Yarisworld Archive

turbo project continued...

324 posts · 77,012 views · page 1 of 7

cali yarisOriginal postCanoga Park, CA · Feb 20, 2009#1
Since my tC is now available to me, the Yaris was committed to the shop for the next few weeks (or so) for the major engine revisions we've been planning, courtesy of Arthur at Horizon Motorsports.

Bye bye stock wiring, and A/C -- guess I'm committed now, eh? 😲

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Replies 323

kounj · Feb 20, 2009#2
nice is that the new motor in there.
cali yarisThread starterCanoga Park, CA · Feb 20, 2009#3
nope, not yet, we may do a 2 step process and get the stock wired up and tuned, work out the bugs, then swap and retune -- OR we'll get really excited and just go for the built motor.

Also new -- Art put a custom Perrin fuel rail on the built motor, so we can have a return line.
1NZYaris1New Zealand · Feb 20, 2009#4
😳 HhhMmmm 🤤
PETERPOOPOahu · Feb 20, 2009#5
Time to show those thailand boys what's up!
TOUGEghostKauai · Feb 20, 2009#6
Cali, if you're not going to use your stock harness, want to sell/donate it to me?
1NZYaris1New Zealand · Feb 20, 2009#7
Originally Posted by TOUGEghost ↑
Cali, if you're not going to use your stock harness, want to sell/donate it to me?
🙄 And can i have your old engine 😁
eTiMaGoBangkok, Thailand · Feb 20, 2009#8
you sure don't waste time 😁 👍
cali yarisThread starterCanoga Park, CA · Feb 20, 2009#9
here's the new motor with the new coils and uncompleted wiring harness.

Picture not included in this copy
m911gtChicago · Feb 20, 2009#10
dibs on your t setup? :)
cali yarisThread starterCanoga Park, CA · Feb 21, 2009#11
Today the carnage continued:

Picture not included in this copy
m911gtChicago · Feb 21, 2009#12
it's both beautiful and hard to look at...but the ends justify the means
cali yarisThread starterCanoga Park, CA · Feb 21, 2009#13
^ EXACTLY, I really can't look at that picture much....

going to be a hot summer without A/C... LOL
m911gtChicago · Feb 21, 2009#14
Originally Posted by cali yaris ↑
^ EXACTLY, I really can't look at that picture much....

going to be a hot summer without A/C... LOL
😆 Well if you need to cool down, look up the current weather in 53818!

But yes, Lisa just got the pleasure of feeling strange when seeing her car "disassembled," it's a weird feeling.
AlexNet0Rockland, ME · Feb 21, 2009#15
holy wiring mess batman
yarisugiハワイ · Feb 21, 2009#16
It looks like you had a car accident. :)
PHXDEMONPhoenix, AZ · Feb 21, 2009#17
Can't wait to see it done. Are you planning on swapping to a different motor or just dropping in a built 1nz ?
ArkhangelPuerto Rico · Feb 21, 2009#18
Off Topic

Cali you have on a hood lift strut? would that setup work on the sedan??
eTiMaGoBangkok, Thailand · Feb 22, 2009#19
Originally Posted by cali yaris ↑
going to be a hot summer without A/C... LOL
Hahahah at least your car isn't completely black!
cali yarisThread starterCanoga Park, CA · Feb 22, 2009#20
phxdemon, the pic of the built 1NZ motor is in post #9 and other threads as well.

we may do a 2 step process and get the stock wired up and tuned, work out the bugs, then swap and retune -- OR we'll get really excited and just go for the built motor.
arkhangel, no idea if that hood strut will fit a sedan - i doubt the angles etc are the same.
m911gtChicago · Feb 22, 2009#21
Originally Posted by eTiMaGo ↑
Hahahah at least your car isn't completely black!
them's fightin' words 😠

😁
whooppee777Maryland · Feb 22, 2009#22
Originally Posted by Arkhangel ↑
Off Topic

Cali you have on a hood lift strut? would that setup work on the sedan??
No.

now back on topic
cali yarisThread starterCanoga Park, CA · Feb 23, 2009#23
^ LOL

today Art cleaned up the rest of the engine bay. Here's a pic showing the motor -- the fuel pressure regulator is just sitting there until he figures a location for it.

