Yarisworld Archive

1zz Throttle body review/tips

155 posts · 147,750 views · page 3 of 4

Replies continued

phaznetYGK · Jul 3, 2015#101
Originally Posted by Rigaud ↑
You don't get the full benefit of the 1ZZ TB with a stock air intake pipe/filter and stock intake manifold. Everything is 46mm while the 1ZZ is about 55mm. I did the same as you at first but ended up installing a proper tube and filter. Next is the intake manifold and port polish the head. Only way to benefit 100%
What options do we have for changing our intake manifold?
scod4025Sacramento · Jul 3, 2015#102
I'm running a long runner golden eagle intake manifold that I got from micro image (may see if he can still get one for you) but have seen short runners from Golden Eagle and if you're looking at the TB i think some people run the corolla intake manifold but you have to modify it but from what I've seen looks like it would work better as its a smoother transition

Sent from my SM-G386T using Tapatalk
CrankyOldManWest Michigan · Jul 3, 2015#103
Originally Posted by phaznet ↑
What options do we have for changing our intake manifold?
Bolt-on options are pretty few and far between: golden eagle, MicroImage, and possibly Weapon-R. The Corolla manifold requires a custom TB adapter and machining a flange for the engine block. Tooter made a short run of them a few years back, and is no longer making them. If you want to go that route, I've posted a PDF of the flange dimensions in another thread.
bebeeloStockton, CA · Jul 3, 2015#104
Is it useless to have a 1zz tb on stock intake manifold then?
CrankyOldManWest Michigan · Jul 3, 2015#105
Originally Posted by bebeelo ↑
Is it useless to have a 1zz tb on stock intake manifold then?
No, you will still have increased throttle response. You just won't see the full benefit without supporting mods.

Sent from my XT1031 using Tapatalk
scod4025Sacramento · Jul 3, 2015#106
Hey just wondering if anyone has figured out what the stock air box cfm is, I know that the 1nz-fe flows about 170 cfm and the TB flows about 250? cfm, so if free flowing NA we are hurting our engine performance (noticed this as I accelerate better at about 3/4 throttle) anyone else look into this?

Sent from my SM-G386T using Tapatalk
RigaudRigaud, Quebec, Can. · Jul 3, 2015#107
The one I picked up is from an older celica from the late 90's, drive by cable and 3 stud mount for the TB. ports to the head match 100% however the bolt pattern doesn't. I just need to find time to go at my friends home machine shop, machine a new plate for both the TB and to mount on the head. Then cut and weld them, polish up the intake with a clear coat for a finish. I'll have time in a few weeks. The air intake I purchased a 45deg. 3" tube, tig welded a tube and machined maf mount then installed a K&N cone filter. I still have to finish my carbon fiber air box and tubing to take in cold air below the headlight somehow. This winter if budget allows it, the head comes off for a port polish and possibly cams. It's all about money and I have three cars that are not or will not be stock. lol
invader166Langley, BC · Jul 4, 2015#108
Originally Posted by CrankyOldMan ↑
Tooter made a short run of them a few years back, and is no longer making them. If you want to go that route, I've posted a PDF of the flange dimensions in another thread.
I'd actually be interested in going that route. It would be a cool project to take on. Which thread did you post the flange dimentions in?
phaznetYGK · Jul 4, 2015#109
Originally Posted by invader166 ↑
I'd actually be interested in going that route. It would be a cool project to take on. Which thread did you post the flange dimentions in?
Me too!
invader166Langley, BC · Jul 5, 2015#110
Update: Ok. Found the template for the flange that can connect the 1zz intake manifold runners to the 1NZ engine block intake ports.

Template for the Intake Manifold (1nzfe)

Beautiful piece of work. Thanks Cranky!🎉

Next, gotta find some info on the bolt pattern adaptor for the throttle body...
CrankyOldManWest Michigan · Jul 5, 2015#111
Originally Posted by invader166 ↑

Beautiful piece of work. Thanks Cranky!🎉

Next, gotta find some info on the bolt pattern adaptor for the throttle body...
Thanks. The other adapter plate was made by tooter, but I don't think he published the design. I may have the dimensions for both bolt patterns in my CAD library and could post them if I do.

