Replies continued
TinyGiantThread starterRochester, NH · Apr 18, 2009#51looks good!
i'm on a mission to sell my rims and go with black ones asap.
probably paint my calipers blue too
go with straight blue/black theme :)
TinyGiantThread starterRochester, NH · Apr 18, 2009#52the only chrome left on my car is in the key holes.. which i want gone lol..
but i'd how to remedy that .. paint would scratch non stop .. so i have to live with it
YarisPRMayaWest, Puerto Rico · Apr 18, 2009#53 Originally Posted by
TinyGiant ↑ the only chrome left on my car is in the key holes.. which i want gone lol..
but i'd how to remedy that .. paint would scratch non stop .. so i have to live with it
I'm problably selling my TRD 18's and getting some 15" black rims. I've been using steelies on the front a few days and woooaahhhhhh the difference is Huge
nerpRockville, RI · Apr 18, 2009#54I'm going to debadge my 3-week-old Yaris pretty soon. I like the smooth bottom. :)
TinyGiantThread starterRochester, NH · Apr 18, 2009#55there will be 2 holes in the back where the big emblem was if you totally debadge
Quick question: For rebadging, has anyone used "
3M Plastic Emblem & Trim Adhesive", instead of the "3M Body Molding Tape" that seems to be used pretty often?
Thanks.
A+
bibi-indonesia · Jul 20, 2009#58yes . i did the same way . but,unluckily,my car got scratch from that .
because i was careless during shaving the emblem :D
zestiaHershey,PA · Sep 9, 2009#59I used a hair dryer to warm them up and then used fishing line to remove. It took a little while to get the excess glue off of the car, but now it looks great.
DrBGreece · Oct 21, 2009#60hey guys
greetings from the other side of the pond
i recently debadged my yaris but now i changed my mind and want to put the badges back.
the thing is though that i dont know their exact position.
do you know where can i find it?
the guys in the dealership are ridiculous enough to admit that they dont know the exact position of the badges; they will just put them "where it looks ok"...
so, i dont want to starting wandering in the streets in search of another yaris, just to measure it, and having people thinking i m a weirdo, thief etc...
HTM Yarissouth Carolina · Nov 30, 2009#61I would like to add a couple of steps to the painting process .
1. Add a few coats of clear to the newly painted badges .
2. After letting the paint dry/cure for a few days , apply a couple of coats of wax .
hexengonbby · May 6, 2010#62the instructions are unclear as to how to remove the front emblem , i try sticking my fingers under the grill for the tabs but im not sure what i am looking for as I dont find or feel anything.. can I just use a screwdriver and pry it out by force , if so, am i able to put it back on afterwards
can someone give me clear instructions on how to remove the front emblem, thanks
RedHatch08Detroit MI USA · Jun 11, 2010#63Whoo! My first post at YarisWorld...
Anyways, I just did this mod the other day. Pretty easy and essentially free if you already have fishing line, WD-40, and ... the sun.
Looks much cleaner without the badges. Plus it will confuse people even more now. Here in Michigan, lots of people don't know what to make of this car. If it doesn't have a GM/FORD/CHRYSLER badge on it, they think it's a spaceship or something.
I've had multiple people approach me in parking lots and ask me what it is. Even with the badges still on it.
In any case, I think it's time well spent to do this. I just used the "sun method" (no hair dryer or heat gun), so the hardest part was getting the foam/tape stuff off because it wasn't super hot that day.
I just used Goo Gone to help loosen the adhesive. Took a while to get it all off using just my finger nails, but it was worth it.
TinyGiantThread starterRochester, NH · Jun 11, 2010#64looks great.
its amazing what a difference it makes :)
CtrlAltDefeatIndianapolis IN · Jun 11, 2010#65debadging was the first mod i did.. looks a lot cleaner
RedHatch08Detroit MI USA · Jun 12, 2010#66It was actually my second mod.
First thing I did was get a K&N filter since the paper one that came with the car needed replacing anyways (since I got my Yaris used).
suprajoeyLos Angeles · Jun 18, 2010#67O' Nice, that little red Yaris looks Sexy..!!
-Also Quick question? Did you remove the rear badge to paint it? Or did you mask taped it, and papper it all around to paint it??
-Also how do i remove it to paint it off the car not on it??
Thanks
TinyGiantThread starterRochester, NH · Jun 18, 2010#68lol .. read the first post. dont be lazy :)
suprajoeyLos Angeles · Jun 20, 2010#69 Originally Posted by
TinyGiant ↑ lol .. read the first post. dont be lazy :)
Hahaha, i read the damm post three time, before i went out side to remove the front and paint it black, but the rear, you say it will leave two holes? so does this mean that the badge is held together by 2 small clips? or is it held together by 2 clips (+) Plus 3M tape?? Dammit, im just thinking of masking everything around it, and sanding/paint the badge on the car, just dont want to mess up my OEM Paint.😲
Thanks on the Awsome Thread👍👍
BTW: Heres mine.
-Not to worry, my little truck is getting lowered this Upcoming week as well..!!

