Yarisworld Archive

DIY Keyless Entry

83 posts · 96,952 views · page 2 of 2

Replies continued

CTScottUSA, CT · Oct 23, 2009#51
Originally Posted by RacerFreakXXX ↑
Is it possible to install a factory keyless entry on our cars? I know the remotes are like $200
Yes. There have been a couple of threads on it. You can purchase the remote receiver with two remotes. The part number is in one of the threads.
RacerFreakXXXSomers NY · Oct 28, 2009#52
o0o, great... so that's all I need? I'm going to search for those threads
silverbulletKentucky · Mar 7, 2010#53
I just installed "keyless" using DanQ's guide and I'm thrilled with the result - total success.
I don't know if it is widely known ( I'd hate to be redundant) but the Viper 211HV is identical to the Valet 712T; functionally, electrically, and physically. And they're both made by the same company. The only difference I can see is that the 211HV has a blue status LED. The Viper 211HV is sold on bestbuy.com for $139.99 with basic installation included. I got mine on ebay for $40.00 + $8.00 shipping.
My hat is off to DanQ for providing such an elegant DIY guide and for maintaining a website for easy access. I used CTScott's green wire mod but I agree with DanQ that it is good to get into the habit of using the remote to lock the car because it arms the optional ignition cut-off (regardless if it's installed) and causes the status LED to flash.
smell my fingerIllinois · Mar 16, 2010#54
This is going to help me big time. I've been meaning to do this for 4 years now.
smell my fingerIllinois · Mar 19, 2010#55
Dan Q and CTScott big thanks to you. I can't believe how easy it was once I figured it out due to your guys post. I ended up using the brown and green wire and took like 10 minutes to hook up. Works great and havn't ran into any problems with it. Again thanks for the DIY!
hangman41Poughkeepsie NY · Jul 21, 2010#56
Hello All -

I really need assistance on this one. I have added power windows and power locks (remote entry) to my daughters 2007 Yaris which she got for college and had no power accessories at all.
Everything works EXCEPT the locking portion.
Using the FOB it will Unlock if starting in a locked position, but the control box doesnt even make a noise like its trying to function when you hit the Lock button on the FOB, also the red led doesnt ever light or the valet buttone seem to function. It does unlock, and the panic button as well as teh Lock button work for Panic mode if you hold them down for 5 - 10 secs. I currently have it set up as the directions told me but at this point it could be the control box, maybe the tie in of the 2 ground wires, etc etc. I installed the Avital 2101L with the smaller (blue/green) control box that connects to the wires that go to the actuators. All of the tutorials on here have been great but I cant find anything showing the wiring connections of the 2101L "brain" and the smaller control box. Maybe the "Brain" needs resetting to factory but with out the Valet button working I cant reset any of the settings at all. I have tried both FOBs and they work for the Panic alarm and the unlocking. I also hae it wired for teh horn alarm, the flashing marker lights, etc and all of that works also.
Thanks for any help you can offer and please ask away on teh questions of anything I may have missed.
CTScottUSA, CT · Jul 21, 2010#57
Originally Posted by hangman41 ↑
Hello All -

I really need assistance on this one. I have added power windows and power locks (remote entry) to my daughters 2007 Yaris which she got for college and had no power accessories at all.
Everything works EXCEPT the locking portion.
Using the FOB it will Unlock if starting in a locked position, but the control box doesnt even make a noise like its trying to function when you hit the Lock button on the FOB, also the red led doesnt ever light or the valet buttone seem to function. It does unlock, and the panic button as well as teh Lock button work for Panic mode if you hold them down for 5 - 10 secs. I currently have it set up as the directions told me but at this point it could be the control box, maybe the tie in of the 2 ground wires, etc etc. I installed the Avital 2101L with the smaller (blue/green) control box that connects to the wires that go to the actuators. All of the tutorials on here have been great but I cant find anything showing the wiring connections of the 2101L "brain" and the smaller control box. Maybe the "Brain" needs resetting to factory but with out the Valet button working I cant reset any of the settings at all. I have tried both FOBs and they work for the Panic alarm and the unlocking. I also hae it wired for teh horn alarm, the flashing marker lights, etc and all of that works also.
Thanks for any help you can offer and please ask away on teh questions of anything I may have missed.

