Yarisworld Archive

For Sale: Every single part off an 07 MT Liftback

356 posts · 132,870 views · page 1 of 8

CTScottOriginal postUSA, CT · Aug 6, 2013#1
Note - Almost everything in this thread was sold. The only parts I have left are in this thread: Misc parts clearance sale - Making garage space for pellets



I recently purchased another Crashy with the hopes of repairing it and putting it back on the road for a buddy of mine. My frame guy squashed that hope yesterday, so I will be completely parting her out.

It is probably easier for me to list what is not usable or available, rather than listing everything that is. I am willing to ship just about anything just about anywhere.

When I mentioned acquiring her on Facebook, 2007tRD mentioned an interest in doing a MT conversion on his AT Yaris, but his wife doesn't drive stick, so he decided not to. This would be a great opportunity though if someone would like to do that, as I could package (and document) everything associated with doing the conversion.


Here's a video of her running up on my lift: http://www.youtube.com/watch?v=l-fQKSIJayk

Here are a couple of pics (let me know if you would like to see pics of specific parts):
Picture not included in this copy

Picture not included in this copy

Details:

2007 Yaris Liftback - White

Engine: A little over 100K miles on the Engine, which runs great and seems to have been well maintained.

Transmission: 5 Speed Manual. Shift smoothly and seems well maintained as well.

Body - This car is pristine (other than what go smashed). From the doors back she looks like new. The hatch is perfect, with not a singe scratch, and the rear bumper is in very good condition as well. The front bumper is damaged, but the grills and Toyota emblem are good.

AC System - System was still fully pressurized and working. Condenser and all piping are fine. Compressor works fine, but has some chips out of the edges of the plastic pulley. I ran it for about an hour and they did not seem to cause any issues.

Brakes - (Non-ABS) All brake parts are good. The rotors, calipers and pads have no wear and appear to have been very recently replaced.

Wheels - 3 of the four stock steelies are in good condition. 3 of the four hubcaps are decent.

Interior - The door panels, side panels, and headliner are all excellent. The carpet looks very good, except for a wear through point by the clutch pedal. The Radio and AC control panels were covered in neffy wrap. The dash is in very good shape and the passenger airbag is not popped. Driver's airbag popped.

Seats - The front and rear (bench) seats are perfect, with no fading.

Features - Base model (no power windows), but door locks have been upgraded with aftermarket actuators. Manual mirrors are in very good condition.

Still For Sale (at least the things that I can specifically think of) Prices do not include shipping:

1. Front brakes (calipers only left, like new): $50
2. Rear brakes: $50
3. Gas tank: $50
4a. Fuel Pump: $60
4b. Fuel level float with sensor: $25
5. Dash top with passenger airbag: $150
6. Steel Wheel (1 available): $25 each

8. Rear Seat (bench): $100
9. Front Seats: $75 each
10. Brake booster (non-abs): $25

14. White Hatch assembly with rear wiper: $225
18. AC Compressor (without pulley): $125
19. Alternator: $60
20. Rear Bumper: $150
21. Whiteline Adjustable Rear Sway Bar (in like-new condition): $175
22. AFE Cold Air Intake: $140
24. OEM muffler: $25
25. OEM Mid Pipe: $100
26. Left rear fender liner: $15
27. Right rear fender liner: $15
28. Left front drive axle: $40
29. OEM Springs (x4): $40
30. Headliner: $200
31. AT to MT conversion kit (includes documentation and everything needed except the gearbox): $1000
32. Non-ABS power steering ECU: $65
33. Steering column w/PS Motor: $100




OEM Hatch Struts: $40 for both:
Picture not included in this copy

Firewall blanket - Inside: $25
Picture not included in this copy

Firewall blanket - Under hood: $25
Picture not included in this copy

Front knuckles - Non ABS: $40 each
Picture not included in this copy

Picture not included in this copy

Alternator: $60
Picture not included in this copy

AC Blower assembly: $40
Picture not included in this copy

Dome light: $10
Picture not included in this copy

Rear bumper impact foam: $30
Picture not included in this copy

Center vent assembly: $10
Picture not included in this copy

Rear speakers with mounting rings: $20
Picture not included in this copy

Center Console: $25
Picture not included in this copy

Roof gutter trim strips: $15 set
Picture not included in this copy

Kick panels: $15 set
Picture not included in this copy

Manifold Heath Shield: $20
Picture not included in this copy

OEM Springs: $40 all
Picture not included in this copy

OEM rear shocks: $25 set
Picture not included in this copy



-

Replies 355

enviriCT · Aug 6, 2013#2
i need the entire center console area! lol i also have other people that needs stuff..like a door..i'll give em a call
tk-421Dagobah · Aug 6, 2013#3
Picture not included in this copy
mazillaSan Jacinto California · Aug 6, 2013#4
I know this is random, and the engine cover is not avail., but what about the engine cover nuts? The little acorn-style nuts that hold the engine cover down...I lost mine a while back and could use another set.


