yariSB86Original postOH · Apr 7, 2013#1So I've finally made the call to go boosted. I'm going to install the Zage turbo kit.
Here is what I was thinking. Any and all input is greatly appreciated as this is my first turbo build.
Glowshift gauges: -Boost/vacuum
-Oil pressure
-Wideband (afr)
Auto Gauge: -Tachometer
Scan Gauge II -for code reading
Zage Turbo kit, including the AEM F/IC + Boomslang harness I've done some research to see what additional parts/misc items I may need. Its a long list, I feel confident it should suffice. With that said. Is there anything anyone would like to add/comment on? Feel free to add your .02. (if you suggest an item/misc part, I will simply quote you saying either its already on the list or thanking you for letting me know I need/should have it)
Thanks all.
-B
EDIT: References for shopping list/misc parts:
Preinstall guide Zage install guideReplies 108
Scubaru Stevecalgary · Apr 7, 2013#2sounds like a good list,
one thing i would steer clear of are the glow shift gauges.
i installed them on the echo. the boost guage is not accurate unless you are at sea level
and the buttons rattle like crazy.
go all autometer, as for wideband spend the money and get a good one.
innovate (my favourite) you can calibrate and cheep replacement sensors
aem wideband is also a great option.
if doing a boost controler just get the aem trueboost and call it a day.
Good list. I would upgrade the oil return off the turbo.
yariSB86Thread starterOH · Apr 7, 2013#4@Scubaru - How would the boost gauge not be accurate unless at sea level?
@Kou - how would I upgrade the oil return line?
cali yarisCanoga Park, CA · Apr 7, 2013#5^ The best install is to run the oil return line into the block, above the oil line. There are pictures and a thread about it. You just need a couple of fittings and a line. I would still use the Zage pan provided with the plug that comes with it.
On the gauges, at the very least spend the extra money for a really good air/fuel gauge. It will become your intimate friend.
yariSB86Thread starterOH · Apr 7, 2013#6@Garm - Are you referring to "tapping into the block" for the oil return?
fnkngrvIn The Hotbox · Apr 7, 2013#7 Originally Posted by
Scubaru Steve ↑ go all autometer, as for wideband spend the money and get a good on
I really like having my Autometer gear...was a great investment.
Originally Posted by
cali yaris ↑ It will become your intimate friend.
+1 ... you would be shocked to know what is really happening if you didn't have one that is solid and the correct installation location of the bung.
Originally Posted by
yariSB86 ↑ @Garm - Are you referring to "tapping into the block" for the oil return?
Don't get confused...it isn't actually the block. It is the upper oil pan sub assembly. 👍
Other than that I would go with something other than the F/IC. I know that there are plenty of folks that would argue with me, but after having 2 of them in less than 2 years, having shotty telephone support (lack of knowledge by staff), and personally running into others that do autocross, 1/4 mile, speed runs, etc I won't be installing another one. If you can really swing it take the additional funds and go with an "upgraded" solution over the F/IC.
Scubaru Stevecalgary · Apr 7, 2013#8[QUOTE=yariSB86;693373]@Scubaru - How would the boost gauge not be accurate unless at sea level?
as you gain in elevation it thinks your in vacuum, im at 4000, ft.. i need 5psi to show i hit boost. i have replaced
the gauge and even called glow shift. they said sorry, there is no way to calibrate it.
the colors, peak, and hold are cool. but in my opinion they are only for show.
i have autometers, aem, innovate, glowshift and Defi.
once you have a quality set of instruments you wont go back.
http://www.egauges.com/ these are expensive but amazing! dont need a controler
Defi Prosport is also a decent entry level gauge. they have come a long way.
cali yarisCanoga Park, CA · Apr 8, 2013#9 Don't get confused...it isn't actually the block. It is the upper oil pan sub assembly.
That part unbolts from the block? I didn't know that.
Focus_Sh1ftNew Jersey · Apr 8, 2013#10This thread. I like this.
I can't speak for the quality of glowshift gauges, but like everyone else has said, splurge on a good wideband. That's by far the most important, especially if you're self-tuning. I'd also recommend avoiding mechanical oil pressure gauges. I've had oil end up places it shouldn't be. 😛
Another thing - if you don't want to waste money on another bov, don't worry about it. I was using the Zage bov for the last two months and finally got it working consistently. Turns out there was too much preload (and you have to loosen it to a practically uncomfortable point of preload).