Sent from my XT1031 using Tapatalk
tmontagueCaledonia Ont. · Aug 12, 2015#112
I'm thinking about doing this mod next spring to go along with my intake and header.

Rock auto only has the 031 TB listed. Will this one still work as long as you swap the chip from th stock TB?

Does anyone know an online source to find the 030 TB?

I will have to keep running the coolant to the TB due to where I live. Has anyone been able to run th stock hoses by just swapping them a previously stated?
scod4025Sacramento · Aug 12, 2015#113
About the hoses it's not hard to get a new piece of hose got one from auto zone cut to the length I needed for like 4 dollars

I couldn't find anywhere online that sold the TB but searched for toyota recyclers online near me and found quite a few that had them and cheaper then getting it though the auto parts stores

Sent from my SM-G386T using Tapatalk
tmontagueCaledonia Ont. · Aug 12, 2015#114
Thanks for the heads up. I'll likely buy extra hose just in case.

Did you give th recyclers the parts # for the TB and ask I they had it?
scod4025Sacramento · Aug 12, 2015#115
I just asked for the year and model that you want the TB from mine was from a 2006 corolla

Sent from my SM-G386T using Tapatalk
RigaudRigaud, Quebec, Can. · Aug 12, 2015#116
Found my 1zz TB on ebay one year ago and it was rebuilt new condition for $100 about. Same this year for my 1zz intake manifold and $40
Yargh-IsPortland · May 19, 2016#117
Hello Black_griffin6,

Quick question, do you happen to have a part number for that 1zz throttle body? I'm looking to install into my '09 Yaris hatchback, to complement my other mods (K&N cold air intake, Blitz supercharger, DC header, Magnaflow catalytic converter, and TRD exhaust).

Thanks!
Black_griffin6Thread starterAtlanta Georgia · May 24, 2016#118
Originally Posted by Yargh-Is ↑
Hello Black_griffin6,

Quick question, do you happen to have a part number for that 1zz throttle body? I'm looking to install into my '09 Yaris hatchback, to complement my other mods (K&N cold air intake, Blitz supercharger, DC header, Magnaflow catalytic converter, and TRD exhaust).

Thanks!
I do actually! The part number is 22030-0D030.

There's actually one for sale on ebay right here.
http://www.ebay.com/itm/2005-Toyota-...1XLsSG&vxp=mtr
NJP440Ohio · May 24, 2016#119
$73 shit I'd check a local junk yard first I picked mine up from a Pull A Part for $49

Sent from my SM-G920T using Tapatalk
Black_griffin6Thread starterAtlanta Georgia · May 24, 2016#120
Originally Posted by NJP440 ↑
$73 shit I'd check a local junk yard first I picked mine up from a Pull A Part for $49

Sent from my SM-G920T using Tapatalk
If you can find one at pull a part then that's the more desirable route.
My local pull a part doesn't have anything newer in it usually.
NJP440Ohio · May 24, 2016#121
Ah ok my local Pull A Part is full of Corollas right now lol

Sent from my SM-G920T using Tapatalk
CrankyOldManWest Michigan · May 24, 2016#122
Originally Posted by Yargh-Is ↑
Hello Black_griffin6,

Quick question, do you happen to have a part number for that 1zz throttle body? I'm looking to install into my '09 Yaris hatchback, to complement my other mods (K&N cold air intake, Blitz supercharger, DC header, Magnaflow catalytic converter, and TRD exhaust).

