Yarisworld Archive

The Official Toyota Thailand Accessories Order Thread

415 posts · 93,443 views · page 8 of 9

Replies continued

eijikikimaruSo. CaL · Jun 27, 2007#351
Not your fault Thomas... we here over in the US should have double checked with the picture you provided for us.

I'll figure out a way... and if it's easy I'll let you guys know...
tk-421Dagobah · Jun 27, 2007#352
Here's to hoping I have the same mirrors as eTiMaGo's! 😉
Is there any way to check on my shipment's status, Thomas?
eTiMaGoThread starterBangkok, Thailand · Jun 27, 2007#353
Originally Posted by tk-421 ↑
Here's to hoping I have the same mirrors as eTiMaGo's! 😉
Is there any way to check on my shipment's status, Thomas?
Yes, I wonder if it's a 3-door/5-door thing, or a difference by country of manufacture...

You could try that tracking number in the mexican post office website, it might tell you the name of the donkey on whose back the box is 😁
eijikikimaruSo. CaL · Jun 27, 2007#354
Originally Posted by eTiMaGo ↑
Yes, I wonder if it's a 3-door/5-door thing, or a difference by country of manufacture...

You could try that tracking number in the mexican post office website, it might tell you the name of the donkey on whose back the box is 😁
LoL
ViolinNew Jersey · Jun 27, 2007#355
This is my left side - but it would seem I'm in the same boat.

Picture not included in this copy

Picture not included in this copy
ViolinNew Jersey · Jun 27, 2007#356
I'm thinking clear silicone caulk is in order.

I'll play around with mine this weekend.
Sway84Toronto Ontario Canada · Jun 27, 2007#357
that sucks... and i was seriously thinking of gettin em... :S...ill wait till i see them here from uncle yaris
vodkalushRochester, NY · Jun 27, 2007#358
i'm thinking of simply removing my clips and then epoxying them in the correct spot, but i'm not sure if i'll be able to do it till nxt week....
blacksanVirginia · Jun 27, 2007#359
I didn't purchase the covers myself, but am curious of 3M double sided tape would work in this application? If so it would be plenty strong enough and could be removed in the event of a repair with out damage and minimal clean-up.
vodkalushRochester, NY · Jun 27, 2007#360
I tried relocating the tabs without much success... so i just snipped them off and applied 3m decal/trim adhesive (almost like rubber cement) and it looks like should i need to go into the mirrors that it will just require alittle clean-up.

ill post too let you all know in a few days weither or not the mirror covers are still on, and about that time i'll actually wire them up...
blacksanVirginia · Jun 27, 2007#361
Could the inner piece/mating surface be purchased to allow the use of the tabs?
eTiMaGoThread starterBangkok, Thailand · Jun 27, 2007#362
Originally Posted by blacksan ↑
Could the inner piece/mating surface be purchased to allow the use of the tabs?
That would be pretty much the whole mirror assembly, and who knows if it's even compatible with the rest of the car...
uncleyarisToronto · Jun 27, 2007#363
Wait to see vodka's luck. Violin had a point too. Maybe remove the tabs and adhere them to the ones you want to replace!
cm07yarisAppleton, WI · Jun 29, 2007#364
eTiMaGo, what are the openings on the gauge pod? 1- 3 3/8" (85.7mm) and 2- 2 1/16" (52.4mm)? Can this be connected to the dash in any manor, ie velcro, double sided tape, screws, etc? How much would shipping be for the empty pod to 54911 or do I have to wait for another group buy? Thanks in advance!

EDIT: I re-read the first page on shipping.
cm07yarisAppleton, WI · Jul 1, 2007#365
Anyone on the opening sizes?!🤷
eTiMaGoThread starterBangkok, Thailand · Jul 1, 2007#366
Originally Posted by cm07yaris ↑
eTiMaGo, what are the openings on the gauge pod? 1- 3 3/8" (85.7mm) and 2- 2 1/16" (52.4mm)? Can this be connected to the dash in any manor, ie velcro, double sided tape, screws, etc? How much would shipping be for the empty pod to 54911 or do I have to wait for another group buy? Thanks in advance!

EDIT: I re-read the first page on shipping.
Yes, that sounds about right for the sizes, I measured them with a ruler at first:

Center hole: 9cm (a little more than 3.5")
Side holes: 5cm (2")
eTiMaGoThread starterBangkok, Thailand · Jul 1, 2007#367
For those who had not noticed the other thread, here is Violin's solution for the side mirrors:

DIY: LED side mirror installation

👍
PushGeorgia · Jul 1, 2007#368
Notice how the yaris in thailand has no yellow blinker in the headlight on the sedan. I want to do that with mine here and get yellow bulbs.. That bumper for the sedan is hotness. does it light up?
eTiMaGoThread starterBangkok, Thailand · Jul 2, 2007#369
what you have is not actually a blinker, but a reflector, a mandatory safety device in the US so that the car is easier to see at night or whatever.

