Yarisworld Archive

DIY: TACH INSTALLATION INSTRUCTIONS

216 posts · 192,823 views · page 1 of 5

Leenis24Original postNorthern Vermont · Jun 9, 2006#1
Hey all, i installed a tach today. It was reletively easy. The longest part was finding where to put the wires. I have pics(cell phone, sorry for quality) for the installation process.


Sorry i didnt get the Red tach wire pic, but i just input it into the ACC fuse under the driverside dash. This way when the key is turned on and car started, the tach will also come to life. Its in slot #24 in the fuse box housing and is a 7.5 amp fuse. This will power the tach at 12v. I just put the wire right to the fuse, i choose to do this cause i didn't know where else to put it. Im sure you could hook it up more properly on some wire somewhere nearby.

Hope this all helps.

UPDATE: (6/11/06) Dont hook the illumination wire to the Greenish-blue wire on the dimmer as in the first picture shown, try hooking it to either the stereo illumination or some other dash lighting.
install1.jpginstall2.jpginstall3.jpgTach closeup.jpgTach far-away.jpg

Replies 215

eight_headsLA, USA · Jun 9, 2006#2
looks pretty good except for the dimmer wire... you usually don't want to run anything extra off of the dimmer switch plug because it can burn out the switch...
Leenis24Thread starterNorthern Vermont · Jun 9, 2006#3
Ya but its just the illumination wire, to light the tach. Not like its the red power wire, should be fine.
swngBC · Jun 9, 2006#4
Kind of cute tach!
Supa LaoHarrisburg, PA · Jun 9, 2006#5
Thanks for the how to. I'll be adding one when mine comes in here. I'm debating if I want to put it on the steering column or on the a-pillar like you guys.
eight_headsLA, USA · Jun 10, 2006#6
also, you could probuably hook the illumination wire to the illum wire for the stereo....all it does is makes it come on brighter when your headlight are on...
Leenis24Thread starterNorthern Vermont · Jun 11, 2006#7
Umm ya found a little problem with hooking the illumination wire to the wire that i used on the dimmer. Either the tach light is on fully, or the dash lighting is on fully. I put the dimmer half way so that the dash and tach have half lighting. Im going to fix this liitle problem as soon as it stops raining up her in NE. Other than that it all work fine, i love my new tach.
suzuUS · Jun 16, 2006#8
guys, i know that its great to get help in installing a tach. BUT i must say for some of the experienced stick sh. (manual) drivers, like myself, the tach is not necessary. i drive by hearing the engine and i can tell you it works perfectly OK. i am just curious....how many of you are actually gonna use the tach for the purpose of changing gears.
Supa LaoHarrisburg, PA · Jun 16, 2006#9
I'll be adding one to use for autoX
eight_headsLA, USA · Jun 16, 2006#10
i like to have them because they tell you alot about how the engine is doing if you know what to look for... plus, if you are listening to the radio loud you may not be able to hear or feel the engine as much.... i've never needed one, just like to have one
why?harnett county NC · Jun 16, 2006#11
Yea, its definately not necesary, but I like having it, and if I ever do decide to do some type of racing, it will come in very handy.
ROCKLAND TOYOTAROCKLAND COUNTY NY · Jun 17, 2006#12
sorry to say but i don't like the looks of that tach. way tooo small for me.....
eight_headsLA, USA · Jun 17, 2006#13
Originally Posted by ROCKLAND TOYOTA
sorry to say but i don't like the looks of that tach. way tooo small for me.....
i personally HATE those 5" tachs in anything other than a drag car... maybe it's just me... i personally just ordered a 2" tach for my car
Young-AdolfMinot, North Dakota · Jun 17, 2006#14
Shoulda got a 5" with a 4 inch shift light 😁
Leenis24Thread starterNorthern Vermont · Jun 19, 2006#15
I love having a tach, like eight_heads said, when listening to music i cant hear the engine and stall sometimes or rev out to much. A tach is not necesary for some, but i love having one. I think i look at my tach more than the speedo 😛

Oh and huge 5" tachs are ugly. Way to big, they look like there used on a huge ship or a cargo plane or some other big machinery, to big for a car i think.
spacemanoeuvresBucks County, PA · Jun 20, 2006#16
Originally Posted by Leenis24
when listening to music i cant hear the engine and...rev out to much.
same here, I accidentally laid wheels at a light on the way home from work today

hope to install the tach this weekend. I'll def use your instructions so thanks again 👍
why?harnett county NC · Jun 21, 2006#17
I like mine. I'm too blind to see the smaller tachs, lol. The big one reduces eye strain.
eight_headsLA, USA · Jun 21, 2006#18
well i got my tach in today, just waiting for the universal gauge pod to try out... then i will post some pics
Leenis24Thread starterNorthern Vermont · Jun 26, 2006#19
good luck with the install
spacemanoeuvresBucks County, PA · Jun 26, 2006#20
Installed my $160 nordskog yesterday (thanks again leenis)

Digital readout wasn't as bright as I'd hoped but it still looked cool as hell, and actually worked!!!

