Yarisworld Archive

Thailand OEM/Aftermarket Accessories and Bodykits GB Round 2!

119 posts · 110,279 views · page 1 of 3

eTiMaGoOriginal postBangkok, Thailand · Jun 7, 2007#1
Here we go guys, time for a second round.

This is how it's gonna work, for the most part it will be just like the first round, so please take a look again:

The Official Toyota Thailand Accessories Order Thread

The main difference is that I need to bring up the price a little bit on the OEM Toyota stuff. The previous round, I did not take into account several factors (Paypal fees, and their crappy exchange rate), and basically made a bit of a loss.

Secondly, shipping costs will be a bit different. I'll follow the same system of a percentage deposit, but with a few differences. If you order a single, bulky item (i.e. a set of tail lights only), I will take a little more for the shipping. If you buy more, smaller items, they can be shipped for relatively less, so I'll need a smaller deposit. Anyway, just let me know what you want, and I'll work out the shipping.

OEM Toyota Accessories

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

And for the sedan:

Picture not included in this copy

Many of the LB's interior accessories should also fit the sedan.

There's actual photos of most of these items here:
The Official Toyota Thailand Accessories Order Thread

Aftermarket Accessories

LED side mirrors:
Picture not included in this copy
Picture not included in this copy
$125 per pair

WARNING!!! There is a slight difference between the USDM side mirrors and these, they will not be a direct replacement, we are still working out the best way to do this, but it should not be too difficult.

These are pre-painted, but only in our locally available colors, here's a matching guide:

Picture not included in this copy

The paint codes in BOLD are an exact match, and I've put what would be the closest match for some other colors. The closest match colors may look good, they may look mis-matched, there's no way to know right now. If you have one of those mis-matched colors, you should try to get the closest one, and if it does not look good, I guess your best choice would be to have them re-painted locally. Or, if you also get a bodykit and choose to have it painted, they can probably also re-paint these to match.


Replica Modelista-style JDM LED lights:
Picture not included in this copy
US$180 per pair

Black Tinted "Altezza" LED lights:
Picture not included in this copy
US$190 per pair

Replica TRD gauge cover for the driver glovebox
Picture not included in this copy
$85 (cover only)
$220 (with no-name gauges)

Replica Netz (lightning)Logos for front and back
Picture not included in this copy
$35 (front)
$25 (back)

Replica Vitz and RS badges
Picture not included in this copy
$15 (Vitz)
$35 (RS)

And some pictures of the actual items:
The Official Toyota Thailand Accessories Order Thread

Replica Bodykits

Now here comes the juicy part!
*Please Read This!*
As mentioned in another thread, these FRP replica bodykits can be obtained in two grades. Grade A is almost as good as the original JDM kits and should be able to fit with minimal headache. They are made by a very reputable shop. Grade B is a lot cheaper, but may not be as solid, and may require some trimming of the pieces in order to get a good fit, so their installation may be a little more difficult, and the results not quite as aesthetically pleasing. Essentially, you get what you pay for.
For people in North America, please keep in mind that fitting these will require you to remove the rear bumper brace, and quite possibly the front one too, as your bumpers are quite a bit deeper than ours.
If needed, painting can be arranged (but is not recommended as it may possibly scratch during shipping), at an extra cost of $500 for a full kit. This will be done with Dupont 2K paint, and we will require you to send us the tow hook cover from your front bumper (that little round plug), so that the shop can get the best possible paint match.

As a start, we will be offering the following sets:

C-ONE Style:
Picture not included in this copyPicture not included in this copy

Grade A: $1200 unpainted, 5 piece kit (front bumper, rear RS bumper, rear skirt, side skirts, spoiler)
Grade B: $800 unpainted, 5 piece kit (front bumper, rear RS bumper, rear skirt, side skirts, spoiler)

Ings+1 Style:
Picture not included in this copyPicture not included in this copy

Grade A: $1200 unpainted, 4 piece kit (front bumper, rear bumper, side skirts, C-ONE style spoiler)
Grade B: $550 unpainted, 3 piece kit (front bumper, rear bumper, side skirts, NO SPOILER)

Burnout KD-VII Style:
Picture not included in this copyPicture not included in this copy

Grade A: $1300 unpainted, 6 piece kit (front bumper, rear RS bumper, rear corner skirts, side skirts, C-ONE style spoiler, eyelids)
Grade B not available for this bodykit.

Pricing breakdown for individual pieces
Let's say you only want a C-ONE front bumper, or you want to mix and match different styles/grades...