Yes yes...I lost my nuts. ;)
racerbLeland, NC · Aug 6, 2013#5
I know your guy said it is beyond repair, but would it not be suitable for a racecar chassis? If so, how much for the whole car??

racerb 😕
Ryze268Antigua & Barbuda · Aug 6, 2013#6
I would like all the bits for a manual conversion except the gearbox, you know.. clutch pedal, shift assembly, etc.

i am very serious about making a purchase
CTScottThread starterUSA, CT · Aug 6, 2013#7
Originally Posted by racerb ↑
I know your guy said it is beyond repair, but would it not be suitable for a racecar chassis? If so, how much for the whole car??

racerb 😕
It would definitely be. It actually would have been a reasonable (~$2000) frame fix for a streetable car, except adding that to what I paid for the car, plus the crazy cost shipping for a non-running (before it got to me) car, I just couldn't justify spending that much, as my buddy had a very limited budget.

At this point it is looking like I have enough interest in pieces and parts that it just wouldn't make sense for me to sell the whole car.

The car actually has a clear title and a squeaky clean carfax, so the carcass with the VIN tags still attached probably has some value.
tk-421Dagobah · Aug 6, 2013#8
Originally Posted by Ryze268 ↑
I would like all the bits for a manual conversion except the gearbox, you know.. clutch pedal, shift assembly, etc.
That's funny because I actually want the gearbox since apparently one of my synchros is dying... I'm also interested in part 84306-22010, which is the spiral cable for the airbag, but I'm not sure if that's part of the airbag assy that's either pending sale or unusable... Finally, I'll take the neffy panels and ac controls unless somebody already asked for them. LMK! 👍
CTScottThread starterUSA, CT · Aug 6, 2013#9
Originally Posted by Ryze268 ↑
I would like all the bits for a manual conversion except the gearbox, you know.. clutch pedal, shift assembly, etc.

i am very serious about making a purchase
PM me and we'll figure it out. I would love to see someone do this, just because it has been talked about a million times and no one has even done it.
CTScottThread starterUSA, CT · Aug 6, 2013#10
Originally Posted by mazilla ↑
I know this is random, and the engine cover is not avail., but what about the engine cover nuts? The little acorn-style nuts that hold the engine cover down...I lost mine a while back and could use another set.


Yes yes...I lost my nuts. ;)
Check you wife's pocketbook. I know that where mine keeps mine...

If the gentleman taking the cover doesn't need them they are yours. By the way, I finally tracked down a Canadian tach cluster to do a conversion and color change for you...
CTScottThread starterUSA, CT · Aug 6, 2013#11
Originally Posted by tk-421 ↑
That's funny because I actually want the gearbox since apparently one of my synchros is dying... I'm also interested in part 84306-22010, which is the spiral cable for the airbag, but I'm not sure if that's part of the airbag assy that's either pending sale or unusable... Finally, I'll take the neffy panels and ac controls unless somebody already asked for them. LMK! 👍
Hmm, wondering about the value in shipping a tranny from CT to Mexico, but we can definitely scope it out. The spiral cable is actually there and OK. I peeled the neffy off the radio surround, to see how it was modified (the original owner trimmed the plastic a bit at the top and bottom of the surround, probably to allow his radio to still fit with the thickness of the neffy. The AC controls are still intact with the neffy.
tk-421Dagobah · Aug 6, 2013#12
BTW, is the black plastic part between the windshield and the hood salvageable? If so, I'm interested in that as well. Thanks!

Originally Posted by CTScott ↑
Check you wife's pocketbook. I know that where mine keeps mine...
😆
CTScottThread starterUSA, CT · Aug 6, 2013#13
Originally Posted by tk-421 ↑
BTW, is the black plastic part between the windshield and the hood salvageable? If so, I'm interested in that as well. Thanks!


