DanQOriginal postLake Zurich, IL · Oct 20, 2008#1I looked through the Yarisworld site when I joined and couldn't find all of the info I needed to add a keyless entry system to a Yaris with power windows and door locks, so I created my own web site.
Details to install a Valet 712T in an 08 varis LB. This should work for sedans as well. You can get the unit off the web for ~$40. Do the install yourself and save $50.
Let me know if this works for you.
Good Luck
Dan
Replies 82
DanQThread starterLake Zurich, IL · Oct 20, 2008#2I found this
factory repair manual (supplied by etimago) useful for the finding the right wires in the harness and connector locations. This may be useful to you if you are doing an install of a full alarm system or remote start.
TinyGiantRochester, NH · Oct 20, 2008#3the local car audio wanted $150 for the keyless system they have to sale installed... i think its probably a much better system.. but still...
TheRealEnthMiami, FL · Oct 20, 2008#4This is still a pretty good addition that should be added to the Yaris DIY manual
Bob_VTVermont · Oct 20, 2008#5I used this diagram and instructions when I got the same keyless entry.
This is useful!
aca72Santa Clara, CA · Oct 20, 2008#6 Originally Posted by
TinyGiant ↑ the local car audio wanted $150 for the keyless system they have to sale installed... i think its probably a much better system.. but still...
Also check Best Buy and Circuit City.
lita_gDeland, FL · Oct 24, 2008#7Dan:
I have a question. I had the dealership install a remote keyless system on my 08 yaris LB, and well, it hasn't been a good experience. Anyway, the problem is they installed some aftermarket system, which when I lock the doors using the button on the door of the car, well, it won't unlock with the remote keyfob, I was wondering if you have the same problem with the unit you have (meaning it's a problem with the car), or does it always unlock without considering how the doors were locked?
I would really appreciate if you could confirm that for me, thanks!!!!
DanQThread starterLake Zurich, IL · Oct 27, 2008#8 Originally Posted by
lita_g ↑ Dan:
I have a question. I had the dealership install a remote keyless system on my 08 yaris LB, and well, it hasn't been a good experience. Anyway, the problem is they installed some aftermarket system, which when I lock the doors using the button on the door of the car, well, it won't unlock with the remote keyfob, I was wondering if you have the same problem with the unit you have (meaning it's a problem with the car), or does it always unlock without considering how the doors were locked?
I would really appreciate if you could confirm that for me, thanks!!!!
Mine works similar to what you describe. If you lock manually, the remote unlock doesn't work. You have to unlock manually and then the remote lock will lock and unlock again. It might be a security feature, if you manually lock yourself in the car you are protected from someone entering with a remote unlock. To be honest, I never manually lock the doors. As I walk away from the car, I lock them with the remote...
b_hickman11Tyler, TX · Oct 28, 2008#9 Originally Posted by
aca72 ↑ Also check Best Buy and Circuit City.
yea if you like getting raped......
CaptainYarisNewport News, VA · Nov 9, 2008#10Wonderful walkthrough. Took it step-by-step on my 4 door and it worked perfectly. got the same system from Circuit City on sale. Not a bad upgrade for $50
RevssonSoutheast Wisconsin · Nov 9, 2008#11yarstarGeorgia · Nov 9, 2008#12Just wanted to give props to DanQ. I used his DIY this summer and got one off Ebay for $35. Major easy. I even mis-wired it the first time and DanQ quickly answered my email and helped me get it straightened out. It's been working great ever since.
I too have the problem with the manual door locks conflicting with the remote. I just use the remote all the time and its never really a problem. The door switches still work if needed.
DanQ really made a $200+ upgrade down right affordable. Really good DIY. Thanks again Dan.
🙇
CTScottUSA, CT · Nov 9, 2008#13 Originally Posted by
yarstar ↑ Just wanted to give props to DanQ. I used his DIY this summer and got one off Ebay for $35. Major easy. I even mis-wired it the first time and DanQ quickly answered my email and helped me get it straightened out. It's been working great ever since.
I too have the problem with the manual door locks conflicting with the remote. I just use the remote all the time and its never really a problem. The door switches still work if needed.
DanQ really made a $200+ upgrade down right affordable. Really good DIY. Thanks again Dan.
🙇
Check out my post on this thread for the correction to the door switch issue:
Keyless question DanQ, you might want to try it as well and then update your DIY.
