Yarisworld Archive

FS: tooter I.V 2 inch thick intake manifold spacer

116 posts · 46,242 views · page 1 of 3

tooterOriginal postLos Angeles · Feb 5, 2014#1
This is a list where you can add your name if you're interested. It's not a commitment to buy, so you're free to change your mind. But you'll have a first chance at one in the order of the names. The spacer is $265 including shipping, and comes complete with mounting hardware and stock O ring gasket.


Production Estimation List

1. BEEF
2. Fredovvti





Picture not included in this copy

Replies 115

biffyBelfast, Northern Ireland · Feb 5, 2014#2
Whats it do??
tooterThread starterLos Angeles · Feb 5, 2014#3
Originally Posted by biffy ↑
Whats it do??
It lowers the torque peak by 450 rpm while fattening up the torque curve a little. The longer intake runners allow the engine to pull stronger at low rpms in normal driving.

Picture not included in this copy
KCALB SIRAYVirginia · Feb 5, 2014#4
Hi Tooter. My suggestion is that you explain in detail what this spacer does, but in layman's terms. I understand you have another thread on the production, but I'm pretty sure 85% of this community doesn't even understand why the torque and hp cross paths at 5252 on that chart let alone how this would or would not benefit them. There is a lot of information on that chart and to the person who doesn't get it just won't get it and pass it by without a second glance. Just a suggestion and good luck with the sales. 👍
Black_griffin6Atlanta Georgia · Feb 5, 2014#5
I have another question actually...do you think this will have any benefit with boosted projects?
I'm interested, but I might go boosted eventually.
BEEFnorth carolina · Feb 5, 2014#6
I thought boost likedshorter runners (less area to pressurize) there again, what do I know.
tooterThread starterLos Angeles · Feb 5, 2014#7
Originally Posted by KCALB SIRAY ↑
Hi Tooter. My suggestion is that you explain in detail what this spacer does, but in layman's terms. I understand you have another thread on the production, but I'm pretty sure 85% of this community doesn't even understand why the torque and hp cross paths at 5252 on that chart let alone how this would or would not benefit them. There is a lot of information on that chart and to the person who doesn't get it just won't get it and pass it by without a second glance. Just a suggestion and good luck with the sales. 👍
That's a good idea. I'll see if I can express the principle of horsepower and torque better as I recently heard some really good analogies.

Horsepower: How fast you hit a wall.

Torque: How far you push the wall after you hit it.

Horsepower is like a sprinter, while torque is like a cross country hiker.

The sprinter is faster, but when you put a 70 pound pack on his back, he slows down.

The cross country hiker is slower, but when you put a 70 pound pack on his back, he still moves at the same speed.

Then the intake valves on your engine open and close. They are abruptly starting and stopping the incoming air. Now the incoming air has inertia so starting and stopping creates pulses, or pressure waves that travel back and forth inside of the intake manifold runners. If the runners are made longer the pulses will resonate harmoniously at a lower frequency because they have a longer distance to travel to get to the other end. A lower harmonious frequency means reaching peak torque at a lower rpm. More torque at lower rpm means the engine pulls stronger without needing to rev higher.

Hope that helps...


Greg
tooterThread starterLos Angeles · Feb 6, 2014#8
Originally Posted by Black_griffin6 ↑
I have another question actually...do you think this will have any benefit with boosted projects?
I'm interested, but I might go boosted eventually.
I don't believe that it will make any difference. As pushing in the intake air with pressure negates all of the issues associated with normally aspirated air drawn in by the vacuum created by moving pistons.

The tooter intake manifold would work best for boosted applications...

Picture not included in this copy

Picture not included in this copy


...because the runners are larger in diameter, it will flow more air, it will accept a larger 55mm 1ZZ throttle body, and the strong aluminum can handle any boost pressure.

Greg
Black_griffin6Atlanta Georgia · Feb 6, 2014#9
Well my current mods are a Weapon R intake, 1zz TB, DC header, and a mandrel bent cat back exhaust.
I've been debating on weather to go boost or stay NA.
tooterThread starterLos Angeles · Feb 6, 2014#10
Originally Posted by Black_griffin6 ↑
Well my current mods are a Weapon R intake, 1zz TB, DC header, and a mandrel bent cat back exhaust.
I've been debating on weather to go boost or stay NA.
I generally like normally aspirated just for the simplicity of not needing to mess with all of the extra hardware and electronic tuning issues. Plus the strain on the engine is reduced. I believe that it will last longer and be more reliable just sucking in its own air. 😉

Greg
dragoonmcIllinois · Feb 6, 2014#11
Put me down for one
jjwitterUSA CT. · Feb 6, 2014#12
Put my name on the list
Klink10910 · Feb 7, 2014#13
I'd like one. I'm automatic and I think this coupled with my Blitz throttle controller would be a perfect match for that "get away quick at the stop light." Thank you.

