Replies continued
fnkngrvThread starterIn The Hotbox · Jan 10, 2016#151If TBR would like to sponsor the car by assisting with safety equipment, etc then they know where to reach me. Other than that posting up about very expensive components that will not be purchased or put into the build is moot. There is a reason the build is taking the path that it has which is that it is still driven on a regular basis when weather permits. The back seat gets used as well as the trunk so at this stage a fuel cell with inline components is not realistic. This has not changed in the 5 years the car has been run heavily modified and right now no plans to change that.
Sent from m-o-b-i-l-e
Focus_Sh1ftNew Jersey · Jan 11, 2016#152I have an Aeromotive A100 in the tC, and it's LOUD. I wouldn't worry too much about the noise unless you're beginning to have fuel starvation issues.
ilikericesavannah, ga · Jan 11, 2016#153 Originally Posted by
fnkngrv ↑ Your new threads and posts smell a like like you are Aras. Am I correct?
Sent from m-o-b-i-l-e
5 years later.. still haven't seen that xB run...
fnkngrvThread starterIn The Hotbox · Jan 13, 2016#154 Originally Posted by
Focus_Sh1ft ↑ I have an Aeromotive A100 in the tC, and it's LOUD. I wouldn't worry too much about the noise unless you're beginning to have fuel starvation issues.
It doesn't really bother me too much unless I am standing outside the vehicle while it idles or at a stop light, etc. I guess that I just need to get used to it for a while. I should have converted to an inline pump and then could have wrapped it in sound deadening material like some folks have, but my updates went over budget as it is. 😳
fnkngrvThread starterIn The Hotbox · Jan 18, 2016#155The car will be receiving the new Tanabe Coilovers in the a.m. in preparation for being loaded on the trailer in the afternoon to make the 250 Mile trip to the Dyno. Wednesday we will see how things are really looking.
Sent from m-o-b-i-l-e
fnkngrvThread starterIn The Hotbox · Jan 20, 2016#156First time ever she has been on the scales. Have to reduce the weight by whatever my subwoofer box weighs. More than I was figuring, but with the added weight of the turbo, associated components, etc I suppose I can't complain.
Picture not included in this copy
Sent from m-o-b-i-l-e
Bluevitz-rsOshawa, Ontario, Canada · Jan 20, 2016#157was that with you in the car and a full tank of gas?
fnkngrvThread starterIn The Hotbox · Jan 20, 2016#1581/2 tank of gas no occupants.
Sent from m-o-b-i-l-e
Bluevitz-rsOshawa, Ontario, Canada · Jan 20, 2016#159If it ever comes down to it, gasoline weighs about 1.6 pounds per liter.
invader166Langley, BC · Jan 20, 2016#160 Originally Posted by
Bluevitz-rs ↑ If it ever comes down to it, gasoline weighs about 1.6 pounds per liter.
...or 6 lbs per gallon, if you wanna keep the same system of measurement.
Here in Canada, it's all just a big mix, and people just use whatever is more convenient or feels more natural to them. lol
Bluevitz-rsOshawa, Ontario, Canada · Jan 20, 2016#161 Originally Posted by
invader166 ↑ ...or 6 lbs per gallon, if you wanna keep the same system of measurement.
Here in Canada, it's all just a big mix, and people just use whatever is more convenient or feels more natural to them. lol
There's two different measurements of gallons so it's way more confusing to me.
Sent from my iPod Touch
fnkngrvThread starterIn The Hotbox · Jan 26, 2016#162Some post dyno day action items:
Had to order a couple fuel filters. $20 thru Summit.
Also had my 3rd oil sending unit die during the pulls so ordered another one plus braided line to remotely mount it to the crash bar. They don't seem to stand up to the vibration very well. That came to around $80.
Lastly the BOV spring is apparently too stiff because it isn't opening completely fast enough when letting out of the throttle after full boost. The surge keeps popping one of my pipes of the IC due to the tight angle of the pipe. So ordered the spring kit from TurboSmart for $20.
