Yarisworld Archive

DIY: CHANGE MANUAL TRANNY OIL

150 posts · 175,391 views · page 2 of 3

Replies continued

Hersheynortheast · Sep 1, 2010#51
Originally Posted by DeathBeard ↑
Is 75w90 the correct weight for 5 speed?
yes , GL-4 as well . Not GL-5 .
sleey0PA · Sep 1, 2010#52
Hmmm.

I used red line 75w90 that was GL-5.

Is this going to be an issue? What are the drawbacks to using this oil vs. the MT-90 which is GL-4?
sleey0PA · Sep 1, 2010#54
It is the NS 75w90.

I'll call em up. Thanks!
Hard_YarisEdmonton Alberta · Sep 2, 2010#55
Replaced my Manual Transmission oil with red line approx 10,000km ago.

The old oil in the transmission was a shimmery sliver blackish sludge... for sure worth draining the old stuff.
sleey0PA · Sep 2, 2010#56
Wow.

Mine was very clear and had 22k miles on the tranny oil.

Shouldn't have been black sludge.
Hard_YarisEdmonton Alberta · Sep 2, 2010#57
I bought the car and it had about 80,000km. I'm Sure the dealer did not change the oil at the recommended interval.

Had a Echo before with 200,000km before it was a write-off.... Great Cars!
nick.dollimountHalifax, NS Canada · Sep 3, 2010#58
I finally did this yesterday! ...after asking about it last year sometime... I have 57,000Km on mine. The stuff that came out of it was pretty dark; almost black. It smelled awful... I couldn't get the smell out of my nose for hours afterward. Anyway, down to the important part... it made a good difference. Especially putting it into reverse! And if it's true that it only gets better, I'm very excited! Unfortunately, I couldn't get any of the good brands that were mentioned throughout this thread and I was stuck with buying Motomaster brand. Fully synthetic 75w90 stuff. It seems to be doing the trick though. Anything that's better than before is good in my books.

Funny though, the last 2 times I took it into the dealership to get things checked, one of which was Tuesday, I explained how the shifting has become a lot harder to put into gear. Both times they had on the receipt, "Test drove, shifting normal for Yaris." Now I'm really tempted to give them a call and let them know how my shifting is now after changing that out. On top of that, before ever getting them to check it, I had called about it prior and asked about changing the transmission oil. The guy on the phone said there isn't anything for the transmission to be changed. WTF....

All in all, I'm really glad this forum is here. Doing my own maintenance is a million times better. It's cheaper, it gets done faster, and I don't have to deal with lazy people lying to my face.
fumoffu1089Sydney · Sep 4, 2010#59
i just bought redline Mt90. Just wondering do I need to flush out the factory oil before refilling it with the good stuff?
sleey0PA · Sep 4, 2010#60
No, you don't need to flush.

Just make sure you do the change on a level surface to get most of the old oil out.

On another note, has anyone ever smelled redline's gear oil? HOLY FUCK!

That stuff is the NASTIEST shit I have ever smelled. And that is saying a lot because I was an RN for 7 years.
ddongbaphay · Sep 7, 2010#61
Okay, so the NEO I had before, is crap. Made all my gears grind.

Redline Lightweight Shockproof oil. That stuff is a trump card in the hole.
grimjukSouth Australia · Sep 11, 2010#62
Hey guys, I've been driving my '07 Yaris YRS hatch for about a week now, I've driven ~200 kilometres, and I've noticed that getting into reverse is a little touchy, and third is a little rough.

The car was at 61800k's when I purchased it, what are the chances the tranny fluid has been changed? Should I have a go at changing it? I have next to no mechanical experience with cars, what are the odds of something going wrong?
fnkngrvIn The Hotbox · Sep 11, 2010#63
Just ordered myself 2 qts for the change to occur soon. 30 bucks with shipping thru Summit. Seems like 25-30 bucks is what you pay to get it up my way. No one is an authorized retailer for the MT90 within 150 miles of me in the States.
KazimodoMontreal subburb · Nov 1, 2010#64
Well after all the warnings , I was expecting to have a fight
withthe fill plug , but NO , nothing , didn't have a 24mm socket ,
so I used a 15/16 inch socket , just checking for clearence from floor
to fill plug , without really trying and it came loose , same for drain plug
100,000 KM on Yaris , first manual trans oil change on this car ,
came out still golden color , no smell (compared to auto trans smell 😲)
I put in the 75W90 semi-Synthetic
that I could find at Canadian Tire , blue bottle , it is GL4 ,
the other more expensive one is GL5 , no thanks .
I didn't want to run around town looking for Amsoil or redline
so I'll be the Ginney Pig with this oil .
I'll let you all know if any thing feels weird .
If it feels weird I'll look for Amsoil next change .
bankrobberCentral Florida · Nov 1, 2010#65
Originally Posted by sleey0 ↑
No, you don't need to flush.

