Replies continued
tooterThread starterLos Angeles · Mar 5, 2014#51Here's what I did with the coolant hoses...
Picture not included in this copy
simply disconnected them from the throttle body and connected them together with a coupling until I get some longer hose pieces to put them back on.
Then I just hung the loop over the fittings on the throttle body...
Picture not included in this copy
I don't live in a cold area so having a heated throttle body isn't much of an issue. That's why it doesn't matter if the car runs like this.
Greg
tooterThread starterLos Angeles · Mar 5, 2014#52Three spacers are still available,
and this is what kit looks like.
Picture not included in this copy
tooterThread starterLos Angeles · Mar 6, 2014#53Just to let the buyers know... I'm working downtown today, so all of your tooters will be sent out tomorrow, Friday the 7th. 🙂
Greg
tooterThread starterLos Angeles · Mar 7, 2014#54The spacers all shipped this morning at 9:00am by USPS Priority Mail.
The scheduled delivery date for all of them is this coming Monday, the 10th. 🙂
Greg
jjwitterUSA CT. · Mar 7, 2014#55I bought the first one, am looking forward to installing the spacer in the spring once it warms up
tooterThread starterLos Angeles · Mar 7, 2014#56It'll be there in just 3 days. 👍
Right now I'm the only person in the world running a intake spacer like that on my Yaris...
... but pretty soon, I won't be. 😉
Greg
rexseesyouRoseville, CA · Mar 8, 2014#57Can't wait to get mine on Monday! Thanks, Greg!
tooterThread starterLos Angeles · Mar 9, 2014#58Thanks dragoonmc. 🙂
We're down to two spacers now.
Greg
tooterThread starterLos Angeles · Mar 10, 2014#59Hey sorry guys... I totally neglected to file off the edge on the spacer like this...
Picture not included in this copy
It allows for clearance for the, I think it's the valve timing advance cylinder. Right here...
Picture not included in this copy
A rough hand file takes it right down. It doesn't take much to make it fit. I just totally forgot to do it. If you have any questions let me know here in this thread. First try to fit it unfiled so that it becomes crystal clear exactly where the little bit of filing is necessary. That cut isn't on the CNC machine program because it's an undercut, and the 90 degree tool doesn't do undercuts. So you simply file it by hand to fit. 🙂
Greg
longlivekelKC Missouri · Mar 11, 2014#60I'm very interested to see the mpg results from the community!
jjwitterUSA CT. · Mar 11, 2014#61My wife informed me my spacer arrived today, unfortunaly i"m in Washington State until the end of March, should be able to install in April
AstromanWenatchee, WA · Mar 11, 2014#62Ooooo what part of WA are you in? I'm smack dab in the middle.
I really really want one of these...... but can't free quite that much. Will you be doing another batch?
tooterThread starterLos Angeles · Mar 12, 2014#63 Originally Posted by
Astroman ↑ Ooooo what part of WA are you in? I'm smack dab in the middle.
I really really want one of these...... but can't free quite that much. Will you be doing another batch?
If the last two sell out, I'll have a few more machined. 🙂
What I do is totally determined by how many people buy them.
I'm already thinking about another product but I still don't know what it is yet.
Greg
tooterThread starterLos Angeles · Mar 12, 2014#64 Originally Posted by
longlivekel ↑ I'm very interested to see the mpg results from the community!
So am I. 🙂
My mileage results are inconclusive as my wife drives the car more than I do, and it basically never sees a freeway.
Greg
longlivekelKC Missouri · Mar 12, 2014#65I saw your mpg specs on your main thread and am impressed but lets get some hwy time on it and some romping included : )
Could you possibly provide 2 measurements? How much further does the stock intake stick out and how far out does the 1zz intake stick out.
My classic car swap is very limited in space and if I go down this route, I want to make sure it will clear the firewall (engine is in the back).
Thanks
ToyotaBuzzMasaryktown, FL · Mar 12, 2014#66 Originally Posted by
longlivekel ↑ My classic car swap is very limited in space and if I go down this route, I want to make sure it will clear the firewall (engine is in the back).
