Eduardo_mtyOriginal postOct 11, 2014#1I bought this oem parts,And i will tray to install it tomorrow.
Picture lost · tapatalk.imageshack.com
I will use your DIY, for 2007 if i remember well.
I will update with pictures, this post.
I hope this Work well.
Any tips, i will be appreciated
Replies 17
CTScottUSA, CT · Oct 11, 2014#2Eduardo_mtyThread starterOct 11, 2014#3Thank you ctscott. I will do today around 17 hrs
CTScottUSA, CT · Oct 11, 2014#4 Originally Posted by
Eduardo_mty ↑ Thank you ctscott. I will do today around 17 hrs
Out of curiosity, what did you pay for the parts? It also looks like they sold you two separate harnesses and you only need one or the other.
Eduardo_mtyThread starterOct 11, 2014#5First doubt... No screws taked the Air bags... Only this "wire" with hook.
I paid around $110 usd
CTScottUSA, CT · Oct 11, 2014#6 Originally Posted by
Eduardo_mty ↑ First doubt... No screws taked the Air bags... Only this "wire" with hook.
I paid around $110 usd
Correct. The 3rd gen has spring clips to mount the airbag. The first thread that I linked above shows them.
I could have saved you quite abut on that price.
Eduardo_mtyThread starterOct 11, 2014#7CTScottUSA, CT · Oct 11, 2014#8Where do the beige and brown wires go (from the white connector)?
Also, check the steering column connector to see if beige and brown wires are present in the black connector, next to the yellow airbag connector.
Eduardo_mtyThread starterOct 11, 2014#9Eduardo_mtyThread starterOct 11, 2014#10I connect the batery And puede the switch on, push the the stalk and the image on the panel turn on (green light)
Eduardo_mtyThread starterOct 11, 2014#11ctscott, thank you for your help, i think this Work.
Eduardo_mtyThread starterOct 11, 2014#12Ctscott, do you think, i will check anything before use/test it
Eduardo_mtyThread starterOct 12, 2014#13I did a short drive, around 3 - 4 minutes, to check if the Cluster show any warning . And all ok
CTScottUSA, CT · Oct 12, 2014#14 Originally Posted by
Eduardo_mty ↑ I did a short drive, around 3 - 4 minutes, to check if the Cluster show any warning . And all ok
Very good. As long as you see the cluster light illuminate and don't have the airbag light stay on, you are good to go.
jcboyAsia · Oct 12, 2014#15 Originally Posted by
Eduardo_mty ↑ I found this
Originally Posted by
CTScott ↑ Correct. The 3rd gen has spring clips to mount the airbag.
Our 2nd gen MMC steering wheels also have spring clips only too, there are just covers on each side to have access to them.
Too bad i dont think we have cruise control available in our ECUs.
Picture lost · www.fastmotoring.com Eduardo_mtyThread starterOct 12, 2014#16i did a drive around 10 kms, and cruise control works.
one doubt, when i drive around 40 kms and try to Set the Cruise, but dont work, but when i go around 65 kms, it work.
CTScottUSA, CT · Oct 12, 2014#17 Originally Posted by
Eduardo_mty ↑ i did a drive around 10 kms, and cruise control works.
one doubt, when i drive around 40 kms and try to Set the Cruise, but dont work, but when i go around 65 kms, it work.
The minimum speed for cruise control to "set" is 25 MPH, so that's just about right for the threshold you are seeing.
Eduardo_mtyThread starterOct 12, 2014#18Thank you