TinyGiantThread starterRochester, NH · Jun 20, 2010#70the two holes are actually just so the badge is straight. they dont clip in or anything. and its only on the center emblem.
the emblem has two little nubs that fit in the holes. its just for alignment. you wont have to fill anything in or do anything crazy .. just pop it off. you'll see what i mean.
suprajoeyLos Angeles · Jun 20, 2010#71 Originally Posted by
TinyGiant ↑ the two holes are actually just so the badge is straight. they dont clip in or anything. and its only on the center emblem.
the emblem has two little nubs that fit in the holes. its just for alignment. you wont have to fill anything in or do anything crazy .. just pop it off. you'll see what i mean.
LOL, not to sound dumb, but does it also have the sticky 3M tape on it, just like the Yaris, and Toyota Badge? so i would also have to use the heat gun to remove just like the other badges, right??😕
-Thanks so much for your responce, and patience.
TinyGiantThread starterRochester, NH · Jun 20, 2010#72Yeah same deal :)
suprajoeyLos Angeles · Jun 20, 2010#73Sweet, thanks so much on the great Thread...!!
rye7jenSaudi Arabia · Jun 21, 2010#74 Originally Posted by
KRAZGRL ↑ I just took some pliers and pulled the badges off. Whatever tape was left I was able to pick off and used goo-gone for the stubborn parts. Really easy.
Hi there! I have this Goo-gone also, but how did you applied it? I've read the directions but maybe you can share how did you apply this goo-gone thing. TIA 👍
RedHatch08Detroit MI USA · Jun 22, 2010#75 Originally Posted by
rye7jen ↑ Hi there! I have this Goo-gone also, but how did you applied it? I've read the directions but maybe you can share how did you apply this goo-gone thing. TIA 👍
It's quite easy. Here's what I did:
Just get your Goo Gone and some paper towel. Take 1 sheet and fold it up a few times to make a small square.
Apply some Goo Gone to the paper towel. Wipe it generously across the foam/tape that's left on the car. Coat it well and let it sink in for a minute or two.
Pick an edge to start from, and just use your fingers to start peeling the foam off.
Feel free to re-apply the Goo Gone periodically as you go. It does work better if you give it time to sink in and loosen the adhesive.
Also you may want to do this step at a
car wash, like I did.
If you're anything like me, your car will end up with WD-40 and Goo Gone all over the place. After I was done I just gave it a car wash, and it was all nice and clean and debadged.
cali yarisCanoga Park, CA · Jun 22, 2010#76^1 good instructions, although I use a cloth and not a paper towel.
Using plenty of product is the best advice!
TinyGiantThread starterRochester, NH · Jun 22, 2010#77added it to the original post
MichaelLCChicagoland · Jul 12, 2010#78Can/should you de-badge an older model?
Looking at getting an '07 and would like to remove the back letters, but think it might be too "baked in" to the paint?
TylermayerSnohomish, WA · Jul 12, 2010#79 Originally Posted by
MichaelLC ↑ Can/should you de-badge an older model?
Looking at getting an '07 and would like to remove the back letters, but think it might be too "baked in" to the paint?
i have an 07 i took mine off and you can tell the difference but once you wax it really good it will look fine!🙂
MichaelLCChicagoland · Jul 12, 2010#80Tylermayer, thanks.
Still have to get one, but I'll give it a try. Waxing will make it go faster too, right? 😉
KRAZGRLOrange County, CA · Jul 14, 2010#81 Originally Posted by
rye7jen ↑ Hi there! I have this Goo-gone also, but how did you applied it? I've read the directions but maybe you can share how did you apply this goo-gone thing. TIA 👍
I pretty much did what RedHatch did. :)
Simply squirt some on a paper towel, rub it on the foam that was stubborn and let it soak in. I was able to rub it off with the pad of my fingers and fingernails. Then I wiped down the area with water after to make sure any goo gone residue was gone.
A recent pic:

rye7jenSaudi Arabia · Jul 24, 2010#82 Originally Posted by
RedHatch08 ↑ It's quite easy. Here's what I did:
Just get your Goo Gone and some paper towel. Take 1 sheet and fold it up a few times to make a small square.
Apply some Goo Gone to the paper towel. Wipe it generously across the foam/tape that's left on the car. Coat it well and let it sink in for a minute or two.
Pick an edge to start from, and just use your fingers to start peeling the foam off.
Feel free to re-apply the Goo Gone periodically as you go. It does work better if you give it time to sink in and loosen the adhesive.
Also you may want to do this step at a car wash, like I did.
If you're anything like me, your car will end up with WD-40 and Goo Gone all over the place. After I was done I just gave it a car wash, and it was all nice and clean and debadged.
Thanks! I already used WD40 to remove the foam tape and it give a nice result too, I might used that "goo-gone" product next for my rear Toyota logo. 👍
JTDBT903NE. OHIO · Aug 10, 2010#83I have used a generic version of this 3m Pinstriping Remover wheel that I got from my local auto body paint store, I think I paid less than $20.00 for it and have removed countless emblems and even pinstiping on my '91 Caprice with little effort. Well worth it and no paint damage or marring at all. This is what professional people in autobody use to get the residual from emblems/moldings/striping off. This reminds me of a giant eraser [the good kind] that you used back in school. Put it in you cordless drill and your emblem [residual] will be gone in seconds. Take the actual emblem off with fishline first!
