Yarisworld Archive

Baja Yaris

174 posts · 165,443 views · page 3 of 4

Replies continued

MaritimeThread starterWoodstock nb · Mar 5, 2019#101
So this is done, work can now resume on the Yaris:
Picture not included in this copy
LeegamerAshland, VA · Mar 5, 2019#102
Looks great! I love that tub, we're going with something similar in our bathroom and I think I bought the same faucet, lol.
MaritimeThread starterWoodstock nb · Mar 5, 2019#103
Originally Posted by Leegamer ↑
Looks great! I love that tub, we're going with something similar in our bathroom and I think I bought the same faucet, lol.
It's nice, ours was a package deal from Costco including faucet, although I got it for pennies on the dollar from a freight claim. I hope your's has better instructions. there was no measurements in the drawing for mine and the drain placement was tough. It got buggered up and that's why this took me a few days longer, I had to spend a day running back and forth to the plumbing dept to test fittings until I got the drain pipe shaped to fix the mis-measurement. Was so glad I didn't have to bust open the floor to fix it. The curve of the tub made figuring out the distance from faucet to drain very hard to do.

Good luck on your job.
MaritimeThread starterWoodstock nb · Mar 18, 2019#104
So, I got to do some work on the car! Installed the Thule roof rack rails. Went ok, had a couple of the riv-nuts spin on me but sorted them. It's a little noisy but not real bad. looking forward to throwing the basket on when I get it ordered. Hoping some night this week to get the lift in, I need a good 2-3 hours un-interrupted for that though. Depends on weather as one of the decks decided to come off the house on Friday so I need to address that as soon as I can get to it, need the 5' of snow around it to melt down some.

3 attachments not included in this copy

MaritimeThread starterWoodstock nb · Mar 18, 2019#105
I'll get a pic today outside with the back one on too.
Tskm2Montreal · Mar 18, 2019#106
That a nice idea the axle lift plate. I build similar couple years ago for my jetta mk2 bit for lower it.
MaritimeThread starterWoodstock nb · Mar 18, 2019#107
At work.

1 attachment not included in this copy

MaritimeThread starterWoodstock nb · Mar 18, 2019#108
Also Stopped into the local shop I used when I need inspections and other stuff I can't do at home and they can get the Grabber ATX for the same price as the best deal I can find online so I can just call them, order and bring the wheels in for install. Love that.
Tskm2Montreal · Mar 18, 2019#109
What is the tread size of strut nut exactly? Did you cut only the tread section on your old strut and treaded an half into wheel nut?
MaritimeThread starterWoodstock nb · Mar 18, 2019#110
M12*1.25 I think. I chopped the threaded end of old struts and it threads 50% on the lug nut so shoild be plenty of engagement

Sent from my moto e5 play using Tapatalk
MaritimeThread starterWoodstock nb · Mar 19, 2019#112
Originally Posted by Tskm2 ↑
http://clubsx4.com/forum/showthread.php?t=8357&page=3

Kanook lift. That wath sx4 owner build. Same strut as yaris. And they built strong and dont put to much stress on shock stud.

Click on first image they have alot of picture on that flickr account
That's what I copied from. Just didn't have the ability to weld so came up with a mechanical method.
myfirstyotaToronto Canada · Mar 20, 2019#113
I don't have the ability to weld...i just own a welder lol
MaritimeThread starterWoodstock nb · Mar 25, 2019#114
So, first off, no pics yet, not sure what happened I was snapping them but they are not on my phone?? anyway Sunday was a day of successes and failures. The cheapo coil spacers were a success, they required me to compress the springs off the car, then zip tie em, then put them in on top of the spacer then cut the zip ties. That worked and gave me 1.5" at the wheel wells. All I had to do was trim the inner bit out as the springs were a smaller circle. but they fit in the perches perfectly and the outer ring holds everything in. Move on to the front, here's the fail. I installed the first one and it worked well, everything tightened up and it gave me about 1.4" increase in height at the fender. Wohoo. so on the the last corner, it is the same, exact same as the other but it didn't work, the strut bolt kept poking way farther up that it should and it was like the lift was compressing itself. but I put the rubber ring in a vise and could get it to budge at all. No matter how many times I took it out and looked, put it back in it just wouldn't work. So now I need to figure out a plan b. I did get a ride down the road when I thought it was tight and the added height was great, add the bigger tires and it should be awesome.
06YarisRSFredericton, New Brunswick, Canada · Mar 25, 2019#115
Best of luck getting that last bit straightened out. It will look and work great in the end, I'm sure!

