Yarisworld Archive

TTR Yaris Turbo 2015 Updates

200 posts · 69,879 views · page 2 of 4

Replies continued

Focus_Sh1ftNew Jersey · Nov 18, 2015#51
Wow. Coming along nicely! 👍
fnkngrvThread starterIn The Hotbox · Nov 24, 2015#52
Originally Posted by LTHatch ↑
You seem to be the first in the Yaris community to do that with the manifold, did you figure out what the specs on the manifold will be?(runner length, runner width, plenum size) Completely off topic but i just noticed the carbon fiber valve cover, that looks fantastic! Paint or wrap or?
We will be designing runner length specifically tuned to my turbo and its powerband. The valve cover is hydrodipped CF. It will most likely actually be blasted and redone. I had some rubbing issues with my old IC piping.

Sent from my XT1575 using Tapatalk
fnkngrvThread starterIn The Hotbox · Nov 24, 2015#53
Originally Posted by tmontague ↑
awesome to see someone taking this one themselves. I'll definitely be following this and looking forward to seeing the progress.

I'd love to go boosted one day but it seems more of a headache for a DD. The Blitz SC is ideal but out of my price range for now.
Thanks. It has become a love/hate relationship now....haha.

Sent from my XT1575 using Tapatalk
fnkngrvThread starterIn The Hotbox · Nov 24, 2015#54
Little more progress. Turbo outlet side IC piping has been completed and test fitted along with the inlet piping.


Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Sent from my XT1575 using Tapatalk


Sent from my XT1575 using Tapatalk
fnkngrvThread starterIn The Hotbox · Nov 24, 2015#55
Originally Posted by Focus_Sh1ft ↑
Wow. Coming along nicely! Picture not included in this copy
Thanks bro

Sent from my XT1575 using Tapatalk
fnkngrvThread starterIn The Hotbox · Nov 24, 2015#56
Intake manifold starring to come together. All goes well it will be complete tomorrow.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Sent from my XT1575 using Tapatalk
LTHatchNewark NJ · Nov 25, 2015#57
That is bad ass! You sir are living the dream most of us wish we could afford lol.
fnkngrvThread starterIn The Hotbox · Nov 26, 2015#58
Intake manifold now almost completed. Super bummed that we have to keep the OEM orientation for it, but the damned alternator and Cam position sensor are in the way to pivot it to a passenger side entry. Stupid, but what can one do.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Sent from my XT1575 using Tapatalk
tmontagueCaledonia Ont. · Nov 26, 2015#59
Very nice work. How do you plan on mounting the TB to the intake manifold?
LTHatchNewark NJ · Nov 26, 2015#60
What size throttle body is that?
fnkngrvThread starterIn The Hotbox · Nov 26, 2015#61
Originally Posted by tmontague ↑
Very nice work. How do you plan on mounting the TB to the intake manifold?
We will be fabricating a custom mounting plate.

Sent from my XT1575 using Tapatalk
fnkngrvThread starterIn The Hotbox · Nov 26, 2015#62
Originally Posted by LTHatch ↑
What size throttle body is that?
76mm. I really wanted to pick up the Ross Racing unit, but don't have the 350 bucks for it in the budget. The mustang 5.0 TB would have been perfect since the EMSv2 already has calibrations built right in for it. Also lets be honest in that the Ross unit looks stupid sexy...lol



Sent from my XT1575 using Tapatalk
fnkngrvThread starterIn The Hotbox · Nov 27, 2015#63
Piping is complete end to end. Next step is fabbing the mounting plate for the throttle body.

Picture not included in this copy

Picture not included in this copy

Sent from my XT1575 using Tapatalk
MedMantleSouth Africa · Nov 28, 2015#64
Looking so awesome! Can't wait to see how the Drive by Cable is gonna work, would be an awesome mod for a lot of the N/A guys as well! :D
LTHatchNewark NJ · Nov 29, 2015#65
The progress is insane, the car will be done in no time at all at this pace. Any chance you can record a first start up video?
fnkngrvThread starterIn The Hotbox · Nov 29, 2015#66
Originally Posted by LTHatch ↑
The progress is insane, the car will be done in no time at all at this pace. Any chance you can record a first start up video?
We probably can. We will be renting a Dyno for an entire day to do the tune so will have videos from that for sure this time.