Just make sure you do the change on a level surface to get most of the old oil out.

On another note, has anyone ever smelled redline's gear oil? HOLY FUCK!

That stuff is the NASTIEST shit I have ever smelled. And that is saying a lot because I was an RN for 7 years.

All gear oil is like that after used. I drained the axles in my 3/4 Dodge in the Garage and the smell got into my A/C in the house. Just having the drain pan sitting on the floor
yaris2010RSAngus, Ontario · Nov 2, 2010#66
this is gonna seem like a stupid question but im thinking of changing my tranny oil..... its a 2010 and it only has 31,xxx km on it..... im jsut sick of the the grinding into reverse and i do drive fairly hard and feel a better quality oil would benifit. what do u think? is it worth it? i was thinking either royal purple or redline.
soloecho2Orono, Ontario · Nov 2, 2010#67
Id go for the Redline MT 90.
rningonfumesSoCal · Nov 2, 2010#68
Will do this soon, does anyone have the pics saved ( or is it just my computer that they don't show).

Second question is where to get Redline?
jamal1984Georgia, USA · Nov 2, 2010#69
i'm on Royal Purple now, and my gears still grind somehow, reverse still stuck on cold morning, first gear still stiff, maybe Redline next time and compare.
Hersheynortheast · Nov 2, 2010#70
ROYAL PURPLE likely to be a GL-5 which is the same as the factory fill which causes the grinding and clunking into reverse . You'd want a GL-4 , like that of REDLINE MT-90 . Does make a big difference . Better shifting on cold days with MT-90 . Changing the gear oil is easier than a oil change . After the fill of the GL-4 , work through all the gears ( reverse too ) and before you know it shifting is a breeze .
ShinareOklahoma City, OK · Nov 2, 2010#71
I called around, found a place local that will sell the redline MT-90 for $9.95 per qt. Going to do this this weekend. I've noticed since I got the car that reverse is pretty chunky if not a little grindy at times. Will try this. No problems with any of the other gears.

