MaritimeOriginal postWoodstock nb · Jan 17, 2019#1Hello folks, Been lurking for a bit, this is a great Yaris resource. I decided that I want to do something funky with my 2008 5 door hatch M/T. I've always wanted a Baja VW but will never have the $$ for one so I decided I want to make my Yaris a Baja offroader. I see others have done it before me but not a lot. I know our little beaters are popular in the EU and UK and have found a lift kit out of Russia for 172 USD. I plan to use that and put a set of 27x8.5R14 general grabber ATX tires on her. A roof rack and basket with a hitch and I should be able to take the little car fishing and to some out of the way mountain bike trail heads. If I can scrap together the $$ the next phase will be the 2ZR swap with an LSD. I live in Eastern Canada, Woodstock NB and the added clearance and AT tires will also mean easier time getting to and from work in the snow. 12" coming this weekend to add to the 2' we have already. The project will be mid summer when the current set of tires get low enough I need to change them, although the lift may happen sooner for winter clearance, I have winter tires on steel 14". Car has 358K KM's on it, just got a new set of KYB struts and shocks front and back, should have got the lift when I did those in hind site.
Summer Wheels I'll use with the Grabbers:
Picture not included in this copy
tires:
Picture not included in this copy
Lift Kit which will give me 1" front and 1.5" back:
Picture not included in this copy
I know 2-3 other members have made their own lifts but I think that will be a breeze to install and looks like it will fit and work well.
Cheers for now.
Maritime
Replies 173
myfirstyotaToronto Canada · Jan 17, 2019#2Any year of scion xd springs/struts will bolt right in. I don't know the exact height increase but its enough to 'almost' 205/65/15 tires with slight inner fender liner rubbing. I fixed that by installing the xd fender liners with the springs as they are slightly larger and kinda fit. Some trimming will be required. To get those 27's to fit, I imagine you'll need much more clearance. Ready your cut off wheel and bfh. Good thing is your car is Hugh mileage and you shouldn't feel too bad about making room lol
Also account for fuel economy. My car is a bit of a pig now with these big winters fitted. About 6.5l/100 average on stock size tires. Closer to 8 now with the bigger shoes.
myfirstyotaToronto Canada · Jan 17, 2019#3Not even easy to find a scrapped xd here in toronto. Theyre just not that popular. I got lucky with the high mileage donor I found. I do suggest to keep an eye open for one if you're thinking of the 2zr swap. You'll get everything you need for your swap ( less the '08 ecu) right down to the hoses and harness brackets. Plus bigger brakes and all suspension components (which is really only useful if you plan to raise the car slightly)
MaritimeThread starterWoodstock nb · Jan 17, 2019#4oh, also if I hadn't just put a full set of KYB struts&shocks plus links etc I would just buy the XD. I didn't think of the Baja thing until a week or so after I did that LOL.
MaritimeThread starterWoodstock nb · Jan 17, 2019#5 Originally Posted by
myfirstyota ↑ Not even easy to find a scrapped xd here in toronto. Theyre just not that popular. I got lucky with the high mileage donor I found. I do suggest to keep an eye open for one if you're thinking of the 2zr swap. You'll get everything you need for your swap ( less the '08 ecu) right down to the hoses and harness brackets. Plus bigger brakes and all suspension components (which is really only useful if you plan to raise the car slightly)
Yeah, that would be great but I've never seen an XD on the road around here let alone in the yards. My plan would be a low miles corolla then Ebay for the rest. The swap threads here a really good. I've done a civic back in the day but haven't even thought about the yaris until recently it is starting to grind in 2&4 and so may need transmission work. If I got to pull the engine for that, might as well swap it cause 358K is getting up there even for a Toyota. It's still original clutch too.
LeegamerAshland, VA · Jan 17, 2019#6Can you share the link for the lift kit? I'm pretty curious.
MaritimeThread starterWoodstock nb · Jan 17, 2019#7MaritimeThread starterWoodstock nb · Jan 17, 2019#8also looking at this. its modular so I can swap it between the yaris and the CRV depending on needs:
Picture not included in this copy
LeegamerAshland, VA · Jan 17, 2019#9Cool, looking forward to seeing this project come together.
If you want to make it really exciting you could try to rig up some AWD.
MaritimeThread starterWoodstock nb · Jan 17, 2019#10 Originally Posted by
Leegamer ↑ Cool, looking forward to seeing this project come together.
If you want to make it really exciting you could try to rig up some AWD.