Looking forward to the pics when it's done. 👍
MaritimeThread starterWoodstock nb · Mar 25, 2019#116
Originally Posted by 06YarisRS ↑
Best of luck getting that last bit straightened out. It will look and work great in the end, I'm sure!

Looking forward to the pics when it's done. 👍
Thanks, I just don't get why one side worked and one didn't. It's been bugging me all day LOL. I am going to see if I can find something else at the hardware store to put in the 1.5" space I had the rubber ring, I can't see that compressing but it must be. But why only one of the 2 as they are identical??? That is the puzzling bit.
YarMateyCalgary, AB, CANADA · Mar 25, 2019#117
That’s definitely weird one side isn’t working the same as the other. So you have pictures of the assembly prior to it being installed in the car? Maybe something is just slightly different from one assembly to the other?
MaritimeThread starterWoodstock nb · Mar 25, 2019#118
Here it is basically a dense rubber ring with a strut top and extension on the bolt. I cut the rings from a boat trailer roller and tried to compress in my vice and it wouldn't budge.

1 attachment not included in this copy

MaritimeThread starterWoodstock nb · Mar 25, 2019#119
I know the rubber mount on the top compressed some, but that ring shouldn't at all
MaritimeThread starterWoodstock nb · Mar 25, 2019#120
SO the only thing I can think of, is the top rubber strut normally sits right on the bearing and the second bit is missing that bearing and maybe on the one side it compressed more than the other and I need to drill out and put a bearing on that piece to fill the hollow under the topper? It won't fit over the lug nut I used unless I drill it out.
MaritimeThread starterWoodstock nb · Mar 25, 2019#121
Here is rear.
MaritimeThread starterWoodstock nb · Mar 25, 2019#122
Here is the rear.Picture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copy

Sent from my moto e5 play using Tapatalk
YarMateyCalgary, AB, CANADA · Mar 25, 2019#123
Yeah I’m not sure why the opposite side seems to be compressing once the weight of the car is installed on it. I would keep an eye on the rubber from time to time so check it’s condition though. I bought spring spacers that go inbetween the coils once and the first time I lowered the weight of the car onto them they started to split from the inside out.

Looks like you got some good lift going on though!
myfirstyotaToronto Canada · Mar 25, 2019#124
This is half the fun. Try, fail, try again!
MaritimeThread starterWoodstock nb · Mar 25, 2019#125
Pretty sure Ingot it figured. One of the kyb strut tops was a little softer on the side that compressed more. I need something to take u the air under the domed part and reinstall

Sent from my moto e5 play using Tapatalk
Tskm2Montreal · Mar 26, 2019#126
Which spacer exactly you buy for the rear? If its not a secret!
MaritimeThread starterWoodstock nb · Mar 26, 2019#127
No secret but they were used and only set but prob can find new. Ill find thenlink and post if I can

Sent from my moto e5 play using Tapatalk
MaritimeThread starterWoodstock nb · Mar 26, 2019#128
Daystar KC09103BK Comfort Ride 1.5-Inch Front Coil Spring Spacer Kit - 2 Piece

[https://images-na]


They aren't perfect but I paid 20 CAD shipped to the house so if they didnt work I wasnt out much.

Sent from my moto e5 play using Tapatalk
CrankyOldManWest Michigan · Mar 27, 2019#129
Your linky no worky. =D
MaritimeThread starterWoodstock nb · Mar 27, 2019#130
Originally Posted by CrankyOldMan ↑
Your linky no worky. =D
Sorry, was on my phone and the copy paste must have buggered.