The red things on the back bumper here are the same, just reflectors, not lights of any kind.
Sway84Toronto Ontario Canada · Jul 2, 2007#370
but those reflectors are sooo sexy lol... and it changes the form of the bumper just because of those reflectors
eTiMaGoThread starterBangkok, Thailand · Jul 2, 2007#371
hahahah well go to a stationery store, find some red 3M reflective tape, cut to shape, and there you go!
vodkalushRochester, NY · Jul 2, 2007#372
Yhaaaa, my side mirrors are still on after about 600miles and some of which where over flood damaged roads (pot holes galore) and about 40miles of dirt roads... also they held-up through some night time fog with rain. So no worries :)

I'm gonna wire them up tonight (hopefully)
AdriaanMontreal · Jul 3, 2007#373
is there gonna be another one gb buy any time soon need to get some stuff for a birthday gift to me from me.
OxyG3nEMontreal , Quebec , Canada · Jul 3, 2007#374
lolll you can buy every month :p
eTiMaGoThread starterBangkok, Thailand · Jul 4, 2007#375
I'm afraid I will no longer be organizing group buys, please click the link in my signature for more info.
yrsdrgnSF,CA · Jul 4, 2007#376
Quick. find some buddy of yours who also drives a nice Yarii to start doing group buys for us as you help him manage them!!!! haha
ROCKLANDTOYOTAROCKLAND TOYOTA/SCION · Jul 4, 2007#377
hopefully everyone got their items that was purchased......
uncleyarisToronto · Jul 4, 2007#378
Although I didn't buy, I want to thank you thomas for the efforts you have gone through for guys around here. Very sad to see you leave, but understand. The community will be less without you. Vodka thanks as well!!
JerkrattFair Lawn, NJ · Jul 5, 2007#379
as far as i understnad we are getting this last gb and thats it from him for the gb's
ViolinNew Jersey · Jul 5, 2007#380
Did everyone else receive a bonus Thai stick with their order, or was that just me?
eTiMaGoThread starterBangkok, Thailand · Jul 5, 2007#381
Originally Posted by Violin ↑
Did everyone else receive a bonus Thai stick with their order, or was that just me?
Really? What color was it? I have a bad feeling it was meant to go to someone else who ordered it along with the stuff... 😕

PS I think I misread that as a YarisWord sticker 😛

I think there was a "Sakura" sticker in all of the mirror cover boxes...
JerkrattFair Lawn, NJ · Jul 5, 2007#382
thai stick?
vodkalushRochester, NY · Jul 5, 2007#383
Originally Posted by eTiMaGo ↑
Really? What color was it? I have a bad feeling it was meant to go to someone else who ordered it along with the stuff... 😕

PS I think I misread that as a YarisWord sticker 😛

I think there was a "Sakura" sticker in all of the mirror cover boxes...

yah i got a Sakura sticker... its a lil big for my taste though....
ROCKLAND TOYOTAROCKLAND COUNTY NY · Jul 5, 2007#384
Originally Posted by Jerkratt ↑
thai stick?
you smoke yet you don't know?????👎
ChinoCharlesOH · Jul 5, 2007#385
Originally Posted by Violin ↑
Did everyone else receive a bonus Thai stick with their order, or was that just me?
🤣 Lucky!
tk-421Dagobah · Jul 5, 2007#386
I just got back from the post office with my package! Everything looks OK, except for one of the pegs on the tail lights that broke during shipping (no biggie).

The muffler cutter is a lot bigger in person. I am really psyched with it! The pedal set looks great as well. The rear step guard is smaller than I thought (I'm thinking that is due to the fact that the JDM bumpers are smaller).

I did get a Sakura sticker, but I don't think I'll be putting it on the car. I really should've ordered a YW sticker, though...

Now, if I only had a car to put these accessories on... Still have to wait a couple of weeks for my baby to come back to me. 😢

You da man, Thomas! 👍
JerkrattFair Lawn, NJ · Jul 6, 2007#387
wait is this from the newest group buy?
tk-421Dagobah · Jul 6, 2007#388
Originally Posted by Jerkratt ↑
wait is this from the newest group buy?
Nope... the 1st one!
Shows ya how effective Mexican postal service is... 🤘
JerkrattFair Lawn, NJ · Jul 6, 2007#389
o wow... wheres the link for the second group buy? on the first page?
ROCKLAND TOYOTAROCKLAND COUNTY NY · Jul 7, 2007#390
I THOUGHT THIS WAS A DONE DEAL?????
ShroomsterOrlando · Jul 7, 2007#391
1st GB is done and so is the second one...seach or click on eTiMaGo 's name he is going to be working full time again and doesn't have time to do any more group buys.....
JerkrattFair Lawn, NJ · Jul 7, 2007#392
yeah i know i order threw the second one but i cent find the tread
JerkrattFair Lawn, NJ · Jul 10, 2007#394
thanks
mrbondIllinois · Mar 16, 2009#395
Hey, eTiMaGo, I know this thread is almost 2 years old, but would it still be possible to get one of those TRD replica gauge cluster housings?
tk-421Dagobah · Mar 17, 2009#396
Thanks for bumping this thread... Brought back some memories... 😁
yarisugiハワイ · Mar 17, 2009#397
Originally Posted by mrbond ↑
Hey, eTiMaGo, I know this thread is almost 2 years old, but would it still be possible to get one of those TRD replica gauge cluster housings?
Me, too! Me, too!
tk-421Dagobah · Mar 17, 2009#398
I hope Thomas doesn't mind me posting this, but here it goes... 😳

Those gauge housings are for RHD cars. I bought one of those a while ago and I've always wanted to use it as a base design (not a mold).
I can get those housings made in high quality fiberglass and painted with either a matte or glossy finish with the correct LHD orientation if you guys are interested, but I need a few more ppl to be willing to commit in order to do a full production run.
eTiMaGoThread starterBangkok, Thailand · Mar 17, 2009#399
yeah to be honest as it turned out, installing those was a real PITA for whoever bought them. tk-421 has some awesome ideas for a similar design that would work way better for you guys!
JerkrattFair Lawn, NJ · Mar 17, 2009#400
i still have one from the group buy if anyone is interested.. it is the RHD one tho