Sent from my XT1575 using Tapatalk
fnkngrvThread starterIn The Hotbox · Nov 29, 2015#67
We still have this stuff to knock out off the top of my head:

- TB mounting
- wastegate install
- dump pipe install
- finish AC
- finish radiator plumping and fan wiring
- battery relocation
- shift light install
- fluid change
- torque damper install (modification of cowl mounting plate required)
- full exhaust install


So plenty left to get done

-

Sent from my XT1575 using Tapatalk
fnkngrvThread starterIn The Hotbox · Dec 2, 2015#68
Had to have a local shop order the 1/2" thick aluminum for the custom TB mounting plate. Due to freezing rain the truck didn't make it today which was a bummer, but at least we were able to make the dry fitting of the new torque damper. Minor modifications required because of course nothing ever just fits. Need to hit up Fastenal tomorrow for extended grade 8 engine mount bolts to be able to shim the damper so that it isn't resting on the engine mount shock absorber.

Picture not included in this copy


Running into some fun with the TPS connector. The TPS for this TB uses a 3 wire connector; not 4 so I have been spending the last couple days trying terribly hard to find a connector with pigtail. It actually makes me wish again that I just bought the Ross Racing TB, but I digress. The skinny is that you have 3 options for Yota TPS connectors; you wait forever for the always out of stock connector from Standard Motor Products, buy a full harness on eBay and then try to sell off the rest of the harness you don't need, or pay someone thru the nose for the single connector. I am ending up with the 3rd option in the interest of time and convenience.

Sent from my XT1575 using Tapatalk
ilikericesavannah, ga · Dec 3, 2015#69
bad ass intake mani you got there...

Have you ever told your wife that you were getting a Mani and she got excited and said she wanted to go with you. So you took her to a fabricator machine shop? hehe
fnkngrvThread starterIn The Hotbox · Dec 3, 2015#70
Originally Posted by ilikerice ↑
bad ass intake mani you got there...

Have you ever told your wife that you were getting a Mani and she got excited and said she wanted to go with you. So you took her to a fabricator machine shop? hehe
I am currently divorced. She has told me if we were still married that she would have divorced me again over the car....hahaha

Sent from my XT1575 using Tapatalk
fnkngrvThread starterIn The Hotbox · Dec 3, 2015#71
Intake manifold is now completed with exception of the vacuum bungs, final internal porting, and powder coating.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Sent from my XT1575 using Tapatalk
tmontagueCaledonia Ont. · Dec 4, 2015#72
excellent work, the manifold looks nice. I can't remember if you already answered this, but what are you using for engine management?
fnkngrvThread starterIn The Hotbox · Dec 4, 2015#73
Originally Posted by tmontague ↑
excellent work, the manifold looks nice. I can't remember if you already answered this, but what are you using for engine management?
Thank you.

AEM EMSv2 with a custom built Dezod Motorsports harness.

Sent from my XT1575 using Tapatalk
tmontagueCaledonia Ont. · Dec 4, 2015#74
That is a full standalone unit I'm assuming?

Looking forward to it starting up, should be some impressive power coming out of it
fnkngrvThread starterIn The Hotbox · Dec 4, 2015#75
Originally Posted by tmontague ↑
That is a full standalone unit I'm assuming?

Looking forward to it starting up, should be some impressive power coming out of it
Yes this unit is a full stand alone. The one thing about most builds is that people leave the drive by wire and place and they still use the MAF sensor. If that is the case then you're actually using it as a piggyback. You are still having the stock ECU handle some signaling. As of last year my build was 250 to the wheels and I was running my drive by wire throttle body still. This year I've made the switch over to cable plus the fact that I got rid of the MAF all together last year. I am looking for a great increase in potential as I have made solid jumps inflow from the turbo to the head as well as the exhaust manifold to the end of the exhaust itself. The head has an excellent port on it and has just been waiting to get the flow that it deserves.

Sent from my XT1575 using Tapatalk
LTHatchNewark NJ · Dec 4, 2015#76
The whole setup is looking good, real frightening. Whats the weakest link in your Yaris after the new upgrades? Can't wait to see what you guys do with the downpipe/wastegate routing.
fnkngrvThread starterIn The Hotbox · Dec 4, 2015#77
Since I have the TRD dogbone and the torque damper the CV shafts should be fine. I still have a stock trans and even tho I now have that 6 puck ACT stage III clutch that could be an issue. An engineer from ACT pretty much said flat out that over 300tq and I will need a truly custom clutch assembly because he doesn't think it will hold up over the long haul at the duration I will be running with high rpm shifts. Guess only time will tell. Garm's axles as well as a few of the folks I have talked with from PTR held up fine with mid 300s. Chew I believe is still running stock axles on his 500+whp build.

