Yarisworld Archive

My 2zrfe swap

132 posts · 49,049 views · page 3 of 3

Replies continued

ArmstrongRacingSan Diego · Apr 15, 2016#101
Awesome man! Congrats and welcome to the dark side! LOL!
ern-dizCA all day · Apr 15, 2016#102
So jelly!
brushforhireThread starterJohnstown, PA · Apr 24, 2016#103
Okay, so I gave it a test drive today! Fantastic. I got a CEL and I gotta get it checked. I have to finish the painting, and a few other adjustments, like setting the proper height for coilovers.

I will get a video up the sound soon.
Frank the TankToronto · Apr 26, 2016#104
what was the CEL for?
brushforhireThread starterJohnstown, PA · Apr 27, 2016#105
Not sure yet, I know one problem was a bad MAF sensor, but even after disconnecting the battery and letting it sit, the CEL came back on.

I am finishing the painting this week and will drive it to work on Monday and have them check the CEL.

I am thinking a bad 02 sensor, but I am hoping it is something simple. I will keep you all updated.

Pictures, and possibly video on monday! The car looks so goofy with only partial painting being done right now. Lol
brushforhireThread starterJohnstown, PA · May 2, 2016#106
I drove it to work today. Turns out I have the P0977 code and P2770 code. I will double check my grounding and see if is loose. I am hoping that might be why it doesn't really feel like it has more power at this point.

I am pretty sure I know what happened.

I grounded pin 10 to the tranmission, thinking that was the one I wanted. It is not. I need to ground out pin 9, but the XD harness does not have a pin 9. So I need to add PIN 9, and then reconnect pin 10 to the harness. I will simply move the ground from 10 to 9, and then take one of the pins from the yaris harness and solder it back to wire 10 on the xd harness. The worst part it pulling pins. Ugh.
brushforhireThread starterJohnstown, PA · May 2, 2016#107
Okay so I moved the grounded wire to pin location 9, and added another wire/pin to location 10 and reconnected the wire to the ecu. CEL's gone!

If you use the XD harness the transmission plug only has 8 pins. You need nine. All you need to do is add a pin/wire from the yaris trans plug to location 9 and ground that out.

Still super simple, just a tad different. Runs much better.

As promised video of exhaust!

Exhaust I can say that it does sound a bit deeper in person, the phone's mic sucks.

And a quick pic of how it sits right now. Still have a few odds and ends to finish, but definitely better.

Picture not included in this copy

I have noticed what feels like torque steer.

1 attachment not included in this copy

tmontagueCaledonia Ont. · May 2, 2016#108
I can't remember, is your car auto or standard?
CrankyOldManWest Michigan · May 2, 2016#109
Auto. He the CELs were for transmission solenoid open/short connections.
ArmstrongRacingSan Diego · May 3, 2016#110
Glad to see those diagrams helped!

And now we have 2 fully functional 2zr/auto swaps! Keep us updated!
brushforhireThread starterJohnstown, PA · May 3, 2016#111
Will do! After adjusting the coilovers a little more, I will be getting an alignment on thursday. I also got my stereo hooked back up. I can't even hear the exhaust anymore. :)

So far it seems like it is relearning the shifting for the transmission. It does some weird stuff, but doesn't seem to do it again.

I will have to get another video of the exhaust as a drive by and from a few feet away. My coworker just drove it home, and it sounds so much better than I thought it did. Barely even really noticeable.
brushforhireThread starterJohnstown, PA · May 3, 2016#112
So a quick rundown of everything I have in modifications so far:

2zrfe engine swap
Takada xD cold air intake
RPM Long tube header and midpipe
DC sports xD Muffler
Megan racing coilovers
MI braided SS brake lines
TRD rear sway bar
Polyurethane front and rear control arm bushings
Scion xD/corolla front calipers
Yaris S front rotors
Gauges: Oil Pressure, Tach, Volt (gotta hook these up)
Relocated battery to behind passenger seat on the floor.
Optima Yellowtop battery - size 35
I used 0/1 oversized power wire and ground wire. Between my stereo, and the battery relocation, I did not want to risk and power issues. I'd rather go bigger and not need it, then have to rerun wire a third time.
Removed the rear seat, and seat belts.
tmontagueCaledonia Ont. · May 3, 2016#113
Do you have a link for the poly rear bushings? Also how'd you find the install of them?
brushforhireThread starterJohnstown, PA · May 3, 2016#114
I don't have a link. I bought them on ebay, they are the ones that add caster to the wheels. I would just use regular ones if i did it again. They were a nightmare to get the bolts through.

