No. Intake is gone.Originally Posted by Christian_Yaris ↑Still have Intake?
For Sale: Every single part off an 07 MT Liftback
356 posts · 132,870 views · page 6 of 8
Replies continued
Do you have the cowl (facia?) for the passenger side?
It's the black trim piece that is between the hood/fender/glass.
Steve
It's the black trim piece that is between the hood/fender/glass.
Steve
I do have it, but it has some damage where the corner of the hood got pushed back into it.Originally Posted by nortonfb ↑Do you have the cowl (facia?) for the passenger side?
It's the black trim piece that is between the hood/fender/glass.
Steve
Mine is the same as yours.
Thanks anyway.
Steve
Thanks anyway.
Steve
Received. Super fast. Thanks!Originally Posted by CTScott ↑I think I have some of those on hand. Let me check and I will PM you.
shocks and struts still available?
Sorry. Long gone.Originally Posted by sort_o_sane ↑shocks and struts still available?
Nevermind you already sold it :(
Is the Fan Speed/Recirculation switch still available?
Mine has a blown lamp only, I wont need the part that opens/close the recirculation.
Bolts for rear seats?
Price shipped to 29730?
Thank you.
Mine has a blown lamp only, I wont need the part that opens/close the recirculation.
Bolts for rear seats?
Price shipped to 29730?
Thank you.
I do have the fan switch, but you actually just have to replace the bulb, which is actually easy to do. There is a round plastic cap on the back side, with a slot for a screwdriver, just turn it a 1/4 turn and the bulb assembly comes out.Originally Posted by hw6515 ↑Is the Fan Speed/Recirculation switch still available?
Mine has a blown lamp only, I wont need the part that opens/close the recirculation.
Bolts for rear seats?
Price shipped to 29730?
Thank you.
I do have some of the seat bolts, but I don't believe I have a full set. Do you need them all, or just a few?
Do you happen to know the part number for the bulb and where can I get it?Originally Posted by CTScott ↑I do have the fan switch, but you actually just have to replace the bulb, which is actually easy to do. There is a round plastic cap on the back side, with a slot for a screwdriver, just turn it a 1/4 turn and the bulb assembly comes out.
I do have some of the seat bolts, but I don't believe I have a full set. Do you need them all, or just a few?
I will have to check tomorrow to see how many bolts I need and which ones. (not sure they are all the same)
90010-01113Originally Posted by hw6515 ↑Do you happen to know the part number for the bulb and where can I get it?
I will have to check tomorrow to see how many bolts I need and which ones. (not sure they are all the same)
is the AFE cold air intake and the rear sway bar still available? i want to purchase them asap if so .
Those are gone. The thread below is primarily the parts that I currently have on hand:Originally Posted by Deadliestflea ↑is the AFE cold air intake and the rear sway bar still available? i want to purchase them asap if so .
Misc parts clearance sale - Making garage space for pellets
Hi Scott, I need stereo fascia and vent assembly pictured below. Do you still have and how much shipped? Thanks
Picture not included in this copy
Picture not included in this copy
I have one, but it has been painted and has a matching AC control panel. I could do $65 shipped for the two (and would include the vent louver assembly):Originally Posted by Shinare ↑Hi Scott, I need stereo fascia and vent assembly pictured below. Do you still have and how much shipped? Thanks
Picture not included in this copy
Picture not included in this copy
Do u have the antenna still available? The part I need is 86300B in the pic. Thank you.
Picture not included in this copy
Picture not included in this copy
How much should a replacement frame for the rear left door cost? Mine is dented real bad and I'm starting to consider more getting a replacement
By frame, do you mean the what the door mates to on the body? If so, the cost of the sheetmetal would be the least of your worries.Originally Posted by Ben_ ↑How much should a replacement frame for the rear left door cost? Mine is dented real bad and I'm starting to consider more getting a replacement
I mean the actual door with no accessories. I can swap glass regulator locks and such
An OEM empty door is over $300.Originally Posted by Ben_ ↑I mean the actual door with no accessories. I can swap glass regulator locks and such
Yikes.... I'm guessing there is no aftermarket? Based on a quick search I could only find bumpers and similar parts nothing for doors
Do you have the plastic dish type thing that goes in front of the cluster?
I do have one of those. I could do $25 + shipping for it.Originally Posted by axiom ↑Do you have the plastic dish type thing that goes in front of the cluster?