GRADE A:
C-ONE/Ings+1/Burnout Front bumper + mesh: $450
RS Front Bumper + Grille + Fog lights + Netz badge: $700
RS or Ings+1 Rear Bumper + Fog lights + licence plate lights: $600
Side Skirts (per pair): $320
C-ONE/Burnout Rear skirt: $160
RS/C-ONE Roof Spoiler: $160
Burnout eyelids: $100

GRADE B:
C-ONE/Ings+1 Front bumper + mesh: $250
RS Front Bumper + grille + Fog lights + Netz badge: $500
RS or Ings+1 Rear Bumper + Fog lights + licence plate lights: $350
Side Skirts (per pair): $200
C-ONE Rear skirt: $100
RS/C-ONE Roof Spoiler: $120


-------------------------------------------------------
The fine print:
If we can get 3 sets of a particular style and grade of bodykit, we'll be able to get a discount and thus offer 10% off.
Estimated shipping prices with door-to-door delivery for one bodykit would be $500 by air freight, or $200 by sea freight. You would be responsible for any customs charges, though, but we can undervalue the invoice to keep this to a minimum.
Please understand that you would be buying these at your own risk, any painting, fitting, and installation are at your own expense. I will inspect each piece before shipping to verify there is no damage, but once they are shipped, that will be out of my control.
At the moment we are unable to confirm whether side skirts will fit correctly on 3-door models. It is most likely some modification of the skirt (grinding away of material or fabrication of a bracket) is needed.

---------------------------------------------------------
How to order
It's getting difficult to deal with a lot of PMs, so I'd prefer if you could communicate by email at etimago@gmail.com
Please let me know which items you are interested in buying, and I will get back to you with a quotation including estimated shipping price. If that is acceptable, then let me know and a Paypal invoice will be sent to you.

For smaller items (smaller than spoilers), we will do a group shipping as usual, so we'll set the payment deadline as the 30th of June.

For larger items (spoilers and body kits), we would ship individually anyway, so the faster the better. There will be a 1 to 2-week lead time for the shop to produce the kit if they do not have it in stock.

All right, I think that covers it, feel free to bombard this thread with questions 😁

Replies 118

tk-421Dagobah · Jun 7, 2007#2
Very nice... 🤤

Some friendly questions:
  1. Which shipping carrier will you be utilizing?
  2. How many of each body kit model do you have in stock at the moment?
  3. Which "grade" kits are the ones in the pictures (quality-wise)?
ASHRAFHouston, TX · Jun 7, 2007#3
excellent thomas

that is really a good job

now I'm lil confused with the kits

the c-one is my best till now

I'll get to u as soon as I decide

cYa
ASHRAFHouston, TX · Jun 7, 2007#4
BTW Thomas, Any idea about shipping prices to Australia?
eTiMaGoThread starterBangkok, Thailand · Jun 7, 2007#5
Originally Posted by tk-421 ↑
Very nice... 🤤

Some friendly questions:
  1. Which shipping carrier will you be utilizing?
  2. How many of each body kit model do you have in stock at the moment?
  3. Which "grade" kits are the ones in the pictures (quality-wise)?
1) Standard air or sea freight, through a shipping company, with door-to-door service. Wanted to go for DHL, but they're too expensive, and their slower shipping options are not available to the general public.
2) I don't have any in stock, this is entirely on demand. Though I think I will get a Burnout set for myself 🙂
3) The pics are from the Grade A shop. Strangely enough, the Grade B shops refer to generic pictures from the original companies...
ChinoCharlesOH · Jun 7, 2007#6
Thomas... you're the man. Period.

In the interest of making this easy on Thomas and his bulging PM box, feel free to shoot me any questions as well. I'll answer what I can or find out from the man himself. I talk to him enough about this stuff to basically understand what is going on.

Frenchy, I call dibs on your stock RS bumper if you're parting with it. 😎
NutzoidsPhiladelphia · Jun 7, 2007#7
Thomas, you really are my hero!

I'll take the Taillights and the Turn Singles!

I’m easy (Black Sand Pearl)

😈
eijikikimaruSo. CaL · Jun 7, 2007#8
Thomas, will these kits sideskirt fit the US 3door liftback? I know you mention some detachment maybe require for front and back but I didn't see it mentioned in your explanation about the side, so it raised an eyebrow.