Going to have to buy a few things first. I've never seen a funnel like pictured in the DIY. I'm going to have to get something similar to put it in that side plug. I also don't have a torque wrench. A friend of mine that I work with who also works on motorcycles says 29 ft-lbs of torque is not very much. Just a slight muscle flex as your tightening it after its all the way on. (course he's a pretty big guy so that's relative) Should I buy a torque wrench just for this? Is the torque that important? I also will need to get some kind of pan to drain it into. Do i just take the used oil to wal mart or somewhere? It's probably a good idea to buy something to transport the old oil in rather than in the open pan in the back seat, heh. Goodness, this is adding up.
marcustoronto, canada · Nov 2, 2010#72
Originally Posted by yaris2010RS ↑
this is gonna seem like a stupid question but im thinking of changing my tranny oil..... its a 2010 and it only has 31,xxx km on it..... im jsut sick of the the grinding into reverse and i do drive fairly hard and feel a better quality oil would benifit. what do u think? is it worth it? i was thinking either royal purple or redline.
lol..even new car can grind on reverse..you have to know a trick.. all you need to do is slap it on any forward gears before reverse..i use first or second gear then reverse and youll be grindless fro life unless ur synchro goes.
ShinareOklahoma City, OK · Nov 2, 2010#73
Originally Posted by marcus ↑
lol..even new car can grind on reverse..you have to know a trick.. all you need to do is slap it on any forward gears before reverse..i use first or second gear then reverse and youll be grindless fro life unless ur synchro goes.
Wow, did not know this. Sounds like a great tip!
Hersheynortheast · Nov 2, 2010#74
Do this if you don't have a torque wrench . Take a medium to fine SHARPIE permanent magic marker with black ink and draw a line on the drain fill plugs and the tranny itself so they line up . Then write D.P. ( drain plug ) or F.P. ( filler plug ) on the plug so when you put them back in you'll be using the same plug so they will line up . Can tighten it just a bit more beyond the mark on the tranny , if needed .
ShinareOklahoma City, OK · Nov 2, 2010#75
Went out to take the pic for my avatar just now and drove to a different parking place in the sun. I went from driving around in first to putting it into reverse to back into the parking place. Slight grind in the gear as I placed it into reverse. *shrug* hopefully the gear oil change will help.
yaris2010RSAngus, Ontario · Nov 2, 2010#76
Originally Posted by jamal1984 ↑
i'm on Royal Purple now, and my gears still grind somehow, reverse still stuck on cold morning, first gear still stiff, maybe Redline next time and compare.
inside the engine bay on ur tranny check ur linkages and grease/oil where felt needed. my 5th and reverse were stiff and toyota did this for me now all gears go with with ease
jmjoneseyNorth Carolina · Nov 28, 2010#77
Just wanted to say thanks OP for posting this, I am doing a ton of 60k maintenance on my car, new plugs, new brake pads, and now thanks to you i have new tranny oil :-) much obliged!
IrishMountville, PA · Feb 26, 2011#78
Another thanks to the OP for this very helpful thread. I just passed 100,000 miles on my '07 and even though the dealer said that the transmission oil didn't need to be changed, I went ahead and bought some MT-90 from amazon.com and changed it today in addition to the coolant. Many thanks for this forum.
JDfan33Northeast US · Mar 15, 2011#79
Great thread and thx for the great pic's
ecc_33OHIO · Apr 6, 2011#80
I just changed my trans fluid today at 55,400 miles, Tranny fluid looked as good as new when coming out. No metal flake look to it. Installed 75w-90 Royal Purple and went for a drive. Well don't waste your 30 bucks on this oil. My car did shift better. On cold days before it would be stiff or hard to get into gear down shifting to second and to first. It is better, but not as good as I was hoping. In 5,000 miles when I change my oil I will be going to MT-90 and will update you guys on how that performs.
Hersheynortheast · Apr 7, 2011#81
Big difference , when cold shifting and no clunking into reverse . After the change , take it out for a spin and work through all the gears , including reverse . Not long after you'll be in for a smooth transition .
ecc_33OHIO · Apr 7, 2011#82
drove 70 miles round trip from home to work than back. Still not as impressed as what i figured it will be. like I said I will change it again at 60,000 and try red line. When I first took off this morning it was about 40* out. It did shift amazing when the car was cold. But after about 10 miles it felt almost as if it was the old fluid. Oh well. It would be nice if it got better after a few more miles. Time will tell.
rningonfumesSoCal · Apr 9, 2011#83
Can't see Pics.
Hard_YarisEdmonton Alberta · Apr 26, 2011#84
Originally Posted by Shroomster ↑
just to clarify for those of us with auto transmissions....what you all are doing is just draining and filling the trans pan.

what supmet stated was $250 was probably a fluid exchange (flush and fill)

which takes all the fluid out including that in the torque converter.
What about the manual transmissions? is there more oil left in the transmission when we drain and fill? This one guy was trying to sell me a $200 transmission fluid flush and fill.

Does anyone know?
ExocetComVictoria, BC Canada · Jul 9, 2011#85
Brief necro, but wanted to thank the OP for the informative DIY guide. Drained and filled my RS 5MT with Redline MT-90 today and even after only a dozen km of testing, it feels great. Shifts are smoother than on the stock gear oil, and the entire process only took an hour or so.

For those with Tanabe DF-210's installed you can reach both the drain and fill plugs without jacking the car, but it's pretty cramped. I did have to loosen the under-air dam shroud to get good access to the bolts.

Interestingly, I loosened the filler bolt with an air tool and, not knowing that the bolt only had about 3/4" of thread on it, took the entire thing off in one swift go. The result was more than a cup of gear oil spilling out. The two quarts I added after the drain got me right to the proper fill (i.e. right at the bottom of filler plug), but it makes me wonder how I got so much oil in there before.