The control box not making a sound when you try to lock it and the valet switch not working really sounds like there is an issue with the control box.
hangman41Poughkeepsie NY · Jul 23, 2010#58
Originally Posted by CTScott ↑
The control box not making a sound when you try to lock it and the valet switch not working really sounds like there is an issue with the control box.
Yeah, thats kinda what Im thinking also. I cnat seem to find any information on the about ordering JUST that part. I may just have to ordrer a replacement set as cheaply as I can from EBay or Amazon and see.

Thanks for the reply.
marcustoronto, canada · May 3, 2011#59
what happen if i got oem keyless do i need a bypass to get an alarm..
jamal1984Georgia, USA · Aug 23, 2011#60
i just got this done yesterday thanks to all of y'all. Everything works great, except my flashing light is not working, but i can live with that.
KeliEronsUSa · Sep 12, 2011#61
This may be useful to you if you are doing an install of a full alarm system or remote start.
simon-templaxRome · Apr 7, 2012#62
Thank you so much DanQ & CTScott,

Today I installed a Viper 211HV keyless system on my Yaris Now 2011, and it works perfectly!!

Greentings from Rome
auxmikeLI, New Yawk · Apr 13, 2012#63
Thanks DanQ!
I just finished installing my Viper model 211HV and your instructions are PERFECT and 100% valid and correct.
After wiring it up initially, the lights worked fine and the dash light flashed correctly, BUT the darn unlock/lock was'nt working even though I heard the relays cycling in the Viper's brain box! Problem was that there are TWO green/black wires in the harness. One is light green/black and thin, the other is green/black and fatter guage wire. I spliced in the thinner one, WRONG! You must use the FAT green/black wire. I also grounded the black and purple wires under one of the bolts that holds that black metal bar across the metal dash frame. Its a good ground and I did'nt want to fool with the factory bolt behind the kick plate.
I mounted the LED next to the power mirror adjustment controls. It's very bright and DOES look like a real alarm armed light even though there's no alarm in my car. I used one zip tie through one of the Viper's brain box's corner mounting holes and zip tied it to a cutout in the bottom right of the opening that's revealed when you drop down the plastic access hatch.
First thing I did after installing and testing for proper function was disable the self locking feature that locks the doors when the engine is turned on. I don't want to risk getting locked out of my car while it's warming up on a winter morning and I'm outside scraping the snow off the windshield...
An excellent project if you have the power pkg but RKE was'nt available as a factory feature.
A word of warning; if your not electronics savy you may want to leave this to a pro....
viper.png
auxmikeLI, New Yawk · Apr 13, 2012#64
BTW, $48 shipped from Amazon.....
kerad84UK · Sep 9, 2012#65
hi has any one done DIY for Yaris 2002?
TickleTimeTimArkansas · Dec 29, 2012#66
just a few questions. and sorry for thread revival yet again..

does this work on base model without purchasing actuators?
how is everyone switching the pulse from one click to two clicks?
i plan to get the Viper model 211HV, like stated above, however, several different bundles are listed on ebay, any suggestions on which is best to buy?

thank you
CTScottUSA, CT · Dec 29, 2012#67
Originally Posted by TickleTimeTim ↑
just a few questions. and sorry for thread revival yet again..

does this work on base model without purchasing actuators?
how is everyone switching the pulse from one click to two clicks?
i plan to get the Viper model 211HV, like stated above, however, several different bundles are listed on ebay, any suggestions on which is best to buy?

thank you
If you have a base model without power lock, then no - You can control nonexistent actuators. If it is a base with power, but not keyless, then yes.

The keyless entry systems have configuration options, which allow things like single versus dual lock pulses.

