and my brother has to leave for the evening. Tomorrow, the good stuff goes on. Things are tight around the alternator if you have factory air conditioning. Extra piping and brackets that are not there in the installation manual.
LtNoogieThread starterWest Hills, CA · Nov 16, 2008#36
A couple of times, especially with the alternator, it took four hands to work everything. My hat goes off to anyone who did this by themselves.
cali yarisCanoga Park, CA · Nov 17, 2008#37
nice progress, and I bow before thee for doing it yourself. 🙇 <-- see? that's me bowing
LtNoogieThread starterWest Hills, CA · Nov 17, 2008#38
Thanks Garm. It's fun working on a car again. The last car I tore apart to work on was my 1973 Chevy Vega.

I would not recommend this to someone who does not have a second means of transportation.
LtNoogieThread starterWest Hills, CA · Nov 17, 2008#39
The A spacer was 7mm like the picture showed. The two B spacers were 4mm each. I'm kinda leery too but everything is perfectly lined up. We tried another configuration and the alternator pulley was at an angle with the others.

1 attachment not included in this copy

TEHxFALLEN V1.2Calabasas, CA · Nov 17, 2008#40
You're doing it man!! I cannot wait until you're done with this!
Doc ZaiusOttawa, ON, Canada · Nov 17, 2008#41
LtNoogie... congrats on the purchase, and on tackling the install yourself. That's what I did... it was long and tough, but feels good getting it done yourself.

Anyhow, glad you found out about the fuel pressure release... I posted in echo_hrs' old thread about that. You can find the instruction on how to do it on the first page of the Fuel section of the Yaris Factory Manual we have here on the site.

The spacers... weird... I'll double-check mine. I followed the instructions, and everything lined up properly. I'm thinking you have spacer B on either the wrong side of the alternator bracket, or it's on the wrong bolt (maybe should be on the lower bolt?).

Oh yeah, the a/c lines... mine were REALLY in the way. There is a plastic clamp holding one of them (bottom-center of your last picture on Page 3)... if you take that off, it allows you to pull them forward a fair bit... maybe an inch. I took that off, pulled them forward, and then used a bunch of big zap-straps to keep the line pulled forward and left (away from the engine). One of the bolts on the a/c line is still sticking out pretty close to the belt, and I have yet to dremel it down.

Oh yeah, the belt. If you haven't bought it yet, you need to buy a new 66" belt b/c the one that comes with the kit is too loose. But don't buy the 6-rib belt... get an 8-rib belt, and then you can simply cut it in half, and have two belts, instead of just one 4-rib belt and throwing out two ribs.

Other upcoming advice... make sure you lightly grease the fuel injector o-rings (I used WD-40... not great, but ok) when you're trying to put the fuel rail back on... that's a big one for sure... makes putting them on much easier and seats them properly. If you haven't taken the long stud bolts off the plastic manifold yet, I had to use really big vice grips to do it (with some de-seizing spray)... the little Torx heads just sheared off.

Uh... that's all I can think of for now. Good luck, and keep plugging away! My car was down for almost 3 weeks.
cali yarisCanoga Park, CA · Nov 17, 2008#42
Not any more; the correct 4-rib belt is now supplied with the kits I have.

Oh yeah, the belt. If you haven't bought it yet, you need to buy a new 66" belt b/c the one that comes with the kit is too loose. But don't buy the 6-rib belt... get an 8" belt, and then you can simply cut it in half, and have two belts, instead of just one 4-rib belt and throwing out two ribs.
Doc ZaiusOttawa, ON, Canada · Nov 17, 2008#43
Originally Posted by cali yaris ↑
Not any more; the correct 4-rib belt is now supplied with the kits I have.
COOL! 👍
cali yarisCanoga Park, CA · Nov 17, 2008#44
anyone want a hood deflector? 🙄

(sorry, couldn't help it)
TheRealEnthMiami, FL · Nov 17, 2008#45
advertising wherever i go!!!!! NOOOOOOO
LtNoogieThread starterWest Hills, CA · Nov 17, 2008#46
Originally Posted by cali yaris ↑
anyone want a hood deflector? 🙄

(sorry, couldn't help it)
I was hoping that the S/C would have to stick out through the hood like the old muscle cars but then it would be facing sideways. Kinda too weird that way.

Garm, we'll discuss hoods later. I need to PM you later about some AutoMeter gauges.
LtNoogieThread starterWest Hills, CA · Nov 17, 2008#47
Originally Posted by Doc Zaius ↑
LtNoogie... congrats on the purchase, and on tackling the install yourself. That's what I did... it was long and tough, but feels good getting it done yourself.

Uh... that's all I can think of for now. Good luck, and keep plugging away! My car was down for almost 3 weeks.
Doc, thanks for all the pointers. All this time, I thought you were the guy who did his install in 7 hours! I am hoping to get the little car running by late Wednesday night.

I am feeling the pressure to get a video for PETERPOOP.
cali yarisCanoga Park, CA · Nov 17, 2008#48
the hood deflector comment was for Doc Zaius... an inside joke, and a bad one.. 🙁
TheRealEnthMiami, FL · Nov 17, 2008#49
it was funny nonetheless =p
id3379Nov 17, 2008#50
good job so far dude, watch out for them vampire bats!