😆
The wiper cowling - The right side piece is pretty crunched, but the right side piece (with the pop-out for the battery) is fine.
tk-421Dagobah · Aug 6, 2013#14
Originally Posted by CTScott ↑
Hmm, wondering about the value in shipping a tranny from CT to Mexico, but we can definitely scope it out. The spiral cable is actually there and OK. I peeled the neffy off the radio surround, to see how it was modified (the original owner trimmed the plastic a bit at the top and bottom of the surround, probably to allow his radio to still fit with the thickness of the neffy. The AC controls are still intact with the neffy.
You'd be surprised regarding the tranny... It's really difficult to get used parts around here. I have no idea where they take the parts since I've been asking around, but no one is talking at the dealer. I wonder why... 🙄

As for the AC panels, I'm considering modifying it a bit to fit a 7" tablet that I can add/remove, so it would be better to do it on a spare kit. I don't really mind the neffy being peeled off too much since I have some spare fabric in my garage. Also one of my AC controls sunk to the inside of the AC panel and I'm not sure if it's usable anymore, so... I might go for them just in case.

I'll get back to you about the cowling, since I need to make sure about exactly which part I need. 😁
CTScottThread starterUSA, CT · Aug 6, 2013#15
Originally Posted by tk-421 ↑
You'd be surprised regarding the tranny... It's really difficult to get used parts around here. I have no idea where they take the parts since I've been asking around, but no one is talking at the dealer. I wonder why... 🙄

As for the AC panels, I'm considering modifying it a bit to fit a 7" tablet that I can add/remove, so it would be better to do it on a spare kit. I don't really mind the neffy being peeled off too much since I have some spare fabric in my garage. Also one of my AC controls sunk to the inside of the AC panel and I'm not sure if it's usable anymore, so... I might go for them just in case.

I'll get back to you about the cowling, since I need to make sure about exactly which part I need. 😁
I think they melted all the used Yaris parts down there to make my Tacoma.
fnkngrvIn The Hotbox · Aug 6, 2013#16
I might be interested in resurrecting my A/C. Let me know what you would run me to "buy back" the parts that I sold you...lol.
CTScottThread starterUSA, CT · Aug 6, 2013#17
Originally Posted by fnkngrv ↑
I might be interested in resurrecting my A/C. Let me know what you would run me to "buy back" the parts that I sold you...lol.
You still have your compressor right? If so, you just need the lines and the condenser, if I remember correctly.
dumbo0San Francisco, CA · Aug 7, 2013#18
I want the white panels on the inside.. Like the pillars, and the one by the door.. Hehe
fnkngrvIn The Hotbox · Aug 7, 2013#19
Originally Posted by CTScott ↑
You still have your compressor right? If so, you just need the lines and the condenser, if I remember correctly.
yup.
CTScottThread starterUSA, CT · Aug 7, 2013#20
Originally Posted by fnkngrv ↑
yup.
Sounds like a plan. I will shoot you an email.
3cyltrboOttawa · Aug 7, 2013#21
AC Stuff if not already spoken for (please)
(lines / condenser etc...) (I already have an interior switch but I could take that also if you wanted to clear out all AC stuff at once)



Also the left and right Kickpanels (plastic panels down by your feet)
And the left and right sill panels (plastic panels that join the kickpanels)
????$$$$$$?????????


maybe the back seat (pending some pictures of fabric style and condition)
(assuming the seat, I would just drive from Ottawa to your place to pick it up if that was alright)
???????$$$$$??????????

A-Pillar trim panels (the interior plastic pieces) IF this car has side airbags (if NOT side airbags equipped = can't use the trim pieces)

Cheers

Will
ilikericesavannah, ga · Aug 7, 2013#22
Hey scott, I need the this part in front of the PASSENGER side mirror. My clips are broken so it kinda rattles in the wind sometimes. How much to Savannah, GA 31419?

1 attachment not included in this copy

AstromanWenatchee, WA · Aug 7, 2013#23
Scott, I'm in need of the fresh air/recirculating air assembly. A shop put some stuff in backwards years ago and it broke the cover on the bottom left (the c or half clam shell part) that actually diverts the fresh and recirculating air. Also when it did this it messed the cable up. Switch is fine. I really need it.

I'm also curious if I could get a price on the manual trans conversion parts (been wanting to do that since I bought the auto), and the right interior door panel (I broke my speaker cover on the door), zip 98802.
contraband831CEN*CAL · Aug 7, 2013#24
Do you happen to have the complete strut mounts (bearings, rubber etc..), if so how much shipped to 93635?

also side marker lights?
mazillaSan Jacinto California · Aug 7, 2013#25
Originally Posted by CTScott ↑
Check you wife's pocketbook. I know that where mine keeps mine...