I am working on a DIY for Remote Start / Keyless entry for 07-09 with and without engine immobilizer.
b_hickman11Tyler, TX · Nov 10, 2008#14 Originally Posted by
CaptainYaris ↑ Wonderful walkthrough. Took it step-by-step on my 4 door and it worked perfectly. got the same system from Circuit City on sale. Not a bad upgrade for $50
Hopefully nothings goes wrong with. Circuit City filed for bankruptcy today and are shutting down a lot of their stores. My local store is suppose to be shutting down by Jan 1.
CaptainYarisNewport News, VA · Nov 12, 2008#15Looks like i need to go back and tap into the green wire. another problem i was having is that when i turn on the car, all the doors go through the "unlock" cycle. hopefully this issue will be remedied by this as well.
CTScottUSA, CT · Nov 12, 2008#16 Originally Posted by
CaptainYaris ↑ Looks like i need to go back and tap into the green wire. another problem i was having is that when i turn on the car, all the doors go through the "unlock" cycle. hopefully this issue will be remedied by this as well.
The unlock on start issue is probably a "programming option" for the keyless entry.
CaptainYarisNewport News, VA · Nov 13, 2008#17 Originally Posted by
CTScott ↑ The unlock on start issue is probably a "programming option" for the keyless entry.
I've looked through the programming guide and i think i'd have to disable the "lock on start" to disable the quick unlock on start. Its really not that big of a deal.
But the switch to the Green wire worked wonderfully, although i have to say the Valet system is a little slow to respond between the first press and the 2nd press, you have to wait for the parking lights to stop flashing before you press the button a 2nd time.
CTScottUSA, CT · Nov 13, 2008#18 Originally Posted by
CaptainYaris ↑ I've looked through the programming guide and i think i'd have to disable the "lock on start" to disable the quick unlock on start. Its really not that big of a deal.
But the switch to the Green wire worked wonderfully, although i have to say the Valet system is a little slow to respond between the first press and the 2nd press, you have to wait for the parking lights to stop flashing before you press the button a 2nd time.
Does the valet have a mode for double pulse of the unlock wire? My UltraStart did and it makes life a lot easier than having to press the remote twice.
CaptainYarisNewport News, VA · Nov 13, 2008#19I'm not sure if it has a double pulse mechanism. that was actually the issue i was trying to avoid. i like being able to just unlock the driver side door.
ToddRNorthern IL · Nov 29, 2008#20Installed mine this afternoon using Dan's DIY instructions and the info. from
this thread.
It was a lot less intimidating once I removed the unused wires from the 712's wiring harness. I decided not to hook up the horn wire since I leave for work at 3:30 in the morning. 😁
So far I like the ignition controlled locking, but I think I might turn off the ignition controlled unlock. The unlocking seems like a safety hazard to me.
I turned on the double pulse for remote unlocking so all three doors unlock at once. I like to throw my backpack in the hatch when I leave the house and this makes it easy.
All said and done it was much easier than I thought it would be, now I need to order some foglights.
TinyGiantRochester, NH · Nov 29, 2008#21i think i am going to get this kit

TinyGiantRochester, NH · Nov 29, 2008#22# Arming reminder and auto-rearming (programmable)
# An operation manual & installation wiring diagram included
# Central car lock automation
# Code learning and Valet mode
# Dome light supervision
# Door-open alert and Anti-hijacking
# Remote silent arm/disarm
# Remote control door lock/unlock (arm/disarm)
# Remote car finder, panic and trunk release
# Status memory when power-off
# Smart shock sensing (adjustable sensitivity)
# 100 feet remote control range
# Comes with :
Alarm remote come with blank key x2
(Keys may require modifications to fit on specific models)
Alarm system brain x1
Alarm system sensor x1
Alarm system siren x1
Alarm system wire harness
cdaddy626Washington · Feb 15, 2009#23I would like to thank Dan for creating this great DIY, installed 712t yesterday on my 2009 with no problems. Only difference to note is D3 connector on my car has more than just a black wire, there are actually 3 other wires on this connector. Also had to completely un-bundle the wires going to the 20 pin connector because there are 2 brown wires, very easy to get confused on which one is the LOCK one. I would like to send a thanks to Scott for his help via PM's as well.
cdaddy626Washington · Mar 2, 2009#24I was trying to get this to unlock all 4 doors and hatch with one press of the un-lock but I have to press it multiple times. I programmed for double pulse unlock but that doesn't work. Any ideas? Install was on 2009 and conducted exactly as per the DIY. Thanks....
