YarMatey, I got a full set of shocks and struts from Rockauto.com KYB which is the best aftermarket as they make the OEM Toyota. I didn't look to see if they had the XD but they are hands down the cheapest you'll find them.
The Lift Kit Thread aka The Canadian Commuter mod
215 posts · 194,883 views · page 3 of 5
Replies continued
Maritime, I do recall looking on rockauto but they only had Monroe and they weren’t much cheaper than the OEM ones. But I think I’ll have to order some from somewhere as the xDs aren’t popular where I live at all.
You're right. Monroe only and 258 CAD thats crazy. They have 4 brands for the yaris. My kyb were like 150 CAD.
Yeah I was surprised there weren’t cheaper versions offered for the xD either, maybe it has something to do with them only being a US model from 08-10? Who knows haha.
I don't think the xd was popular in Canada at all, no matter where you live lolOriginally Posted by YarMatey ↑Maritime, I do recall looking on rockauto but they only had Monroe and they weren’t much cheaper than the OEM ones. But I think I’ll have to order some from somewhere as the xDs aren’t popular where I live at all.
I don't know if it was popular in the US, either. I rarely ever see them on the road. I see tons of yarises and XAs, though.
Yeah I don’t think I’ve ever seen one in person here aha. I wonder if a cheap set of coilovers set at their highest setting would provide any lift at all...?
Final installation?
Nope. I'm still not allowed at my apartment. Long story.
This is killing me. I have the other yaris id like to finish before the summer is ovre too but ya know... canadian law is bullshit. Stand up for yourself and get arrested right?
This is killing me. I have the other yaris id like to finish before the summer is ovre too but ya know... canadian law is bullshit. Stand up for yourself and get arrested right?
Thats bad. Law for what?
I should have updates in the next month for both cars. We'll leave it at that.
Whatever happened sounds like a bummer
Lee, you have no idea. Summer is half over and I haven't even been able to wrench for a single minute. It's KILLING me.
Shit deal. Good luck. I cant scrounge the funds for my tires or Id be rocki g a finished ride.
Sent from my moto e5 play using Tapatalk
Sent from my moto e5 play using Tapatalk
Ok so it appears I'll be back to wrenching the week of Aug 5th.
Guarantee I will be spending every waking available minute putting these cars together that week.
Lots of updates coming soon for both lifted and lowered cars!!!
Guarantee I will be spending every waking available minute putting these cars together that week.
Lots of updates coming soon for both lifted and lowered cars!!!
Updates soon!!
I should have the full lift kit installed in a few weeks max.
Just need to finish up the red car first. But as soon as that's done I'll have the time and space to focus on the winter car.
Check back soon!
I should have the full lift kit installed in a few weeks max.
Just need to finish up the red car first. But as soon as that's done I'll have the time and space to focus on the winter car.
Check back soon!
加油~期待新的消息
So I encountered a snag. I went to install the front lift plates last weekend and quickly realized the passenger side driveshaft hits the subframe when pushed down too far. I've thought of a solution that involves lowering the subframe by about 2.5 inches. The lower trans mount will have to be custom made, the subframe spacers will have to be custom made, the sway bar links will need to be lengthened and a custom longer steering shaft will need to be fabricated. I'm picking up the materials for the subframe spacers tomorrow and gonna try to get them welded up this weekend. I'm still aiming for a bolt in lift kit. Although now it will involve many more parts.
Thumbs up for determination and ingenuity! Hope the additional fab goes well. Picture not included in this copy
Does this mean you'll lose 2.5 inches of ground clearance?
Kinda yes kinda no.
The spring perches in the rear stick down pretty far after the angle of the rear axle was pushed down.
I believe the exhaust is the lowest part under the body of the car.
True ground clearance is measured to the lowest part of a vehicle. Usually the differential in say, a 4x4 truck.
So yes, the front of the car will loose 2.5" ground clearance. But, the front subframe won't be as low as the rear spring perches, and only an inch and a half or so lower than the exhaust.
Even truck lift kits lower the front end ground clearance by adding a cross member that loweres the front control arms (IFS setup. All half ton trucks made in the last 10+years)
Either way, with the 2+" of clearance gained with larger tires and the 3.75 inches gained with the lift, minus the 2.5" by lowering the subframe. It should still be 3.5-4" higher than the stock clearance.
Plus the ball joints won't be as stressed.
It's still gonna look cool as f*ck hahah
The spring perches in the rear stick down pretty far after the angle of the rear axle was pushed down.
