govtecOriginal postPhila, PA · Dec 10, 2017#1Hi All,
Look what I got early for Christmas this year. Yup, just received my order from Buyee for a pair of JDM HID Headlight from Japan. I actually got 2 sets (ordered the post-facelift by accident). I will be using the pre-facelight for my wife's 07 Hatch and plan on selling the post-facelift once I'm done with the DIY write-up.
Now here comes the hard part. I'll need everyone's input to make this project a success and everyone else will have a chance to do the conversion. Specifically, I need part numbers that I need to order for the pigtails without cutting any wires coming from the car.
Enviri - Feel free to chime in since you've already completed this project in another post. Do you mind sharing the male/female pigtail plugs that I need to purchase?
Thank you all! I've done this JDM HID conversion on my 09 Rav4 and it makes a world of difference driving at night!
7 attachments not included in this copy
Replies 118
enviriCT · Dec 11, 2017#2Picture not included in this copy
Picture not included in this copy
enviriCT · Dec 11, 2017#3hmm it looks like you already got the ballasts included (i hate you for that)
90980-10942(x2) is the female 4 pin connector you need.
(luckily it seems someone is selling one with wires already put in place,
https://www.ebay.com/itm/90980-10942...t/351993047230)
then you need to ebay a quality h4 female pigtail connector, and a 194/t10 parking light extension cable.
then of course, a D4R bulb (NOT AN D4S, D4C may work.) and H7 for the super useless highbeam.
D4R in america is used in 06-09 prius, and 08-10 avalons.
GARAX and TOM's makes great bulbs outside the traditional OEM color range, that wont destroy the wallet btw...
CTScott helped alot on details of connecting the wiring, and he added an extra ground somewhere, which i forget.
WhiplashOntario · Dec 11, 2017#4I would like this, depending on total price.
govtecThread starterPhila, PA · Dec 11, 2017#5Thanks enviri, I'll get the ordering started. My headlight pretty much came with everything including all the bulbs and ballasts. Am I still good to use the D2R bulb? It says on the side of the marking D2R 35W. The highbeams were a real pain to take out because the retainer clip was on pretty tight. Luckily I won't be changing this that often.
Also, if you take a look at img1141, it shows the the top half of the HID projector beam inside the case. Unlike my Rav4, which I had to reverse the metal plate that was inside the projector casing, it appears that with the Yaris there is no metal plate on the inside and you can adjust the beam pattern from left hand side to right hand side by just using a screw driver.
Enviri - On the last image, can you get met started on which of the 4 wires are connected to the H4 connector?
Thanks
9 attachments not included in this copy
enviriCT · Dec 12, 2017#6if it already has d2r then first check the part number of the ballast, and stay d2r.
wiring i have to get back to you.
im pretty sure green is the parking light, and black is common ground. our headlight has a switched positive setup (or is it switched negative?), i gotta pop the hood and check it out once weather permits.
ezhacker1San Francisco · Dec 12, 2017#7H4 Connector is switched ground. Low and Hi has their own ground pin.
Based on Enviri connector photo and pin orientations im guessing
Red Low Beam
Black Hi Beam
Green Parking
Black 12v.
fredovvtiSabana Grande, PR · Dec 14, 2017#8How much you pay for shipping?
govtecThread starterPhila, PA · Dec 14, 2017#9I think $110
govtecThread starterPhila, PA · Jan 11, 2018#10Now that I'm catching a break from the snow and all my harnesses have finally arrived. I'm hoping to install this soon. Enviri - Any luck with getting the wire connections from your car? Just need some wire identification so I can solder the 4 to 3 prong harness. Also, I'm not sure where the 194/t10 parking light extension cable goes because I don't see any plug holes left for me to put this in the headlight. I took the little light bulb out in the picture and tried connecting the 194/t10 extension cable but that plug was fine with without any extension cable.
Thanks
6 attachments not included in this copy
enviriCT · Jan 12, 2018#11I, too am at the mercy of the weather. Yesterday was perfect but i read this post near midnight lol. Today is warm but gettin some monsoon rains...
Anyway heres a quicky
Picture not included in this copy https://youtu.be/F7PloYRGlrE Parking light ground i think is connected to chassis. I need a good calm day to rip apart my headlight!
enviriCT · Jan 12, 2018#12Also you might start poppin fuaes on headlight use like i did. I went against ctscott's recommendation and went +5a... Although i think +2.5a is enough, maybe?
govtecThread starterPhila, PA · Jan 12, 2018#13Thanks dude! I'll give it a shot when the weather warms up again. I don't want to mess with the fuses or anything else because I'm not a very technical guy and don't want to burn anything.
enviriCT · Jan 12, 2018#14once you're connected and got it working, the fuses will pop itself lol. It wasnt instant, but some days, off it goes. its the low beam fuse, obviously. i havent changed fuses since i upped the amps years back.
govtecThread starterPhila, PA · Jan 12, 2018#15enviriCT · Jan 19, 2018#16govtecThread starterPhila, PA · Jan 20, 2018#17Wow, what a difference between the HID and halogen lights.
