Yarisworld Archive

Blitz SuperCharger Install

128 posts · 52,452 views · page 2 of 3

Replies continued

PETERPOOPThread starterOahu · Mar 8, 2009#51
Doing the wiring now..

Noogie's S/C thread is very informative.
PETERPOOPThread starterOahu · Mar 8, 2009#52
Can't wait to put this in.

Picture not included in this copy
JerkrattFair Lawn, NJ · Mar 8, 2009#53
lol cant wait for my pay to get raised so i can start saving for everything i need for a t hehe but seriously great work so far.. im waiting for the pictures and the videos of the whinnneeeeeeeeeeeeeeeeeeeeeee
PETERPOOPThread starterOahu · Mar 8, 2009#54
Having trouble locating A21-55# on the 60 pin harness for the ECU. The wiring diagram doesn't list it. What the..
CTScottUSA, CT · Mar 8, 2009#55
Originally Posted by PETERPOOP ↑
Having trouble locating A21-55# on the 60 pin harness for the ECU. The wiring diagram doesn't list it. What the..
It's the red wire (VPA) from the accelerator position sensor to the ECU:


Picture not included in this copy

1 attachment not included in this copy

PETERPOOPThread starterOahu · Mar 8, 2009#56
Thanks for that thing! The part that says A21 on the top is in japanese on my instructions. And it doesn't have all the numbers!
nisyotaOrlando, USA · Mar 8, 2009#57
so... is it installed yet? :D
LtNoogieWest Hills, CA · Mar 8, 2009#58
Peter. Close your eyes and just use the Force.🙄 j/k

I don't think I read much of the instructions during this part of the installation. I followed the wiring diagram and counted pins from the edge of ECU connectors.

This is where you have to be very careful that you are oriented correctly to the diagram. My brother and I independently counted out and called out what color wire should be worked on next. We only proceeded if we argreed upon the color of the harness wire.
PETERPOOPThread starterOahu · Mar 8, 2009#59
soldering and shrink wrapping is taking forever...
808_YarisHI · Mar 8, 2009#60
Originally Posted by PETERPOOP ↑
soldering and shrink wrapping is taking forever...
so you'll be finished today peter? 😁
AlexNet0Rockland, ME · Mar 8, 2009#61
I hope so, Im still awake and need something to follow, lol
808_YarisHI · Mar 8, 2009#62
lol peter did you need to use a magnet again?
PETERPOOPThread starterOahu · Mar 8, 2009#63
hah. 808_yaris was a help with his magnet yesterday. Some bolts fell down the engine bay and we used that thing to get them out! Hoping to be done today! Have one more wire to solder!!! Still haven't put the controller anywhere yet. Might just let it hang for now so we can test drive it. Once the wire is done soldering, need to hook up the battery and start her up... I pray for no CELs.
LtNoogieWest Hills, CA · Mar 8, 2009#64
I remember using the magnet too. Also had to lay on the floor and reach around in the lower shroud for tools that I dropped in the engine bay.
KCALB SIRAYVirginia · Mar 8, 2009#65
Originally Posted by PETERPOOP ↑
soldering and shrink wrapping is taking forever...
But it is sooo worth it in the end with a clean factory look and better protection. Can't wait to see it
Originally Posted by LtNoogie ↑
I remember using the magnet too. Also had to lay on the floor and reach around in the lower shroud for tools that I dropped in the engine bay.
huh huh, Long said "reach around" 😲
anonymous userwindward oahu · Mar 8, 2009#66
Originally Posted by PETERPOOP ↑
Can't wait to put this in.

Picture not included in this copy
I put it in every tank. It feels great when you first add it. I think the car adjusts to it though.

So how was the install, and did you have a mechanic help you, or someone just lent you a hand?
PETERPOOPThread starterOahu · Mar 9, 2009#67
IT'S ALIVE!!! No fuel leaks. Everything is running GREAT! No CELS! Just the smell of burnt rubber in the rain!!! MUAHAHAHA! So much torque!!! I love it. Can't wait to run my new exhaust setup and free up more HP in the higher RPMS!