If it does fit, can we mix part A with part B??? i.e. ING kit. Grade "A" Front and rear but Grade "B" Side?
OxyG3nEMontreal , Quebec , Canada · Jun 7, 2007#9
its not illegal to remove the rear bumper brace? and the exact term is ? REAR BUMPER REINFORCEMENT ?
eTiMaGoThread starterBangkok, Thailand · Jun 7, 2007#10
Originally Posted by Nutzoids ↑
Thomas, you really are my hero!

I'll take the Taillights and the Turn Singles!

I’m easy (Black Sand Pearl)

😈
Sure, but which style of tail lights are you interested in?

Originally Posted by echo_hrs ↑
The Grade A Replica Vitz RS Bumpers, are they $180 each ? So $360 for the front and rear set ?

I'm defo interested if we can get the prices for the RS rear lenses, and RS front fogs (or find out if the regular fogs will fit...)

I didn't put up the RS bumpers in this thread because I haven't confirmed the pricing and included accessories, but as soon as I know, I'll put it up.

Cheers
Originally Posted by eijikikimaru ↑
Thomas, will these kits sideskirt fit the US 3door liftback? I know you mention some detachment maybe require for front and back but I didn't see it mentioned in your explanation about the side, so it raised an eyebrow.

If it does fit, can we mix part A with part B??? i.e. ING kit. Grade "A" Front and rear but Grade "B" Side?
Side skirts are not a problem, they are the same size.
Mixing and matching is possible, but the individual pieces are more expensive than when in a set, so it won't bring you much savings...

Originally Posted by OxyG3nE ↑
its not illegal to remove the rear bumper brace? and the exact term is ? REAR BUMPER REINFORCEMENT ?
I'm not sure if it is illegal, but it is at your own risk. I'm also trying to see if we can get the OEM reinforcements from over here, for added peace of mind.
joey1320Lakewood, Ohio · Jun 7, 2007#11
is there a way to get the front lip like the one you had?

please let me know what the price would be for that, if available, thanks!
ism3tSouthern California · Jun 8, 2007#12
dont know where your getting your info on the sides but the 5 door sides WILL NOT fit on the 3door. it takes MAJOR alteration for it to even look slightly good. That being said, those are some of the BEST prices i have ever seen for the kits, and not to shake a fist or anything since it was almost 6 months ago, but even higher than the supporting vendors on this site. for anyone out there without any kits, i HIGHLY recommend buying off this man!






even thou i secretly despise him....

did you ever find a pic of the gauge cluster installed?
ASHRAFHouston, TX · Jun 8, 2007#13
In Australia we have both 3 and 5 door hatches

the side skirts are exacly the same (as the dealer said)

And the dimensions of the cars are the same

So it is supposed to fit
tca4Delta,BC · Jun 8, 2007#14
Damn i really want the Burntout body kit, too bad i have already pre-ordered a JDM RS bumper......i wish i can just ignore that and get this. But i wonder how much it would cost ...for the shipping

P.S = Does all those body kit includes the front grill and tow hook and every little things? Because our sponsor MC-BPT quoted me that they dont
SafariworldKL, Malaysia · Jun 8, 2007#15
I ordered my Ings+1 kit from Japan. It cost me a bomb. Ah well, back then there were no replica kits on the market. Just wanted to highlight that the original Ings rear bumper did not come with the rear reflectors/foglamps because they assume you will use the reflector from your original RS rear bumper. I had to buy them separately as an imported part from a parts vendor.

Etimago, are you getting the kits from Vitt Auto? Do they include the rear foglamp?
eTiMaGoThread starterBangkok, Thailand · Jun 8, 2007#16
Originally Posted by tca4 ↑
Damn i really want the Burntout body kit, too bad i have already pre-ordered a JDM RS bumper......i wish i can just ignore that and get this. But i wonder how much it would cost ...for the shipping

P.S = Does all those body kit includes the front grill and tow hook and every little things? Because our sponsor MC-BPT quoted me that they dont
Originally Posted by Safariworld ↑
I ordered my Ings+1 kit from Japan. It cost me a bomb. Ah well, back then there were no replica kits on the market. Just wanted to highlight that the original Ings rear bumper did not come with the rear reflectors/foglamps because they assume you will use the reflector from your original RS rear bumper. I had to buy them separately as an imported part from a parts vendor.