Sent from m-o-b-i-l-e
LTHatchNewark NJ · Jan 27, 2016#163How does the stock transmission shift at 8k? Have you done anything to the oil pump to handle 8k plus?
fnkngrvThread starterIn The Hotbox · Jan 27, 2016#164Oil pressure seems to be doing fine. As for shifts at 8k I doubt that I will be shifting that high.
Transmission has been fine for the builds that I have seen at this power level. The guys I have talked to have not indicated failure. With what I do for racing it isn't as tough as road course or auto x so hoping that it holds together for a while. After that the plan is for custom gears. The TRD 6 speed is unfortunately out of the question as it has a shorter final gear and therefore doesn't have the potential for top end like the 5 speed does.
Sent from m-o-b-i-l-e
fnkngrvThread starterIn The Hotbox · Feb 3, 2016#165Big shout out to Autolite for becoming an official spark plug sponsor for TTR. Can't wait to test these different flavors out and see which delivers the best overall performance!
Picture not included in this copy
Sent from m-o-b-i-l-e
Bluevitz-rsOshawa, Ontario, Canada · Feb 4, 2016#166It would be really neat to see the difference back to back on the dyno if you have the time.
fnkngrvThread starterIn The Hotbox · Feb 5, 2016#167 Originally Posted by
Bluevitz-rs ↑ It would be really neat to see the difference back to back on the dyno if you have the time.
It will depend on how things go. I pay for all the time the car is on the rollers so have to be careful. If I can I will though.
Sent from m-o-b-i-l-e
1nz revolutiontx · Feb 5, 2016#168Not even worth entertaining on the dyno for spark plugs. I'm sure by now you know what works best for your application. Not an Autolite fan but free is a good deal.
sickpuppy1Kansas · Feb 8, 2016#169Yeah, I'll take the Iridium XP's on the right,lol Got 98k on the car and thinking of changing them @ 100K.
fnkngrvThread starterIn The Hotbox · Mar 23, 2016#170Still in need of completely cleaning the fuel system, but also took this video this evening. Custom sidewinder turbo manifold, 3" Vibrant GESI cat, 3" vibrant t-304 pipe to Vibrant 9" x 3" muffler coming off the 1nz. Man I love the sound of the new setup, but thinking I am going to still have to install a resonator to avoid excessive noise tickets. Hoping to capture a drive by video soon.
Exhaust System ...
tmontagueCaledonia Ont. · Mar 24, 2016#171Awesome sound... but I could see it being an issue w/ excessive noise tickets
ern-dizCA all day · Mar 24, 2016#172Sounds killer.
LTHatchNewark NJ · Mar 25, 2016#173That sounds very aggressive, do you have a lot of drone in the car? Curious to hear it under load, how much the sound changes.
fnkngrvThread starterIn The Hotbox · Mar 25, 2016#174The noise in the cabin is a little to much. Under load it gets really loud. The resonator will make a decent difference according to my research. The big question is whether I will do a bottle style from Vibrant or their Ultra Quiet.
Sent from m-o-b-i-l-e
LTHatchNewark NJ · Mar 25, 2016#175fnkngrvThread starterIn The Hotbox · Mar 25, 2016#176The resonator will slide in behind the midpipe hangers. So it will go like this:
V-band • cat • hangers • resonator • V-band
The midpipe is removable so when I race I can pull it and install a downward dump tip right after the downpipe.
Those are LED parking/brake lights. They are something I did a retrofit from the Lexus RX350.
Sent from m-o-b-i-l-e
ern-dizCA all day · Mar 25, 2016#177 Originally Posted by
LTHatch ↑ Does your rear bumper had LED brake lights above the exhaust outlets? That looks clean.
Originally Posted by
fnkngrv ↑ Those are LED parking/brake lights. They are something I did a retrofit from the Lexus RX350.