How will you be tuning? And who will be doing it?
fnkngrvIn The Hotbox · Apr 8, 2013#11 Originally Posted by
cali yaris ↑ That part unbolts from the block? I didn't know that.
Yes sir. I have a spare one sitting in my garage right now that will replace the one that is currently on my installed motor.
fnkngrvIn The Hotbox · Apr 8, 2013#12 Originally Posted by
Focus_Sh1ft ↑ I'd also recommend avoiding mechanical oil pressure gauges. I've had oil end up places it shouldn't be. 😛
How would a digital OPG be of more benefit? I have the mechanical Autometer that goes from 0-100psi. I did have to replace the sending unit, but that was because of what happened when my first motor blew up. Other than that it has worked flawlessly. 🤷
cali yarisCanoga Park, CA · Apr 8, 2013#13^ mechanical means oil actually goes to the gauge in a line. No sending unit.
It has nothing to do with digital vs. analog display on the gauge.
BEEFnorth carolina · Apr 8, 2013#14I had a friend that had a mechanical oil gauge on his steering column. he always kept a rag under it... it always leaked. It was nasty but free.
Originally Posted by
yariSB86 ↑ @Scubaru - How would the boost gauge not be accurate unless at sea level?
@Kou - how would I upgrade the oil return line?
This is what I am going to use for the oil return 10AN XRP hose end fittings and some push lock hose.
1 attachment not included in this copy
fnkngrvIn The Hotbox · Apr 8, 2013#16 Originally Posted by
cali yaris ↑ ^ mechanical means oil actually goes to the gauge in a line. No sending unit.
It has nothing to do with digital vs. analog display on the gauge.
aaahhh....gotcha...thanks for the clarification :)
fnkngrvIn The Hotbox · Apr 8, 2013#17 Originally Posted by
cali yaris ↑ That part unbolts from the block? I didn't know that.
Here is a photo and yes I flipped it upside down to make it easier orientation-wise...haha 😁
Picture not included in this copy yariSB86Thread starterOH · Apr 8, 2013#18 Originally Posted by
Focus_Sh1ft ↑ This thread. I like this.
I can't speak for the quality of glowshift gauges, but like everyone else has said, splurge on a good wideband. That's by far the most important, especially if you're self-tuning. I'd also recommend avoiding mechanical oil pressure gauges. I've had oil end up places it shouldn't be. 😛
Another thing - if you don't want to waste money on another bov, don't worry about it. I was using the Zage bov for the last two months and finally got it working consistently. Turns out there was too much preload (and you have to loosen it to a practically uncomfortable point of preload).
How will you be tuning? And who will be doing it?
I've heard bad things about the zage bov, was yours set low out of the box?
I was planning on tuning the F/IC myself and getting the actual car tuned professionally. Where I have yet to find >_<
fnkngrvIn The Hotbox · Apr 8, 2013#19 Originally Posted by
yariSB86 ↑ I've heard bad things about the zage bov, was yours set low out of the box?
I was planning on tuning the F/IC myself and getting the actual car tuned professionally. Where I have yet to find >_<
How do you mean the F/IC yourself the actual car tuned yourself? If you are using an F/IC then that is what you are tuning (retarding timing, fuel maps, etc) 🤷
What else is there to tune?
yariSB86Thread starterOH · Apr 8, 2013#20Isn't the F/IC limited in what it can tune? Wouldn't I need to get the ECU remapped?
I was under the impression this would have to be done to get most out of the engine.
fnkngrvIn The Hotbox · Apr 8, 2013#21The Yaris ECU is locked and cannot be remapped. Your only option is to go full standalone. There are varying opinions on how effective using a piggyback is depending really on your goals.
yariSB86Thread starterOH · Apr 8, 2013#22I did not know that. Thanks.
How difficult is tuning with the F/IC if I were to do it myself?
Scubaru Stevecalgary · Apr 9, 2013#23 Originally Posted by
yariSB86 ↑ I did not know that. Thanks.
How difficult is tuning with the F/IC if I were to do it myself?
if you have an idea its not to bad, take your time, have a good scan tool.
yariSB86Thread starterOH · Apr 9, 2013#24I'm using the scan gauge II. I should be alright, hopefully. Lol.
fnkngrvIn The Hotbox · Apr 9, 2013#25 Originally Posted by
yariSB86 ↑ I'm using the scan gauge II. I should be alright, hopefully. Lol.
have you ever owned or had any experience with turbo applications?
Focus_Sh1ftNew Jersey · Apr 9, 2013#26 How difficult is tuning with the F/IC if I were to do it myself?
