I used warm soapy water to get the rest of the debri off
DIY: Debadge/Black out Emblems
112 posts · 107,602 views · page 3 of 3
Replies continued
Red Raider: I'd think you may be able to buff it out. Looks minimal. Might have to wetsand but I doubt it.
Been thinking of doing this mod. But im partial to the yaris emblem. Might just take the toyota off.
Turn the Yaris emblem into a bling chain.
^😆
Anyone know where I can get the 3m body tape? I wanna do this this weekend but can't find it...
You should be able to find it at your local Wal-Mart. Thats where i found mine.Originally Posted by beebosaur ↑Anyone know where I can get the 3m body tape? I wanna do this this weekend but can't find it...
thought I might toss in some info
I work at a body shop, and have to do this kind of work all the time.
If you are going with simple satin/flat black, just use trim paint.
it's designed for this exact application, requires only 600 grit sanding (or a scotch brite) clean with alcohol based solution and spray. No adhesion promoter, no primer or clear. Has full UV protection and holds up much better then your run of the mill plastic paint.
http://www.outdoorpros.com/Prod/Kryl...fhu=3733323832
Works great on rims too!
To remove emblems fishing line works the best
to remove the leftover tape a eraser disc works amazing, if that's out of the budget just roll it off with your finger and use some adhesive remover. Goo gone does effect clear, maybe not enough to notice, but it does effect it.
Hope this helps some!
I work at a body shop, and have to do this kind of work all the time.
If you are going with simple satin/flat black, just use trim paint.
it's designed for this exact application, requires only 600 grit sanding (or a scotch brite) clean with alcohol based solution and spray. No adhesion promoter, no primer or clear. Has full UV protection and holds up much better then your run of the mill plastic paint.
http://www.outdoorpros.com/Prod/Kryl...fhu=3733323832
Works great on rims too!
To remove emblems fishing line works the best
to remove the leftover tape a eraser disc works amazing, if that's out of the budget just roll it off with your finger and use some adhesive remover. Goo gone does effect clear, maybe not enough to notice, but it does effect it.
Hope this helps some!
sorry if I am not reading the whole thread however, do we have any pics on how to remove the front and back toyota logo in the middle? I have a yaris sedan and I would like to know on how to remove them as I am planning on painting them black!
Thanks!
Thanks!
i want part number front emblem.for yaris rs thailand.
I too can't get the front emblem off on my 2010 3 door hatchback. I tried Shinare's suggestion but my grill must be slighly different as I can't get near the two pins as he decribed. Any other thoughts how to remove front emblem?
The easiest way is to remove the plastic clips along the top of the bumper (shown in the first post of this thread) and then also remove the one on the inside of the front fender well on either side. Once those are off, separate the bumper from the fender slightly and you will see the retaining clips. Carefully release them with a small flat blade screwdriver. Once those corners are free you can pull the top out and have plenty of room to get your hands at the emblem. It is also a great time to add a fog light kit or more potent horn.Originally Posted by Blue Beast ↑I too can't get the front emblem off on my 2010 3 door hatchback. I tried Shinare's suggestion but my grill must be slighly different as I can't get near the two pins as he decribed. Any other thoughts how to remove front emblem?