Ha, that would be rad but way out of budget. I'll be lucky of I can manage a 2ZR swap and afford an LSD when the original motor finally bites the bullet. the lift, tires and rack are all budget friendly.
myfirstyotaToronto Canada · Jan 17, 2019#11Yea an LSD is about $1600 cad for a quaife. Plus install. Its not a budget friendly mod... But sometime you gotta say f-the budget lol
LeegamerAshland, VA · Jan 17, 2019#12 Originally Posted by
Maritime ↑ Ha, that would be rad but way out of budget. I'll be lucky of I can manage a 2ZR swap and afford an LSD when the original motor finally bites the bullet. the lift, tires and rack are all budget friendly.
Fair enough! Still going to be awesome and probably quite capable
MaritimeThread starterWoodstock nb · Jan 17, 2019#13 Originally Posted by
myfirstyota ↑ Yea an LSD is about $1600 cad for a quaife. Plus install. Its not a budget friendly mod... But sometime you gotta say f-the budget lol
Ha yep. If it comes to swap time, 1600 + an engine will be cheaper than a new car and I can do the install. I play with cars and bikes all the time so labor is non-issue.
On the clearance front. I currently run 185/65 14 general altimax on the summer wheels. Got them at Tirerack and specs are 23.5" diameter, 7.4" at the widest with a 5.4" tread width. Weigh 16 lbs. the Grabbers are 26.9" Diam, 8.6" W and 29lbs. that 13 lbs of rotational mass will suck the MPG and the acceleration, as well as braking I bet. It's not a hot rod now but it will take some adjustments to driving style I think. I'll need to get 1.7" of clearance to fit those tires so that lift kit may not work. I was looking at a few different tire options and may have messed up sizes in my head. Need to think a bit more on the lifting.
MaritimeThread starterWoodstock nb · Jan 17, 2019#14I'm not looking to rock crawl and go mudding. logging roads and fields etc will be doable, especially because the Yaris is so light. I think when looking for tires I was considering DOT legal side by side tires in a 14" that were 25-26" but decided against those.
myfirstyotaToronto Canada · Jan 17, 2019#15 Originally Posted by
Maritime ↑ Ha yep. If it comes to swap time, 1600 + an engine will be cheaper than a new car and I can do the install. I play with cars and bikes all the time so labor is non-issue.
On the clearance front. I currently run 185/65 14 general altimax on the summer wheels. Got them at Tirerack and specs are 23.5" diameter, 7.4" at the widest with a 5.4" tread width. Weigh 16 lbs. the Grabbers are 26.9" Diam, 8.6" W and 29lbs. that 13 lbs of rotational mass will suck the MPG and the acceleration, as well as braking I bet. It's not a hot rod now but it will take some adjustments to driving style I think. I'll need to get 1.7" of clearance to fit those tires so that lift kit may not work. I was looking at a few different tire options and may have messed up sizes in my head. Need to think a bit more on the lifting.
You'd be surprised on the braking front. I honestly didnt notice much difference on my 205/65/15. The Yaris brakes are pretty good right from factory. Nothing like the many domestic vehicles I've had. I swear they built those brakes just to pass a dot standards.
myfirstyotaToronto Canada · Jan 17, 2019#16 Originally Posted by
Maritime ↑ I'm not looking to rock crawl and go mudding. logging roads and fields etc will be doable, especially because the Yaris is so light. I think when looking for tires I was considering DOT legal side by side tires in a 14" that were 25-26" but decided against those.
Serious offroading is better left to anything but a Yaris. But like most of us wanting to lift our cars, I'm sure your just looking for more ground cleaance. Personally the reason I want to lift my car is so I don't have to shovel he snow berm left by the plow at 4am to go to work and not having to worry about destroying the front number on said berm.
Also I'd imagine side by side tires would pretty loud rollin down those nifty 110km/h hiways got down home.
MaritimeThread starterWoodstock nb · Jan 17, 2019#17 Originally Posted by
myfirstyota ↑ You'd be surprised on the braking front. I honestly didnt notice much difference on my 205/65/15. The Yaris brakes are pretty good right from factory. Nothing like the many domestic vehicles I've had. I swear they built those brakes just to pass a dot standards.
good to know. I never have had an issue either. The only thing I find is going back and forth between Honda and Toyota which I have done for 20+ years having one of each in the stable. Honda brakes start immediately, Toyota start half way through the travel and that catches me sometimes. I either hit them too hard and stop short or realize I'm not pushing enough and have to hit em harder LOL. and it's the same on the Yaris, Rav4, T100, Tundra pedal moves half way before brakes start working. CRV Civic, accord, pilot brakes start with just a slight pressure. Not sure if that can be changed but it's something i've noticed. Both brands brake very well. GMC/Ford/Crysler you push and hope to hell the car stops eventually LOL.
