Replies continued
ParmasML · Feb 27, 2009#51Hey garm well doing with your motor I like the red of your top cover. The pump is the same I will be using in my setup, I had been always told that Walbro is the best choice for fuel pump selection.
The electric water pump seems a good idea. Will add it in when I get stable in cash...
TamagoOff Grid · Feb 27, 2009#52 Originally Posted by
cali yaris ↑ I'll let you know what I find, I need this resolved before next Thursday.
The '04 matrix TB did not fit, bolt pattern was too big.
so make a thin adaptor plate? ;) after all, aren't you building an engine here?
cali yarisThread starterCanoga Park, CA · Feb 27, 2009#53 so make a thin adaptor plate?
I will if I have to. Rather not.
after all, aren't you building an engine here?
I think that's been well established 🙄
TamagoOff Grid · Feb 27, 2009#54 Originally Posted by
cali yaris ↑ I will if I have to. Rather not.
I think that's been well established 🙄
so if you're going to all this hard work to build an engine, 20 mins to drill out an adaptor plate from some aluminum shouldnt' be that big of a deal? 🤷
cali yarisThread starterCanoga Park, CA · Feb 27, 2009#55That's easy to say for someone like you, who can easily make things. I didn't build the motor, mostly I watch and comment. If I have a bolt-on solution, I'll choose it over the extra time to make something.
Your assumption is that it's easy for anyone -- hmmm, seems like that's come up in your posts before? 😉
TamagoOff Grid · Feb 27, 2009#56 Originally Posted by
cali yaris ↑ That's easy to say for someone like you, who can easily make things. I didn't build the motor, mostly I watch and comment. If I have a bolt-on solution, I'll choose it over the extra time to make something.
Your assumption is that it's easy for anyone -- hmmm, seems like that's come up in your posts before? 😉
so tell the guy who's doing the work what i said 😉
TreyzLong Island, NY · Mar 1, 2009#57Man .. I sure am jealous ... I need a new job and more $$$ lol.
TamagoOff Grid · Mar 1, 2009#58 Originally Posted by
Treyz ↑ Man .. I sure am jealous ... I need to sell parts on the internet to kids too....
amen brotha
TreyzLong Island, NY · Mar 1, 2009#59Hahah lol ... I was like wait .. did I say that? I thought I wrote something totally different.
You know the saying though .. you need to have money to make money. I'll get there one day.
Nexus1155Dorchester · Mar 1, 2009#60 You know the saying though .. you need to have money to make money. I'll get there one day.
I see it as you need to have little money to make alot of money, but you need to have the knowledge to do so.
there have been many times where i invested small and made out pretty good
cali yarisThread starterCanoga Park, CA · Mar 1, 2009#61 so tell the guy who's doing the work what i said
I had to read that like 5 times - now I get it!
Sometimes you can make money with other people's money 😉
cali yarisThread starterCanoga Park, CA · Mar 1, 2009#62UPDATES MARCH 1:
Relocated the intercooler where it belongs -- behind the lower grill. Now it will be fully functional:
Picture not included in this copy
Installed a multi-pin jack for the AEM in the firewall:
Picture not included in this copy
And installed the AEM EMS behind the glovebox:
Picture not included in this copy
...next is intercooler piping and throttle body/cable/pedal.....
TreyzLong Island, NY · Mar 1, 2009#63Garm, I thought the AEM was the problem and you were looking for something else in terms of the tuning?
cali yarisThread starterCanoga Park, CA · Mar 1, 2009#64That was the AEM-FIC piggyback. This is the full-blown AEM EMS standalone.
$400 vs. $2000 👍
CrandallNo Funswick · Mar 1, 2009#65The AEM EMS is a great unit with a lot of possibilities. I have quite a few friends around here that use them with great results.
I don't know if it's been brought up in this thread or others but are you going with any improved cooling systems (Coolant or oil). If you have the car in the state it's in it would definitely be the time to do so.
eTiMaGoBangkok, Thailand · Mar 1, 2009#66i am tempted to suggest painting the intercooler flat black for a more sleeper look. but on the other hand as you plan to change the front bumper, you probably will want it to be quite visible 😁
cali yarisThread starterCanoga Park, CA · Mar 1, 2009#67^ yeah, haven't decided about that yet. I've been told it doesn't work as well painted, but I'm not sure.
crandall, oil cooler for sure, and I have sent a stock radiator off to C&R for them to make me a custom one. The new one can be about 6" wider since we've removed that black plastic whatever from the left side, and all the A/C is gone including the condenser.
ArkhangelPuerto Rico · Mar 1, 2009#68 Originally Posted by
cali yaris ↑ ^ yeah, haven't decided about that yet. I've been told it doesn't work as well painted, but I'm not sure.
crandall, oil cooler for sure, and I have sent a stock radiator off to C&R for them to make me a custom one. The new one can be about 6" wider since we've removed that black plastic whatever from the left side, and all the A/C is gone including the condenser.
i would think the paint would act as isolation so the heat wont dissipate well
could it be ionized?
