Hey garm I am still not understanding why you upgraded the throttle body and intake mainfold to that of the xB?
turbo project continued...
324 posts · 77,012 views · page 5 of 7
Replies continued
The xB is a cable throttle, the Yaris is drive by wire (electronic throttle). To use the AEM standalone management effectively, we needed to change the throttle to cable.
Plus, I really LIKE throttle by cable, super responsive and tunable. 👍
Plus, I really LIKE throttle by cable, super responsive and tunable. 👍
Is the throttle body diameter of the XB equal to that of the yaris? Is there any other differences in between and why the XB is cable throttle and the yaris by wire, is there any purpose?Originally Posted by cali yaris ↑The xB is a cable throttle, the Yaris is drive by wire (electronic throttle). To use the AEM standalone management effectively, we needed to change the throttle to cable.
Plus, I really LIKE throttle by cable, super responsive and tunable. 👍
Here is what I know about cable throttle bodies vs drive by wire systems:
Cable throttle:
-Very responsive and has been used for many decades.
-Connected to the gas peddle by a series of pulleys.
Drive by wire:
-Smooth acceleration.
-There is also noticeable lag when you press on the gas peddle because the computer has to tell the ECU how much the throttle has to open; not as quick as good 'ole cable throttle.
-Take a look at the gas peddle on a Yaris. Notice anything? There is a box to which a peddle sits in, connected to some electronics which lead to the ECU.
-When you drive over some speed bumps and you press on the gas peddle a little bit, the car wouldn't jerk or move violently in the event of sudden acceleration. This is meant for driving comfort.
Cable throttle:
-Very responsive and has been used for many decades.
-Connected to the gas peddle by a series of pulleys.
Drive by wire:
-Smooth acceleration.
-There is also noticeable lag when you press on the gas peddle because the computer has to tell the ECU how much the throttle has to open; not as quick as good 'ole cable throttle.
-Take a look at the gas peddle on a Yaris. Notice anything? There is a box to which a peddle sits in, connected to some electronics which lead to the ECU.
-When you drive over some speed bumps and you press on the gas peddle a little bit, the car wouldn't jerk or move violently in the event of sudden acceleration. This is meant for driving comfort.
THanks for your reply it is something that I didn't consider.Originally Posted by TEHxFALLEN V1.2 ↑Here is what I know about cable throttle bodies vs drive by wire systems:
Cable throttle:
-Very responsive and has been used for many decades.
-Connected to the gas peddle by a series of pulleys.
Drive by wire:
-Smooth acceleration.
-There is also noticeable lag when you press on the gas peddle because the computer has to tell the ECU how much the throttle has to open; not as quick as good 'ole cable throttle.
-Take a look at the gas peddle on a Yaris. Notice anything? There is a box to which a peddle sits in, connected to some electronics which lead to the ECU.
-When you drive over some speed bumps and you press on the gas peddle a little bit, the car wouldn't jerk or move violently in the event of sudden acceleration. This is meant for driving comfort.
So if I consider to upgrade to cable throttle what parts exactly I need and how can I know if the ecu supports this feature?
what ECU do you mean? The stock ECU will not handle DBC
Parmas, are you sure you don't already have a cable throttle? As far as I know the echos/first gen yaris didn't have drive by wire yet...
What is your Walbro's flow rated at?Originally Posted by cali yaris ↑They aren't rated for pressure, they are rated for LPH (liters/hour), and the horsepower they are capable of producing.
This is what I have -- Walbro in-tank 255:
Picture not included in this copy
Nevermind. I just saw...255 lph.
UPDATES 4/6:
The GT28 turbo is installed, replacing the GT25. The AEM a/f gauge is wired.
Just some piping and then modding the AEM box for vvt-i and we are ready to fire it up.
The GT28 turbo is installed, replacing the GT25. The AEM a/f gauge is wired.
Just some piping and then modding the AEM box for vvt-i and we are ready to fire it up.
Excellent, best of luck Garm!
Garm, did you size your fuel pump based on the HP you expected to output or did you just select the largest one they offered of that type?
You already have the throttle by cable!!!Originally Posted by Parmas ↑THanks for your reply it is something that I didn't consider.
So if I consider to upgrade to cable throttle what parts exactly I need and how can I know if the ecu supports this feature?