Link to a quick Google search.
http://www.yotatech.com/f2/how-pinst...ics-56k-70756/ Picture lost · www.crappled.com .Kevin.Prince George, BC. Canada · Oct 10, 2010#84would just WD40 and dentalfloss work for debadging and would it be easy to rebadge it again later
.Kevin.Prince George, BC. Canada · Oct 15, 2010#85bump my question still stands, wanna know if wd40 and dental floss will cut it, interested in blacking out yaris and toyota
donchaevictoria, bc · Oct 15, 2010#86 Originally Posted by
.Kevin. ↑ bump my question still stands, wanna know if wd40 and dental floss will cut it, interested in blacking out yaris and toyota
i used heat gun, wd40, and dental floss when i debadged my car.. they worked really well.. i think for the emblems to come off easily, you'd have to use a heat source. i don't know exactly if both just wd40 and dental floss would work just fine.
chrisjS. Jesus, Kentucky · Oct 15, 2010#87I used the heat of the sun and some fishing line to debadge mine. Took 30 seconds per. Dental floss broke on me every time. Besides, it was damned hard to find. People in S. Jesus don't floss...or have teeth! :)
ShinareOklahoma City, OK · Oct 24, 2010#88I removed and painted my emblems today but they are not on the car yet Still letting clear coat dry. I purchased the 3M body tape and was wondering if people covered every part of the emblems on the back with the tape or if they only did like the top and bottoms?
TylermayerSnohomish, WA · Oct 24, 2010#89 Originally Posted by
suprajoey ↑ Hahaha, i read the damm post three time, before i went out side to remove the front and paint it black, but the rear, you say it will leave two holes? so does this mean that the badge is held together by 2 small clips? or is it held together by 2 clips (+) Plus 3M tape?? Dammit, im just thinking of masking everything around it, and sanding/paint the badge on the car, just dont want to mess up my OEM Paint.😲
Thanks on the Awsome Thread👍👍
BTW: Heres mine.
-Not to worry, my little truck is getting lowered this Upcoming week as well..!!

thats what i did
TylermayerSnohomish, WA · Oct 24, 2010#90ShinareOklahoma City, OK · Oct 25, 2010#91 Originally Posted by
Shinare ↑ I removed and painted my emblems today but they are not on the car yet Still letting clear coat dry. I purchased the 3M body tape and was wondering if people covered every part of the emblems on the back with the tape or if they only did like the top and bottoms?
No hints on this? Actually its "Molding Tape" I thought it was the body tape. Went with red since I have a black yaris and used satin clear coat to give it a flat finish. Pics:
Picture lost · img258.imageshack.us Picture lost · img841.imageshack.us Picture lost · img408.imageshack.us CyclistHouston, TX · Nov 16, 2010#92Was wondering about your wheels? very nice!
what size are the rim and tire?
Nice.
ChaldonSan Jose · Nov 16, 2010#93What a nice thread to find at the top as a sticky. Exactly what I was looking for when I came in today.
Thanks JT for the informative link
Originally Posted by
JTDBT903 ↑
.Kevin.Prince George, BC. Canada · Nov 16, 2010#94How exactly do you securely put these back on? Like I haveo ne double sided tape but it blows ass I got it at Canadian tire
Yaris5ATL, Ga. · Dec 6, 2010#95Hey I have a 2010 yaris Hatch and I cant get the front emblem off for anything?
can anybody tell me how its attached or where to find the release pins to remove it?
also if anyone know where I can buy a replacement front emblem that'll be great also
thxs
casborne@hotmail.com ShinareOklahoma City, OK · Dec 6, 2010#96 Originally Posted by
Yaris5 ↑ Hey I have a 2010 yaris Hatch and I cant get the front emblem off for anything?
can anybody tell me how its attached or where to find the release pins to remove it?
also if anyone know where I can buy a replacement front emblem that'll be great also
thxs
casborne@hotmail.com
I just stuck my pinky fingers into the grill at about the 4 o'clock and 8 o'clock positions (I think the two grill holes at the very edges of my avatar pic I took of my emblem) and curled them around until I felt the push tabs holding it on and pushed them in towards the center of the emblem and it popped right off.
suprajoeyLos Angeles · Feb 5, 2011#97 Originally Posted by
Tylermayer ↑ heres mines
Wow, thats really clean looking.
Great thread and Good looking cars..!!👍👍
MitchReeves2967Kentucky · Jun 26, 2011#98I literally just used a putty knife and the back emblems came right off. Then after painting put them back on with Double sided tape. I also painted the chrome trim on the trunk.
eric_edgeSF Bay Area · Jul 10, 2011#99luvit
Red RaiderSanta Fe/Albuquerque, NM · Aug 17, 2011#100🙁 wish i read more rather than being impulsive and scratching the sticky debris with a card...not to noticeable from more than about 2 feet away... any solutions?