If the gentleman taking the cover doesn't need them they are yours. By the way, I finally tracked down a Canadian tach cluster to do a conversion and color change for you...

Hahaha!


Thank you on both counts! At your leisure on the tach, I know you have your hands full with this part out at the moment. I'll figure out what color I want and I'll get into my records for my exact mileage so we can adjust my ODO to the proper reading too. I have a paper file that logs every mile I've ever driven(and been reimbursed on) for work...the downside is my son spread the entire thing(about 7 years worth) around the kitchen a while back when I left the folder out. It's a cluster F at the moment. 😆
CTScottThread starterUSA, CT · Aug 7, 2013#26
Originally Posted by 3cyltrbo ↑
AC Stuff if not already spoken for (please)
(lines / condenser etc...) (I already have an interior switch but I could take that also if you wanted to clear out all AC stuff at once)



Also the left and right Kickpanels (plastic panels down by your feet)
And the left and right sill panels (plastic panels that join the kickpanels)
????$$$$$$?????????


maybe the back seat (pending some pictures of fabric style and condition)
(assuming the seat, I would just drive from Ottawa to your place to pick it up if that was alright)
???????$$$$$??????????

A-Pillar trim panels (the interior plastic pieces) IF this car has side airbags (if NOT side airbags equipped = can't use the trim pieces)

Cheers

Will
AC stuff is spoken for.

The rear seat is the blue dot fabric type and is in excellent condition (no stains or holes).

Picture not included in this copy

The kick panels and sills are still available.

I would do $100 for the rear seat and $40 for the sills and kicks.

A pillars are spoken for, but they are non-airbag anyhow.

1 attachment not included in this copy

CTScottThread starterUSA, CT · Aug 7, 2013#27
Originally Posted by ilikerice ↑
Hey scott, I need the this part in front of the PASSENGER side mirror. My clips are broken so it kinda rattles in the wind sometimes. How much to Savannah, GA 31419?
The passenger side one was gone. The driver side one is there, but two of the clips snapped when I was removing it. For yours, either use some 3M double sided tape or 3M emblem and molding adhesive (comes in a tube). My red one (Crashy #2) had broken clips and I used the 3M adhesive.
D&DAustin, TX · Aug 7, 2013#28
Hey Scott,

I realize this is a tiny request, but I need one of the bolt covers that cover the front wiper bolt. See here for exact piece and part #: http://www.midatlantictoyotaparts.co...ft/85292-13010

Just let me know what you think is a fair price and I can PayPal you immediately.

Thanks! :)
CTScottThread starterUSA, CT · Aug 7, 2013#29
Originally Posted by Astroman ↑
Scott, I'm in need of the fresh air/recirculating air assembly. A shop put some stuff in backwards years ago and it broke the cover on the bottom left (the c or half clam shell part) that actually diverts the fresh and recirculating air. Also when it did this it messed the cable up. Switch is fine. I really need it.

I'm also curious if I could get a price on the manual trans conversion parts (been wanting to do that since I bought the auto), and the right interior door panel (I broke my speaker cover on the door), zip 98802.
So, you need the whole "bread box" assembly - That is definitely doable. Let me pull it and get a weight and I'll shoot you a quote.

Ryze268 beat you to asking about the MT conversion kit. If he doesn't bite, you are next in line.

The interior door panels (and possibly entire doors) are sale pending.
CTScottThread starterUSA, CT · Aug 7, 2013#30
Originally Posted by contraband831 ↑
Do you happen to have the complete strut mounts (bearings, rubber etc..), if so how much shipped to 93635?

also side marker lights?
Yes on the strut mounts. Let me pull them and get a weight. The left side marker light is good. the right side lost the clear cover.
CTScottThread starterUSA, CT · Aug 7, 2013#31
Originally Posted by D&D ↑
Hey Scott,

I realize this is a tiny request, but I need one of the bolt covers that cover the front wiper bolt. See here for exact piece and part #: http://www.midatlantictoyotaparts.co...ft/85292-13010

Just let me know what you think is a fair price and I can PayPal you immediately.