On ebay the viper 211HVs are crazy cheap. Just make sure that you get one that is brand new, and not a used or theoretically refurbished one.
yfpLake Havasu City, Az · Mar 4, 2013#68
I have installed an Avital system using DanQ's instructions combined with
CTScott and SodiumDuck's addendum.....the Avital unit works perfectly....
I also installed it with the starter disabler, which required an add-on relay
available from Avital......everything works perfectly - wire colors and pinouts for connectors are the same so that all went really well....I got the Avital unit from Amazon
for $30.00 and the add-on relay from A-1 Electronics for another $10.00......
given how well ot all works and how easy it was to install (Mille Grazzi again to DanQ , CTScott and SodiumDuck) I'd have to say it was all money and time well spent!! :-)
ShinareOklahoma City, OK · May 13, 2013#69
I am adding my successful completion story thanks to these excellent step by step instructions and pictures and CTScott's revision picture. Thanks for both of your efforts to make this a pretty painless process.

One note, a list of "Things you will need" complete with sizes of splice connectors, other crimp-on needs, and tools might be a helpful suggestion. I found myself looking very closely at the pictures trying to figure out what size splice thingys I needed, and I had to just put the bare wires on the grounding lug because the loop thing I needed came as a complete surprise while in the middle of the installation.

Those wires in the kick plate and under the steering wheel are SUPER tiny sized, heh. In the pictures they look normal sized but in real life they are like strands of hair in my bulky man-hands. :) I was afraid the splice thingy was going to cut through them but they didn't! Excellent work you guys!

I had to have my daughter help me as I'm color blind and it was impossible to tell the difference in some of those wires! Evidently I would never make it as an automotive electrical technician. heh

PS> I used the Viper 211 kit found on ebay. Works flawlessly.
GAWADETN · Aug 7, 2014#70
How about a 2012? Will this work for it?
😕
Which kit is the best to use?
CTScottUSA, CT · Aug 7, 2014#71
Originally Posted by GAWADE ↑
How about a 2012? Will this work for it?
😕
Which kit is the best to use?
Like with cruise control, keyless is identical for your 2012 sedan. The 2012 sedan gets little love, as it was only sold as a fleet vehicle, so aftermarket companies don't really reference it.

As for brands, any of the DEI brands are good choices (viper, python, clifford, avital, etc.)
GAWADETN · Aug 7, 2014#72
Interesting, I guess I can confirm that as this car was a rental vehicle originally from FL. According to CarFax...
Darkhorse6Canada · Oct 26, 2014#73
been trying to figure this one out for 2 days now. I bought the avital keyless system from a-1 electric. I have an 08 yaris hatch with central locking (lock button in between the front seats)... I can get it to unlock all the doors and flash the parking lights, so everything seemed to be going well.

No matter what I do, I can't get it to lock the doors. I followed the DIY on here and connected the unlock wire to the green wire in GD1, my lock wire is connected to the thin brown wire. Is it possible the brown wire in my car doesn't carry the lock signal??
CTScottUSA, CT · Oct 26, 2014#74
Originally Posted by Darkhorse6 ↑
been trying to figure this one out for 2 days now. I bought the avital keyless system from a-1 electric. I have an 08 yaris hatch with central locking (lock button in between the front seats)... I can get it to unlock all the doors and flash the parking lights, so everything seemed to be going well.

No matter what I do, I can't get it to lock the doors. I followed the DIY on here and connected the unlock wire to the green wire in GD1, my lock wire is connected to the thin brown wire. Is it possible the brown wire in my car doesn't carry the lock signal??
Take a look at the revised one that I put together after installing it one the first one of mine. There is an issue with this one where if you have operated the lock on the door manually, the remote will not work properly. The correct wires for lock and unlock are noted in mine (if memory serves me correctly, it is only one of the two that is incorrect):

Remote Start DIY Wiring Guide 2006-2010 Yaris
Darkhorse6Canada · Oct 28, 2014#75
Hi CTScott,