Thanks!
Do you plan to port your intake manifold? The stock TB gasket won't stay put or seal with the 1ZZ body, if I recall correctly.
Black_griffin6Thread starterAtlanta Georgia · May 24, 2016#123
Originally Posted by CrankyOldMan ↑
Do you plan to port your intake manifold? The stock TB gasket won't stay put or seal with the 1ZZ body, if I recall correctly.
If I recall correctly, it worked find for me. I just used some silicone gasket maker around the new throttle body just to ensure an airtight seal.
I might have did away with the stock TB gasket...this was a few years ago, I don't recall exactly. XD
tarkusYYZ · May 29, 2016#124
Originally Posted by thefalls ↑
Hi,can you share the full part number.
Thanks.

Edit* Found it.
22030-0D030
I've found one on eBay, shown as a 22030-0D031. Anyone know what that is? Or is it probably just a typo?
SirDigbyDenver, Colorado · May 30, 2016#125
Originally Posted by tarkus ↑
I've found one on eBay, shown as a 22030-0D031. Anyone know what that is? Or is it probably just a typo?
it doesn't matter the part number. I got one off a matrix. (0d030)
you should just do the chip swap and adjust the COLD idle screw and it works great.

the chip swap is super-doper pooper-scooper easy. you just drill out the rivets on both TBs and swap the back covers. install bolts and nuts to secure. no wiring or soldering. it's 99.99999% impossible to do anything wrong. go to a local junkyard or pull-and-save or whatever to get the best price, and you can have one tomorrow!

here's mine. had it for 3 months now. LOVE IT!!!
Link to a thread or page that is not in the archive
codemonkey23Philippines · Jun 23, 2016#126
is this plug and play?
NJP440Ohio · Jun 23, 2016#127
Originally Posted by codemonkey23 ↑
is this plug and play?
Just have to follow what the comment above you says and you'll be good

Sent from my SM-G920T using Tapatalk
codemonkey23Philippines · Jun 27, 2016#128
Originally Posted by NJP440 ↑
Just have to follow what the comment above you says and you'll be good

Sent from my SM-G920T using Tapatalk
thanks for your response..

i have saved some important pointers from this thread about the swap.

another question is do we need to have a piggyback ECU to tune the A/F mixture? since we are running 55mm TB, doesn't that make the fuel mixtures lean?


so basically what i understood on my back-read.
  • 1st slap in 1zz-fe TB in the intake manifold. screw 4 screw
  • plug the connector
  • look for the epoxied screw, and adjust idle to 600 - 700 rpm


then ENJOY??
tarkusYYZ · Jun 27, 2016#129
You've forgotten about the chip swap. Not sure though if the swap is required for the 0D030 TB version.

Sent from my LG-D801 using Tapatalk
codemonkey23Philippines · Jun 27, 2016#130
Originally Posted by tarkus ↑
You've forgotten about the chip swap. Not sure though if the swap is required for the 0D030 TB version.

Sent from my LG-D801 using Tapatalk
oh.. right.. i have to re read about that chip swap.. i don't think it was discussed here in detail
FluxtasyMalaysia · Jun 28, 2016#131
I bought the 0D030 and did not require a chip swap
codemonkey23Philippines · Jun 29, 2016#132
hello everyone,

what is the chip swap for?

i mean every throttle body has a wiring socket right? so i will just unplug the wire socket from the 2nzfe TB then snap it into 1zzfe TB? then check if the butterfly opens when accelerator is depressed?

i am confused.. if the TB works why do i have to swap the chip?

and what is the chip? can sombody post a picture of the chip? :D :D i only know potato chips :D :D
FluxtasyMalaysia · Jun 29, 2016#133
I believe you will have idling issues if you don't do the chip swap. Try to source a 0D030 TB and save yourself the hassle on the chip swap. There's a thread somewhere on it.
codemonkey23Philippines · Jun 29, 2016#134
Originally Posted by Fluxtasy ↑
I believe you will have idling issues if you don't do the chip swap. Try to source a 0D030 TB and save yourself the hassle on the chip swap. There's a thread somewhere on it.
oh i thought that i can fix idling issues by removing the epoxy on the allen screw of the TB? turn it 1 round counter clockwise?

thanks for replying
tarkusYYZ · Jun 30, 2016#135
You will need to adjust that screw as well. This is all explained in previous posts in this thread.