CrandallNo Funswick · Mar 1, 2009#69 Originally Posted by
cali yaris ↑ ^ yeah, haven't decided about that yet. I've been told it doesn't work as well painted, but I'm not sure.
crandall, oil cooler for sure, and I have sent a stock radiator off to C&R for them to make me a custom one. The new one can be about 6" wider since we've removed that black plastic whatever from the left side, and all the A/C is gone including the condenser.
Nice choice on going wider. I know any of the rads for our cars right now are only the half rads and those leave something to be desired.
I wouldn't put any intercooler black especially since you live in a warm climent and would run the risk of heat soaking the intercooler. Which defeats the purpose of the intercooler to begin with. The only real time that you might want to paint it black is if you're running low amounts of boost (5ish PSI).
ArkhangelPuerto Rico · Mar 2, 2009#70 Originally Posted by
Crandall ↑ Nice choice on going wider. I know any of the rads for our cars right now are only the half rads and those leave something to be desired.
I wouldn't put any intercooler black especially since you live in a warm climent and would run the risk of heat soaking the intercooler. Which defeats the purpose of the intercooler to begin with. The only real time that you might want to paint it black is if you're running low amounts of boost (5ish PSI).
Why is this??
TamagoOff Grid · Mar 2, 2009#71 Originally Posted by
Arkhangel ↑ Why is this??
he's feeding misinformation.. ignore it.
SabretoothSt Cloud FL · Mar 2, 2009#72personally i have no experience with boosted applications, but if major auto makers dont use blacked out intercoolers for their evos or srt4s, for looks purposes i would assume its inferior than the silver bare metal versions out there now.
as for running low boost with a black i/c...um last i checked, boost is boost...and it really doesnt matter if your running 5 or 20, but ldoing something that lowers the efficiency of the system is going to effect its total outcome regardless.
in other words if you black out a intercooler for a low boost application. it would be just as bad using it on a high boost application. if not multiplied many times over, due to the increased need for efficiency.
PETERPOOPOahu · Mar 2, 2009#73 Originally Posted by
cali yaris ↑ UPDATES MARCH 1:
Relocated the intercooler where it belongs -- behind the lower grill.
Picture not included in this copy
Love that lower grill. Mass produce that and sell it on microimage. i'm sure many people will buy it!
TamagoOff Grid · Mar 2, 2009#74 Originally Posted by
Sabretooth ↑ personally i have no experience with boosted applications, but if major auto makers dont use blacked out intercoolers for their evos or srt4s, for looks purposes i would assume its inferior than the silver bare metal versions out there now.
as for running low boost with a black i/c...um last i checked, boost is boost...and it really doesnt matter if your running 5 or 20, but ldoing something that lowers the efficiency of the system is going to effect its total outcome regardless.
in other words if you black out a intercooler for a low boost application. it would be just as bad using it on a high boost application. if not multiplied many times over, due to the increased need for efficiency.
using an intercooler in low boost applications is pretty much LOL anyway.
SabretoothSt Cloud FL · Mar 2, 2009#75well where there is a base kit, you always go up from there...personally if I'm going to shell out 3k or more for a kit, I would at least invest another 3 along with it to build the motor to handle more than just 6psi.
TamagoOff Grid · Mar 2, 2009#76 Originally Posted by
Sabretooth ↑ well where there is a base kit, you always go up from there...personally if I'm going to shell out 3k or more for a kit, I would at least invest another 3 along with it to build the motor to handle more than just 6psi.
i've been on 9-10psi for about a year now, no engine problems :D
JerkrattFair Lawn, NJ · Mar 2, 2009#77cali keep it up
CASTREXCosta Rica · Mar 2, 2009#78Lots of OEM intercoolers are black...! Some say a coat of paint might interfer with the heat exchange process. One thing is for sure, IF there is a difference is not significative.
Black Intercoolers = Sleeper look
Bare Aluminum = Hey look I'm turbocharged!
Godspeed has a line of black intercoolers... nice!
This will be a full blown hardcore car. So there is no much point on hiding the cooler.
Also, the car is representing a name "MicroImage" it has to be flashy!!
Looking great!!! 👍
CrandallNo Funswick · Mar 2, 2009#79 Originally Posted by
Tamago ↑ he's feeding misinformation.. ignore it.
Really and how many boosted cars have you worked on? It's not miss information you know how many VW I've strapped to a dyno who don't have intercoolers a lot. Maybe it's a little different up here since we're almost at sea level and have cooler air but it might be a different case in Florida.
TamagoOff Grid · Mar 2, 2009#80 Originally Posted by
CASTREX ↑ Godspeed has a line of black intercoolers... nice!
subaru guys say the black chips off in a matter of weeks.
not nice!
ArkhangelPuerto Rico · Mar 2, 2009#81 Originally Posted by
Tamago ↑ i've been on 9-10psi for about a year now, no engine problems :D
What else have you done to your engine?
