So all 3 dots are switch connection points with the brown from the connector connecting to the center post?
DIY - Bypassing Tire Pressure Warning System (TPWS / TPMS)
217 posts · 385,870 views · page 4 of 5
Replies continued
Correct. That was a typo - I meant single pole, dual throw...Originally Posted by birdman ↑So all 3 dots are switch connection points with the brown from the connector connecting to the center post?
How long do the wheel mounted TPMS sensors last before their batteries fail?
The service manual doesn't say. It just mentions that the sensors' "grommets" must be replaced every 10 years.Originally Posted by birdman ↑How long do the wheel mounted TPMS sensors last before their batteries fail?
This guy knows everything. Sheese!
Now I'm going switch hunting at the auto parts store.
I got my switch from radioshack, might be cheaper than auto parts.
Yes, CTScott knows everything - I mean EVERYTHING! So glad he is here and owns a Yaris.
Yes, CTScott knows everything - I mean EVERYTHING! So glad he is here and owns a Yaris.
Imagine the hours CTScott must devote preparing all this material for our benefit.
What's CTScott doing answering these posts? 🤷Originally Posted by birdman ↑Imagine the hours CTScott must devote preparing all this material for our benefit.
He's gotta get back to working on the Yargauge! 😠
j/k
Yes, he is definitely a great asset to this community. 👏
Many thanks for this mod. this will save me serious $ whenI put rims on my '08 LB.
Thanx as well, works great!
One problem I encountered was using the tap-splice connectors I didn't get all the way through the wire insulation the first time. Had to strip a small spot of the insulation from the wires to get a connection. The darn wires are so tiny.
One problem I encountered was using the tap-splice connectors I didn't get all the way through the wire insulation the first time. Had to strip a small spot of the insulation from the wires to get a connection. The darn wires are so tiny.
So just... find the brown wire, cut it, splice the side going OUT from the plug unto the white wire and leave the brown wire going INTO the plug capped?Originally Posted by CTScott ↑*post 115*
I just put a piece of black tape over the light when I changed the rims. Didn't feel like cutting wires.🤷
Correct.Originally Posted by Midnight Drifter ↑So just... find the brown wire, cut it, splice the side going OUT from the plug unto the white wire and leave the brown wire going INTO the plug capped?
Picture lost · img89.imageshack.us
CT Scott, is this this the way it's done in an easy to understand pic?Originally Posted by mario98c ↑Picture lost · img89.imageshack.us
Yes.
mmm I should get this done! too much time playing with sound system!
D.
D.
OK then.Originally Posted by CTScott ↑Yes.
SO, this method does NOT require the the light to be off pre procedure OR that the wheels/sensors to be mounted on or near the car before starting, right? Even if you start out with the light on, it does'nt matter this way.
Is this all true?
Thanks!
That is correct. This mod actually just disables the warning light, which is why the initial state before doing the mod does not matter.Originally Posted by auxmike ↑OK then.
SO, this method does NOT require the the light to be off pre procedure OR that the wheels/sensors to be mounted on or near the car before starting, right? Even if you start out with the light on, it does'nt matter this way.
Is this all true?
Thanks!
The TPWS is completely independent of all other systems on the car. It actually uses legacy ISO-9141 comm, rather than CAN bus, so the ECM doesn't even have the ability to talk to it.
CTScott,
Just wanted to say THANK YOU!
This is the first thing I did when I bought my new Yaris a few months back.
Sure beats taking the inst cluster out and covering the led for the light!
so THANKS AGAIN!
Kevin
Just wanted to say THANK YOU!
This is the first thing I did when I bought my new Yaris a few months back.
Sure beats taking the inst cluster out and covering the led for the light!
so THANKS AGAIN!
Kevin
So the light is the only onboard indicator of TPMS state? Is there a service tool to interface with the TPMS and read/report status? I suppose I'm basically wondering if there's any advantage to tricking the system into seeing a "good" state vs just disabling the warning light.Originally Posted by CTScott ↑That is correct. This mod actually just disables the warning light, which is why the initial state before doing the mod does not matter.
The TPWS is completely independent of all other systems on the car. It actually uses legacy ISO-9141 comm, rather than CAN bus, so the ECM doesn't even have the ability to talk to it.
Also, is there any identifier such as a part number on the TPWS ECU?
I'm really excited to try this!
The TPMS is completely independent of the ECM, but the Toyota Techstream tool can communicate with it via the ODB port. The TPMS is the only system on the Yaris that does not communicate over CAN BUS, but rather just communicates via the older ISO-9141 spec. So, there really isn't any advantage to tricking the system instead.Originally Posted by zelig ↑So the light is the only onboard indicator of TPMS state? Is there a service tool to interface with the TPMS and read/report status? I suppose I'm basically wondering if there's any advantage to tricking the system into seeing a "good" state vs just disabling the warning light.