Super clean; really like it.
fnkngrvThread starterIn The Hotbox · Mar 25, 2016#178 Originally Posted by
ern-diz ↑ Super clean; really like it.
Thank you and LThatch both. I wanted to have more lights since I deleted the upper brake light since it was integrated into the OEM S spoiler I took off. I also have white backup LEDs that need to still get installed.
Sent from m-o-b-i-l-e
fnkngrvThread starterIn The Hotbox · Apr 15, 2016#179So pretty pumped that I can drive the Yaris again now that the resonator is installed. I put together a comparison video of the difference without it and then today with it. I am pretty happy with the results. All I can say is that a turbo 1nz with a 3" exhaust sounds mean as fack...lol
New setup is: Sidewinder Turbo Manifold -> BW Turbo -> 3" DP -> Vibrant 3" GESI Cat 7530 -> Vibrant Ultra Quiet 1142 resonator -> Vibrant 9" 1769 Race Muffler.
2016 Full Turbo Street Exhaust LTHatchNewark NJ · Apr 16, 2016#180That sounds a bit less wild, it still screams power.
"ill just have to be smart in town" lol how is that even possible with that much noise? Does she set alarms off as you drive by at cruise speeds with the new setup?
Hope you upload more videos(cruising WOT etc), this is a nasty Yaris.
fnkngrvThread starterIn The Hotbox · Apr 16, 2016#181We need to take her out and smooth out the tune this week and then hopefully can do some videos. Also may need to deal with a possible boost creep issue. I may need to upgrade to a 50mm WG. I am hoping not, but may have to. The other choice may be to reconfigure the dump tube off the manifold. We think that perhaps the angle for it is wrong and that flow isn't entering it as efficiently as it should. I took her out for a bit today and did a WOT pull which sat at 18psi for a few seconds and then buried the gauge out of the blue at 20+. The good thing is my street tune timing is set safely and the block is sleeved...lol.
Sent from m-o-b-i-l-e
LTHatchNewark NJ · Apr 16, 2016#182Ah, either of those boost creep options don't sound very pleasant. How was your traction with the 20+ psi boost spike? I imagine you blow the tires away at anything below 40mph lol
fnkngrvThread starterIn The Hotbox · Apr 16, 2016#183When I did a couple of the pulls I broke loose in 3rd and 4th
Sent from m-o-b-i-l-e
LTHatchNewark NJ · Apr 17, 2016#184😲
47_MasoN_47Northwest Alabama · Apr 18, 2016#185Man that thing sounds MEAN!
fnkngrvThread starterIn The Hotbox · Apr 21, 2016#186 Originally Posted by
47_MasoN_47 ↑ Man that thing sounds MEAN!
I have been getting a bunch of people locally telling me how much they like it too
Sent from m-o-b-i-l-e
fnkngrvThread starterIn The Hotbox · Apr 21, 2016#187Right now as it stands I won't be buying any more AEM junk. About the only thing they sell worth a damn is their EMS.
Teach me to buy any more AEM parts. Second brand new fuel pump that is defective in under 5000 miles. Never again.
The first one had a higher than normal pitched whine. Sent it in and they confirmed it was missing parts inside it and I was lucky it literally didn't blow up. Had about 4000 miles on it. This replacement was a full new kit. Less than 100 miles on it and the thing just seized. Just had to have the car towed back to the house during a tuning drive. Luckily it was only 5 miles away, but still was a mess around.
Some folks will say "should" have bought a Walboro. I have my reasons why I didn't go with them to include having a discussion with a Walboro engineer about what I am doing with the car and he suggested that their products wouldn't be a good choice plus I have heard Walboro and their are even noisier than AEM.
I have always had solid luck with Aeromotive. I should have just stuck with them in the first place, but was convinced to go AEM by my old tuning shop. I had had Walboro in the past and wasn't happy with how hot the fuel gets on return. Reduces efficiency too much for my build. Even the Walboro engineer I spoke with suggested that I go with their 190 instead of 255 however the 190 doesn't sustain high enough pressure during long boost runs for what I do.