Sent from my LG-D801 using Tapatalk
codemonkey23Philippines · Jun 30, 2016#136
Originally Posted by tarkus ↑
You will need to adjust that screw as well. This is all explained in previous posts in this thread.

Sent from my LG-D801 using Tapatalk
yep.. but i guess the chip swap was not discussed
rabbitoThailand · Oct 29, 2016#137
Originally Posted by yariseggvvti ↑
How's the sounds like when you run 2.5" exhaust? Did you delete resonator and second CAT? Do you lose any lower end and getting more high end. VVTI kicks harder?

Thanks!
responding after 2 years later..lol...2nd cat delete do increase the flow and faster rpm gain...con is the bumble bee noise when accelerating up to 2000rpm, no more sound after 2000rpm 😣

Sent from my SM-J710F using Tapatalk
JessMessWaldorf Maryland · Nov 29, 2016#138
Does anybody know what years and models have the 1zz motor?? I do alot of junkyard shopping lol what car would i find the correct TB??
rabbitoThailand · Dec 1, 2016#139
Originally Posted by JessMess ↑
Does anybody know what years and models have the 1zz motor?? I do alot of junkyard shopping lol what car would i find the correct TB??
any 60mm should fit...you should look for steel intake manifold for corolla 1zz...this one is really hard to come by...you have to modify the adapter a little bit but out comes pretty crazy..

Sent from my SM-J710F using Tapatalk
Yaris874Nahant M.A · May 25, 2017#140
Uuuu

Sent from my SM-G935T using Tapatalk
NJP440Ohio · May 25, 2017#141
Are we reviving this thread? Lol

Sent from my LG-H918 using Tapatalk
Yaris874Nahant M.A · May 25, 2017#142
I was just thinking of putting the 1zz throttle body lol I wanna to read the thread later wat u think

Sent from my SM-G935T using Tapatalk
Yaris874Nahant M.A · May 25, 2017#143
And any 1zz fit ??

Sent from my SM-G935T using Tapatalk
NJP440Ohio · May 25, 2017#144
Originally Posted by Yaris874 ↑
I was just thinking of putting the 1zz throttle body lol I wanna to read the thread later wat u think

Sent from my SM-G935T using Tapatalk
I think its a good idea. I still haven't installed mine yet its just sitting in a box in my closet but I'm installing my header and cold air intake this Saturday so the throttle body will be the next install on my list. Ill post up pics and reviews once its installed. If you're on Facebook my name is Nicholas Prendergast and on Instagram I'm 2010egghatch I always post updates on both as well

Sent from my LG-H918 using Tapatalk
Yaris874Nahant M.A · May 25, 2017#145
I got u on Instagram I just ored a weapon r throttle control the u see those ?

Sent from my SM-G935T using Tapatalk
Yaris874Nahant M.A · May 25, 2017#146
The u know Wat throttle body

Sent from my SM-G935T using Tapatalk
NJP440Ohio · May 25, 2017#147
Originally Posted by Yaris874 ↑
The u know Wat throttle body

Sent from my SM-G935T using Tapatalk
Pics?

Sent from my LG-H918 using Tapatalk
Yaris874Nahant M.A · May 25, 2017#148
Wat car and year I saw some on ebay from matrix Corolla or Celica gt

Sent from my SM-G935T using Tapatalk
NJP440Ohio · May 25, 2017#149
Originally Posted by Yaris874 ↑
Wat car and year I saw some on ebay from matrix Corolla or Celica gt

Sent from my SM-G935T using Tapatalk
There's a part number above in the comments

Sent from my LG-H918 using Tapatalk
Yaris874Nahant M.A · May 25, 2017#150
Ok cool

Sent from my SM-G935T using Tapatalk