Also, is there any identifier such as a part number on the TPWS ECU?
I'm really excited to try this!
info
I did this mod by opening up the tmps module, pulling
the pcb, soldering in 3 wires, cutting one, and using a switch
screwed into the face, as in the pics a few posts earlier
----
One note:
you can easily pull the tpms pcb by using a small flat blade screwdriver on the
small plastic tabs on the gray tpms cover....
there is no need for any tools other than that. the tpms cover pops right
off and the pcb slides right out. super easy.
I did this mod by opening up the tmps module, pulling
the pcb, soldering in 3 wires, cutting one, and using a switch
screwed into the face, as in the pics a few posts earlier
----
One note:
you can easily pull the tpms pcb by using a small flat blade screwdriver on the
small plastic tabs on the gray tpms cover....
there is no need for any tools other than that. the tpms cover pops right
off and the pcb slides right out. super easy.
Thank you, Scott! Did the no switch option mod tonight; bye-bye light that irritated me all weekend driving through VA 🤘
Thank you for this DIY.
Thank you Scott!!!
I'm putting winters on this week, just did the mod yesterday. I still can't find my digital camera, but the pics/schematics shown are plenty to get it done.Originally Posted by yarisugi ↑Thanks to them, I was able to make mine with a switch.
Picture lost · i279.photobucket.com
I just did this in about ten minutes. You don't need remove the whole black box, remove the connector plug with the wires in it and then carefully pry the clips up on the cover surrounding the connector and remove it. After that the board slides straight out. I just cut one pin lead and soldered it to the one next to it as pictured above. Lights out now! I've been living with that for over four years......
PS It appears the top of the green PC board is conformal coated to protect against moisture and dust. It looks like it's UR vs. the Humiseal acrylic and it's handbrushed on..
PS It appears the top of the green PC board is conformal coated to protect against moisture and dust. It looks like it's UR vs. the Humiseal acrylic and it's handbrushed on..
Originally Posted by CTScott ↑Here's an even easier method that I figured out one day. I just haven't gotten around to writing up a DIY on it:
So this method replaces the very first post of this entire thread? I'd like the ability to switch back and forth between wheels. Put some different rims/tires and had the TPMS light come on and stay on.
Correct.Originally Posted by CodyTheBody ↑So this method replaces the very first post of this entire thread? I'd like the ability to switch back and forth between wheels. Put some different rims/tires and had the TPMS light come on and stay on.
This thread is all about not having the annoying light on the dash when you don't have wheels with the sensors on your car. They are a needless joke to begin with.
Hey guys. I have a 2009 Scion (toyota) xb. I have had this light annyoying the bejesus out of me for 2 years....in fact since I bought it. I think the dealer didn't bother putting them back in when they installed new tires when I purchased it. Seeing the dealer was 150 miles from where I bought it, I just left the light on. Question is, does anybody know if this fix will work on my car too? Are the wires the same? Is it in the same relative location? I can't find any info on where the box is in my car. Any info is appreciated. Hate to hijack the forum as I don't own a Yaris, but this is great information and looks super easy. Thanks.
Looking at the EPC, the part number for your TPMS ECU is unique to the 07+ XB (89769-12030). I only have the 06 XB service manual, and since the TPMS wasn't added until 07, it's not covered. If you can track down the TPMS section of the service manual or at least the instrument cluster electrical wiring diagram, then I can tell you if this method will work. As far as location goes, the EPC shows a very poor representation of the location, but I think it is showing it as being behind the lower part of the C-pillar cover.Originally Posted by jimmykicker ↑Hey guys. I have a 2009 Scion (toyota) xb. I have had this light annyoying the bejesus out of me for 2 years....in fact since I bought it. I think the dealer didn't bother putting them back in when they installed new tires when I purchased it. Seeing the dealer was 150 miles from where I bought it, I just left the light on. Question is, does anybody know if this fix will work on my car too? Are the wires the same? Is it in the same relative location? I can't find any info on where the box is in my car. Any info is appreciated. Hate to hijack the forum as I don't own a Yaris, but this is great information and looks super easy. Thanks.
I had forgotten about having done this mod, until the light came on last week. Of course, I should have expected it since my winter tires don't have TPMS stems, but it still took me by surprise. Strangely enough, all I could think of when it came on, was of an anthropomorphic Yaris screaming, "I can't feel my tires! AAAAUGH!"