These:

https://www.amazon.com/Daystar-Level...y&sr=8-1-fkmr0

I only paid 20 shipped CAD for the set I got, were supposedly used but were NIB when they arrived. had never been installed.
MaritimeThread starterWoodstock nb · Mar 27, 2019#131
Thanks to Myfirsttoyota for the site I have the tire comparison below. the Grabber ATX are listed as 26.9" but .1 of an " is not enough to matter. I need to measure my clearance and may need to mod my lift some more. I did math but I think I got the wrong measurement on the small tire the first time maybe.

1 attachment not included in this copy

myfirstyotaToronto Canada · Mar 27, 2019#132
I like the beefy sidewall on the 14" rim!
Gonna feel like you're driving on beach balls!! Lol
MaritimeThread starterWoodstock nb · Mar 27, 2019#133
Originally Posted by myfirstyota ↑
I like the beefy sidewall on the 14" rim!
Gonna feel like you're driving on beach balls!! Lol
When aired down for sure. It's a big part of why I am doing the mods as the potholes here are brutal. I went from 17" wheels and tires on my CRV to 16" Nokian Rotiiva AT tires and the larger sidewalls made the ride nice. it barely effected the handling but I get one tire year round as they are Mountain snowflake rated and I improved the pothole survival of my wheels.

Doing the maths as the GT guys say. I am giving the car 1.5" of lift.

26.9" Grabber - 23.5" Altimax = 3.4" Diameter / 2 = 1.7" needed clearances. I will need to maybe install a spring stiffener to the front or back and cut the bumpers a bit. I am also willing to trim fender metal and add flares and offset with spacers for the width of the tire. I am going to do some measurements in the back wheel wells and arches now that the lift is in a settled from a few drives to work and see where I might get an issue or not.
06YarisRSFredericton, New Brunswick, Canada · Mar 27, 2019#134
Originally Posted by Maritime ↑
...as the potholes here are brutal.
Werd 😳
YarMateyCalgary, AB, CANADA · Mar 27, 2019#135
You may be able to get away with the amount of lift you’re putting on. I’m running 185/65r15s on stock steelies, which are 24.5” diameter, and have no issues with rubbing.

When I bought the tires they were originally mounted on Kia Rio wheels which were the same width but had a +36 offset instead of the stock +45 and I got rubbing over bad bumps where the fender attaches to the bumper. It’ll mainly be the fun trial and error in finding out what works best I think! Excited to see those beefy grabbers on there though!
MaritimeThread starterWoodstock nb · Mar 27, 2019#136
Originally Posted by YarMatey ↑
You may be able to get away with the amount of lift you’re putting on. I’m running 185/65r15s on stock steelies, which are 24.5” diameter, and have no issues with rubbing.

When I bought the tires they were originally mounted on Kia Rio wheels which were the same width but had a +36 offset instead of the stock +45 and I got rubbing over bad bumps where the fender attaches to the bumper. It’ll mainly be the fun trial and error in finding out what works best I think! Excited to see those beefy grabbers on there though!
Good to know. I am just about to look at what my TireRack special alloys offset is to see if I need more. the wheels and tires were off my old 96 Civic hatch, I'v had them for 8 years now. Just lucky the Yaris could take the same slightly larger tire. Right now I have my winters in the same size on a set of mazda protoge steel wheels, know idea the offset on those either but they fit fine too.
MaritimeThread starterWoodstock nb · Mar 27, 2019#137
so my sport edition F12's are 14X6 38MM offset. you say 45MM is stock. I need to remember myself what that means for wheel in well position. Less puts wheel farther out bound, more puts it more inbound or is it the reverse?

Size:
14x6
Offset:
38mm
Backspacing:
5.00"
Bolt Pattern:
4-100
Rec. Tire Size:
175/65-14
Weight:
15.0 lbs.
YarMateyCalgary, AB, CANADA · Mar 27, 2019#138
Yeah so the +38 will sit 13mm further away from the strut. Wheel width is another thing to take into consideration though. For example, the wheels I had for a Kia Rio were 5.5” wide and +36 offset. The tire shop was originally going to order me a 6” wide wheel with a +45 offset. With the extra 0.5” wheel width the offset difference wouldn’t have mattered.

