Yarisworld Archive

turbo project continued...

324 posts · 77,012 views · page 3 of 7

Replies continued

CrandallNo Funswick · Mar 11, 2009#101
Nice return line. I've been fortunate enough to work with similar stuff on a build I'm helping a friend with:)

Picture not included in this copy
I didn't do the install of those lines, but you get the picture. He went above and beyond and every line is braided

By the looks if it you made the fuel rail yourself right?
TamagoOff Grid · Mar 11, 2009#102
Originally Posted by Crandall ↑
Nice return line. I've been fortunate enough to work with similar stuff on a build I'm helping a friend with:)

Picture not included in this copy
I didn't do the install of those lines, but you get the picture. He went above and beyond and every line is braided

By the looks if it you made the fuel rail yourself right?
please please let me build your driveshaft!!!!!
ParmasML · Mar 11, 2009#103
What turbo do you intend to put in there Garm?
cali yarisThread starterCanoga Park, CA · Mar 11, 2009#104
I've had a GT2554R in there for 9 months. Been great fun and will serve for initial tuning @ 8-10 psi. When we switch to the built motor, I'm looking at a GT28.

Crandall, that is a Perrin rail.
ParmasML · Mar 11, 2009#105
Originally Posted by cali yaris ↑
I've had a GT2554R in there for 9 months. Been great fun and will serve for initial tuning @ 8-10 psi. When we switch to the built motor, I'm looking at a GT28.

Crandall, that is a Perrin rail.
Well I own the GT28 and it is very tight back there. Infact I am having trouble fitting the air filter especially because of right hand drive setup.

Did you need to increase the diameter of the fuel lines because of the Walbro fuel pump?
TamagoOff Grid · Mar 11, 2009#106
Originally Posted by cali yaris ↑
I've had a GT2554R in there for 9 months. Been great fun and will serve for initial tuning @ 8-10 psi. When we switch to the built motor, I'm looking at a GT28.

Crandall, that is a Perrin rail.
i have a turbonetics T3/T4 brand new for $700 shipped :D
cali yarisThread starterCanoga Park, CA · Mar 11, 2009#107
^ ooh nice, I like those!

Did you need to increase the diameter of the fuel lines because of the Walbro fuel pump?
Not necessary.
PHXDEMONPhoenix, AZ · Mar 11, 2009#108
Nice updates. Keep the pics rolling in
cali yarisThread starterCanoga Park, CA · Mar 13, 2009#109
MARCH 12 UPDATES:

No new pics, but Art tells me the wiring is now 90% complete. YES!

More news Sunday night...
GideonSunnyvale, CA · Mar 13, 2009#110
So we'll soon have word when you'll be selling your old turbo kit you made? 😉
jkuchtaL.A. · Mar 13, 2009#111
This is going to be Bitchin' once it's done bro!
cali yarisThread starterCanoga Park, CA · Mar 14, 2009#112
old turbo kit is in there for now! no changes until we swap motors.
GideonSunnyvale, CA · Mar 14, 2009#113
Awwwww.
Nexus1155Dorchester · Mar 14, 2009#114
I didn't know if anything was done Cali, i was going to call you and see if i can come by to check it out, I was in Perris, CA, but i had no time on my hands :-/
cali yarisThread starterCanoga Park, CA · Mar 14, 2009#115
Next session on the car is tomorrow. Either piping or cable/throttle is next, I would imagine.
CtrlAltDefeatIndianapolis IN · Mar 16, 2009#116
gah I'm so sick of the lack of Yaris love on YouTube... Can you or any one for that matter make some good turbo Yaris race videos I can use as examples?
cali yarisThread starterCanoga Park, CA · Mar 17, 2009#117
I guess Art needed some extra wires.

Here is what's left of the stock engine wiring harness.