Thanks
I have to ask....what did you swap a 1NZ into? First gen MR2?
tooterThread starterLos Angeles · Mar 12, 2014#67 Originally Posted by
longlivekel ↑ I saw your mpg specs on your main thread and am impressed but lets get some hwy time on it and some romping included : )
Someone else will have to provide the mileage specs when they get their spacers installed, as we live in a rural area and very rarely use freeways, so there's basically no sustained high speed driving.
And as far as romping, it's not a high performance horsepower product. It just helps the engine to pull stronger at low rpms.
Could you possibly provide 2 measurements? How much further does the stock intake stick out and how far out does the 1zz intake stick out.
You can know exactly how much the stock intake sticks out with the spacer. Just measure yours and add 2 inches. 😉
My classic car swap is very limited in space and if I go down this route, I want to make sure it will clear the firewall (engine is in the back).
Thanks
No problem. 🙂 I should be able to measure the aluminum tooter and will post the results here today.
The Yaris happens to have plenty of empty space in front of the engine that allows the luxury of a thick spacer.
Greg
longlivekelKC Missouri · Mar 12, 2014#68If i start posting pix, i am afraid i will end up hi-jacking the thread : P
But i can at least say what type of car. 1968 mazda carol
tooterThread starterLos Angeles · Mar 12, 2014#69 Originally Posted by
longlivekel ↑ If i start posting pix, i am afraid i will end up hi-jacking the thread : P
But i can at least say what type of car. 1968 mazda carol
Hijack away kel... I'd like to see the pics too. 🙂
ToyotaBuzzMasaryktown, FL · Mar 12, 2014#70 Originally Posted by
longlivekel ↑ 1968 mazda carol
OMG! 358cc stock!?!
jjwitterUSA CT. · Mar 12, 2014#71 Originally Posted by
Astroman ↑ Ooooo what part of WA are you in? I'm smack dab in the middle.
I really really want one of these...... but can't free quite that much. Will you be doing another batch?
I'm in Bremerton, WA.
tooterThread starterLos Angeles · Mar 12, 2014#72 Originally Posted by
longlivekel ↑ I saw your mpg specs on your main thread and am impressed but lets get some hwy time on it and some romping included : )
Could you possibly provide 2 measurements? How much further does the stock intake stick out and how far out does the 1zz intake stick out.
My classic car swap is very limited in space and if I go down this route, I want to make sure it will clear the firewall (engine is in the back).
Thanks
The thickness of the tooter aluminum intake manifold is 8 1/8" from the surface of the gasketed flange to the runner's edge at the lowest point in the picture...
Picture not included in this copy Greg
longlivekelKC Missouri · Mar 13, 2014#73Thanks Greg
rexseesyouRoseville, CA · Mar 18, 2014#74Hey everyone! So, I've had the tooter spacer installed just over a week now. I just wanted to give credit to Greg where it's due and say that you definitely feel the torque difference at low rpms and you can get up to traffic speed from a red light a lot easier with the spacer on. Greg walked me through the install as this was my first time removing the intake manifold and was very patient with all my stupid noob questions. I just wanted to say that Greg is a great seller and he isn't shy to share his knowledge and help you out with any questions.
Thanks again, Greg!
dragoonmcIllinois · Mar 18, 2014#75Has any one put this on with the stock airbox yet?
tooterThread starterLos Angeles · Mar 18, 2014#76 Originally Posted by
rexseesyou ↑ Hey everyone! So, I've had the tooter spacer installed just over a week now. I just wanted to give credit to Greg where it's due and say that you definitely feel the torque difference at low rpms and you can get up to traffic speed from a red light a lot easier with the spacer on. Greg walked me through the install as this was my first time removing the intake manifold and was very patient with all my stupid noob questions. I just wanted to say that Greg is a great seller and he isn't shy to share his knowledge and help you out with any questions.
Thanks again, Greg!
You're welcome, Rex. 🙂
I don't mind helping because every new product is uncharted territory that no one has travelled before.
Greg
tooterThread starterLos Angeles · Mar 18, 2014#77 Originally Posted by
dragoonmc ↑ Has any one put this on with the stock airbox yet?
I don't think anyone has so far, but I'm pretty sure that it will work because the stock rubber intake hose is pretty flexible, and the spacer doesn't move the throttle body closer or farther away from the air box, but moves the throttle body
sideways in relation to the air box.