MaritimeThread starterWoodstock nb · Jan 17, 2019#18 Originally Posted by
myfirstyota ↑ Serious offroading is better left to anything but a Yaris. But like most of us wanting to lift our cars, I'm sure your just looking for more ground cleaance. Personally the reason I want to lift my car is so I don't have to shovel he snow berm left by the plow at 4am to go to work and not having to worry about destroying the front number on said berm.
Also I'd imagine side by side tires would pretty loud rollin down those nifty 110km/h hiways got down home.
Yep, exactly the reason, my drive is a hill and getting the car up to the house so I can then blow out the drive is not easy or impossible if there is more than 2-3" of snow, front plows in and lifts the tires and then you spin away. even an inch more would help. I have a fused ankle and can't walk well on hills when dry, add snow and ice and it's dangerous. I want it to still drive ok on the Highways but be better on the crap secondary roads I commute on and also get me to some good fishing and riding spots. I can get there now, but I drag the bumper and possibly the exhaust and don't want that.
MaritimeThread starterWoodstock nb · Jan 17, 2019#19myfirstyotaToronto Canada · Jan 17, 2019#20I've actually dropped some sketches off at a local metal supplier. They're gonna cut some pieces out of 1/4" plate with a waterjet for me. I'm essentially trying to fabricate spring spacers for the rear. But the kicker is I cut the rear OEM spring perches off of my donor xd axle. They will sit on top of my custom made spring spacers pushing the shock mount up as well. 3-4" of lift on stock springs and shocks is the plan. There won't be any extra suspension travel but like we said. . this isn't for serious off roading. The front will basically a copy of ctscotts crashy.
myfirstyotaToronto Canada · Jan 17, 2019#21 Originally Posted by
Maritime ↑
I had one on my old slammed vw. Worth its weight in gold.
MaritimeThread starterWoodstock nb · Jan 17, 2019#22And these are cheap enough 45 USD on amazon and would work to hide the sins after the BFH and cutting.
Picture not included in this copy
MaritimeThread starterWoodstock nb · Jan 17, 2019#23 Originally Posted by
myfirstyota ↑ I've actually dropped some sketches off at a local metal supplier. They're gonna cut some pieces out of 1/4" plate with a waterjet for me. I'm essentially trying to fabricate spring spacers for the rear. But the kicker is I cut the rear OEM spring perches off of my donor xd axle. They will sit on top of my custom made spring spacers pushing the shock mount up as well. 3-4" of lift on stock springs and shocks is the plan. There won't be any extra suspension travel but like we said. . this isn't for serious off roading. The front will basically a copy of ctscotts crashy.
Nice. that sounds great.
MaritimeThread starterWoodstock nb · Jan 17, 2019#24 Originally Posted by
myfirstyota ↑ I had one on my old slammed vw. Worth its weight in gold.
I could see it being good for both a lifted soft roader or a slammed hot hatch for sure.
myfirstyotaToronto Canada · Jan 17, 2019#25 Originally Posted by
Maritime ↑ And these are cheap enough 45 USD on amazon and would work to hide the sins after the BFH and cutting.
Picture not included in this copy
If you get these installed before I do keep us posted as to fitment
06YarisRSFredericton, New Brunswick, Canada · Jan 17, 2019#26 Originally Posted by
Maritime ↑ Yeah, that would be great but I've never seen an XD on the road around here let alone in the yards.
Yup, I tried practically every salvage yard in the province and Nova Scotia. Searched kijiji and posted on NBAutoEnthusiasts. I ended up getting my engine from Ohio via Ebay. Got the harness, ecu etc from eBay too and my mount from an online Toyota dealer.
Here's a listing for a '14 Corolla being parted out in Hampton:
https://www.kijiji.ca/v-auto-body-pa...ationFlag=true MaritimeThread starterWoodstock nb · Jan 17, 2019#27 Originally Posted by
06YarisRS ↑ Yup, I tried every salvage yard in the province and Nova Scotia. Searched kijiji and posted on NBAutoEnthusiasts. I ended up getting my engine from Ohio via Ebay.