Looks like we'll have warm weather for the next 2 weeks. Let me know if you can get one of the headlight apart and shoot the vids for each connecting harness. I only got a few of connecting wires from the first youtube video you put up because of the camera angle.
Thanks
enviriCT · Jan 20, 2018#18Maybe tommorow!
enviriCT · Jan 21, 2018#19enviriCT · Jan 21, 2018#20Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
govtecThread starterPhila, PA · Jan 22, 2018#21Great, thanks dude! I see you got the auto-leveler...I'm not planning on using that.
enviriCT · Feb 26, 2018#22 Originally Posted by
govtec ↑ Great, thanks dude! I see you got the auto-leveler...I'm not planning on using that.
i didnt use it either. i'd have to replace one of the switches for one with auto leveling, then route wiring to that leveler thing...yeah dont need it. It's rusting away at a good pace 👍
David CMontreal · Feb 28, 2018#23So what's the approximate cost to do the conversion ?
enviriCT · Feb 28, 2018#24depends how lucky you are on getting a complete headlight unit, and how patient you are on shipping. the headlights are 30-100 USD on jp auctions. the necessary wiring is a good 50 or so. Assuming that the headlights came with ballast and the bulbs are in there, that's your bare minimum cost+shipping to your home. (ems shipping for these are about 150 to east coast usa)
David CMontreal · Feb 28, 2018#25Ah, yeah it's a little bit of knowing what you're doing and buying project. Not sure I am committed enough to go that route.
What I really feel that is missing on the Yaris light output is the medium to close range, it's like the beam pattern doesn't light down the road enough and it's not relaxing at times especially in dark rain or poorly lighted roads structures like overpass and access ramps. I really like how much the LED fog light setup of IllusionX fills up the lower parts of the road, I'm thinking I may very well just slap an LED bar in the front grill and carefully select and aim it so it doesn't blind anyone.
enviriCT · Feb 28, 2018#26fog lights help immensely in that range. I have the morimoto XB LED fog lights, never looked back.
David CMontreal · Mar 4, 2018#27What do you think of these ? I'm not familiar with what's real and what's gimmick in terms of projectors and lights, but I'm thinking it could be nice if its a real HID projector setup ?
https://m.ebay.com/itm/YARIS-XP90-MK.../112525893808? Picture not included in this copy Picture not included in this copy2 attachments not included in this copy
fredovvtiSabana Grande, PR · Mar 25, 2018#28Hi,
Anyone can help me, I buy this headlights but can make work. I see the pictures make the right connect, but went a put it in the car, they dont work. Please you can but a clear instructions to how connect the extra ground?
Thank you!
Sent from my SM-N950F using Tapatalk
fredovvtiSabana Grande, PR · Mar 25, 2018#29 Originally Posted by
enviri ↑ Also you might start poppin fuaes on headlight use like i did. I went against ctscott's recommendation and went +5a... Although i think +2.5a is enough, maybe?
Where you change the fuses?
Sent from my SM-N950F using Tapatalk
enviriCT · Mar 25, 2018#30fuse box in engine bay
Picture not included in this copy
#17-18
enviriCT · Mar 25, 2018#31 Originally Posted by
fredovvti ↑ Please you can but a clear instructions to how connect the extra ground?
the extra ground is needed for the parking light (little bulb), so an extra wire goes from the ground for that parking light to the chassis.
fredovvtiSabana Grande, PR · Mar 25, 2018#32 Originally Posted by
enviri ↑ fuse box in engine bay
Picture not included in this copy
#17-18
So, does 2 fuses arw #10. I have to go up to #30 both?.
Sent from my SM-N950F using Tapatalk
enviriCT · Mar 25, 2018#3312.5 or 15. I went with 15. CTScott recommended against it for fire hazard, but its the only way for my headlights to stay working...and its been years since i changed it with no issue. no flicker, no premature blown anything.
govtecThread starterPhila, PA · Mar 25, 2018#34 Originally Posted by
fredovvti ↑ So, does 2 fuses arw #10. I have to go up to #30 both?.
Sent from my SM-N950F using Tapatalk
I wouldn't do that, there is a reason the fuse is at 10amp. You have to ground it properly. Did you try enviri's suggestion? I didn't get a chance to install my headlights yet because of the weather and school.
govtecThread starterPhila, PA · Mar 25, 2018#35 Originally Posted by
David C ↑ Ah, yeah it's a little bit of knowing what you're doing and buying project. Not sure I am committed enough to go that route.
What I really feel that is missing on the Yaris light output is the medium to close range, it's like the beam pattern doesn't light down the road enough and it's not relaxing at times especially in dark rain or poorly lighted roads structures like overpass and access ramps. I really like how much the LED fog light setup of IllusionX fills up the lower parts of the road, I'm thinking I may very well just slap an LED bar in the front grill and carefully select and aim it so it doesn't blind anyone.