CTScottUSA, CT · Mar 2, 2009#25 Originally Posted by
cdaddy626 ↑ I was trying to get this to unlock all 4 doors and hatch with one press of the un-lock but I have to press it multiple times. I programmed for double pulse unlock but that doesn't work. Any ideas? Install was on 2009 and conducted exactly as per the DIY. Thanks....
With the double pulse unlock mode, do you hear the door locks click twice? If not, that mode may not really be selected.
I programmed my UltraStart to do the double unlock and when I press the unlock button on the remote I hear the front door click, then about a second later, the other three and the hatch click.
TamagoOff Grid · Mar 2, 2009#26 Originally Posted by
DanQ ↑ I looked through the Yarisworld site when I joined and couldn't find all of the info I needed to add a keyless entry system to a Yaris
here you go..
Picture lost · www.innfusion.com please people, take it for what it is.. a joke....
Russelt3hPirateEpcot · Mar 2, 2009#27IBBan
cdaddy626Washington · Mar 4, 2009#28 Originally Posted by
CTScott ↑ With the double pulse unlock mode, do you hear the door locks click twice? If not, that mode may not really be selected.
I programmed my UltraStart to do the double unlock and when I press the unlock button on the remote I hear the front door click, then about a second later, the other three and the hatch click.
No, I don't. I went in and deactivated and then reactivated the double pulse and still have to push unlock 3 times to get all the doors to unlock..
CTScottUSA, CT · Mar 4, 2009#29 Originally Posted by
cdaddy626 ↑ No, I don't. I went in and deactivated and then reactivated the double pulse and still have to push unlock 3 times to get all the doors to unlock..
Hmmmm. I just looked at the manual for the 712t. The only thing I can see is that maybe the double pulse time is set too short. It can be set for 0.8, 3.5, or 0.4 seconds. The default is 0.8, so try the 3.5 second option. (My ultrastart waits two seconds between the first and second pulse, and that works fine).
cdaddy626Washington · Mar 6, 2009#30 Originally Posted by
CTScott ↑ Hmmmm. I just looked at the manual for the 712t. The only thing I can see is that maybe the double pulse time is set too short. It can be set for 0.8, 3.5, or 0.4 seconds. The default is 0.8, so try the 3.5 second option. (My ultrastart waits two seconds between the first and second pulse, and that works fine).
I was wondering about that setting myself, I will give it a try and see what happens. Thanks.....
TreyzLong Island, NY · Mar 7, 2009#31There used to be a DIY thread by W.A.S.P., but i guess this was deleted in the hack. It's what I used when I did mine and I hooked mine up to the horn for audible confirmation rather than just the lights.
cdaddy626Washington · Mar 9, 2009#32I like it the way it is with the exception of not being able to unlock all the doors with one press of the button. I tried changing the pulse time to 3.5 but it doesn't do anything. I give up, I guess I will just have to keep pressing the button 3 times to open all doors. Thanks to all for the suggestions.
DanQThread starterLake Zurich, IL · Mar 11, 2009#33 Originally Posted by
cdaddy626 ↑ I like it the way it is with the exception of not being able to unlock all the doors with one press of the button. I tried changing the pulse time to 3.5 but it doesn't do anything. I give up, I guess I will just have to keep pressing the button 3 times to open all doors. Thanks to all for the suggestions.
Haven't been around the forum lately. Sure is alot of unrelated stuff on this tread now. Anyway, my DIY was set up for a hatchback. Something to try. Does the button on the door unlock all the doors? If it does, are you sure you tapped into that wire? This is where a sedan may be different than a LB.
pariahdecssMassachusetts · Mar 14, 2009#34quick question on this - I installed this exact system using Dan's instructions - everything works great by remote . . . but if my passenger manually locks her/his door before exiting the vehicle, then when we return to the car the remote will not unlock the passenger's door that was locked manually. Did I do something wrong? - or is this how it works for everybody with this system? - - 09 LB - thanks
CTScottUSA, CT · Mar 14, 2009#35 Originally Posted by
pariahdecss ↑ quick question on this - I installed this exact system using Dan's instructions - everything works great by remote . . . but if my passenger manually locks her/his door before exiting the vehicle, then when we return to the car the remote will not unlock the passenger's door that was locked manually. Did I do something wrong? - or is this how it works for everybody with this system? - - 09 LB - thanks
Take a look at the following. The unlock wire in Dan's guide unlocks all doors with one pulse, but it confuses the car's ECU when you manually lock the door (it's fine if you lock with the remote though). If you use the lock and unlock wires shown below, the driver's door will unlock on the first pulse and all others on the second.