Picture not included in this copy
id3379Feb 23, 2009#24
Sweetness, keep up the pics!
PHXDEMONPhoenix, AZ · Feb 23, 2009#25
Pretty 🤤
TamagoOff Grid · Feb 23, 2009#26
why are you doing away with A/C? it's not in the way of anything....
cali yarisThread starterCanoga Park, CA · Feb 23, 2009#27
One less pulley + clean engine bay + weight savings.
With an electric water pump, I'll only have two pulleys on the car.
m911gtChicago · Feb 23, 2009#28
looking clean Garm, keep it up!
TamagoOff Grid · Feb 23, 2009#29
Originally Posted by cali yaris ↑
One less pulley + clean engine bay + weight savings.
With an electric water pump, I'll only have two pulleys on the car.
hmm

so you basically can't complain about no a/c then 🤷
PETERPOOPOahu · Feb 23, 2009#30
that engine is wanting richard's intake manifold, i can feel it!
eTiMaGoBangkok, Thailand · Feb 23, 2009#31
Originally Posted by PETERPOOP ↑
that engine is wanting richard's intake manifold, i can feel it!
+1... all that hot shiny metal, and then poof... weenie plastic manifold.. what a turnoff 😁
cali yarisThread starterCanoga Park, CA · Feb 23, 2009#32
^ yeah, no kidding, but we have some tricks up our sleeves to address that. Holdener isn't the only one capable of making an intake mani for this car.

so you basically can't complain about no a/c then
That is correct.
rob323Joyner, Brisbane · Feb 23, 2009#33
Garm, are you guys ditching the factory intank fuel pump/filter/regulator setup altogether and redoing it in the more conventional way? Or just blocking off the intank regulator and adding a return line?
BLAZINBLUEVITZNEW YORK · Feb 23, 2009#34
Originally Posted by cali yaris ↑
^ yeah, no kidding, but we have some tricks up our sleeves to address that. Holdener isn't the only one capable of making an intake mani for this car.
😳 so we may see a MICROIMAGE intake manifold?
TamagoOff Grid · Feb 23, 2009#35
Originally Posted by BLAZINBLUEVITZ ↑
😳 so we may see a MICROIMAGE intake manifold?
hopefully with a cylindrical collector instead of a rectangular box!!!
aucoriumSouth Africa · Feb 24, 2009#36
what engine swop do you have planned ?
PETERPOOPOahu · Feb 24, 2009#37
Originally Posted by BLAZINBLUEVITZ ↑
😳 so we may see a MICROIMAGE intake manifold?

let's hope so. and may it put down better numbers than richard's, i can dream can't i?
cali yarisThread starterCanoga Park, CA · Feb 26, 2009#38
FEB 26 UPDATES

We spent some time with the car today, sorting out a few issues. Bought aluminum piping to re-plumb the intercooler with 2.5" piping. Re-located the intercooler in the lower grill (yes!). Located a spot for the fuel pressure regulator.

Next challenge is a cable throttle body that works and connecting to the pedal. The one I got off eBay, supposedly for an '04 matrix) doesn't fit the manifold at all.

Removed the fuel pump, bought and installed a Walbro 255, which just fit.

STOCK PUMP (about the size of a D cell battery, LOL)

Picture not included in this copy

NEXT TO A BOSCH -- THAT WILL DEFINITELY NOT FIT

Picture not included in this copy

NEXT TO THE WALBRO 255 WHICH WAS SUBSEQUENTLY INSTALLED

Picture not included in this copy
turboecho2005Ottawa, Ontario · Feb 26, 2009#39
Looking good Garm...

Can't wait to see the final build.

I like a little competition ;)

🤘
TamagoOff Grid · Feb 26, 2009#40
glad u found a pump :) i was thinking walbro when you PM'd me, but just clicked on whatever first came up on froogle.
cali yarisThread starterCanoga Park, CA · Feb 27, 2009#41
more pics from today.

Front of the motor:

Picture not included in this copy

COILS:

Picture not included in this copy

SOMETHING MISSING

Picture not included in this copy

FUEL PRESSURE REGULATOR:

Picture not included in this copy

FUEL PUMP INSTALLED (input for fuel return line in top)

Picture not included in this copy

Picture not included in this copy
kounj · Feb 27, 2009#42
TamagoOff Grid · Feb 27, 2009#43
curious why you didn't do a fuel cell
kounj · Feb 27, 2009#44
you might be able to bolt an older gens manifold with cable throttle.
cali yarisThread starterCanoga Park, CA · Feb 27, 2009#45
curious why you didn't do a fuel cell
This was easy and cheaper
cali yarisThread starterCanoga Park, CA · Feb 27, 2009#46
kou, I need a throttle body that will fit, think I could bolt up a whole 1st gen mani onto it?

I definitely have to convert to cable.
kounj · Feb 27, 2009#47
i dont know if it fit's but the whole manifold a throttle body from an echo or xa could be a good option,they look the same.
TamagoOff Grid · Feb 27, 2009#49
Originally Posted by kou ↑
i dont know if it fit's but the whole manifold a throttle body from an echo or xa could be a good option,they look the same.
you'd do better finding a TB from a 1zzfe (pre DBW) as it's bigger

or a celica GTS pre DBW

xA TB is tiny

but i do have a spare TB and intake manifold, if you're interested garm
cali yarisThread starterCanoga Park, CA · Feb 27, 2009#50
I'll let you know what I find, I need this resolved before next Thursday.

The '04 matrix TB did not fit, bolt pattern was too big.