Thanks! :)
I'd prefer to sell those covers along with the wiper arm.
D&DAustin, TX · Aug 7, 2013#32
Originally Posted by CTScott ↑
I'd prefer to sell those covers along with the wiper arm.
Ahh, OK.
Ryze268Antigua & Barbuda · Aug 7, 2013#33
PM sent =]
ilikericesavannah, ga · Aug 7, 2013#34
Originally Posted by CTScott ↑
The passenger side one was gone. The driver side one is there, but two of the clips snapped when I was removing it. For yours, either use some 3M double sided tape or 3M emblem and molding adhesive (comes in a tube). My red one (Crashy #2) had broken clips and I used the 3M adhesive.
common issue I assume then. Thanks for the tip. Will do that later
gambitThe OC · Aug 7, 2013#35
I'm interested in the door lock cables
cali yarisCanoga Park, CA · Aug 7, 2013#36
I realize this is a tiny request, but I need one of the bolt covers that cover the front wiper bolt.
It's a $4 part? Maybe just order one? <<Sale Price: $4.07>>
AstromanWenatchee, WA · Aug 7, 2013#37
Thanks Scott! It's been annoying having to manually change it as I had to keep my glovebox off. Keep me in mind for the other stuff too.
TickleTimeTimArkansas · Aug 8, 2013#38
How about driver seat belt (mine has a bad rip) and the black plastic cover that goes over the screw of the rear windshield wiper?
TickleTimeTimArkansas · Aug 8, 2013#39
Heck, price that with and without the right rear quarter panel to 72103
CTScottThread starterUSA, CT · Aug 8, 2013#40
Originally Posted by ZAKU ↑
How are the wiper arms? The paint on mine is flaking off and the metal undernath looks pitted :(
Wiper arms on this one are very good. Considering that there is not a speck of rust on the under carriage or exhaust, I don't think this car ever saw rain.
CTScottThread starterUSA, CT · Aug 8, 2013#41
Originally Posted by TickleTimeTim ↑
How about driver seat belt (mine has a bad rip) and the black plastic cover that goes over the screw of the rear windshield wiper?
I'd prefer to sell the hatch whole, as it is absolutely mint. If it was red, it would already be swapped onto Crashy 2. The rear quarter panel is sold already too.

The driver's seat belt is good, but the pretensioner would have popped with the airbag, so you would want the strapping portion, but not the pretensioner. I could do $15 for it, most of which would be the shipping cost because of the weight.
TickleTimeTimArkansas · Aug 8, 2013#42
The strap is all I need if it is possible to transfer it.
CTScottThread starterUSA, CT · Aug 8, 2013#43
Originally Posted by TickleTimeTim ↑
The strap is all I need if it is possible to transfer it.
It looks like it would be a bit of work to transfer it. I just pulled the driver's belt and It turns out though that the driver must not have been wearing it, as the pretensioner is not popped.

That makes it easy to install, but unfortunately though that makes it a whole lot more valuable. You'd be looking at $60 shipped for the good one.
ShinareOklahoma City, OK · Aug 8, 2013#44
Has the cabin air filter cover been spoken for? Mine was broken off when I bought the car.

Also, and its a big request... how much would it be for every plastic interior piece from the doors back (dont need the doors, but need everything back, including the hatch area and hatch).

That might be a hefty shipment to Oklahoma City, so its probably out of the question but my used 09 has MANY MANY terrible dog scratches in every plastic panel from the front doors back (the actual doors are pretty good). Realistically its probably more cost and trouble than its worth to try and make it all look better, but I thought I would ask anyway. :)
ShinareOklahoma City, OK · Aug 8, 2013#45
Also is that an after market air filter? Is that pricy? Worth having?
AltitudeColorado · Aug 8, 2013#46
Originally Posted by tk-421 ↑
It's really difficult to get used parts around here. I have no idea where they take the parts since I've been asking around, but no one is talking at the dealer.
You should probably try Tatooine.
dumbo0San Francisco, CA · Aug 8, 2013#47
How about the door panels? The white plastic trim.. I want those..
CTScottThread starterUSA, CT · Aug 8, 2013#48
Originally Posted by Shinare ↑
Also is that an after market air filter? Is that pricy? Worth having?
The interior plastics are already sold. The car's OEM air filter was damaged, so to run it I threw my spare AFE intake on it to start it up. I would be willing to sell it for $140 shipped.
CTScottThread starterUSA, CT · Aug 8, 2013#49
Originally Posted by dumbo0 ↑
How about the door panels? The white plastic trim.. I want those..
Door panels are sold. Which white plastic trim pieces are you looking for?
dumbo0San Francisco, CA · Aug 8, 2013#50
The white plastic trims, uhhm the arm rest.. Hehe