Keyless question pariahdecssMassachusetts · Mar 14, 2009#36I'll have to double check, but that is how it works for me. I have my remote set to double pulse so it unlocks the driver's door . . . pauses a few seconds and then you hear it unlock everything else - but I still have the manual unlock problemo - I think . . .
I will have to verify that I used the correct wires per your picture - but I did see that thread before I did my install
Thanks Scott
Mike
cdaddy626Washington · Mar 19, 2009#37 Originally Posted by
DanQ ↑ Haven't been around the forum lately. Sure is alot of unrelated stuff on this tread now. Anyway, my DIY was set up for a hatchback. Something to try. Does the button on the door unlock all the doors? If it does, are you sure you tapped into that wire? This is where a sedan may be different than a LB.
I too have a hatchback, and yes the button on door unlocks all doors. Not sure if I am on the right wire, I tapped in in accordance with your DIY and CTScott's addition with using the green unlock wire.
CTScottUSA, CT · Mar 19, 2009#38 Originally Posted by
cdaddy626 ↑ I too have a hatchback, and yes the button on door unlocks all doors. Not sure if I am on the right wire, I tapped in in accordance with your DIY and CTScott's addition with using the green unlock wire.
It sounds like there may be something wrong with your module, since it doesn't seem to actually put out the double pulse. You can use the unlock wire from DanQ's DIY if you only use the remote to lock the car.
The wire that he indicates unlocks all doors with one pulse, but if someone manually locks a door with the button before exiting, you will have to use the key to open the door.
PatrickJohnsonMurfreesboro, TN · Jun 26, 2009#39I bought the valet kit and will be attempting this next week. I'll post results...
TreyzLong Island, NY · Jun 26, 2009#40All I know is that I'll be doing this install again ... sigh ... lol as well as the fog lights too!
I bought the kit and did the install. Works great!
Thank you DanQ and CtScott :)
PatrickJohnsonMurfreesboro, TN · Jun 30, 2009#42hell yeah! took me about an hour and the tutorial was great! thanks!
RUFFSTUFFKINGSLAND, GA · Aug 5, 2009#43You guys have me sold... I'm going to buy a Valet 712T and do it myself when it comes in...
RUFFSTUFFKINGSLAND, GA · Aug 5, 2009#44Are any additional parts required to connect a remote trunk release with the Valet 712T?
CTScottUSA, CT · Aug 5, 2009#45 Originally Posted by
RUFFSTUFF ↑ Are any additional parts required to connect a remote trunk release with the Valet 712T?
If the Sedan's trunk release lever is mechanical (like the fuel door release), then you would need a cable actuator to trigger it.
RUFFSTUFFKINGSLAND, GA · Aug 6, 2009#46 Originally Posted by
CTScott ↑ If the Sedan's trunk release lever is mechanical (like the fuel door release), then you would need a cable actuator to trigger it.
Ok, thanks for the tip! 🤘
RUFFSTUFFKINGSLAND, GA · Aug 10, 2009#47The Valet 712T I ordered came in today... My 1st Yaris project awaits...
RUFFSTUFFKINGSLAND, GA · Aug 10, 2009#48Just installed the Valet 712T... What a sweet setup! Install was pretty easy... A super big thanks to DanQ and CTScott for their help. I have the double pulse setup to unlock all the doors on one push and have no issues with manual/remote locking or unlocking... you do have to hold the button for awhile to get the panic feature going though... 😲
RacerFreakXXXSomers NY · Oct 23, 2009#49Is it possible to install a factory keyless entry on our cars? I know the remotes are like $200
jamal1984Georgia, USA · Oct 23, 2009#50thanks for this, i will do this in the winter time when i have some spare times at work.