My tooter intake manifold also relocated the throttle body sideways in relation to the stock air box, except that it also moved it closer, so I trimmed a couple of inches off the hose and it was still flexible enough to easily make the sideways offset.
Picture not included in this copy If anyone does use their stock air box, please let everyone else here know how it goes, as that's useful information. 🙂
Greg
Kaotic LazagnaCentral Valley, CA · Mar 19, 2014#78It does make the heat shield on the K&N SRI (Typhoon) almost unusable. Fortunately for me, one of the brackets on the shield is no longer connected, so it allowed for some flex. I do, now, have a rattling sound because of this. haha.
Kaotic LazagnaCentral Valley, CA · Mar 19, 2014#79You can see that the intake pipe is no longer in the center of the heat shield passageway and is actually pushing the heat shield forward.
3 attachments not included in this copy
rexseesyouRoseville, CA · Mar 19, 2014#80 Originally Posted by
Kaotic Lazagna ↑ You can see that the intake pipe is no longer in the center of the heat shield passageway and is actually pushing the heat shield forward.
What is the wrap you have on the K&N intake and mesh around the filter? I have the same intake and am wondering if that helps.
Kaotic LazagnaCentral Valley, CA · Mar 19, 2014#81 Originally Posted by
rexseesyou ↑ What is the wrap you have on the K&N intake and mesh around the filter? I have the same intake and am wondering if that helps.
It's just heat reflective wrap (not a header wrap). The mesh around the filter is a K&N dry charger pre filter. Helps prevent water from getting sucked in.
Picture not included in this copy Kaotic LazagnaCentral Valley, CA · Mar 19, 2014#82As for the heat reflective wrap, it does help, but only noticeable, for the most part, under conditions that will allow heat soaking.
rexseesyouRoseville, CA · Mar 20, 2014#83 Originally Posted by
Kaotic Lazagna ↑ As for the heat reflective wrap, it does help, but only noticeable, for the most part, under conditions that will allow heat soaking.
Thanks for the info!
Kaotic LazagnaCentral Valley, CA · Mar 20, 2014#84 Originally Posted by
rexseesyou ↑ Thanks for the info!
No problem 👍
Kaotic LazagnaCentral Valley, CA · Mar 20, 2014#85One fill up since installing the Tooter spacer. After 340.9 miles of my car Tooting along (lol), it got 42.3 mpg. That's a slight improvement from my 40.3 mpg average.
http://www.fuelly.com/driver/07vios/yaris tooterThread starterLos Angeles · Mar 21, 2014#86 Originally Posted by
Kaotic Lazagna ↑ One fill up since installing the Tooter spacer. After 340.9 miles of my car Tooting along (lol), it got 42.3 mpg. That's a slight improvement from my 40.3 mpg average.
http://www.fuelly.com/driver/07vios/yaris
Heck, that's already really good even without the spacer. 🙂
We have only three fillups since the spacer and the overall average is 37.5 mpg, and that's with no freeway driving. Before the spacer, stock manifold and, stock throttle body, I was running the tooter et and the 1ZZ throttle body. The mileage average for 4 fillups was 39.9 mpg but that was with freeway driving.
Greg
Kaotic LazagnaCentral Valley, CA · Mar 21, 2014#87 Originally Posted by
tooter ↑ Heck, that's already really good even without the spacer. 🙂
We have only three fillups since the spacer and the overall average is 37.5 mpg, and that's with no freeway driving. Before the spacer, stock manifold and, stock throttle body, I was running the tooter et and the 1ZZ throttle body. The mileage average for 4 fillups was 39.9 mpg but that was with freeway driving.
Greg
Thanks 😁
As everyone can see in the log book portion, my mpg's are rather consistent from week to week, as I'm usually doing the same driving day in and day out. 😆
dragoonmcIllinois · Mar 21, 2014#88Hey got mine installed last night. With the stock air box this is kind of hard actually.
Things that are probably worth Mentioning are that the vacuum lines need extended, the sensor just off the throttle body cannot be mounted back into the boot due to the length of the wires. The coolant hose that comes up and over the manifold is actually long enough on its own, though the lower one does need extended or replaced if you can get it the other end off.