Thanks to noogie and KK for the tips! Noogie's thread was very helpful!

VIDEOS COMING TONIGHT!!!
kounj · Mar 9, 2009#68
congratulations 👍
PETERPOOPThread starterOahu · Mar 9, 2009#69
Originally Posted by anonymous user ↑
I put it in every tank. It feels great when you first add it. I think the car adjusts to it though.

So how was the install, and did you have a mechanic help you, or someone just lent you a hand?
No mechanic. My dad helped me. Definately would not want to do it again. I will probably only be using half a bottle or a third of the boost octane when i fill up!
PETERPOOPThread starterOahu · Mar 9, 2009#70
I ain't no camell, doc, noogie, KK, whoope, etc.. Here's my video of me driving the car seconds after finishing install! Yah baby! It was raining the entire time we were installing it. The roads were wet and provided no traction when I wanted to open it up. I'll still put up the video. Once the weather dries up this week (hopefully), I'll get some 0-60 videos (etc.) without a passenger riding with me!

http://www.youtube.com/watch?v=SFT8SE1kSHM

The tires were spinning the entire time in 1st during the 1st clip of me driving it. I didn't even take it to 6000rpms because it got no traction! MORE VIDEOS TO COME THIS WEEK!
LtNoogieWest Hills, CA · Mar 9, 2009#71
Welcome to the club.🙂

How much clearance do you have between your belt and air conditioner block thingy? It was hard to tell from your video.
PETERPOOPThread starterOahu · Mar 9, 2009#72
Thanks. I got a few inches. I didn't even tie it to the side or whatever. Just yanked it out of the way. I'll get better pics and videos tomorrow! Gotta install the iridium spark plugs still.
yarisugiハワイ · Mar 9, 2009#73
Congrats to you! Another successful shadetree mechanic :) Looks like you're breakin' it in real nice. lol. I hate whiners, but this one I like.
LtNoogieWest Hills, CA · Mar 9, 2009#74
Originally Posted by PETERPOOP ↑
Thanks. I got a few inches. I didn't even tie it to the side or whatever. Just yanked it out of the way. I'll get better pics and videos tomorrow! Gotta install the iridium spark plugs still.
Ok, young man. Your next mission is to tell the rest of us what's that weird noise when we turn on our A/C at idle.

I know you're broke after buying the S/C, but give a good long look at the engine cover thread I've posted.🤤 You'll just have to wait a little longer until you dyno the beast again.
PETERPOOPThread starterOahu · Mar 9, 2009#75
Can you give me a quick description of the kind of noises you guys are hearing with the A/C on at idle. This is with the compressor on or off? I will see if i hear anything.
LtNoogieWest Hills, CA · Mar 9, 2009#76
It's at idle so the S/C compressor clutch is not engaged. It's a low but noticeable rrrrr... rrrrr... rrrrr. Coincides with the A/C compressor engaging and disengaging.

Hard to tell where in the car the sound is coming from.
PETERPOOPThread starterOahu · Mar 9, 2009#77
Oh geez. I will check it out tomorrow. I just want my exhaust setup and my gauges already! Then take it to the dyno!!!!
cali yarisCanoga Park, CA · Mar 9, 2009#78
hell yeah, that's right!! 👏 👏
LtNoogieWest Hills, CA · Mar 9, 2009#79
These installs are starting to become routine. I think the hardest part is sending that PM to Garm saying..."I want to buy a Blitz S/C"... GULP!
ruimondPerth, Australia · Mar 9, 2009#80
Congrats on the install. Lucky people with Boost. Haha. Wish i had a 1NZ-FE, wonder if the kit works on the 2NZ-FE. I should have bought a 1.5 though. Superchargers cost so much. :(
PETERPOOPThread starterOahu · Mar 9, 2009#81
Thanks, you can always go the turbo route (headache!). This hobby IS expensive. I am broke as a joke and still need to spend a grand more to complete the car in it's performance department. Need a new exhaust setup and autometer gauges. Ah! And possibly water/meth injection!? dun dun dun
nisyotaOrlando, USA · Mar 9, 2009#82
00o0o!! that sounds and looks so sexy!!! i wonder if my wife will ever notice that i installed a s/c on the car... hmm. LOL

