Yep, went back to the auto parts store and borrowed a brand new one to compare it right in the parking lot. It turns out I had a bad tach, so they swapped me for the good one on the spot. Now I'm in business!
DIY: TACH INSTALLATION INSTRUCTIONS
216 posts · 192,823 views · page 4 of 5
Replies continued
Haha, sounds familiar, I had the same problem with my tach, got a new one, worked fine, so I returned the bad one.
Glad you got it workin'. 👍🙂Originally Posted by darkMINI ↑Yep, went back to the auto parts store and borrowed a brand new one to compare it right in the parking lot. It turns out I had a bad tach, so they swapped me for the good one on the spot. Now I'm in business!
Where did you mount your tach? Is is a panel mount or a pedestal mount?
Fmicle, did you mount your tach in the glovebox? I cant see the pics.
Wish some company would come out with a nice A pillar guage pod already lol.
I am not a fan of drilling thru the driver's side compartment like that.
I suppose even using guage pedastals and drilling them into the A pillar would work (garm had a pic and he did this with his tc IIRC).
I am not a fan of drilling thru the driver's side compartment like that.
I suppose even using guage pedastals and drilling them into the A pillar would work (garm had a pic and he did this with his tc IIRC).
i really need to do this. i have the same tach but in white. mine is just sitting where that johnson and johnson thing is sitting in the side cluster. haha
OK, try to click on the links directly...Originally Posted by CueBall ↑Fmicle, did you mount your tach in the glovebox? I cant see the pics.
http://public.blu.livefilestore.com/...720.jpg?psid=1
http://public.blu.livefilestore.com/...723.jpg?psid=1
http://public.blu.livefilestore.com/...724.jpg?psid=1
Granted, you can drive a car without a tach.Originally Posted by suzu ↑guys, i know that its great to get help in installing a tach. BUT i must say for some of the experienced stick sh. (manual) drivers, like myself, the tach is not necessary. i drive by hearing the engine and i can tell you it works perfectly OK. i am just curious....how many of you are actually gonna use the tach for the purpose of changing gears.
However, have you ever seen a race or performance car without one or ever heard of a race driver etc who does not insist on one?
Besides if you got your sys turned up, you can't hear the engine that well can you.😉
Anyway, one really does not use a tach for changing gears as a matter of routine. A tach is simply just one more way of monitoring an engine
BTW I have been driving a manual for the last 45 years! 🙂
Wow, that would make you at least 61 years old! 🙇Originally Posted by RedRide ↑BTW I have been driving a manual for the last 45 years! 🙂
Actually, I am 63 years old! 😁Originally Posted by fmicle ↑Wow, that would make you at least 61 years old! 🙇
Just abouit every car I ever owned was a manual because I enjoy going through the gears and driving in general.
BTW, my very first car was a '57 Chevy and my second one was a "55 Chevy. Back then, they were not yet considered classics. They were just cheap older cars 🙂
Tach dreamer update: I've finished the 33 LED analog display installed in the display trim similar to my earlier BS2 tach. Those of you from the LA basin may have seen the only operational prototype of the gen 1 tach. I've finished the firmware (with the help of Prallax.com forum members) on a breadboard for a digital readout. It's running in my Yaris today. I'm changing the 4x7 segment display from red to green. I had a setback learning to solder surface mount chips for the analog display.
I'll have to do a version 1.1 layout before it's kit ready. I love the headrest video camera mount I found here. When success is apparent watch for the video coming soon to a forum near you.
I'll have to do a version 1.1 layout before it's kit ready. I love the headrest video camera mount I found here. When success is apparent watch for the video coming soon to a forum near you.
A question for this installation....