I have just ordered an Aeromotive 11542 which on the plus side is both gas and e85. It will arrive Tuesday so I will need to pull out the AEM to do another return on it hopefully for another new kit. I will just sell the replacement on eBay or Facebook.
As if to add insult to injury while the car was being loaded on the tow truck we saw that my driver's side CV shaft boot was covered in grease. Looks like somehow I got a tear so am ordering another shaft. At least it is easy enough to change myself.
Sent from m-o-b-i-l-e
sqcompBack at home · Apr 21, 2016#188As an AEM user myself, I support your choice in not using their fuel products.
I was going to say Walbro, but Aeromotive is absolutely fine as well IMHO.
For me, using AEM for fuel would be like using AGP for a turbo instead of the big three (Borg, Garrett, or PTE). Yeah they have concentration on the part, but they're just a reseller.
fnkngrvThread starterIn The Hotbox · Apr 21, 2016#189I am really hoping AEM doesn't give me a tough time because it had been over a year since they shipped me the replacement in the first place. I just go the car back together. I could submit shop records and photos with timestamps to prove it, but we all know how manufacturers and storefronts get.
Sent from m-o-b-i-l-e
fnkngrvThread starterIn The Hotbox · Apr 21, 2016#190I feel their FIC6 is junk too. I had nothing but issues with mine.
Sent from m-o-b-i-l-e
LTHatchNewark NJ · Apr 23, 2016#191That's a shame to hear, at least the engine wasn't damaged when it failed. What's your theory on the cause of the CV boot being torn?
fnkngrvThread starterIn The Hotbox · Apr 23, 2016#192There is a small puncture hole so assuming while the car was torn down all that time and the car moving from my place to Dell's to his father-in-law's to Jason's gave a great opportunity for it to happen.
Sent from m-o-b-i-l-e
Paris turboathens · Apr 24, 2016#193how much power are you going to make and you sleeved the block? 350+?
fnkngrvThread starterIn The Hotbox · Apr 24, 2016#194Street tune is around 315 on pump gas. No water meth. Race tune we are shooting for as close to 450 as we can get on c12. May go e85 in the future as well.
Sent from m-o-b-i-l-e
fnkngrvThread starterIn The Hotbox · Apr 28, 2016#195Oh yeah...sorry. Yes the block is sleeved.
Sent from m-o-b-i-l-e
fnkngrvThread starterIn The Hotbox · May 7, 2016#196New fuel pump is in and man is it so much quieter than the AEMs. Low volume whistle, but very bearable and can't really be heard from outside the vehicle.
Sent from m-o-b-i-l-e
LTHatchNewark NJ · May 7, 2016#197Very nice, how was the install vs the AEM pump you had before?
fnkngrvThread starterIn The Hotbox · May 7, 2016#198Pretty similar. The Aeromotive unit fits more easily in the pump sleeve. The only noticeable difference otherwise is that the AEM part had a rubber cover that went over half of the bottom of the unit by the filter and the Aeromotive doesn't. That rubber piece kept falling off the AEM anyway and would float around inside my tank. It was a PITA.
Sent from m-o-b-i-l-e
LTHatchNewark NJ · May 7, 2016#199Thank you, one random question, C12 vs E85 on your setup(if you had easy access to both) which would you run most of the time and why?
fnkngrvThread starterIn The Hotbox · May 7, 2016#200I haven't run e85 as of yet so don't have an answer other than my entire setup is e85 capable and it is much cheaper. E85 is 105 octane and unleaded which is easier on the O2 sensors. The c12 is 108 octane which at higher boost is safer as far as detonation. Of course in today's age "higher boost" seems to be relative depending on who you talk to. Both fuels would require a completely different tune however the assumption is that e85 can net higher power especially wtq even though it needs 30% more fuel delivered.
Sent from m-o-b-i-l-e