That is awesome peterpoop.
1NZYaris1New Zealand · Mar 9, 2009#83
Originally Posted by PETERPOOP ↑
Thanks, you can always go the turbo route (headache!). This hobby IS expensive. I am broke as a joke and still need to spend a grand more to complete the car in it's performance department. Need a new exhaust setup and autometer gauges. Ah! And possibly water/meth injection!? dun dun dun
🙄 You also need to put on the 1.8 Throttle body now every one knows how to stop the CEL problems 😆
i would love a S/C but as above NZ$ now at 2.1 - 1 , makes it a $7000.00
up grade +frieght for a $15000.00 NZ Car👎
congrates on a Mod well done.
PETERPOOPThread starterOahu · Mar 9, 2009#84
Yes, the 1.8 tb is now on the future mods list!
kurokoma-kunmy own little world · Mar 9, 2009#85
Originally Posted by PETERPOOP ↑
I ain't no camell, doc, noogie, KK, whoope, etc.. Here's my video of me driving the car seconds after finishing install! Yah baby!
OMG is my car really that loud? No wonder old men frown and brandish their weedeaters at me when I go by 😆 BTW, I made no video just to annoy you Poopy, so I'm pleased to see it had the desired effect 😁 But now I assume you will STFU and let the car do the whining 😉

J/K, congrats PP! I'm so excited for you 👍
YodaFL · Mar 9, 2009#86
AHHHH where have i been! good job dude enjoy the power
Doc ZaiusOttawa, ON, Canada · Mar 9, 2009#87
Congrats on the install! 👍 I totally missed this... a lot can happen on YW when you've been away for the whole weekend. And I'm glad to see that your video fetish will finally be sated.
PETERPOOPThread starterOahu · Mar 9, 2009#88
Originally Posted by Doc Zaius ↑
Congrats on the install! 👍 I totally missed this... a lot can happen on YW when you've been away for the whole weekend. And I'm glad to see that your video fetish will finally be sated.
Haha thanks. Your posts were helpful while reading Noogie's install thread. Yet my video fetish will now be satisfied.

Originally Posted by Yoda ↑
AHHHH where have i been! good job dude enjoy the power
thanks! i will enjoy the power! I will be looking for any fits and civics on the road to let them hear my whine!

Originally Posted by kurokoma-kun ↑
OMG is my car really that loud? No wonder old men frown and brandish their weedeaters at me when I go by 😆 BTW, I made no video just to annoy you Poopy, so I'm pleased to see it had the desired effect 😁 But now I assume you will STFU and let the car do the whining 😉

J/K, congrats PP! I'm so excited for you 👍

Nope! You will still see me asking people for videos! I can't wait to make more!
PETERPOOPThread starterOahu · Mar 9, 2009#89
Originally Posted by camelll ↑
Well I never promised anyone a video as I don't have a camcorder. I did not have threads to refer to when I installed mine and I did mine by myself. My first thought after my install was to make sure the car is running right not pics or videos. It is a little easier when you have everyone's previous experience with troubles and tips to help you along when you need it. If it was not for the other threads you probably would have had a lot more trouble and you probably would not have been making video's seconds after the install. You should be a lot more thankful to the people who did help instead of calling some of them out for not making video's.
With that said welcome to the club.
Thanks Captain Obvious. That's why in the earlier posts of this thread I repeatedly thank KK and Noogie. I also point out that Noogie's thread is very helpful. It's ok though, carry on Debbie Downer.