Do you have any of the HVAC controls for either the temp selector or the airflow selector? I need the smaller gear from inside, willing to buy the entire knob assy if needed.
I do have either of those two controls on hand.Originally Posted by willisjm193 ↑Do you have any of the HVAC controls for either the temp selector or the airflow selector? I need the smaller gear from inside, willing to buy the entire knob assy if needed.
PM SentOriginally Posted by CTScott ↑I do have either of those two controls on hand.
48069-59135
48068-59145
Turns out I need to swap these two parts again... 🙄
@CTScott: You wouldn't happen to have another set lying around, right? LMK
48068-59145
Turns out I need to swap these two parts again... 🙄
@CTScott: You wouldn't happen to have another set lying around, right? LMK
Wow! Are the roads down there that bad that you are chewing through ball joints?Originally Posted by tk-421 ↑48069-59135
48068-59145
Turns out I need to swap these two parts again... 🙄
@CTScott: You wouldn't happen to have another set lying around, right? LMK
I don't have any on hand, but if it would be less expensive for you I can track down a set.
I know, right? I have no idea as to what's going on, since the roads aren't that bad... I haven't even used the car that much.
They're asking ~$1300 for new parts & labor, which is nuts. Maybe I could just swap the ball joints with a local mechanic and save some money that way?
They're asking ~$1300 for new parts & labor, which is nuts. Maybe I could just swap the ball joints with a local mechanic and save some money that way?
That would definitely be cheaper. I would also double check that there is really something wrong with them.Originally Posted by tk-421 ↑I know, right? I have no idea as to what's going on, since the roads aren't that bad... I haven't even used the car that much.
They're asking ~$1300 for new parts & labor, which is nuts. Maybe I could just swap the ball joints with a local mechanic and save some money that way?
Still have the rear bumper and does anyone know if an 07 will fit an 08 liftback? What kind of white is it?
No - that sold to someone in Canada. 07 and 08 are identical and there was only one white for those years.Originally Posted by scoobopdan ↑Still have the rear bumper and does anyone know if an 07 will fit an 08 liftback? What kind of white is it?
Your list still has rear bumper fyi thanks for the info
Hello CTScott,
Just curious if the front knuckles are still available and if the wheel bearings are in good shape? Mine recently started squealing/grinding and seems it would be easier to just swap the whole assembly than just the bearing. Also, how much is shipping to Calgary, AB Canada T2A6J4?
Just curious if the front knuckles are still available and if the wheel bearings are in good shape? Mine recently started squealing/grinding and seems it would be easier to just swap the whole assembly than just the bearing. Also, how much is shipping to Calgary, AB Canada T2A6J4?
The front knuckles are still available. They are non-ABS though. Does your car have ABS?Originally Posted by TJR ↑Hello CTScott,
Just curious if the front knuckles are still available and if the wheel bearings are in good shape? Mine recently started squealing/grinding and seems it would be easier to just swap the whole assembly than just the bearing. Also, how much is shipping to Calgary, AB Canada T2A6J4?
Hey would you happen to have a spare alternator left over for sale?
YesOriginally Posted by Peloton ↑Hey would you happen to have a spare alternator left over for sale?
Excuse me if this was answered, do you have the front map lights?
how much for the headlights?
The map lights are gone, but I still have the center dome light.Originally Posted by Kaeon ↑Excuse me if this was answered, do you have the front map lights?
Headlights are gone.Originally Posted by chancellor6869 ↑how much for the headlights?
What is still available?
This thread shows what I currently still have on hand:Originally Posted by vivalaflam ↑What is still available?
Misc parts clearance sale - Making garage space for pellets
Headlights?
I have a set of 09-11 headlights, but with the little notch in them, they don't fit the 06-08.Originally Posted by Thebigwicks ↑Headlights?
ctscott
you happen to have a rear view mirror? that will work with my 07 base??
you happen to have a rear view mirror? that will work with my 07 base??
Originally Posted by evil03 ↑ctscott
you happen to have a rear view mirror? that will work with my 07 base??
I don't have the windshield mounted one.
ctscott
thanks yea my stock one mirror ball socket split so its loose if you even have one let me know lol
thanks yea my stock one mirror ball socket split so its loose if you even have one let me know lol
CTScott,
Do you have a left front headlight that fits an 09' hatchback, or a left fender liner for same vehicle?
Do you have a left front headlight that fits an 09' hatchback, or a left fender liner for same vehicle?