Etimago, are you getting the kits from Vitt Auto? Do they include the rear foglamp?
The required rear foglamps, licence plate lamps, badges, mesh grilles and so on are included in the price, so you will not need anything extra in that respect. Optional stuff like tow hooks and front fog lamp adapters are not included.
MeadLBC · Jun 8, 2007#17
RE: "Replica Modelista-style JDM LED lights"

Do they come all red like JDM tails? and the brake lights LEDs? and is there a DIY install link? I want to see the wiring install before I consider (btw I have a us spec 07 LB)
tacsnierCanada · Jun 9, 2007#18
does anyone have any pictures of the decorate skirt that they are selling here?
tk-421Dagobah · Jun 10, 2007#19
Thomas: Do you know what that slot on top of the C-ONE grille is for? It looks like it would be perfect for a short ram intake to suck air from...

Picture not included in this copy
Picture not included in this copy
eTiMaGoThread starterBangkok, Thailand · Jun 10, 2007#20
Originally Posted by Mead ↑
RE: "Replica Modelista-style JDM LED lights"

Do they come all red like JDM tails? and the brake lights LEDs? and is there a DIY install link? I want to see the wiring install before I consider (btw I have a us spec 07 LB)
The Modellista-style ones are the ones with the chrome sides, I can get the original all-red replicas too, though I have not seen them with my own eyes, they should still be of very good quality.

As for the wiring, you can dig through this original post about the first group buy for these lights, this looks like the best page to start:

GROUP BUY - JDM (RS) Vitz LED Tail Lamp ...

You basically have two options, try to recycle your original wiring and connectors, or just cut the wires and splice them up easy.

Originally Posted by tk-421 ↑
Thomas: Do you know what that slot on top of the C-ONE grille is for? It looks like it would be perfect for a short ram intake to suck air from...
It is actually a small air intake, if you look at the metal behind there, there is a small cutout in the same shape, though I doubt it is really big enough to make much of a contribution 😉

On another note, I am still trying to confirm compatibility of all side skirts with the 3-door model, it looks like at the minimum a bit of grinding will be needed. In that light, I will also soon be obtaining the prices for all separate pieces of each body kit for those of you who may only want the front or rear of a certain kit, or mix and match.
blacksanVirginia · Jun 10, 2007#21
Mr. T,

Do you have any update on those door sill scuff guards?
uncleyarisToronto · Jun 10, 2007#22
eTiMaGo, I'm on the fence about the LED side mirrors. From the original buy, how many people ordered? HAve the received them yet, and did anyone get the black for a non black car and how do they look. Any info appreciated.
eTiMaGoThread starterBangkok, Thailand · Jun 10, 2007#23
we had 6 sets ordered in the first GB, though they haven't yet been shipped. I myself got a black pair, just for the sake of trying to mix and match colors 😁

I don't know when I'll get to put them in, been pretty busy, and these days it's just so darn hot during the day 🙁
uncleyarisToronto · Jun 10, 2007#24
Originally Posted by eTiMaGo ↑
we had 6 sets ordered in the first GB, though they haven't yet been shipped. I myself got a black pair, just for the sake of trying to mix and match colors 😁

I don't know when I'll get to put them in, been pretty busy, and these days it's just so darn hot during the day 🙁
When you get the chance and they are done, post a pic, cause I've got a bayou and wanna see how they will look(i'd get black). Hopefully before the cut off for this round. If the pic is vague, I'll trust you on this one👍
glxBoSSHatfield · Jun 10, 2007#25
Originally Posted by blacksan ↑
Mr. T,

Do you have any update on those door sill scuff guards?
Also, will they fit sedans?
eTiMaGoThread starterBangkok, Thailand · Jun 11, 2007#26
I've updated the first post with individual pricing of bodykit parts. As you can see, there's quite a big difference between getting everything separately or in a full set...
ChinoCharlesOH · Jun 11, 2007#27
Thomas is my hero.
eijikikimaruSo. CaL · Jun 11, 2007#28
Thanks Thomas for the Update.

My wallet is crying 😢 because it lost a lot of weight from the last time... need more income.
ASHRAFHouston, TX · Jun 12, 2007#29
wow

it is cheaper to get the whole c-one kit + the burnout rear skirt than mixing and matching

Thomas, I've PM'd u my setup, could u please reply regarding the price?