PS: Will this come with all the hardware for installation? If not will instructions be provided that include the specific hardware nomenclature required along with gaskets etc. Thank you again.

PS2: Disregard previous, re-read thread. My dumb-a**.
tooterThread starterLos Angeles · Feb 7, 2014#14
Production Estimation List

1. BEEF
2. Fredovvti
3. dragoonmc
4. jjwitter
5. Klink10
1.5Tampa · Feb 7, 2014#15
How does this work with the MI manifold. Any dynos combined with one to see how that changes things?
tooterThread starterLos Angeles · Feb 7, 2014#16
Originally Posted by 1.5 ↑
How does this work with the MI manifold. Any dynos combined with one to see how that changes things?
I'm not certain that it will fit as it takes up the frontal clearance provided by the narrowness of the stock manifold. Note how the spacer puts it an inch away from the radiator reservoir.

Picture not included in this copy


I'd love to combine it with my tooter intake manifold, but there isn't enough space in front of the engine to do it.


Greg
1.5Tampa · Feb 7, 2014#17
Yea I was going to say, the MI manifold sits wayyyy close to the hood latch so idk if the spacer would push it too far, if anyone around you cares to test fit id be interested

are you planning on making any TB spacers?
HANZO_187Wintergarden, FL · Feb 8, 2014#18
I'll consider this, out my name in buddy!
tooterThread starterLos Angeles · Feb 8, 2014#19
Originally Posted by 1.5 ↑
Yea I was going to say, the MI manifold sits wayyyy close to the hood latch so idk if the spacer would push it too far, if anyone around you cares to test fit id be interested

are you planning on making any TB spacers?
No. Because they don't change the operating parameters of the intake manifold enough to matter. All a throttle body spacer does is to slightly enlarge the plenum volume. If the intake runners are already reading open air at the plenum, making it larger doesn't make any difference.

In contrast making the intake runners longer alters the frequency of the reflected intake pulses which makes them resonate at a lower frequency (lower rpm). That's what lowers the torque peak in the rpm range.

Greg
1.5Tampa · Feb 8, 2014#20
see ive heard adding space their does change the parameters of how air flows in through the mani and also they help with dissipating heat allowing the air coming in to stay slightly cooler.
tooterThread starterLos Angeles · Feb 8, 2014#21
Originally Posted by 1.5 ↑
see ive heard adding space their does change the parameters of how air flows in through the mani and also they help with dissipating heat allowing the air coming in to stay slightly cooler.
While that might be true... I don't believe that a spacer would make enough of a difference to matter. Intake air temp wouldn't be any cooler on a plastic manifold no matter what spacer was on it. Heck, the throttle body is even heated, so disconnecting the radiator fluid hoses would make more difference in cooling intake ait than a spacer.

Greg
tooterThread starterLos Angeles · Feb 8, 2014#22
Production Estimation List

1. BEEF
2. Fredovvti
3. dragoonmc
4. jjwitter
5. Klink10
6. HANZO_187
HANZO_187Wintergarden, FL · Feb 22, 2014#23
I just wanted to get an updated about these Mani-Spacers.

I'm very interested in how you even came to make all this stuff! I have to put mine on hold in the mean time till I find out what my class will be if I installed it for Auto Cross.

Please, keep us updated.

-HAN
BEEFnorth carolina · Feb 22, 2014#24
I actually need to put mine on hold too. i've been playing with numbers and am seriously looking into getting a BRZ.

I do still really like the concept and idea.
malibuguyWestminster, MD · Feb 22, 2014#25
Im definetly down for one. Just when exactly ill have the money is pending what i buy to replace my other car. I still need to finish the proper tooter.
tooterThread starterLos Angeles · Feb 23, 2014#26
Originally Posted by HANZO_187 ↑
I just wanted to get an updated about these Mani-Spacers.