I believe the exhaust is the lowest part under the body of the car.
True ground clearance is measured to the lowest part of a vehicle. Usually the differential in say, a 4x4 truck.
So yes, the front of the car will loose 2.5" ground clearance. But, the front subframe won't be as low as the rear spring perches, and only an inch and a half or so lower than the exhaust.
Even truck lift kits lower the front end ground clearance by adding a cross member that loweres the front control arms (IFS setup. All half ton trucks made in the last 10+years)
Either way, with the 2+" of clearance gained with larger tires and the 3.75 inches gained with the lift, minus the 2.5" by lowering the subframe. It should still be 3.5-4" higher than the stock clearance.
Plus the ball joints won't be as stressed.
It's still gonna look cool as f*ck hahah
Damm that really more work!! Do the same as alot of people in vw community and cut a half moon piece of steel/ notch just over the axle to clear the frame. That done alot of time in old vw mk1 to mk4
So, another update:
I picked up the metal to fabricate the sub frame spacers. The subframe attaches to the car in 6 spots. But unfortunately I only got enough to make the front 2 and middle 2 spacers, thinking I was gonna have to use something else for the rear 2. Turns out, I can use the same 2.5" square tubing to make the rear 2 spacers, but they just need to be a little longer.
So with the front 2 spacers cut, drilled and mocked up in place, and a jack under the back of the subframe jacked to the right height, I can now see where the subframe will sit. Problem here is the driver side cv shaft us just damn short. The shaft was pulled out from the trans side cup :(
Either gonna have to find a longer drive shaft or lower the engine.
Pros and cons
Longer driveshaft
Pro:
•probably can find one from another year/model pretty easily. Easily replaced if oem size is found
Con:
•doesn't change the angle of the cv shaft which will be significantly more than stock with the 3.75" of lift creating more wear on the joints
•may not find a suitable substitute/necessary custom shafts
Lowering engine/trans
Pro:
•restore or partally restore factory cv shaft angles
•direct replacement cv shafts
•lower center of gravity
Con:
•hoses, lines, wires, exhaust, shifter cables all must be kept in mind or extended where needed
•some sort of custom spacers between the engine/trans and it's mounts.
•will need quite a few specific metric bolts
I'm also having a bit of an issue finding the 2 metric bolts with the right thread pitches and length to fasten the 2 middle subframe spacers to the body.
When I find a good source for hardware I think lowering the engine is the best choice.
Thoughts?
I picked up the metal to fabricate the sub frame spacers. The subframe attaches to the car in 6 spots. But unfortunately I only got enough to make the front 2 and middle 2 spacers, thinking I was gonna have to use something else for the rear 2. Turns out, I can use the same 2.5" square tubing to make the rear 2 spacers, but they just need to be a little longer.
So with the front 2 spacers cut, drilled and mocked up in place, and a jack under the back of the subframe jacked to the right height, I can now see where the subframe will sit. Problem here is the driver side cv shaft us just damn short. The shaft was pulled out from the trans side cup :(
Either gonna have to find a longer drive shaft or lower the engine.
Pros and cons
Longer driveshaft
Pro:
•probably can find one from another year/model pretty easily. Easily replaced if oem size is found
Con:
•doesn't change the angle of the cv shaft which will be significantly more than stock with the 3.75" of lift creating more wear on the joints
•may not find a suitable substitute/necessary custom shafts
Lowering engine/trans
Pro:
•restore or partally restore factory cv shaft angles
•direct replacement cv shafts
•lower center of gravity
Con:
•hoses, lines, wires, exhaust, shifter cables all must be kept in mind or extended where needed
•some sort of custom spacers between the engine/trans and it's mounts.
•will need quite a few specific metric bolts
I'm also having a bit of an issue finding the 2 metric bolts with the right thread pitches and length to fasten the 2 middle subframe spacers to the body.
When I find a good source for hardware I think lowering the engine is the best choice.
Thoughts?
Teaser
Picture not included in this copy
Holding itself up :)
Picture not included in this copy
Picture not included in this copy
Holding itself up :)
Picture not included in this copy
That looks awesome!
My pants feel a little tight all of a sudden
Updates and pics on first page!
Can't wait to get the fenders trimmed and the tires on it!Originally Posted by TiedBassDrummer ↑That looks awesome!