Thanks for the reply. I did find your other post and had changed my unlock wire from orange to green. So everything works for UNlocking. The lock wire in the diy and in your post is the brown wire in gd1 pjn 5. I did notice in another post in the link you provided that there may be another LOCK wire in that GD1 harness. Could that be the issue?
CTScottUSA, CT · Oct 28, 2014#76
Originally Posted by Darkhorse6 ↑
Hi CTScott,

Thanks for the reply. I did find your other post and had changed my unlock wire from orange to green. So everything works for UNlocking. The lock wire in the diy and in your post is the brown wire in gd1 pjn 5. I did notice in another post in the link you provided that there may be another LOCK wire in that GD1 harness. Could that be the issue?
Lock is definitely the brown wire on GD1. Try touching a jumper wire from it's pin to the chassis ground bolt and if it locks when you do so, either your connection to the wire is bad or your device has a bad output relay.
CTScottUSA, CT · Dec 18, 2015#77
Originally Posted by advmedic ↑
Hi, I just got my Yaris this week. 2009 sedan. Planning on this and cruise control first thing :) Does anyone still have the guide for this? The link is dead :(
Mine is still working and has some corrections to this one:

Remote Start DIY Wiring Guide 2006-2010 Yaris
tmontagueCaledonia Ont. · Dec 20, 2015#78
I ordered a keyless entry for my '08 sedan to install in a few days when my exams are over. I saved CTScott's outline of the wires which should be a big help.

I decided to go w/ the Viper 211 as I don't need the remote starter just the keyless entry.

I'll be installing it Wednesday and I wanted to check in if there was anything that I should look out for on this install? I have experience with electrical but I just want a heads up if anything comes as a surprise.

The questions I have is: I do not want the car to auto lock when the ignition is turned on. Can I just not connect that wire from the control to the car and everything else should still work fine with the system?

Also, I'd like to avoid having the issue with the keyless entry not working if the car is locked from inside. Is the manual that CTScott posted up to date in terms of the showing the correct wired to splice so that this issue doesn't happen?

Thanks guys, I'll post back with how it all goes.
tmontagueCaledonia Ont. · Dec 22, 2015#79
bump...picking it up tomorrow
tmontagueCaledonia Ont. · Dec 25, 2015#80
Alright I took some time and sat down and read through the installation manual to get the install ready for tomorrow. since Dan's DIY is no longer available on line (if anyone has it please let me know) I have a few Q's regarding the wiring.

1. Where are the input and output of dome light relay wires located? I'd like my dome light to go on when the car is unlocked so I'm assuming I need to connect both the input and output but it was not labelled in CTScotts well labelled guide.

2. In CTScotts guide at the very bottom for the keyless entry part it shows "transponder key bypass module connections" Do I need to tap into these just for a keyless entry (no remote start or alarm)? My understanding was I only need to connect the Viper Modules yellow wire to ignition so that I could get the locks to unlock when the ignition is off.

3.For the lock and unlock wire I am tapping into (the brown and green ones) on the yaris. What wires do I use from the Viper module? They have 3 unlock and 3 lock wires coming from that module. They are labelled as "lock common output, lock normally closed and lock normally open (input)" same for the unlock wires. What wires from the viper module do I need to use to connect to the yaris lock and unlock wires?

4. Where do I connect the viper blue wire "second unlock output" so that I have progressive unlocking? Does it connect to the unlock wire as well that was labelled in CTScotts guide?

5. Do I need to bother with any of the other wires that go to the ignition such as "unlock 87a normally closed" if all I want is for the ignition to unlock the locks when turned off? Or is just the yellow viper wire connected to 12v ignition adequate enough?

Thanks guys
CTScottUSA, CT · Dec 26, 2015#81
Since this thread is dead post any questions that you have on the thread for mine, so it is not spread between two threads.
tmontagueCaledonia Ont. · Dec 26, 2015#82
Originally Posted by CTScott ↑
Since this thread is dead post any questions that you have on the thread for mine, so it is not spread between two threads.
done, Remote Start DIY Wiring Guide 2006-2010 Yaris thanks CTScott
yangluchanCanada · Sep 27, 2020#83
I try open
Virus alert