I'm very interested in how you even came to make all this stuff!
It's just a hobby I enjoy doing in my spare time. 🙂

The whole process from idea to finished product is so much fun. It's like an adventure. First to come up with a concept, and then a design, and a prototype, and then dyno testing, and then production, and then sales.

I have to put mine on hold in the mean time till I find out what my class will be if I installed it for Auto Cross.

Please, keep us updated.

-HAN
Sure will, HAN. 👍

None of the names on the list mean a binding commitment. It's just to give me a rough idea of how many people might be interested so that I can estimate how many to have machined. Another production run of tooter II.VII Tacoma intake manifold spacers is still in the works right now awaiting for some new tool bits to arrive, so the Yaris spacers will also be coming soon. The method of machining the spacers is constantly being refined as we go.

Greg

Production Estimation List

1. Fredovvti
2. dragoonmc
3. jjwitter
4. Klink10
AstromanWenatchee, WA · Feb 23, 2014#27
Tooter I have a dc sports header, magnaflow exhaust, aem cai and a 1zz tb. Would this help me get back some of the low end torque I lost with the dc? I can't afford the TRD header thars for sale and wondering if this would help.
DJYojimboChicago · Feb 23, 2014#28
@astroman, you lost low end torque with the dc sports header?
tooterThread starterLos Angeles · Feb 24, 2014#29
Yeah, I also don't see how a DC header could hurt your low end performance, Astro. Did you also delete any cats or install a larger mid pipe?

I only know the difference logged between the before and after dyno runs with the spacer as the only change and nothing else.

This same equipment was used for both runs:

1. SRI with BLOX velocity stack air filter
2. Weapon R 4-2-1 header
3. MicroImage MagnaFlow axleback exhaust

Red: no spacer
Blue: tooter I.V spacer

Picture not included in this copy


Greg
1.5Tampa · Feb 24, 2014#30
Well that is still promissing. Big increase in torque for our little motors.
AstromanWenatchee, WA · Feb 24, 2014#31
I was getting my info from the TRD header sales thread which there was discussion that the TRD header wouldn't lose low end torque vs the DC Sports header.
tooterThread starterLos Angeles · Feb 25, 2014#32
Originally Posted by Astroman ↑
I was getting my info from the TRD header sales thread which there was discussion that the TRD header wouldn't lose low end torque vs the DC Sports header.
Yeah, the TRD is a very well thought out design, and was likely refined by dyno testing to get the very best configuration.

What works against all of the Yaris headers is that the available space to make it a bolt on part is so damned short. 😠

Man, I freaked out when I saw that someone actually folded the runners to make a long tube header fit into the SAME space as the stock short tube header on my Tacoma. It's by far the most clever bolt-on exhaust design I've ever seen! 🙂

Picture not included in this copy


The runners are 30% longer than the stock header, and are all equal length. 👍

Greg
BEEFnorth carolina · Feb 25, 2014#33
If i may be so bold, what did that header cost?
tooterThread starterLos Angeles · Feb 25, 2014#34
Originally Posted by BEEF ↑
If i may be so bold, what did that header cost?
It was $473 including shipping from LCEPerformance.com. I installed one within a week of buying the truck. The fit and finish are flawless. 🙂

Picture not included in this copy

Greg
BEEFnorth carolina · Feb 25, 2014#35
They made awesome use of space there. The price isn't ridiculous either.
tooterThread starterLos Angeles · Feb 26, 2014#36
As far as I'm concerned, I more than got my money's worth. 🙂
The stock downpipe didn't need to move one millimeter to accept the header.

Picture not included in this copy

On the dyno, the header lowered the torque peak by 650rpm from 3,800 rpm down to just 3,150 rpm.

Greg
longlivekelKC Missouri · Feb 28, 2014#37
Maybe in a year or so.. And if i have room after swap. I am definitely looking at buying one of these!!!
tooterThread starterLos Angeles · Mar 2, 2014#38
The tooters are done... 🙂

Picture not included in this copy

Picture not included in this copy



$265 including shipping

You guys on the list have first dibs.
There's still one extra for anyone else who might want one.

Production Estimation List

1. Fredovvti
2. dragoonmc
3. jjwitter
4. Klink10

The longer threaded studs have been ordered, paid for, in transit, and should be delivered any day now. So the tooters will be ready to ship this week.