Here's a listing for a '14 Corolla being parted out from Saint John:
https://www.kijiji.ca/v-auto-body-pa...ationFlag=true
Thanks, I have that saved already. I saw you were a fellow NB'r and was going to hit you up for advice when swap time came. I won't be doing that until my engine dies enough and that could take 100K more based on past history with Toyota. or if I come accross some extra $$
myfirstyotaToronto Canada · Jan 17, 2019#28This thread is full of NB'rs lol
MaritimeThread starterWoodstock nb · Jan 17, 2019#29 Originally Posted by
myfirstyota ↑ If you get these installed before I do keep us posted as to fitment
Will do, there are 2-3 styles on there and I'm going to get the ones that will fit best after clearancing the wells.
MaritimeThread starterWoodstock nb · Jan 17, 2019#30 Originally Posted by
myfirstyota ↑ This thread is full of NB'rs lol
So you are an X-pat maritimer too eh?
myfirstyotaToronto Canada · Jan 17, 2019#31Born in Moncton! Fam about 45 min outside of Bathurst
MaritimeThread starterWoodstock nb · Jan 17, 2019#32 Originally Posted by
myfirstyota ↑ Born in Moncton! Fam about 45 min outside of Bathurst
Nice, I'm from SJ originally but lived in MTN 2 times for 5-6 years each. Now up here in gods country Carlton County.
06YarisRSFredericton, New Brunswick, Canada · Jan 17, 2019#33 Originally Posted by
Maritime ↑ Thanks, I have that saved already. I saw you were a fellow NB'r and was going to hit you up for advice when swap time came. I won't be doing that until my engine dies enough and that could take 100K more based on past history with Toyota. or if I come accross some extra $$
Right on. Yeah, the longevity of the 1nz is legendary which is unforunate as I have one for sale with just over 180K on it. 😆 Best of luck with your project. It sounds really cool. 👍
LeegamerAshland, VA · Jan 17, 2019#34Man, this project is gonna be epic. Can't wait to see this come together.
How about headers sticking out of the hood? lol
myfirstyotaToronto Canada · Jan 17, 2019#35 Originally Posted by
Leegamer ↑ Man, this project is gonna be epic. Can't wait to see this come together.
How about headers sticking out of the hood? lol
Header. No one has figured out how to stog a hemi or ls into a Yaris yet as far as I know lol
LeegamerAshland, VA · Jan 17, 2019#36 Originally Posted by
myfirstyota ↑ Header. No one has figured out how to stog a hemi or ls into a Yaris yet as far as I know lol
Lol, truth!
myfirstyotaToronto Canada · Jan 17, 2019#37Here is the tire size I'm running on the left. Oem 15" steel rims and the xd springs. I had to remove the rear mud guards and there is basically no extra clearance to the rear bumber. Its safe to say, on xd springs (estimated 1-2" lift), this is as large of a tire that will fit a 2 door hatchback gen2 without major modifications, ie: cuttin stuff..
On the right is my hopeful tire size with the 3-4" lift and most likely a reason to get out the cutoff wheel.
Picture not included in this copy
Might need some horribly offset rims for those massive shoes lol
MaritimeThread starterWoodstock nb · Jan 18, 2019#38 Originally Posted by
myfirstyota ↑ Here is the tire size I'm running on the right. Oem 15" steel rims and the xd springs. I had to remove the rear mud guards and there is basically no extra clearance to the rear bumber. Its safe to say, on xd springs (estimated 1-2" lift), this is as large of a tire that will fit a 2 door hatchback gen2 without major modifications, ie: cuttin stuff..
On the left is my hopeful tire size with the 3-4" lift and most likely a reason to get out the cutoff wheel.
Picture not included in this copy
Might need some horribly offset rims for those massive shoes lol
Did you get left and right backwards in the description LOL? I see the difference there is a lot. I was doing more looking on line and discovered the SX4 has the same style strut as the Yaris and there are 2" lifts for them that look the same as the yaris one I found. I'm trying to find out if the thread size and pitch are the same on their struts as the Yaris, if so the possibilities went way up for sources. Also the kits are basically a bolt extender and a second mount top stacked on top of each other, I chucked my old strut mounts at the local scrap yard but could go back and get them or another set then I just need the bolt extenders and may be able to source or have those machined, costs go way down and they would be easy to install.
MaritimeThread starterWoodstock nb · Jan 18, 2019#39Here is one of the SX4 kits installed, it's the same kit as the Ebay one I found basically.