Picture not included in this copy
eTiMaGoBangkok, Thailand · Mar 17, 2009#118
yummy rainbow spaghetti!
CtrlAltDefeatIndianapolis IN · Mar 17, 2009#119
Originally Posted by eTiMaGo ↑
yummy rainbow spaghetti!
rainbow spaghetti sounds like some marketing ploy for kids friendly pasta... or a title for a new anime... 😆
PHXDEMONPhoenix, AZ · Mar 17, 2009#120
That looks like a fun mess to play with 😆
cali yarisThread starterCanoga Park, CA · Mar 17, 2009#121
working on the gas pedal on Thursday - last major tech hurdle.
eTiMaGoBangkok, Thailand · Mar 17, 2009#122
I can imagine... gonna retrofit an xA/xB one or go bespoke?
cali yarisThread starterCanoga Park, CA · Mar 17, 2009#123
dunno, we have an xB intake manifold coupled to an xB throttle body. Just need a pedal and cable. ...might try and make the stock pedal work somehow.
PraitaqPlace · Mar 17, 2009#124
This is one of the sickest builds I've seen yet. Just wish I had the $$ to do something similar to mine :p Keep up the work and make us proud!
03Z33SoCal · Mar 17, 2009#125
Picture not included in this copy
cali yarisThread starterCanoga Park, CA · Mar 18, 2009#126
^ uh yeah -- like that -- what is it?
03Z33SoCal · Mar 18, 2009#127
There are many different kinds... you just need to decide if you're running OEM style or race style... also if you want floor mount or top mount styles. You can get individual pedals or the complete gas/brake/clutch assembly.

Check out:

Wilwood
Tilton
Lokar

Jegs & Summit carry many kinds also.
cali yarisThread starterCanoga Park, CA · Mar 18, 2009#128
thanks jeff, I'm sure we'll look into all of those. I would love to go nuts and do a whole set, but for right now, I have to be little careful -- so we'll probably look at doing just the gas pedal.

Decided to go with a GT28:

Garrett GT2860RS GT28RS Disco Potato DBB Turbo Turbocharger 250-360hp+ 0.64 A/R 739548-5

Picture not included in this copy
djgab101australia · Mar 18, 2009#129
Originally Posted by cali yaris ↑
thanks jeff, I'm sure we'll look into all of those. I would love to go nuts and do a whole set, but for right now, I have to be little careful -- so we'll probably look at doing just the gas pedal.

Decided to go with a GT28:

Garrett GT2860RS GT28RS Disco Potato DBB Turbo Turbocharger 250-360hp+ 0.64 A/R 739548-5

Picture not included in this copy
🤤🤤🤤
TamagoOff Grid · Mar 18, 2009#130
can't wait to see how you make it fit!
cali yarisThread starterCanoga Park, CA · Mar 18, 2009#131
^ ha, it's the same housing. It's meant to be an upgrade from the GT25.

Check out Garrett's site to confirm.
CASTREXCosta Rica · Mar 18, 2009#132
Originally Posted by cali yaris ↑
thanks jeff, I'm sure we'll look into all of those. I would love to go nuts and do a whole set, but for right now, I have to be little careful -- so we'll probably look at doing just the gas pedal.

Decided to go with a GT28:

Garrett GT2860RS GT28RS Disco Potato DBB Turbo Turbocharger 250-360hp+ 0.64 A/R 739548-5

Picture not included in this copy
Wise choice! You will probably make more HP per psi with this turbo...
With all your mods you NEEDED this turbo.

Perhaps you will loose a little bit of reaction but with your new top end you won't even remember about it.

You will be burning some rubber... 😈😈😈
CASTREXCosta Rica · Mar 18, 2009#133
Originally Posted by cali yaris ↑
^ ha, it's the same housing. It's meant to be an upgrade from the GT25.

Check out Garrett's site to confirm.
I think it actually is a little bit larger...

By Upgrade, Garrett means that it will bolt right on the same flanges (Manifold and downpipe) but the housings size can be a little larger.

You have to make it fit however...!
cali yarisThread starterCanoga Park, CA · Mar 18, 2009#134
yes we will, and you're right it's the flanges that are matched.