Without anything mounting the wiring harness that runs across the engine this might eventually lead to fatigued and broken wires, I will figure out something to attach that to and hopefully re attach the decorative cover
1 attachment not included in this copy
Kaotic LazagnaCentral Valley, CA · Mar 22, 2014#89I had to extend/swap out the hose that red on yours, and the PCV hose. I was, oddly enough, able to reuse the coolant hose that goes to the TB.
tooterThread starterLos Angeles · Mar 26, 2014#90 Originally Posted by
dragoonmc ↑ Hey got mine installed last night. With the stock air box this is kind of hard actually.
Things that are probably worth Mentioning are that the vacuum lines need extended, the sensor just off the throttle body cannot be mounted back into the boot due to the length of the wires. The coolant hose that comes up and over the manifold is actually long enough on its own, though the lower one does need extended or replaced if you can get it the other end off.
Without anything mounting the wiring harness that runs across the engine this might eventually lead to fatigued and broken wires, I will figure out something to attach that to and hopefully re attach the decorative cover
I also had similar hose situations when I installed the spacer on my Tacoma. And got around the intake issue with an aftermarket intake, where the whole thing simply moved right along with the new throttle body position.
Picture not included in this copy Greg
tooterThread starterLos Angeles · Apr 3, 2014#91Four tooter I.V spacer kits have been sold... and two are still available. 🙂
Picture not included in this copy Picture not included in this copy Picture not included in this copy Picture not included in this copy $265 includes shipping.
PayPal:
greggabi@verizon.net Or personal check or USPS Money Order to.
Greg Mamishian
21444 Entrada Road
Topanga, CA 90290
Greg
tooterThread starterLos Angeles · Apr 28, 2014#92bump
tooterThread starterLos Angeles · May 14, 2014#93bump
GolddeenohColumbia, SC · May 14, 2014#94do the bumpidy bump!!
tooterThread starterLos Angeles · May 14, 2014#95It only took 4 units to saturate the market! 😆
Breaking ground with a new product is always an assumed risk, and a minimal one I was more than willing to take. The whole creative process is an exciting adventure. 🙂
Greg
tooterThread starterLos Angeles · May 23, 2014#96bump
malibuguyWestminster, MD · May 24, 2014#97Ill buy one after my annerversery for sure. If I bought it now wifey will kill me...
tooterThread starterLos Angeles · May 24, 2014#98 Originally Posted by
malibuguy ↑ Ill buy one after my annerversery for sure. If I bought it now wifey will kill me...
If you did, she'd use it like brass knuckles! 😆
Greg
CrankyOldManWest Michigan · May 24, 2014#99 Originally Posted by
tooter ↑ It only took 4 units to saturate the market! 😆
Breaking ground with a new product is always an assumed risk, and a minimal one I was more than willing to take. The whole creative process is an exciting adventure. 🙂
Greg
Yeah, I pretty much did that with the Blitz gaskets. I'm sure the glovebox gauge panel will fare about the same.
That said, would there be any point to trying to combine this with a supercharger?
tooterThread starterLos Angeles · May 25, 2014#100 Originally Posted by
CrankyOldMan ↑ Yeah, I pretty much did that with the Blitz gaskets. I'm sure the glovebox gauge panel will fare about the same.
That said, would there be any point to trying to combine this with a supercharger?
I don't believe it would be of any benefit, Cranky...
Longer intake runners increasing low end torque relates to normally aspirated induction where the action of the intake valves abruptly closing creates pressure waves that travel back and forth in the intake runners. When the timing of those pulses is altered because they have farther to travel the torque peak becomes shifted down lower in the rpm range.
Picture not included in this copy As you can see, the effect on horsepower is essentially zero, and the torque increase is only +3. Almost
all of the benefit is from the torque peak being reached 400 rpm
sooner, at 3,650 instead of 4,050.
Putting an active pump between the throttle body and the head not only interrupts those pulses, but the fact that it is
already pressuring the incoming air renders the value of timing of those pulses irrelevant.
Bottom line: What you already have is lightyears better than any spacer, so it is impossible for the spacer to make it any better. 👍
Greg