Could you also tap the tach and illumination wires that plug into the main speedo panel? There is a tach signal even for cars without a tach display. I know becuase I plugged a canadian panel into an american liftback and the tach worked fine.
cheers
Could you also tap the tach and illumination wires that plug into the main speedo panel? There is a tach signal even for cars without a tach display. I know becuase I plugged a canadian panel into an american liftback and the tach worked fine.
cheers
i would like to put the instrument cluster w/ tach, in a us spec, 2007 hatch back.
will the cluster physically fit, and how much of the wiring to the cluster would
have to be re done? has any body tried this before? thanks for any help in this
area. bob smith, ohio
will the cluster physically fit, and how much of the wiring to the cluster would
have to be re done? has any body tried this before? thanks for any help in this
area. bob smith, ohio
It is plug and play, as long as you purchase one from a comparably equipped car (i.e. if you have ABS it has ABS, if you don't it shouldn't). There are many threads on here about people having done so, or desperately searching for one to do so. The hardest part is finding one, since so few Yaris in the US have had them.Originally Posted by jrsyaris ↑i would like to put the instrument cluster w/ tach, in a us spec, 2007 hatch back.
will the cluster physically fit, and how much of the wiring to the cluster would
have to be re done? has any body tried this before? thanks for any help in this
area. bob smith, ohio
hey guys! i just installed my tachometer yesterday!
special thanks to mr. CTSCOTT for the wiring suggestions!
will post pic soon. orayt!
next stop, suspensions! :))
special thanks to mr. CTSCOTT for the wiring suggestions!
will post pic soon. orayt!
next stop, suspensions! :))
Tach is important to me. Hearing aids, and excess road noise make it impossible to hear the little hum of the engine.
Just installed my tach and wanted to compare RPM's to make sure it is accurate.
2008 3dr, 5 sp manual.
Turning 3000 at 70 mph.
2500 at about 60.
2008 3dr, 5 sp manual.
Turning 3000 at 70 mph.
2500 at about 60.
That sounds right
Mine reads about 2800 @ 65mph in 5th
Yours is callibrated/configured properly for a 4 cylinder.
Mine reads about 2800 @ 65mph in 5th
Yours is callibrated/configured properly for a 4 cylinder.
Brainr4
There isn't much diff between the Auto and 5 speed, (I imagine thats why the epa guesses we'll get nearly the same) I'm running about the same "R's" with my auto...a drop to 3rd puts me at 4300+/- @ 70.
There isn't much diff between the Auto and 5 speed, (I imagine thats why the epa guesses we'll get nearly the same) I'm running about the same "R's" with my auto...a drop to 3rd puts me at 4300+/- @ 70.
Thanks!
I didn't think I would be turning so much at 70mph.
If we had a 6 speed gas mileage would be close to the Prius.
Ha, I guess that is why they would never put a 6sp in the Yaris!
I didn't think I would be turning so much at 70mph.
If we had a 6 speed gas mileage would be close to the Prius.
Ha, I guess that is why they would never put a 6sp in the Yaris!
Just installed my tach, 3 3/4" Glowshift Elite 10 Colour. Behind the steering wheel with full access to the glovebox behind it c:
Picture lost · a6.sphotos.ak.fbcdn.net
[Taken with Nikon D3000 w/ 10.5mm Fisheye]
Picture lost · a6.sphotos.ak.fbcdn.net
[Taken with Nikon D3000 w/ 10.5mm Fisheye]
Followed this DIY, works fine. You can actually use any of the "top" row of the OBDII connector for ground.
why would you though when there's a body ground right there
Right where?
There's ground right by your left foot. read the diy. why would you want to ground to a obd2 rather than a factory ground point
Yeah, behind the left kick panel (by your left foot) is where I grounded mine.Originally Posted by KSIbucky ↑There's ground right by your left foot. read the diy. why would you want to ground to a obd2 rather than a factory ground point
I did that out habit more or less as most all Toyotas have factory ground pont there.
However, the OBD2 is closser so why not use it?
The factory ground is better. Why tap into a wire thats a foot away from a ground point? The factory ground is exactly that a ground its not a obdii point it has a purpose use it.
Not really, If something has a positive ground and can more than handel the current load imposed on it, that is all that is required or ever neededOriginally Posted by KSIbucky ↑The factory ground is better. Why tap into a wire thats a foot away from a ground point? The factory ground is exactly that a ground its not a obdii point it has a purpose use it.