TamagoOff Grid · Mar 2, 2009#82 Originally Posted by
Arkhangel ↑ What else have you done to your engine?
changed the oil every 1000 miles
installed an oil cooler with sandwich adaptor and larger "truck" toyota filter
that's it.
SurfinYarisSoCal · Mar 2, 2009#83sweet, keep it up garm! Make yarisworld.com wet their pants.
PHXDEMONPhoenix, AZ · Mar 2, 2009#84 Originally Posted by
PETERPOOP ↑ Love that lower grill. Mass produce that and sell it on microimage. i'm sure many people will buy it!
+1 I would buy it.
White YarisWarm Orange County · Mar 3, 2009#85damn garm, what a beast u got there.
Nexus1155Dorchester · Mar 4, 2009#86 using an intercooler in low boost applications is pretty much LOL anyway.
Ehhhh, I dunno, the charge will still get hotter than normal IAT so when you used one when boosting, it just might have been enough to bring it back down to prevent det from grenading it.
Yeah, you do not want to coat the intercooler in regular paint as it will screw with the air flow not cooling the charge, they do however sell special paint for this application which if i remember is kind of pricey for what it is...
PHXDEMONPhoenix, AZ · Mar 4, 2009#87 Originally Posted by
Nexus1155 ↑ Ehhhh, I dunno, the charge will still get hotter than normal IAT so when you used one when boosting, it just might have been enough to bring it back down to prevent det from grenading it.
Yeah, you do not want to coat the intercooler in regular paint as it will screw with the air flow not cooling the charge, they do however sell special paint for this application which if i remember is kind of pricey for what it is...
I laughed at my dumbass friend when he used krylon to paint his radiator on his computers water cooling setup and then wondered why his processor started running 5 degrees hotter 😆😆😆
PHXDEMONPhoenix, AZ · Mar 4, 2009#88I would imagine it would make an even bigger difference with an intercooler too due to the density difference between water and air 🤷 maybe powdercoating it black would be better?
TamagoOff Grid · Mar 4, 2009#89 Originally Posted by
PHXDEMON ↑ I would imagine it would make an even bigger difference with an intercooler too due to the density difference between water and air 🤷 maybe powdercoating it black would be better?
powdercoating is even thicker than paint..
bad idea.
Nexus1155Dorchester · Mar 4, 2009#90hahah yeah, youre basically melting plastic onto an item, not a good idea.... its just named powdercoat on what's sprayed.
cali yarisThread starterCanoga Park, CA · Mar 10, 2009#91Here's another update and a round of pictures.
Fuel line return:
Picture not included in this copy
Fuel line return, exiting the Perrin fuel rail:
Picture not included in this copy
Other end of fuel rail, pressure regulator:
Picture not included in this copy
xB manifold and throttle body (cable) installed.
New 2.5" piping work begins!
Picture not included in this copy
TamagoOff Grid · Mar 10, 2009#92glad to see you ditched DBW.
if at any point you need an extra intake manifold or throttle body let me know, i have a spare.
did you JBWeld an AN fitting to the top of your tank?
cali yarisThread starterCanoga Park, CA · Mar 10, 2009#93Thanks.
LOL @ JBWeld. It's a bulk head fitting with a nut on the inside - very secure.
TamagoOff Grid · Mar 10, 2009#94 Originally Posted by
cali yaris ↑ Thanks.
LOL @ JBWeld. It's a bulk head fitting with a nut on the inside - very secure.
just checkin ;)
djgab101australia · Mar 10, 2009#95wow i cant wait too see how this turns out........
i want videos and dyno runs when ur done...
cali yarisThread starterCanoga Park, CA · Mar 10, 2009#96 just checkin ;)
Thanks -- please continue to keep it real for me. (not a joke)
Remember, I only know enough to be dangerous, not do all the work. 😉
TamagoOff Grid · Mar 10, 2009#97 Originally Posted by
cali yaris ↑ Thanks -- please continue to keep it real for me. (not a joke)
Remember, I only know enough to be dangerous, not do all the work. 😉
i know how to do both..
i have the scars and hospital bills to prove it :(
so, may we see your manifold? i'm hoping that with all this work you're gonna do something better than a door handle.
i know a couple guys down here that do amazing manifold work if you're interested.
rob323Joyner, Brisbane · Mar 11, 2009#98 Originally Posted by
cali yaris ↑ Remember, I only know enough to be dangerous, not do all the work. 😉
It's about time you got your hands dirty me thinks 😉.
cali yarisThread starterCanoga Park, CA · Mar 11, 2009#99Manifold will come a little later. The xB mani and TB will do for now; Art is making 280 whp with his built motor. Remember, we're doing this first round on the stock motor.
1NZYaris1New Zealand · Mar 11, 2009#100Have you thought about anodizing the intercooler black or red or maybe
even 😲 pink, Na not pink too butch for you 😆 .
keep it up its looking real nice, have you done the electric water pump yet.