...for a while.

After about 10 minutes of driving I noticed the readout going nuts (picture slot machine) between 2600 and 3000 rpms 👎

Figured I'd leave it in for the drive to work the next day, but did the same thing! Worked just fine for like 10 mins. then slot machine 😠
Thank jeebus I didn't drill the mounting holes before testing it out.

So I picked up a cheapy sunpro tach ($45) at pep boys on the way home, and it works fine 😆

Guess you don't always get what you pay for!

Now I have to find someplace to hookup the illumination wire (poop!) and ship the nordskog back to cali

I'll post pics of the sunpro when it's thoroughly tested and mounted.
eight_headsLA, USA · Jun 26, 2006#21
well i've got my tach installed, but not mounted... i had ordered a universal a-pillar pod, and it arrived today smashed to bits, so i'm trying to either get my money back or rma it... anyway, it looks great...i went ahead with the glow shift 2-1/16" gauge like this
there is a color that matched the stock liftback gauge perfectly... will post pics once it's mounted
eight_headsLA, USA · Jun 26, 2006#22
here's a quick picture of what it looks like dark
Picture lost · img481.imageshack.us
sorry for the blur, battery is low... will take a better one soon
eight_headsLA, USA · Jun 26, 2006#23
and one of the speedo just for fun :p
Picture lost · img386.imageshack.us
spacemanoeuvresBucks County, PA · Jun 27, 2006#24
Originally Posted by eight_heads
here's a quick picture of what it looks like dark
Picture lost · img481.imageshack.us
sorry for the blur, battery is low... will take a better one soon
Dag, I'm a stickler for matching parts and I have to say the glow shift gauge looks pretty close to the stock speedo. I'm starting to get interested in this bad'bwoy



But what does it look like during the day? That's one thing I really didn't like about the nordskog; it wasn't very bright with the sun out.

Also, which wire did you use for illumination???

Thanks in advance and good job 👍
eight_headsLA, USA · Jun 27, 2006#25
it's a little hard to see when it's bright out, but i plan on tinting the windows so that should take care of that... and there is no illum wire, there is the tach, ground, 12v constant, and 12v ignition(switched)... the gauge itself is tinted so that it's black when it's off, so when you turn the car on it lights up automatically whether it's night or day so you can see it
KSIbuckyFond du Lac, WI · Jun 30, 2006#26
where would get a tach like this
eight_headsLA, USA · Jun 30, 2006#27
glowshiftdirect.com or ebay... it's the same people and product
spacemanoeuvresBucks County, PA · Jul 1, 2006#28
Pics of the 3 3/4" model installed here:

Link to a thread or page that is not in the archive
KSIbuckyFond du Lac, WI · Sep 10, 2006#29
this needs to become a sticky😈 🍻 🆘 😳 🙇 🤘 👍 🙄
KSIbuckyFond du Lac, WI · Sep 10, 2006#30
how do you remove the dash panel
spkrman2 · Nov 19, 2006#31
thx for posting! I'll definitely be doing this asap :)
spkrman2 · Dec 28, 2006#32
bump because I'm doing this shortly :)
TamagoOff Grid · Dec 28, 2006#33
Heads Up display FTW!!!
Picture lost · i40.photobucket.com
spkrman2 · Dec 28, 2006#34
wow whats goin on there lol
ChinoCharlesOH · Dec 28, 2006#35
What kind of HUD do you have and how is it Tamago?
TamagoOff Grid · Dec 28, 2006#36
Defi Basis
KSIbuckyFond du Lac, WI · Jan 1, 2007#38
i was wondering i have a seven color tach and every time i start the car it goes back to the default color
the problem is i need to connect to the battery i think i was wondering what wire should i tap or whatever
spkrman2 · Jan 2, 2007#39
Originally Posted by KSIbucky ↑
i was wondering i have a seven color tach and every time i start the car it goes back to the default color
the problem is i need to connect to the battery i think i was wondering what wire should i tap or whatever
I tapped the wire from the cd player, thats always an easy/foolproof way to get ignition/illum/power.