Sent from my XT1575 using Tapatalk
LTHatchNewark NJ · Dec 4, 2015#78
Well that's what you get for being one of the Yaris platform pioneers lol. Who's going to tune your Yaris after you're completely done?
fnkngrvThread starterIn The Hotbox · Dec 4, 2015#79
Originally Posted by LTHatch ↑
Well that's what you get for being one of the Yaris platform pioneers lol. Who's going to tune your Yaris after you're completely done?
I and my buddy will be. The plan is to head to the Dyno down state and rent it for a day. Then sadly it will be put into storage until we move in a couple months. I sold my winters and the falken 912s aren't very good in sub 30° weather.

Sent from my XT1575 using Tapatalk
LTHatchNewark NJ · Dec 4, 2015#80
Are you going to record the dyno runs as well?
fnkngrvThread starterIn The Hotbox · Dec 4, 2015#81
Originally Posted by LTHatch ↑
Are you going to record the dyno runs as well?
Yes we do plan on doing so if all goes well.

Sent from my XT1575 using Tapatalk
fnkngrvThread starterIn The Hotbox · Dec 7, 2015#82
Originally Posted by LTHatch ↑
The whole setup is looking good, real frightening. Whats the weakest link in your Yaris after the new upgrades? Can't wait to see what you guys do with the downpipe/wastegate routing.
Per your request. The wastegate is mounted on the manifold directly below the turbo. The dump pipe routing as you can see comes out and will dump in front of the transmission as a screamer pipe. The pipe has a mounting bracket that will allow it to move with the trans/motor during load. We will have to cut a hole in my MI underpanel. We had kicked around the idea of porting it out of the front fender right behind the driver's headlight, but the shape of the headlight housing itself made that pretty dicey. I am a bit bummed about it to be honest because I think that it would be fun to spit fire out of the side of the car, but alas just not in the cards. It would have also been a PITA if we did that as soot would run the side of the car.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy



Sent from my XT1575 using Tapatalk
fnkngrvThread starterIn The Hotbox · Dec 7, 2015#83
We were going to custom fab up the battery kit, but in the efforts to cut time I instead picked up this kit from Taylor Cable. The good thing about this is that since it is 8.1 certified with NHRA the LSRs will accept it as well.

Picture not included in this copy

Sent from my XT1575 using Tapatalk
LTHatchNewark NJ · Dec 7, 2015#84
That's a creative way of routing the dump tube in that small amount of space, she's going to make all kinds of scary noises.
Thank you for the pictures,is the fuel line/wiring loom/coolant lines that close to the dump tube or is it just the pictures?

EDIT: Are you going to use a stock sized battery with that relocation?
fnkngrvThread starterIn The Hotbox · Dec 7, 2015#85
Originally Posted by LTHatch ↑
That's a creative way of routing the dump tube in that small amount of space, she's going to make all kinds of scary noises.
Thank you for the pictures,is the fuel line/wiring loom/coolant lines that close to the dump tube or is it just the pictures?

EDIT: Are you going to use a stock sized battery with that relocation?
Because of everything right now being dry still doing work the fuel lines and wire loom are not in their final positions.

As for the battery no its not a stock size battery. it's actually a different battery which is smaller however still somewhat heavy due to the fact that it will provide me the additional amp hours needed to drive all of my extra electronics compared to what a racing battery would do. I got a great deal so pulled the trigger a few months ago:

http://www.amazon.com/Kinetik-HC800-.../dp/B000LUDEOI

We plan to mod the Taylor box to drop the size and conserve space in the trunk.

Sent from my XT1575 using Tapatalk
fnkngrvThread starterIn The Hotbox · Dec 9, 2015#86
New Intake Manifold has been 100% completed as well as the throttle body being plumbed. Pretty pumped about this. Also a sneak peak of the new color scheme. The "satin black" appears to be much more of a gunmetal pearl, but it is starting to grow on me. The purple is in honor of the other half as it is her favorite color. Who knows if she will like it tho since she has grown to really dislike the car....haha.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
tmontagueCaledonia Ont. · Dec 9, 2015#87
Is your fuel in line on the opposite side as stock or did you add a fuel return line?
fnkngrvThread starterIn The Hotbox · Dec 9, 2015#88
Originally Posted by tmontague ↑
Is your fuel in line on the opposite side as stock or did you add a fuel return line?

we ran a new braided line for the fuel inbound and used the stock line for the return. that is the standard setup for folks that upgrade the system on these cars.
fnkngrvThread starterIn The Hotbox · Dec 9, 2015#89
So close to firing the sleeping dragon we can taste it.