That is the largest that Walbro makes. IIRC, there are many Bosch pumps that flow enough fuel for much more stupid amounts of power, but they are much wider and will not fit the spot in the stock tank (picture is back a couple pages). Plus their low pressure performance is crap.Originally Posted by LtNoogie ↑Garm, did you size your fuel pump based on the HP you expected to output or did you just select the largest one they offered of that type?
In any case, the Walbro 255lph pump is still capable of flowing TONS of fuel, in fact for over 500 whp. There are other constraints such as the filter, lines, rail, etc that limit it.
^ can't add to that, great answer.
The bill is in the mail. 😉Originally Posted by cali yaris ↑^ can't add to that, great answer.
The Walbro 255 is pretty much the standard pump that everybody uses and capable of supporting lots of power.Originally Posted by LtNoogie ↑Garm, did you size your fuel pump based on the HP you expected to output or did you just select the largest one they offered of that type?
Is good quality and cheap...
There are not that many options in regards to flow capacity....
If you are making anything from 100 hp to 500 hp a Walbro 255 will work for you. You don't really need to match the pumps preassure capacity to your fuel needs. That is the job of the FPR.
You only need to worry to have a pump that will supply enough fuel... and since a Yaris will never push 500hp and walbro is all you ever going to need...
and since a Yaris will never push 500hpc'mon man, just give me more time... 😁
anything new and exciting?
piping is done, just need to mod the AEM for vvti and we're ready to start playing
yes sir but you mite have to change the fuel inlet fitting.
Here's a pic with the piping all done. The new 15 lb Braille battery leaves enough room for the air filter (which used to be down at the bottom of the bay, not good!). Battery tray is gone.
Picture not included in this copy
Picture not included in this copy
tight! 😁
words fail me...
ooh, pretty.
^ the pipes will be when we yank the motor 😉
So... from what I'm seeing here, it looks like I should buy a Braille battery for my turbo kit! I like how that's piped. 😁
ahhh so beautiful... when it's done I might have to take a trip to cali... (from indiana 😲 )
Piping is flawless. I'm so jealous.
Holy hell that looks hot.
thanks guys - I'm jealous of anyone driving their Yaris at this point -- but she will live again soon, I trust...
says the guy driving a monster 443whp tC 🙄 😁Originally Posted by cali yaris ↑thanks guys - I'm jealous of anyone driving their Yaris at this point -- but she will live again soon, I trust...
hoping to have some news today...
good news? bad news?
:)
:)
He is starting the car from what I know.Originally Posted by PETERPOOP ↑good news? bad news?
:)
Congrats Garm on a job well done.
Me too...🤷Originally Posted by cali yaris ↑hoping to have some news today...
looking amazing Garm, well done to you and your mech.
wellll.... dammit, no start today. Everything seems to be wired up correctly, but the coils aren't delivering a spark. One more (hopefully?) hurdle for Art to work through - OFFICIALLY OVER MY HEAD... hehe... 😉
It was actually nice just to sit in my car today, even if I wasn't being much help... 🙂
It was actually nice just to sit in my car today, even if I wasn't being much help... 🙂
awww man i was hoping for a video atleast!
AEM is providing some guidance, maybe changing a few resistors... until next progress report, then....
well I'm sure you got to turn the wheel and make vroom vroom noises, better than nothing 😁Originally Posted by cali yaris ↑wellll.... dammit, no start today. Everything seems to be wired up correctly, but the coils aren't delivering a spark. One more (hopefully?) hurdle for Art to work through - OFFICIALLY OVER MY HEAD... hehe... 😉
It was actually nice just to sit in my car today, even if I wasn't being much help... 🙂
"pshhh pshhh" 😉
😢Originally Posted by cali yaris ↑wellll.... dammit, no start today.
Damned "1"'s and "0"'s........this car is a few key strokes away from slowing down the Earth's rotation!
where did u get that aem oil cap????Originally Posted by cali yaris ↑here's the new motor with the new coils and uncompleted wiring harness.
Picture not included in this copy
AEM? 🙂 Actually I think that one belongs to Art.
Do we have the same thread as a honda, theres more choices for honda oil caps than toyota, but if its the same ill be happy....Originally Posted by cali yaris ↑AEM? 🙂 Actually I think that one belongs to Art.
i got 2 of those sitting around and their discontinued from toyota i believe.Originally Posted by SweetRS ↑where did u get that aem oil cap????
AEM oil caps are made by AEM, not Toyota.
👏 but one on your car is also from scion accessories(xa/xb) that are now defunct. thought you would know that already👎Originally Posted by cali yaris ↑AEM oil caps are made by AEM, not Toyota.