Picture not included in this copy
I think if I get some used mounts (wish I kept mine) and figure out the bolt extension I can lift the front the same way cheap.
MaritimeThread starterWoodstock nb · Jan 18, 2019#40I think I am going to stop at the junk yard and see if my old struts and mounts are still in the junk pile. If so I am grabbing the mounts back.
MaritimeThread starterWoodstock nb · Jan 18, 2019#41Found a review on an SX4 forum about the Tema4x4 lifts and they look good. I'm going to see if I can replicate it but if I can't I will likey buy it. Between that kit, clearancing the wheel wells, and maybe some spring helpers to reduce sag, wheel spacers if needed I should be able to get the lift I want.
myfirstyotaToronto Canada · Jan 18, 2019#42Yea I didn't throw out any of my strut bushing. Dealer wants $140 a piece for those chunks of rubber.
Love the sx4 idea, if your threads match up you're golden.
I'm assuming you seen how ctscott lifted his crashy? This is how I'm doing it, I believe it would be stronger and cheaper than shock extenders in the top side. But I'm no engineer.
And yea, I can swap an engine, but apparently don't know my left from my right lol
MaritimeThread starterWoodstock nb · Jan 18, 2019#43I Did the KYB quick struts cause one of my front springs was broken and I couldn't get springs alone. Decided to go home for lunch, stopped and found one of my tossed struts with the mount, the other the mount fell off and they were buried in snow so may need to wait till spring to get the other. Anyway I can now look at the strut and come up with a lift to copy the Russian or SX4 design.
myfirstyotaToronto Canada · Jan 20, 2019#44So we finally got some proper snow in the golden horseshoe this weekend. I've always loved driving in bad weather. Don't ask me why, I just do. So when I seen that st. Catherine's was expecting between 15-30cm (6-12") I hadded out.
Picture not included in this copy
Picture not included in this copy
This car is a tank in the snow with the mild lift and over sized tires. The drifts were up to 12-14" is some spots. Even when stopping in the drifts the car just pulled itself out like nothing. The tires aren't anything special. Actually some of the cheapest money can buy. Lil loud on the pavement, but grab pretty good in the hard pack and loose fluf. Antares is the brand. $500 on the rims.
MaritimeThread starterWoodstock nb · Jan 20, 2019#45Nice. We're going to end up with 2' by end of tomorrow. I need my lift done yesterday. Big reason to do it is just what you wrote. Even drifts wont stop you if you have the ground clearance.
I brain stormed a bit and think I have a way to make the Russia lift myself with my old struts donating parts. If I get a chance today to work on it and it works Ill post up pics and description.
Sent from my moto e5 play using Tapatalk
MaritimeThread starterWoodstock nb · Jan 21, 2019#46Didn't get a chance to work on the lift. The plan I have is to cut off the ends of the old strut shafts, then use a deep bolt, like a lug to attach it to the new strut tops and extend them, use a second set of mounts and stack them just like the Ebay kits. I just need to research how much thread contact will be enough to be strong enough, I may need to have someone weld it. I have the M12x1.25 lugs and they have about 1" of thread in them so just the threads would be .5" engagement on each half of the extension. I have an engineer buddy I can ask about it once I build it. From my measurements though I'll be able to get as much as 2" of strut extension from that setup. If the engineer says the 1", .5" each isn't enough strength the lug has 1.75" in total length, just the .75" has no threads so I could have the stud welded in there and give more thread engagement on the lower shaft if needed. The Russian kit doen't look like it has much more than .5" of thread on it.
MaritimeThread starterWoodstock nb · Jan 24, 2019#47Dammit, went to do some on the lift idea and broke my grinder. Need to go pick up a new one, likely on the weekend when I can get to harbor freight in Maine. Progress will continue then.
myfirstyotaToronto Canada · Jan 24, 2019#48Keep us posted
Side note: the metal place called me the other day. My pieces for my rear spacers are ready for pick up. Hopefully I can get there before they close in the next week.
MaritimeThread starterWoodstock nb · Jan 24, 2019#49 Originally Posted by
myfirstyota ↑ Keep us posted
Side note: the metal place called me the other day. My pieces for my rear spacers are ready for pick up. Hopefully I can get there before they close in the next week.
good luck, I hate trying to make it to a shop/store that closes early. I may be able to use my dremel for part of the idea and if so I'll get some progress pics up. Right now there is nothing to see LOL.
myfirstyotaToronto Canada · Jan 24, 2019#50Dremel... The tool sent from god. Hahaha
I use mine constantly