This is a good website to get a visual of how offsets and widths will affect your wheel placement.

https://www.willtheyfit.com
YarMateyCalgary, AB, CANADA · Mar 27, 2019#139
If you do go the route of the 27x8.5 grabbers maybe take a peek at what the minimum required wheel width is for that tire too, might factor into things.
MaritimeThread starterWoodstock nb · Mar 27, 2019#140
Originally Posted by YarMatey ↑
If you do go the route of the 27x8.5 grabbers maybe take a peek at what the minimum required wheel width is for that tire too, might factor into things.
Thanks. sorted that already 6 is the min and I was about to calculate some stuff but I'll check the link you posted first.
MaritimeThread starterWoodstock nb · Mar 27, 2019#141
OK, from that site, I am good for suspension clearances. Outer wheel arch may rub but I won't need offset spacers from the looks of it. The protege wheels I have are 14X5.5 45MM offset. The wider tire, had to put closest Pmetric size as 27x8.5 screwed it up.

1 attachment not included in this copy

MaritimeThread starterWoodstock nb · Mar 27, 2019#142
oh and here is the plan to stop the over compression of the strut top rubber mount. Those are the bump stops out of my CRV struts I rebuilt.

2 attachments not included in this copy

MaritimeThread starterWoodstock nb · Apr 2, 2019#143
So I have yet to get the modded lifts in the front but I did measure my rear wheel wells and I have 2.25" before the front of the arch would get hit, which means no trimming near the door. I'll need to trim the back bumper a bit as I have just about 1.5" at the rear of the arch and the tires are 1.6" bigger. We'll see for sure but trimming the plastic bumper is not a deal breaker. I need to mock up a fake tire on the alloy rims to check the front once I get it lifted finally. I may get to it tonight or tomorrow depending on honey do's etc.
YarMateyCalgary, AB, CANADA · Apr 2, 2019#144
You could just go to a tire shop or an auto junker and see what a cheap used tire that size would cost. I imagine not much. Might be able to give you a better idea for trimming if you have some actual rubber that size.
Interested to see how those grabbers look on there! They’re going to be some beefy tires!
MaritimeThread starterWoodstock nb · Apr 2, 2019#145
Originally Posted by YarMatey ↑
You could just go to a tire shop or an auto junker and see what a cheap used tire that size would cost. I imagine not much. Might be able to give you a better idea for trimming if you have some actual rubber that size.
Interested to see how those grabbers look on there! They’re going to be some beefy tires!

good point, I have the HF tire changer for bike tires and have taken tires of car rims with it, If I can get a scrap one in the right size I could swap it and inflate it probably easier than making a dummy tire. The only thing is they are pretty rare tires around here. When I went in to my shop and asked them to look at them for pricing, the guy argued they didn't make that size and was surprised when they came up available in their system. If I still had my 15" rims I could find a tire in the P-Metric size that would be really close easier but I sold those rims.
MaritimeThread starterWoodstock nb · Apr 2, 2019#146
225/70/14 exists and may be easier to find. I't pretty close in size to the 27x8.5R14. I'll try that one.
YarMateyCalgary, AB, CANADA · Apr 2, 2019#147
Yeah I’m sure there’s a couple sizes that would end up similar enough in diameter that could work just like you pointed out. Good luck hunting!
YarMateyCalgary, AB, CANADA · Apr 16, 2019#148
Originally Posted by thebarber ↑
scion xb gen1 springs: LIFT IT. LIFT IT GOOD!

Picture not included in this copy

With just the xD springs how much lift would you estimate it gave you? Any issues with the shocks being topped out that you noticed?

Also, Myfirstyota you said the whole strut assembly from an xD will bolt right into a Yaris with no modification? What about the rear shocks do you know?
Tskm2Montreal · Apr 20, 2019#149
Update !?
MaritimeThread starterWoodstock nb · Apr 21, 2019#150
Originally Posted by Tskm2 ↑
Update !?
Life. LOL. I will have time wed or thur I hope to put the front and see. Backs been holding up but its clunky so need to find out why before I make it permanant. I thinknit may be shocks topping out over bumps and if thats true I need to extend them to prevent damage.

Sent from my moto e5 play using Tapatalk