I was able to trade a buddy of mine a couple sets of rims for his old vw corrado g60 rims. They're 15's with a 35 offset. They're pretty rough but I'm gonna hit them with the wire wheel and paint them up again. I'm not concerned too much with mintyness... this is a winter car
So did mine when I sat it on it's own feet for the first time! HahahaOriginally Posted by Leegamer ↑My pants feel a little tight all of a sudden
Found this fun pic. Just Xd springs here.
Picture not included in this copy
Again, this is awesome. It also makes me glad that I live where I just need winter tires in order to be more then fine.
Haha. Tough little unibody.Originally Posted by myfirstyota ↑So did mine when I sat it on it's own feet for the first time! Hahaha
Found this fun pic. Just Xd springs here.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Late 90's - early 2000's Ford ranger shifter boot
Picture not included in this copy
It's new life is a steering shaft boot
Picture not included in this copy
Looks like this crazy idea just may work.
Trans mount spacer
Picture not included in this copy
Engine mount spacer
Picture not included in this copy
All bolted in
Picture not included in this copy
Interesting info:
The only thing that needs to be modified with the engine sitting 2.5" lower is the exhaust. It appears all hoses, lines and shifter cables will work. Edit: the rad hoses actually need to be shortened to prevent kinking.
Where'd that oil filter come from?😳🤷🤮😢
Picture not included in this copy
It's new life is a steering shaft boot
Picture not included in this copy
Looks like this crazy idea just may work.
Trans mount spacer
Picture not included in this copy
Engine mount spacer
Picture not included in this copy
All bolted in
Picture not included in this copy
Interesting info:
The only thing that needs to be modified with the engine sitting 2.5" lower is the exhaust. It appears all hoses, lines and shifter cables will work. Edit: the rad hoses actually need to be shortened to prevent kinking.
Where'd that oil filter come from?😳🤷🤮😢
Rulz! Very inventive/clever use of the shift boot. 👍
My only concern is it's proximity to the exhaust. I'm gonna make up a small metal heat shield and use an existing bolt on the firewall to secure it.
So as I was trying to put the car back together a couple days ago I noticed the driver side ball joint was a bit sloppy. So I ordered a moog lower control arm from rock auto.
Last night I went to install it. I knew the front LCA bolt wasn't gonna be easy. 12 years of salt and rust. Probably never been removed before. As I started working the bolt back and forth with what little pb blaster i could get on it I thought 'really hope this one doesn't snap like the one on the red car's subframe' (I used the xd subframe as the bolts came out somewhat easy, and was in a bit better shape)
After about an hour working the bolt in and out, it was almost completely unthreaded. Then the backing nut broke loose. FAAK!! And of course it's burried within the subframe. There's no access to the backing nut without cutting the subframe.
Now I have to remove the subframe, again, cut the subframe apart to get at the backing nut, cut the bolt out and weld a patch plate back in. So glad I bought the welder at this point or I'd be screwed.
Last night I went to install it. I knew the front LCA bolt wasn't gonna be easy. 12 years of salt and rust. Probably never been removed before. As I started working the bolt back and forth with what little pb blaster i could get on it I thought 'really hope this one doesn't snap like the one on the red car's subframe' (I used the xd subframe as the bolts came out somewhat easy, and was in a bit better shape)
After about an hour working the bolt in and out, it was almost completely unthreaded. Then the backing nut broke loose. FAAK!! And of course it's burried within the subframe. There's no access to the backing nut without cutting the subframe.
Now I have to remove the subframe, again, cut the subframe apart to get at the backing nut, cut the bolt out and weld a patch plate back in. So glad I bought the welder at this point or I'd be screwed.
Oh, man. That blows! Sorry to hear. But, nothing catastrophic, just a setback that you have the skill to overcome. This would spell the end - or a massive cash expenditure - for some. I know...not much consolation.
So true. Without the skill and tools I have, it could be a big expenditure. Or a wild goose chase tracking down another subframe...
So this weekend I'm tackling the control arm bolts. I don't think anyone has posted the process of fixing this b.s.
To make life easy (and because I have already had the subframe removed and greased all the fasteners) I just removed it from the car. I also recommend that you remove the rack and sway bar. The sway bar is kinda in your way. And because the tierods are above the sway bar, you can't just swing the sway bar up out of your way.
This is a great time to inspect your sway bar bushings for wear and replace if needed. They are only accessible with the subframe removed.
Picture not included in this copy
Cut the frame open with a grinder and a cut off wheel.
Inside you'll find the square nut and the dinky cage that holds it in place.