I'm off to make more videos!!!! videos FTW!
cali yarisCanoga Park, CA · Mar 9, 2009#90
I think the hardest part is sending that PM to Garm saying..."I want to buy a Blitz S/C"... GULP!
LOL - no, it's really easy. The hardest part is me replying that the last one in the USA is gone, and you'll have to wait for the next shipment which I have exclusive rights to. 😁
yaris-meAnaheim, CA · Mar 9, 2009#91
👏Job well done! Your car definitely whines. The S10 might hear it and back off. 👍
whooppee777Maryland · Mar 9, 2009#92
Originally Posted by Doc Zaius ↑
Congrats on the install! 👍 I totally missed this... a lot can happen on YW when you've been away for the whole weekend. And I'm glad to see that your video fetish will finally be sated.
wow i missed this also. i was in baltimore seeing my favorite band play saturday night. and then slept all day sunday cuz i was out all night. congrats.

Originally Posted by PETERPOOP ↑
Well Noogie said that he left off Spacer B that is at the bottom of the blitz alternator bracket. We put it on and eyeballed it and the pulley from blitz did look out of line with the crank pulley. So we are taking off the spacer B and seeing if this works.
i just want to put this out there.

my yaris ate the first belt without spacer B because the alternator was out of alignment without it. i put the spacer on and the alternator sits straight up the way it should and will most likely not eat anymore belts since the spacer is on
whooppee777Maryland · Mar 9, 2009#93
Originally Posted by PETERPOOP ↑
Ah! And possibly water/meth injection!? dun dun dun
lets clear something up.

MYTH: water methanol injection increases horsepower

FACT: water/methanol injection lowers inlet temperature allowing higher boost levels without the risk of detonation/knocking.

one problem. u cant re tune this kit to run higher boost
LtNoogieWest Hills, CA · Mar 9, 2009#94
Originally Posted by whooppee777 ↑
my yaris ate the first belt without spacer B because the alternator was out of alignment without it. i put the spacer on and the alternator sits straight up the way it should and will most likely not eat anymore belts since the spacer is on
The mystery of spacer B will never be understood.🤷
White YarisWarm Orange County · Mar 9, 2009#95
nice nice good job peterpoop! Enjoy the blitz!
PETERPOOPThread starterOahu · Mar 9, 2009#96
Originally Posted by whooppee777 ↑


i just want to put this out there.

my yaris ate the first belt without spacer B because the alternator was out of alignment without it. i put the spacer on and the alternator sits straight up the way it should and will most likely not eat anymore belts since the spacer is on

Yah, i forgot to update that. We ended up using the spacer B. It is aligned perfectly with it. But yah, our kits might all be different. I didn't have to file down the manifold to make it fit. I also was running the belt that came with the kit today and yesterday, but squeeking occurred today and i bought the correct belt. Going to install the NGK iridium spark plugs soon, then take some videos tonight!
PETERPOOPThread starterOahu · Mar 9, 2009#97
Originally Posted by whooppee777 ↑
lets clear something up.

MYTH: water methanol injection increases horsepower

FACT: water/methanol injection lowers inlet temperature allowing higher boost levels without the risk of detonation/knocking.

one problem. u cant re tune this kit to run higher boost

Ah I seeee. I probably wouldn't have gone that route, but that is nice to know. I am just saving up for my new exhaust setup and I'll be a happy man. 👍
JerkrattFair Lawn, NJ · Mar 10, 2009#98
unless u get a diff pulley... which icorrect me if im wrong NST makes or is making or will make :D
blacksandiegovitzJust chillin' out brah ! · Mar 10, 2009#99
Nice Bro ! So was it worth the money/time???
cali yarisCanoga Park, CA · Mar 10, 2009#100
unless u get a diff pulley... which icorrect me if im wrong NST makes or is making or will make :D
No, this is not going to happen. the Blitz kit has a clutch pulley that would be very difficult to reverse engineer. The other alternative is a fixed pulley, but then you very well might have tuning issues.

That leaves a slight overdrive crank pulley as a possibility, but again, possible tuning issues.