Upgrade turbocharger for GT2554R (471171-3) and GT2560R (466541-1); turbine housing flanges are outline interchangable
Dont' know yet between the .64 and .83 A/R though
turboyarisSouthern New Jersey · Mar 18, 2009#135
yea the t25 and gt28rs are different in size. substainal, when you are talking small turbos... the gt28rs responds well in the 300zx world which is essentially a 1.5 liter since its twin turbo anyways, you should able to do just over 300whp for sure.


and as far as pedals, none are quite as bitchin as these...
http://www.tiltonracing.com/content....list2&id=8&m=b
turboyarisSouthern New Jersey · Mar 18, 2009#136
go .64 .... .83 isn't worth the lag for the little bit of benefit they offer. the turbo is better suited with a .64
cali yarisThread starterCanoga Park, CA · Mar 18, 2009#137
oh holy god those are sweet:


Picture not included in this copy
TamagoOff Grid · Mar 18, 2009#138
if you're doing all that, please get a stack steeringwheel
cali yarisThread starterCanoga Park, CA · Mar 18, 2009#139
whazzat? pictures are good for a newb like me.
TamagoOff Grid · Mar 18, 2009#140
Originally Posted by cali yaris ↑
whazzat? pictures are good for a newb like me.
Picture not included in this copy
CrandallNo Funswick · Mar 19, 2009#141
Originally Posted by cali yaris ↑
oh holy god those are sweet:


Picture not included in this copy
We have a set of Tilton's in the BMW. Great item, great build quality, well worth the money.
cali yarisThread starterCanoga Park, CA · Mar 19, 2009#142
you guys are frigging going to cost me a lot more money... dammit! in a good way... 🙂
eTiMaGoBangkok, Thailand · Mar 19, 2009#143
your car deserves only the very best!
CrandallNo Funswick · Mar 19, 2009#144
Originally Posted by cali yaris ↑
you guys are frigging going to cost me a lot more money... dammit! in a good way... 🙂
😁 Just be thankful you have people around who know what quality parts look like. You might have issues mounting the peddle setup if you're not modifying your interior at all. In all likeliness you'd have to loose a small portion of the botton of the dash, but if that doesn't bother you then DO IT!
rob323Joyner, Brisbane · Mar 19, 2009#145
If the Yaris is anything like the echo in the brake pedal department, it is fairly easy to modify the existing pedal and install a dual master cylinder balance bar setup. And no need for a booster either. But you will have to redo all the brake lines, and I wouldn't even bother if you have ABS.
CASTREXCosta Rica · Mar 19, 2009#146
Did that came out of a fighter jet or something? 😲

Originally Posted by Tamago ↑
Picture not included in this copy
TamagoOff Grid · Mar 19, 2009#147
nope

but i've considered one.

it actually is a good deal if you consider what it does, AND still steers the car ;)
Nexus1155Dorchester · Mar 19, 2009#148
LOL Garm, are you going to be running in a 24 hour circuit and stripping your car down to bare metal when you run that steering wheel?

Data acquisition is nice to have, but ever in an emergency and needed to grab on that area for some reason say goodbye, that is unless you are a go-kart and have full lock to lock steering in half a turn and would never need to turn that much?
cali yarisThread starterCanoga Park, CA · Mar 20, 2009#149
UPDATES MARCH 19:

Had a lot of fun with Art working on the cars today. We took out his turbo mani from the xB so he could repair/weld a crack it developed. Art got more of the IC piping done.

Then I mounted the AEM air/fuel gauge, next to the Autometer gauges I already had. Came with a white face option, nice match. It's actually the same size as the others.

Hole saw FTW:

Picture not included in this copy

Then we removed the gas pedal. The spacing isn't quite the same as the xB (cable pedal), but if I can find an xB pedal with the cable and bracket, we are good to go with a spacer to align the holes.

Picture not included in this copy
yaris-meAnaheim, CA · Mar 21, 2009#150
You put the gauges on the glove box. Smart!😎