Picture not included in this copy
I ended up cutting the lower control arm off it's mounts to give me room to work. For whatever reason, after removing the square nut, I still couldn't pull the bolt out of the control arm. I tried a punch and a bfh but it wouldn't budge. I tried using the gun in reverse while prying on the bolt with a prybar, still no bueno. I ended up cutting the bolt with a sawzall
Picture not included in this copy
I used the control arm bolt to keep the nut in place while welding it to the sub frame
Picture not included in this copy
Welded it up
Picture not included in this copy
And cut a patch plate. The section of subframe that you cut out has a curvature to clearance the LCA bolt. I massaged some of the remaining metal of the subframe for the patch plate to sit nice and flat for welding.
Picture not included in this copy
Welded, primed and ready for paint.
Picture not included in this copy
With the inside nut welded in place, and lots of grease and oil spray (rust proofing) this should never be a problem again.
To make life easy (and because I have already had the subframe removed and greased all the fasteners) I just removed it from the car. I also recommend that you remove the rack and sway bar. The sway bar is kinda in your way. And because the tierods are above the sway bar, you can't just swing the sway bar up out of your way.
This is a great time to inspect your sway bar bushings for wear and replace if needed. They are only accessible with the subframe removed.
Picture not included in this copy
Cut the frame open with a grinder and a cut off wheel.
Inside you'll find the square nut and the dinky cage that holds it in place.
Picture not included in this copy
I ended up cutting the lower control arm off it's mounts to give me room to work. For whatever reason, after removing the square nut, I still couldn't pull the bolt out of the control arm. I tried a punch and a bfh but it wouldn't budge. I tried using the gun in reverse while prying on the bolt with a prybar, still no bueno. I ended up cutting the bolt with a sawzall
Picture not included in this copy
I used the control arm bolt to keep the nut in place while welding it to the sub frame
Picture not included in this copy
Welded it up
Picture not included in this copy
And cut a patch plate. The section of subframe that you cut out has a curvature to clearance the LCA bolt. I massaged some of the remaining metal of the subframe for the patch plate to sit nice and flat for welding.
Picture not included in this copy
Welded, primed and ready for paint.
Picture not included in this copy
With the inside nut welded in place, and lots of grease and oil spray (rust proofing) this should never be a problem again.
Got the "new" feet all cleaned up
Picture not included in this copy
Picture not included in this copy
Another thread I just discovered, which is making me think about lifting my own car too 😁 Following!
Remember the old days when responses were something like;Originally Posted by eTiMaGo ↑Another thread I just discovered, which is making me think about lifting my own car too 😁 Following!
"Nice ride. Now...
- drop it!
- slam it!
- take care of that wheel gap!
- get rid of the 4x4 look!"
Changing times indeed. Just like the old quest for 18+ inch wheels.
Pretty sure I seen a lifted scion frs tonight. It definitely had larger tires on it. Also, my buddy showed me a video on YouTube of a mk4 jetta that the owner lifted and added 215/75/15 tires. Same size I'm going for.
I actually blame that one fast and Furious movie where they ruggedized the Charger, WRX, etc...Originally Posted by WeeYari ↑Remember the old days when responses were something like;
"Nice ride. Now...
- drop it!
- slam it!
- take care of that wheel gap!
- get rid of the 4x4 look!"
Changing times indeed. Just like the old quest for 18+ inch wheels.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
I know it's still hanging, but can't wait to see side shots when she hits the ground. So cool! 👍
Only reason it's on jacks was so I could take the tires off to make room to work.
It's basically driveable but needs the exhaust realigned to jive with the new engine height and an alignment. Haven't extended the sway bar links yet either. Also need to get the new, bigger tires and make sure they fit. I may still have to make room in the rear. But technically you could bomb around a field with it as is, although I bet it would be loud!
Priced out some bfg ko2's today. May order them tomorrow. But KAL tire says probably 2-3 weeks to get here. Coming from B.C. they said.
Im taking this time to rewire some of my accessories. As things were added, it got messy. I'm hoping to have the car ready for the exhaust shop and alignment by halloween
It's basically driveable but needs the exhaust realigned to jive with the new engine height and an alignment. Haven't extended the sway bar links yet either. Also need to get the new, bigger tires and make sure they fit. I may still have to make room in the rear. But technically you could bomb around a field with it as is, although I bet it would be loud!
Priced out some bfg ko2's today. May order them tomorrow. But KAL tire says probably 2-3 weeks to get here. Coming from B.C. they said.
Im taking this time to rewire some of my accessories. As things were added, it got messy. I'm hoping to have the car ready for the exhaust shop and alignment by halloween