What year is your car? I accidentally ordered a pair of post facelift JDM HID headlights that I will sell soon here in the states once the weather warms up and I install the pre facelift headlight in my car. The only thing that is missing is the ballast which you can get off of ebay easily. I can definitely sell it to you if you want to wait little bit.
enviriCT · Mar 25, 2018#36 Originally Posted by
govtec ↑ The only thing that is missing is the ballast which you can get off of ebay easily. I can definitely sell it to you if you want to wait little bit.
USDM lexus ballasts work well 👍
fredovvtiSabana Grande, PR · Mar 25, 2018#37Thank you guys for the help, i will imput my updates.
Thanks very much!!
Sent from my SM-N950F using Tapatalk
David CMontreal · Mar 25, 2018#38 Originally Posted by
govtec ↑ What year is your car? I accidentally ordered a pair of post facelift JDM HID headlights that I will sell soon here in the states once the weather warms up and I install the pre facelift headlight in my car. The only thing that is missing is the ballast which you can get off of ebay easily. I can definitely sell it to you if you want to wait little bit.
Mines a 2007 HB.
I installed LED H4 bulbs and Morimoto XB fog lights two weeks ago and now I'm doing a lot better on lighting. Thanks for the offer tho.
fredovvtiSabana Grande, PR · Apr 1, 2018#39 Originally Posted by
enviri ↑ USDM lexus ballasts work well Picture not included in this copy
What model that you use? I buy a pair but it came with a diferent conector.
Sent from my SM-N950F using Tapatalk
enviriCT · Apr 1, 2018#40Picture not included in this copy
ground cable not needed.
fredovvtiSabana Grande, PR · Apr 2, 2018#41 Originally Posted by
enviri ↑ Picture not included in this copy
ground cable not needed.
Thats the one I order, but seen your videos the cover of the ballast from my headlights are much bigger. I put this one but they are small.
In the pictures, that is the ballast that came in the headlight.
Picture not included in this copyPicture not included in this copy Sent from my SM-N950F using Tapatalk
enviriCT · Apr 2, 2018#42if that's the case you might have to stick with those or maybe look into whatever the prius used in 2006.
85967-50020 is used in
Japan 08/2000-07/2006 TOYOTA CELSIOR UCF3* 81-01: HEADLAMP
N. America 08/2000-07/2006 LEXUS LS430 UCF30 81-01: HEADLAMP
fredovvtiSabana Grande, PR · Apr 8, 2018#43At last, my headlights are working. Here are photos of the outpug. The firts are lows, the second are the highs. I tell you, is the best output I see.Picture not included in this copyPicture not included in this copy
Sent from my SM-N950F using Tapatalk
enviriCT · Apr 8, 2018#44welcome to the jdm club :P
fredovvtiSabana Grande, PR · Apr 8, 2018#45Thank you all guys for your help!!!
Sent from my SM-N950F using Tapatalk
govtecThread starterPhila, PA · May 6, 2018#46Hey Enviri,
I just got to installing my JDM headlights today...After taking the passenger side headlight out, I find that I ordered the wrong female 3 prong plug! Should have been a male 3 prong plug! The other thing I realized is that after accounting for all of the harnesses, I'm left with 2 unplugged harnesses and I remember your vids only had the brown harness that was left unplugged. So then I realized that I'm missing the parking light plug altogether. This leads me to 3 questions I have for you...
1) What is the part number that I need to order that will plug into the parking light harness on the car side?...From your video's I see that it is a 2 prong male connector.
2) Why do I need the extension cable again? I don't see where it is needed as all of the wires and harnesses are tucked into the big black HID cap housing.
3) Can you confirm the exact ground wire that I'm tapping into in
post # 20 in the last picture?...Is it the HID wire, parking light wire or high beam?
Thanks
https://drive.google.com/open?id=1_j...gNcYIvWZ-ZvY4d https://drive.google.com/open?id=17X...OPSm9RR9qe6-80 https://drive.google.com/open?id=1Tm...kvrmZNCh53sQ02 enviriCT · May 7, 2018#47lol woops.
1) ebay or
amazon. 2) extension? i dont remember? lol
3) ground is definately parking light.
2 unused plugs...i have to check again, only unused plugs i have are parking light plug on each side if i remember right...which i believe is that brown connector on your third pic.
govtecThread starterPhila, PA · May 7, 2018#48 Originally Posted by
enviri ↑ lol woops.
1) ebay or
amazon. 2) extension? i dont remember? lol
3) ground is definately parking light.
2 unused plugs...i have to check again, only unused plugs i have are parking light plug on each side if i remember right...which i believe is that brown connector on your third pic.
1) I don't think we're talking the same thing. Look at
pic # 4 of post # 20. The t10/194 plug does not look anything like pic # 4 which has Toyota specific plug housing.
enviriCT · May 7, 2018#49Picture not included in this copy
should be parking light connection, connected to that free brown female plug. the 194/t10 male connects to that.
govtecThread starterPhila, PA · May 7, 2018#50Your video's showed the brown one was unplugged. I'm looking for this 2 prong male grey plug that I see was spliced to the 4 prong plug as well as the the ground wire.
See pic of what I'm referring to...
1 attachment not included in this copy