I've fixed/created way too many noisy grounds... so I just used the ground location detailed in this DIY, although you could obviously tap ANY location on the body, and the A pillar would have been the shortest path, but doing it this way I didnt have to take it all the way off.

To do the wiring in another yaris would take me about 5 minutes.

For future reference, don't power anything off the illum wire, wire up a relay if you are doing more than, well, powering a relay 🤘
slothman86Savannah, GA · Mar 7, 2007#40
anyone know where the #24 fuse is for red wire is? I've been looking for it all day. Also, so the white wire goes some where else? The green tach wire still goes to the far left green-blue wire that is part of the underdash neon plug? thanks
MrJesterHomo · Mar 7, 2007#41
the #24 fuse is located under the dash on the drivers side. Look all the way up under there adn there should be a small black cover over the fuses. :)
slothman86Savannah, GA · Mar 7, 2007#42
Originally Posted by MrJester ↑
the #24 fuse is located under the dash on the drivers side. Look all the way up under there adn there should be a small black cover over the fuses. :)
yep found it thanks...now for the next question, how'd he get the power wire attached to that fuse?
slothman86Savannah, GA · Mar 7, 2007#44
hey, thats a big help thanks alot!
slothman86Savannah, GA · Mar 7, 2007#45
I found the green tach wire works great with the one prescribed.

I bought a wire tester thing (the pen one) it helped me find the wires I needed. I ended up not putting the illumnination on the same as the power. That ground spot is ingenious tho! :)

I ran every thing from the underdash wiring with the splice clips. On the dimmer switch, I connected illumination to the brown wire. Where the under dash lights are s'posed to plug in, there is a light greenish blue wire that runs the Tach feed (ECU splice your tach control wire to that. The black ground wire from your tach goes to any grounded bolt you want. The Power (red) feed from the tach splices to a green wire on the lower right plug. this in all under the drivers side dash. You basically only have to remove the left kick panel and the storage compartment. Don't forget to test your ground!

Good luck!

PS put your fuses back in the right holes as well!
LafiroNYC · Mar 8, 2007#46
Better pictures, maybe daytime?

I can't see anything clear except your face......
wagoneerWisconsin · Apr 21, 2007#47
I installed my tachometer today.

Glowshift 7 color tach with universal gauge pod.

Installed at A pillar as others.

Wired Red Tach wire to the #24 fuse as described (utilized a mini add a fuse as also described in this thread)

Wired the Black Tach wire to the bolt at bottom of A pillar as described in this thread.

Wired the Green Tach wire to the far left blue green wire at the OBD scan port as described in this thread.

I wired the Yellow "Illumination" tach wire to the brown wire at the dimmer switch.

However, my tach cannot remember which color it was on when I turn it off and back on. It also doesn't brighten/dim with the dimmer switch.

Directions say to "connect the yellow illumination wire to the positive side of the battery". So it needs to be something that is always powered, even when key is off.
Where the heck should I be putting this yellow wire????🤷
uncleyarisToronto · Apr 21, 2007#48
ouch! good luck
wagoneerWisconsin · Apr 22, 2007#49
[QUOTE=spkrman;45391]I tapped the wire from the cd player, thats always an easy/foolproof way to get ignition/illum/power.

QUOTE]

Specifically, where at, what color, and how do you get to this wire? I need to hook my "Illumination wire" to a constant source of 12V so the Tach will remember which color is selected...
wagoneerWisconsin · Apr 23, 2007#50
O.k.

Here is the definitive way to do it for a Glow Shift tach that changes colors.

Buy 2 Mini Add A Cicuit Fuse things described in this thread. There are two sizes, Mini and Regular get the Mini, 2 of them.

Attach the tachometer "12v IGN" (Red wire) to one of the add a fuse circuits. Attach the add a fuse to terminal #24 in the fuse box located where described in this thread.

Attach the tachometer "Illumination" (yellow wire) to the other add a fuse circuit. Install this add a circuit at terminal 8 or 9 (the red 10amp circuit across from #24 location). This will ensure that the tachometer "remembers" what color it was last on after you shut the car off.

Attach the tachometer "signal" (green wire) to the OBD scan port far left blue/green wire as described in this thread.

Attach the tachometer ground (black wire) to the bolt as described in this thread.

Working like a champ and it remembers what color it was last on when I start the car back up.


Picture lost · i168.photobucket.com

Picture lost · i168.photobucket.com