Now I am a bit confused about that. There was no 2007 Scion xb. 2006 models ran late, and they didn't introduce the new style to 2008.Originally Posted by CTScott ↑Looking at the EPC, the part number for your TPMS ECU is unique to the 07+ XB (89769-12030). I only have the 06 XB service manual, and since the TPMS wasn't added until 07, it's not covered. If you can track down the TPMS section of the service manual or at least the instrument cluster electrical wiring diagram, then I can tell you if this method will work. As far as location goes, the EPC shows a very poor representation of the location, but I think it is showing it as being behind the lower part of the C-pillar cover.
Let me see what I can find out about the wiring diagram. Shouldn't be too hard to come up with. I'l probably just buy a service manual. It's the only car I have never bought one for. Thanks.
J
In the EPC I was looking at build date, so the 2007's were really 2008's for the US.Originally Posted by jimmykicker ↑Now I am a bit confused about that. There was no 2007 Scion xb. 2006 models ran late, and they didn't introduce the new style to 2008.
Let me see what I can find out about the wiring diagram. Shouldn't be too hard to come up with. I'l probably just buy a service manual. It's the only car I have never bought one for. Thanks.
J
Ah...gotcha. I will see what I can do. Thanks!
^first post LOL.
The wire colors are different and the TPMS ECU has a different part number, that is unique to the 4Runner, so I would need to see the wiring diagrams for the 4Runner to be able to tell you if the procedure is the same.Originally Posted by carlisle737 ↑Hi Guys, I'm hoping this thread is still alive. I need to bypass the tpms for my 2008 4Runner and my wire colors are really different than what's been described. My hot lead is black with a red stripe. My red (with a yellow stripe) is 12v and I have 2 pinks, one with a black stripe and the other with a yellow stripe. I've attached the photos to see if anyone else has run into this tpms harness where every wire has a stripe of some sort. Any help is deciphering this wire mess will be greatly appreciated.
Thanks.
Picture lost · images2.snapfish.com
Picture lost · images2.snapfish.com
Don't know if 2004 is same as 2008.
Does this help, CTScott?
Does this help, CTScott?
Different - That one has 16 pins whereas the 2008 has 12.Originally Posted by yarisugi ↑Don't know if 2004 is same as 2008.
Does this help, CTScott?
aw crap. oh well. Thought you had the EPC for all the Toyotas. hehe.
After Googling I came across this link.
Some member said it worked on their 2007 4Runner, is 2007 and 2008 different?
@carlisle737 - trade in your 4Runner for a Yaris.
After Googling I came across this link.
Some member said it worked on their 2007 4Runner, is 2007 and 2008 different?
@carlisle737 - trade in your 4Runner for a Yaris.
Originally Posted by yarisugi ↑aw crap. oh well. Thought you had the EPC for all the Toyotas. hehe.
After Googling I came across this link.
Some member said it worked on their 2007 4Runner, is 2007 and 2008 different?
@carlisle737 - trade in your 4Runner for a Yaris.
08 is different, as that 07 diagram still shows a 16 pin connector.
There are a bunch of ebay vendors that sell copies of the Toyota service manuals for about $10.
Thanks, CTScott, for providing the bypass of the TPWS system on my 2008 Yaris. The lights out now. I had damaged my TPMS valve stem so I ordered one off of Ebay with the exact same serial number as my old one but once I had it installed at a local tire place the light remained on. I called the Service Dept for the closest Toyota dealership near me (an hour and half away from where I live) and was informed that the TPMS needed registering with the TPMS ECM which would cost me $90.00. Then I read in this thread that the battery in the TPMS would give out after 7 years or so and would then need to be replaced ($130.00 x 4 + $90.00 equals quite a bit of money). I then decided to try your suggestion in post #115 and it worked...and simple to do as well.
So, thanks again. :).
BTW, I registered here just so I could thank you.
Best regards,
Bob
So, thanks again. :).
BTW, I registered here just so I could thank you.
Best regards,
Bob
I tried this but by accident grounded the red wire now abs light on no powersteering and speedo doesnt work
You popped the 10A ECU-IG fuse, which is in the fuse panel under the bottom of the dash by the hood release.Originally Posted by dave van muyden ↑I tried this but by accident grounded the red wire now abs light on no powersteering and speedo doesnt work
I tried the mod today but with no luck. The warning light is still on after I connected brown to white. Please see the attached pic. My yaris is a 2008 one.
Thank you.
Thank you.

That is because you did not follow the instructions. You connected the wrong side of the brown wire to the white wire. You need to cap off the end that comes out of the connector and instead tap the end that heads up to the cluster to the white.Originally Posted by xiaoya ↑I tried the mod today but with no luck. The warning light is still on after I connected brown to white. Please see the attached pic. My yaris is a 2008 one.
Thank you.
Oops, I got it totally opposite. My wife is driving the car today, will fix it tomorrow.
Thank you very much CTScott
Thank you very much CTScott