To get the old bushings our I use our press at work. I also used the press to get the new ones in.
brushforhireThread starterJohnstown, PA · May 4, 2016#115
I just tried to change the spark plugs, because I have no idea if they are original, aftermarket crap, etc.

Wish I would have done that before putting it in the car or putting the cowl panel back on.

It is a seriously tight fight, plus it uses a special super thin wall 14 mm socket. Regular 5/8 socket fits over the plug fine, but will not fit over the plug in the tube in the head.
beakerconyers ga · May 4, 2016#116
Originally Posted by brushforhire ↑
I just tried to change the spark plugs, because I have no idea if they are original, aftermarket crap, etc.

Wish I would have done that before putting it in the car or putting the cowl panel back on.

It is a seriously tight fight, plus it uses a special super thin wall 14 mm socket. Regular 5/8 socket fits over the plug fine, but will not fit over the plug in the tube in the head.
this may help

https://store.snapon.com/Standard-mm...t-P758173.aspx
ArmstrongRacingSan Diego · May 4, 2016#117
Originally Posted by brushforhire ↑
...So far it seems like it is relearning the shifting for the transmission. It does some weird stuff, but doesn't seem to do it again.
Because the valve body is different between the Yaris U340 and Xd U341 auto trans, it does feel a bit strange for a while. The good news is that the Xd ECM shift maps are SO MUCH better and your trans will be more responsive to grades and throttle input.
brushforhireThread starterJohnstown, PA · May 5, 2016#118
It is much, much better to drive. I got the alignment done today.

As a side note my weird torque steering issues, were because the front control arm bolts were loose enough to let the control arms move side to side. So that is fixed now.

I readjusted the pretension on the front spring and it alleviated the bounciness of the ride.

Only the toe on the left side was out a little bit. So nothing to bad on the alignment.

I gotta get the wiring and fuses cleaned up in the engine bay and this will be pretty much done.

I will get some pictures up, soon, of my car. Want to finish a few exterior things so it will look better.

Also, the brakes are awesome. Stainless braided lines and Xd from calipers/pads make a huge difference.

I will start a new thread with just the facts, and as much how-to only info as I can. Including anything we, as a community, have come across doing this swap. I want to try and make this as clear and dry for others to do as possible.
WeeYariGeorgetown, Ontario, Canada · May 5, 2016#119
Originally Posted by brushforhire ↑
I will start a new thread with just the facts, and as much how-to only info as I can. Including anything we, as a community, have come across doing this swap. I want to try and make this as clear and dry for others to do as possible.
Awesome job man. So jelly!

For the new thread, do what Cranky has done and 'reserve' a bunch of posts for your documentation. Otherwise, pollution will happen.
tmontagueCaledonia Ont. · May 5, 2016#120
Aaamazing, glad you're loving the swap. I'm really looking forward to the new thread w/ just the facts from the swap. Like it was said above, reserve some space for yourself
brushforhireThread starterJohnstown, PA · May 5, 2016#121
LoL, the first thing I thought when I saw what Cranky did, was "I am so doing that". It was a great idea

Also, if anyone needs any help I am also available. I know Armstrongracing really helped this get started, but I want to make myself available.