My PayPal is: greggabi@verizon.net
A personal check or USPS Money Order is also fine.

Greg Mamishian
21444 Entrada Road
Topanga, CA 90290


Greg
HANZO_187Wintergarden, FL · Mar 2, 2014#39
OMG, they look so awesome...I wanna get one after a while. Not gonna find something like this any where else. They look great TooTer.
GolddeenohColumbia, SC · Mar 3, 2014#40
picture and list of everything needed to put this on the car please.

longer studs, ect...
WeeYariGeorgetown, Ontario, Canada · Mar 3, 2014#41
Originally Posted by Golddeenoh ↑
picture and list of everything needed to put this on the car please.

longer studs, ect...
It's all in the first post.
tk-421Dagobah · Mar 4, 2014#42
Looking great! 👍
tooterThread starterLos Angeles · Mar 4, 2014#43
Originally Posted by Golddeenoh ↑
picture and list of everything needed to put this on the car please.

longer studs, ect...
The threaded rods will be in any day now and I'll take a pic of the complete kit... but it's just basically the spacer, a stock intake manifold O ring gasket, 5 smooth flange nuts, and 5 long metric threaded studs.

The studs and nuts look like this...

Picture not included in this copy

...and the gasket looks like this.

Picture not included in this copy

The CNC designer perfectly replicated the same exact gasket groove profile as the stock intake manifold to insure a reliable leakproof seal.

Greg
Klink10910 · Mar 4, 2014#44
Hey Tooter.....Let me get the funds transfered over to checking and I'll get one to you ASAP. One more question....you had mentioned that one hose had to be lengthened to fit on the tooter. Can you point out which one in one of the pics showing the tooter installed? Got to figure out a clean way to do that. Thanks

Edit: Also are you using Loctite on those studs and without me having to look, what is the torque setting and tightening sequence?
tooterThread starterLos Angeles · Mar 4, 2014#45
Originally Posted by Klink10 ↑
Hey Tooter.....Let me get the funds transfered over to checking and I'll get one to you ASAP.
There's no rush, Klink. I'll likely be doing more small production runs if needed.

One more question....you had mentioned that one hose had to be lengthened to fit on the tooter. Can you point out which one in one of the pics showing the tooter installed? Got to figure out a clean way to do that. Thanks
Sure. I'll post some close up pics when I get some time off work. From running the aluminum tooter intake manifolds, my hoses were all switched around so what you'll see will have no relation to the stock setup! 😆

Edit: Also are you using Loctite on those studs and without me having to look, what is the torque setting and tightening sequence?
I've never torqued the intake bolts and didn't use any locktite on the longer spacer studs. I just go by feel and snug everything down evenly with a few sequential passes. With all of my intake experiments I've likely taken more manifolds off and on than anyone else here and have never had any issues. 🙂


Greg
rexseesyouRoseville, CA · Mar 4, 2014#46
Put me on the list for the 5th 1 but yes can you show a pic of the hose that needs to be modified. Thanks!
tooterThread starterLos Angeles · Mar 4, 2014#47
Someone just sent me money for one, but I have no idea what his screen name is, or whether or not he's on the list. 😕

So to avoid any more complications, right now there are four spacers still available, and from now on it's first come first served.

I'll just keep everyone posted on any changes in spacer availability in this thread.

Greg
tooterThread starterLos Angeles · Mar 4, 2014#48
Originally Posted by rexseesyou ↑
Put me on the list for the 5th 1 but yes can you show a pic of the hose that needs to be modified. Thanks!
Hey Rex, 🙂

I should have time to take some pics tomorrow. 👍

There's no longer a list and right now there are four spacers in stock.

Take Care,

Greg
3cyltrboOttawa · Mar 5, 2014#49
what affect will this spacer have in conjunction with your intake manifold/

will this spacer fit in the engine compartment for cars that already have your intake manifold?
tooterThread starterLos Angeles · Mar 5, 2014#50
Originally Posted by 3cyltrbo ↑
what affect will this spacer have in conjunction with your intake manifold/

will this spacer fit in the engine compartment for cars that already have your intake manifold?
Yeah, I was thinking of the same thing... but a spacer won't fit because the tooter intake manifold already occupies the free space between the engine and the radiator...

Picture not included in this copy


However, the tooter runners are already one inch longer than the stock runners, so it's like having a one inch spacer already built into it. 🙂

Greg