tl;dr, Redline MT-90 is great so far, process was simple and cheap for DIY, lowered cars can be refilled without jacking, though it is more difficult.
Hard_YarisEdmonton Alberta · Jul 13, 2011#86
Yes Thanks OP!
Redline MT-90 is the BEST! GL-4 all the way!
Just did another Transmission fluid change.
I found it easier to remove the entire air box to gain access to the fill plug from the top with a funnel and tube.
bronsinnj · Jul 14, 2011#87
Originally Posted by Hershey ↑
Do this if you don't have a torque wrench . Take a medium to fine SHARPIE permanent magic marker with black ink and draw a line on the drain fill plugs and the tranny itself so they line up . Then write D.P. ( drain plug ) or F.P. ( filler plug ) on the plug so when you put them back in you'll be using the same plug so they will line up . Can tighten it just a bit more beyond the mark on the tranny , if needed .
Hmm interesting thing to do. But would it work if you changed the sealing washer? (also unecessary)

Torque wrench complete overkill for something like this however. Manual says something like "Torque the oil filter with a torque wrench. If you dont have one take it to your dealer for proper torque."

Just intimidating the public Im afraid. The bastards. Actually torqueing the OF to their spec will prolly result in it being nearly impossible to remove IME.
maximapitkoMinneapolis, MN · Jul 17, 2011#88
Originally Posted by yaris2010RS ↑
this is gonna seem like a stupid question but im thinking of changing my tranny oil..... its a 2010 and it only has 31,xxx km on it..... im jsut sick of the the grinding into reverse and i do drive fairly hard and feel a better quality oil would benifit. what do u think? is it worth it? i was thinking either royal purple or redline.
reverse gear does not have a synchro. This is pretty common on cheaper cars.

I changed the gear lube in my 07 sedan at 100k with mt90. The original fluid looked as good as new...
BoyarisMoorpark,Ca. · Sep 3, 2011#89
Great info. But that only drains 1 3/4 qts. of fluid and there is 4.9 qts. so how do you get the rest out?
yaris0128bellingham WA · Sep 8, 2011#90
Thank you very much for this how to thread sir! Just changed my fluid a few minutes ago and it worked great!
Hersheynortheast · Oct 1, 2011#91
Originally Posted by bronsin ↑
Hmm interesting thing to do. But would it work if you changed the sealing washer? (also unecessary)

Torque wrench complete overkill for something like this however. Manual says something like "Torque the oil filter with a torque wrench. If you dont have one take it to your dealer for proper torque."

Just intimidating the public Im afraid. The bastards. Actually torqueing the OF to their spec will prolly result in it being nearly impossible to remove IME.
This method worked for the '08 YARIS 3 door w/ 5 speed manual . The permanent marker remained for a while . If I remember correctly , reused the washer from the factory . Would get a new one when doing a second change of gear oil .
dan4yarisArizona · Dec 20, 2011#92
Excellent DIY! Just be advised, when you are filling using the vinyl tube with the funnel the oil runs very slow so be patient!

Also, you must use a 24 mm socket, there is some metal on the way when you try to remove the drain bolt. I tried with a wrench it just did not work!

excellent pics to help locate plugs.

drain plug parallel to the drivers tire!

fill plug parallel to the front bumper!
zondakakaAbu Dhabi UAE · Feb 14, 2012#93
where can i find a similar guide for the cvt k410 transmission
IllryionUnited States · Apr 8, 2012#94
Just used this guide - Easy Peasy. Thanks Guys.
CoryMWhite Rock BC · Apr 9, 2012#95
A suggestion to all owners, but specifically while doing this job:

Make sure your vent is clear as well. The transmission has a vent on it to allow for the expansion of the oil/air inside. Otherwise the seals have to deal with the pressure and will eventually fail. These vents often clog, and mine was plugged when I got the car with 38000km on it. A good indicator it is plugged is you will hear a hiss of air as you open the fill plug.

I can't recall exactly where the vent is on these cars. iirc it's just behind the shifter. A little white(?) plastic knob that you twist and wiggle a little to free up any junk.

I'll try to find a picture.

Cheers.
CoryMWhite Rock BC · Apr 9, 2012#96
Pretty sure this is it. Grey metal cap I think.
vent.jpg
ijose 845Orange County, NY · May 16, 2012#97
Hey this is a great diy but I'm having difficulty finding the fill plug is it on the bottom front by the airbox or on the side?
Em_Laval, Canada · May 16, 2012#98
i did it my self about 2 months ago

it's in the front as you look at the engine
ijose 845Orange County, NY · May 16, 2012#99
okay thanks! im doing mine tommorow i just wanted to make sure i got everything mapped out before i do it llol
Hersheynortheast · May 16, 2012#100
You using a torque wrench ? May want to mark one plug as F.P. ( filler plug ) .