The Takada intake fits nearly perfectly, also. I just gotta get a new reducer coupler to correct a length issue. I have two couplers back to back right now as a makeshift reducer and it makes it a tad to long to line up the mounting holes.
ArmstrongRacingSan Diego · May 5, 2016#122
Love it man! Great work!!
junorico24Sydney · May 14, 2016#123
In australia there's 2zr-fae is this same engine?
Frank the TankToronto · May 14, 2016#124
Originally Posted by junorico24 ↑
In australia there's 2zr-fae is this same engine?
Same engine but with new technology and a little more HP
brushforhireThread starterJohnstown, PA · May 21, 2016#125
So here are two quick pics of my engine bay. I still have to do some wire tidying, but it is coming along nicely. I'm happy with it. The intake does fit nicely. I couldn't really get the top mounting point to align until the vehicle was on the ground. The bottom hole does not line up. It is pretty secure and I've put several hundred miles with no issues on it.

Picture not included in this copy
Picture not included in this copy

Also a surprise. I was just gonna drill three holes in the glove box lid to mount my three gauges, but I plan on turboing this, and really didn't want to have gauges on the a pillar. So I decided to fiberglass a gauge pod setup. It will house my tach, volt gauge, oil pressure, boost, coolant temp, and AFR.
I'm not totally sure on the timeline for the turbo, but I am hoping before the year is out.

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

The gauge pod will have a bolt on face, so that I can take it off to service anything that may need fixed or replaced. The main housing will stay bolted into the dash. I am thinking I might wrap the top in carbon fiber, but I don't know how motivated I will be to do that. LoL.

6 attachments not included in this copy

CrankyOldManWest Michigan · May 21, 2016#126
Nice! I had considered using those expanding foam packaging inserts to make a positive mold of it, but didn't want it to leak all over. I ended up using cereal boxes and tape to get the outlines of the shapes and then laser cut it from acrylic.
brushforhireThread starterJohnstown, PA · May 23, 2016#127
So I finally got the speed signal from the ABS module figured out. It really ended up being stick the wire in the hole, test drive, rinse and repeat, until I got it.

So I am using this as my speed signal and will remove the rest of the speed sensor wiring from the stock tranny. I will use the power supply to the sensor to power the MAF sensor instead of using the add-a-circuit.

More so just being anal about my wiring.

Here are pics of where I ended getting the signal from. It is the white wire, fourth from the left, in the top row, including the two bigger wires.
Picture not included in this copy
I simply cut the pink speed signal wire, and spiced the wire to it going into the fuse box.
Picture not included in this copy

I already added this info to the sticky, so future swaps using any trans other than the stock ones that have the speed sensor, can steal the signal from the ABS module, or just redo wiring for cleaning up the engine bay purposes.

I also double checked the speed on the gauge against my GPS unit, and they were almost exact. So both are way off, or both are dead on. 😆

2 attachments not included in this copy

ArmstrongRacingSan Diego · May 23, 2016#128
Great work man!
thebarberGrand Rapids, MI · May 24, 2016#129
Originally Posted by WeeYari ↑
Awesome job man. So jelly!

For the new thread, do what Cranky has done and 'reserve' a bunch of posts for your documentation. Otherwise, pollution will happen.
2zr time, wee?
RagnaCaTVillalba, Puerto Rico · Jun 8, 2016#130
Hello!!! So sorry I missed out on this Thread!!! Any help let me know going to start reading it all now!!!
brushforhireThread starterJohnstown, PA · Jun 8, 2016#131
Originally Posted by RagnaCaT ↑
Hello!!! So sorry I missed out on this Thread!!! Any help let me know going to start reading it all now!!!
Awesome, thanks!

Also did a just the facts thread here: Official how-to.
RagnaCaTVillalba, Puerto Rico · Jun 8, 2016#132
Originally Posted by brushforhire ↑
Awesome, thanks!

Also did a just the facts thread here: Official how-to.
So much info it was great to read all of it!!! So glad more people are jumping on the swap.... In my personal opinion more power for the monet you can spend modding a 1NZ. Glad you you also went with the RPM Header love mines since day 1.
I just reswapped my 2 year old 2ZRFE with a a 12,000 mile one this sunday. Going to work on the internals, see how much power can be achieved