Thank u
hasher22Australia Sydney · Jun 12, 2007#30
nevermind
brickhardmeatInner City, Dallas · Jun 19, 2007#31
Thomas,

Will there possibly be another group buy next month? I'm broke and I can't buy sh!t until mid month next month.😢
eTiMaGoThread starterBangkok, Thailand · Jun 20, 2007#32
Yup, the idea is to do this once a month 🙂
Black YarisToledo, OH · Jun 20, 2007#33
Dang Thomas you need to start a business
uncleyarisToronto · Jun 20, 2007#34
mirrors DIY part 2 Thomas?
eTiMaGoThread starterBangkok, Thailand · Jun 20, 2007#35
not for a lil' while... gotta go on a quick business trip first then we'll see 😛
Black YarisToledo, OH · Jun 20, 2007#36
Business trip..... you going to come see some of us here in the States? If so I would fly out to where ever to meet ya, I sure Chino would too
eTiMaGoThread starterBangkok, Thailand · Jun 20, 2007#37
er... not anytime soon 😁
ShroomsterOrlando · Jun 24, 2007#38
has anyone taken off the white connector for the reverse/turn signal yet? I can't figure the damn thing out, that or it's just that tight from teh factory...
yrsdrgnSF,CA · Jun 24, 2007#39
RAWR!!! Send me a Paypal "money request" before all my money goes into something else that I might find for my car!!!!!!!!! hurry!!!!! >< Yea. I just want to pay for it now through Paypal.
FoEKuZSan Clemente, CA · Jun 24, 2007#40
yeah, let me know when i can buy something!

something! anything! bodykit I want...
eTiMaGoThread starterBangkok, Thailand · Jun 24, 2007#41
you can buy something now 😁
This GB's deadline is the 30th of June, still plenty of time!
FoEKuZSan Clemente, CA · Jun 24, 2007#42
Originally Posted by eTiMaGo ↑
you can buy something now 😁
This GB's deadline is the 30th of June, still plenty of time!

well damn thomas, paypal me then on the c-one body kit... :)

or ill just mail my girl in pattaya some cash to deliver to you.. 26,000 baht? 😎
Kaotic LazagnaCentral Valley, CA · Jun 26, 2007#43
Originally Posted by brickhardmeat ↑
Thomas,

Will there possibly be another group buy next month? I'm broke and I can't buy sh!t until mid month next month.😢
X2...i can't even afford that nice exhaust tip for my sedan...😢
shoot, i still have to wait until i get some more money so i can paint my spoiler! 😢
eTiMaGoThread starterBangkok, Thailand · Jun 28, 2007#44
Guys, it's a bit last minute, I know, but there's a lot of people asking about the plain JDM RS front and back bumpers, I just got a confirmation of the accessory pieces (fog lights and so on), here's what we can offer, in grade A, unpainted:

Front RS Bumper (including OEM grille from Japan): $450
Picture not included in this copy
You can use the normal bumper's fog lights, there is no need for a special set. You should also get a front Netz badge to complete the look 👍
The USDM front rebar *may* actually fit with this bumper, we'd really need somebody to be a guinea pig and find out for sure 😉

Rear RS Bumper (including OEM fog lights from Japan): $600
Picture not included in this copy
You can use the license plate lights that you already have.
Rear rebar will have to be removed, there is no option for a smaller one.
If you have a stock exhaust, it may not line up with that notch! Japanese aftermarket ones like Tanabe, Blitz, will be fine.

It is pretty pricey, but those OEM pieces need to be used, and they account for about half the price!!!
tk-421Dagobah · Jun 28, 2007#45
Something I've been meaning to ask:
I've noticed that the OEM front bumper is made of something more flexible than the rest of the body. Are the aftermarket ones made like that as well?
eTiMaGoThread starterBangkok, Thailand · Jun 28, 2007#46
Well the main difference is that the OEM ones are made of ABS/polyurethane or similar plastic, which is quite flexible and hard to break.

These replica ones are made from FRP (Fiber Reinforced Plastic), which is stiffer, but also quite light. The problem is, in the event of a collision, it can break/snap more easily.

It's not such a huge deal, though, it's not very hard for a decent workshop to repair fiberglass, but you'll probably need to repaint the piece.
eTiMaGoThread starterBangkok, Thailand · Jul 2, 2007#47
All right guys, ordering for this group buy is now OVER.

Those who are still needing to pay, please do so in the next 12 hours, or I won't be able to order your stuff from the different suppliers.

Thanks 👍
JerkrattFair Lawn, NJ · Jul 10, 2007#48
order went thru yet?
eTiMaGoThread starterBangkok, Thailand · Jul 10, 2007#49
Oh yeah sorry for not updating this, all the stuff's on order already and I'll be getting it in the next couple of days 🙂
yrsdrgnSF,CA · Jul 10, 2007#50
do you know of anyone else that is willing to start a GB from thailand for body pieces?