A tach is a very low current draw item and the OBD2 ground is more than adequate.
Don't loose site of the fact that if you are getting the tach signal frome the OBD2 to begin with, it will also be good for the ground. All modern tachs use LED/low current lighting.
Otherwise, it would be like runninng a perfectly adequate 24ga wire for an item's positve and then, runing an 8ga wire for the ground for example. There would be simply no need for a 8ga ground.
I installed my tach today. The light works, but the tach doesn't. 😠
I know I have power and ground because I can test those with my test-lite.
Is there any way to test the tach signal circut?
I am useing the tan wire furthest to the left on the OBD connector, as shown in this thread.
I get no lite with a test light on that wire, but my volt meter reads about 6.8v.
I know I have power and ground because I can test those with my test-lite.
Is there any way to test the tach signal circut?
I am useing the tan wire furthest to the left on the OBD connector, as shown in this thread.
I get no lite with a test light on that wire, but my volt meter reads about 6.8v.
Never use a test light on a "signal". Test lights draw current and connecting one to an ECM signal could potentially damage the ECM.
That being said, it is hard without an oscilloscope to verify a pulsed signal.
That being said, it is hard without an oscilloscope to verify a pulsed signal.
Well, the tach signal needs a solid ground in order to work. That being said, are you sure you don't have your positive and negative wires flipped? Also, HOW did you tap into the tach signal wire? Did you use a BLUE t-tap or scotch lock?Originally Posted by CueBall ↑I installed my tach today. The light works, but the tach doesn't. 😠
I know I have power and ground because I can test those with my test-lite.
Is there any way to test the tach signal circut?
I am useing the tan wire furthest to the left on the OBD connector, as shown in this thread.
I get no lite with a test light on that wire, but my volt meter reads about 6.8v.
I hope I didn't hurt the ECM. 🙁 It seems to be running ok so far.
Turns out I had a bad tach. Wireing was fine. Works good now with new tach.
I actually put a pin in the port (for tach signal). I hate to splice into wires if I can avoid it. Thanks for the replies.
Turns out I had a bad tach. Wireing was fine. Works good now with new tach.
I actually put a pin in the port (for tach signal). I hate to splice into wires if I can avoid it. Thanks for the replies.
Is there some other place i can get tach signal from???
Yes, on the cluster connector or ECM connector. All three locations are tied to the same signal.Originally Posted by isra ↑Is there some other place i can get tach signal from???
Why do you want some where else?
Ok I think it's time those with a 2012 yaris without a tach start posting their installs.
I cant believe my 5 speed manual doesn't come with a tach. I'm looking for a good spot to mount a tach which is close to the connections needed. Air bags in the a-pillar make me nervous.
Who's first? 😉
I cant believe my 5 speed manual doesn't come with a tach. I'm looking for a good spot to mount a tach which is close to the connections needed. Air bags in the a-pillar make me nervous.
Who's first? 😉
For the 2012, the Tach signal is still on pin 9 (light green wire for 2012) of the OBD connector.Originally Posted by Strider199 ↑Ok I think it's time those with a 2012 yaris without a tach start posting their installs.
I cant believe my 5 speed manual doesn't come with a tach. I'm looking for a good spot to mount a tach which is close to the connections needed. Air bags in the a-pillar make me nervous.
Who's first? 😉
The pink wire on the key switch is still ignition switched power for the 2012.
Thanks for the info CTScott.
I went out today to a few stores looking for a tach I like. Did not find one. I bought a new horn which I will install when it warms up this weekend but I'm still looking for a decent tach. Auto Zone and Canadian Tire just don't have the selection. On-line they have a ton of gauges but I hate the extra duty I have to pay being in Canada. Any stores around the Hamilton - GTA area which have a decent selection?
I went out today to a few stores looking for a tach I like. Did not find one. I bought a new horn which I will install when it warms up this weekend but I'm still looking for a decent tach. Auto Zone and Canadian Tire just don't have the selection. On-line they have a ton of gauges but I hate the extra duty I have to pay being in Canada. Any stores around the Hamilton - GTA area which have a decent selection?