Exhaust piping arrived to day:


Picture not included in this copy


Quick and dirty of the remaining items:

- valve cover blast and coat
- coil pack vanity cover
- install new valve cover stainless bolts
- finish battery reloc
- finish wiring for hot side AIT sensor
- finish exhaust
- install shift light


Picture not included in this copy

Picture not included in this copy

Picture not included in this copy


Sent from my XT1575 using Tapatalk
tmontagueCaledonia Ont. · Dec 9, 2015#90
Can't wait to hear it fire up, looking forward to the videos of that happening

what is that second smaller looking airfilter located near you intake filter?

Second Q is why do you run a return fuel line vs how it's set up stock with no return line? I'm assuming it has something to do w/ the extra fuel pressure you need to run with the larger injectors.
fnkngrvThread starterIn The Hotbox · Dec 9, 2015#91
Oil catch can.


When you go boosted the rule of thumb is 1psi of fuel pressure per 1psi of boost. The fuel pump delivers more fuel to the engine than it actually needs in this scenario. The excess fuel is then routed back to the fuel tank through a pressure regulator and return line.

A returnless fuel injection system, by comparison, manages fuel pressure a little differently. Instead of using a spring-loaded vacuum diaphragm in the regulator to change fuel delivery when throttle opening and intake vacuum change, the regulator in a returnless system operates at a constant pressure.*

Sent from my XT1575 using Tapatalk
tmontagueCaledonia Ont. · Dec 10, 2015#92
Thanks for the explanation, makes sense.

For the oil catch can, would the breather filter on it not cause a vacuum leak as it is no longer a closed system?
fnkngrvThread starterIn The Hotbox · Dec 10, 2015#93
Originally Posted by tmontague ↑
Thanks for the explanation, makes sense.

For the oil catch can, would the breather filter on it not cause a vacuum leak as it is no longer a closed system?
No. The pressure needs to either recirc or vent to atmo. When you aren't using a catch can to collect blow by the pcv handles it.

Sent from my XT1575 using Tapatalk
tmontagueCaledonia Ont. · Dec 10, 2015#94
I see. Are you using the vacuum line that runs from the pcv to feed your catch can? And if so did you remove your pcv or do you still have it installed?

I'm currently running a catch can from my pcv line with the pcv still installed which feeds back into the intake manifold (no breather filter so it's a fully closed system). Catches about an ounce or so per 10,000km. I'm curious as to how you have yours set up w/ all the extra boost
LTHatchNewark NJ · Dec 10, 2015#95
My lord, look at that! Traction is only going to be a dream after that monster fires up lol. Judging by how fast you guys are building her, this will be one heck of a gift for yourself and the community. Can't wait to see how the down pipe and exhaust will look!
Focus_Sh1ftNew Jersey · Dec 10, 2015#96
Originally Posted by fnkngrv ↑
Picture not included in this copy


Incredible, can't wait to see her in action!

Traction is only going to be a dream after that monster fires up lol
Definitely a good point. How are you going to handle it? Does the EMS have traction control?
fnkngrvThread starterIn The Hotbox · Dec 10, 2015#97
Originally Posted by Focus_Sh1ft ↑


Incredible, can't wait to see her in action!



Definitely a good point. How are you going to handle it? Does the EMS have traction control?
It will be a learning curve no matter what with the conversion to cable TB since it will be instant throttle response. I know that when Garm took me for a ride he was having difficulty hooking up to a point with his LB. AFAIK his LB actually had a Motec EMS and not AEM so that may have been a contributing factor. There are still a ton of features I have not tapped into with my EMS.

Sent from my XT1575 using Tapatalk
fnkngrvThread starterIn The Hotbox · Dec 10, 2015#98
Originally Posted by LTHatch ↑
My lord, look at that! Traction is only going to be a dream after that monster fires up lol. Judging by how fast you guys are building her, this will be one heck of a gift for yourself and the community. Can't wait to see how the down pipe and exhaust will look!
Downpipe was already completed.

As for exhaust the middle 4' with the cat will be v-banded so that when I race I can remove it and put on a 75° dump tip instead. I had kicked around doing an electronic cutout but after tons of research decided to ditch the idea.

Sent from my XT1575 using Tapatalk
LTHatchNewark NJ · Dec 10, 2015#99
Ahh you're right, barely can see it with the wrap on it. What muffler/resonator are you going with?
fnkngrvThread starterIn The Hotbox · Dec 10, 2015#100
Originally Posted by LTHatch ↑
Ahh you're right, barely can see it with the wrap on it. What muffler/resonator are you going with?
Bbbwwwuuuuhahahahahaha.


Oh you were serious ;-)


None. Only will have the Vibrant cat and straight pipe.

Sent from my XT1575 using Tapatalk