What about a Toyota tach from the SE model? I'm considering buying a Yaris LE automatic, but I want a tach, too. So, would an SE replacement tach be an easy installation? And fit right in the dash where there's a big, round space for one? Thanks in advance for your opinions.
Ken S.
Ken S.
Originally Posted by avlisk ↑What about a Toyota tach from the SE model? I'm considering buying a Yaris LE automatic, but I want a tach, too. So, would an SE replacement tach be an easy installation? And fit right in the dash where there's a big, round space for one? Thanks in advance for your opinions.
Ken S.
Yes it will work, but finding one will be very difficult until the 2012 has been out long enough for some to make it to junkyards. Per your other thread about buying one from the dealer; You may have a hard time getting the dealer to order a cluster for you, as they often will not let you order a cluster that doesn't match your VIN configuration. If you are buying a 2012, you can try to make your sale dependent on them ordering the cluster (just make sure you get it in writing on the contract).
On the '09, it the light brown wire for the tach signal.
The brown wire is in the exact same position as the blue wire.
It had me stumped for short while when installing my tack as I also have an '09.
The brown wire is in the exact same position as the blue wire.
It had me stumped for short while when installing my tack as I also have an '09.
hey im having problems with the greenish blue wire for the rpm read outs. do i stick the wire in the same slot as the greenish blue one? or do i splice the green and the greenish wire together?
Always make a good connection with wiring. Either use a tap splice connecter (that crimps onto the two wires cutting through the insulation to make contact with both wires) or solder and heat shrink the connections.Originally Posted by ijose 845 ↑hey im having problems with the greenish blue wire for the rpm read outs. do i stick the wire in the same slot as the greenish blue one? or do i splice the green and the greenish wire together?
oh okay i got it thanks! and as for the light wire is it okay if i put it on the ingition fuse?? it works pretty well for me now! will it hurt anything?
That's fine if you do it with an add-a-fuse or tap the pink ignition wire on the ignition switch connector. Shoving the fuse in with the wire under it is not a good way to do things.Originally Posted by ijose 845 ↑oh okay i got it thanks! and as for the light wire is it okay if i put it on the ingition fuse?? it works pretty well for me now! will it hurt anything?
ahh thats what i did....but its in their really snugg. im just afriad to cut any of the factory wires cause i dont want to cut too much or mess up and ruin the car completely :/Originally Posted by CTScott ↑That's fine if you do it with an add-a-fuse or tap the pink ignition wire on the ignition switch connector. Shoving the fuse in with the wire under it is not a good way to do things.
2004 Echo RS H/B: Installed an Equus Tach from Canadian Tire, picked up power via add fuse (7.5a)at the "ACC" fuse, and also spliced it for he display power. The tach wire on this card on the OBD2 plug was black with a silver band.

Sharrrp!
I Spliced the green wire into an orange wire that is on the far bottom left on the ecu port. I've read online that that was where I'm supposed to do it since I have tire pressure monitor. The orange wire is in replace of the greenish blue wire your talking about in cars with tire pressure monitor. It has been driving me crazy that it wont read rpms. Lights work and it has power, also I put my ground exactly where you have yours. Any Ideas?
Thx
09 Yaris3drhatch
Thx
09 Yaris3drhatch
The orange wire is the correct one for your car. Double check your splice, particularly if you used a tap splice, as that wire is only about 24 AWG, so the tap splice needs to be a tiny one to make a proper connection.Originally Posted by YarisAddict ↑I Spliced the green wire into an orange wire that is on the far bottom left on the ecu port. I've read online that that was where I'm supposed to do it since I have tire pressure monitor. The orange wire is in replace of the greenish blue wire your talking about in cars with tire pressure monitor. It has been driving me crazy that it wont read rpms. Lights work and it has power, also I put my ground exactly where you have yours. Any Ideas?
Thx
09 Yaris3drhatch