Very simple.
If you're just trying to make a boosted daily driver (I assume you are, otherwise you'd have went custom), you really won't need to tune anything else beyond afrs. If you're having predetonation problems, you'll want to do some work on ignition timing though. I run 93 octane and never have had predetonation.
Also, if you're tuning in open loop - you're pretty much required to know how to adjust the afrs. Big changes in weather will throw off your entire map. Example: It was in the 40's last week, and now it's in the 70's. I had to richen my entire map to compensate.
BEEFnorth carolina · Apr 9, 2013#27 Originally Posted by
yariSB86 ↑ I'm using the scan gauge II. I should be alright, hopefully. Lol.
The scangauge 2 is an awsome tool but I think you need something that is going to show you more stuff. I think the scangauge shows A/F in what the ECU is trying to achieve, not what it actually has. I think at the least you are going to need a good AFR meter...
(as a disclaimer, I am not boosted)
fnkngrvIn The Hotbox · Apr 9, 2013#28Also realize that every motor is different so even though someone might be able to give you a base set of maps to go from DO NOT just drop them in and call it a day. Even though you want to do it on your own is there a shop that you can become acquainted with that could assist you? Teach you the ropes?
yariSB86Thread starterOH · Apr 9, 2013#29Thanks for all the input guys.
Is $240 a good price for a set of 1zz injectors?
NO i found a set on ebay used fo $70
fnkngrvIn The Hotbox · Apr 9, 2013#31 Originally Posted by
yariSB86 ↑ Thanks for all the input guys.
Is $240 a good price for a set of 1zz injectors?
Are they brand new or used?
yariSB86Thread starterOH · Apr 9, 2013#32$240 was for brand new oem replacements. I found a better set for 150
cali yarisCanoga Park, CA · Apr 9, 2013#33^ well done!
yariSB86Thread starterOH · Apr 10, 2013#34Thanks Garm! ;)
mazillaSan Jacinto California · Apr 10, 2013#35Following along, pretty much in the same boat as the OP (boost)experience wise with a pile of parts ready to go.
ilikericesavannah, ga · Apr 10, 2013#36Damn. I wanna be in the boosted club. One day I will have my build thread.
Good luck on yours. I will be following it also
yariSB86Thread starterOH · Apr 10, 2013#37Thanks guys!
yariSB86Thread starterOH · Apr 10, 2013#38My old tach was that model gauge. I went with the blue digital LEDs for boost, oil pressure, and the digital wideband.
yariSB86Thread starterOH · Apr 10, 2013#39All the gauges and a-pillar pod came in today. I'm going to take a look into getting everything mounted and running wires over the weekend. Also going to install my new headlights. So should be a busy weekend!
The turbo kit and f/ic should be here next week.
why?harnett county NC · Apr 10, 2013#40 Originally Posted by
ilikerice ↑ Damn. I wanna be in the boosted club. One day I will have my build thread.
Good luck on yours. I will be following it also
mine will be really easy. Found a mechanic to install it.
done.
i'd kill myself if i tried it myself. or maybe just rip both hands off with something.
yariSB86Thread starterOH · Apr 12, 2013#41Head lights are going in! Pics to follow. Going to start the gauges and a-pillar pod later tonight. Gotta take a boat ride real quick. Bbl!
mazillaSan Jacinto California · Apr 12, 2013#42 Originally Posted by
yariSB86 ↑ Head lights are going in! Pics to follow. Going to start the gauges and a-pillar pod later tonight. Gotta take a boat ride real quick. Bbl!
Isn't it always like that? Every time I want to work on a project, BOOM I gotta take a boat ride. Important meeting? Not until I take this boat ride son....boat ride this, boat ride that...Neptune's beard!!
yariSB86Thread starterOH · Apr 12, 2013#43Lol. I'm in the USCG. I was power trialing one of our boats after it had its turbo replaced.
yariSB86Thread starterOH · Apr 12, 2013#44Head lights are installed and work great.
Had a little snag getting my a-pillar to fit right. It mounts onto the the factory a-pillar so I had to do some drimel work to make it fit the way I like it.
I started getting the gauges ready to mount. Boy there is a lot to them lol. I'm basically just running the wires that connect to the gauges behind the a-pillar. Ill connect everything at a later point.
Not to fret, pics will be posted tomorrow. :)
fnkngrvIn The Hotbox · Apr 13, 2013#45 Originally Posted by
yariSB86 ↑ Head lights are installed and work great.
Had a little snag getting my a-pillar to fit right. It mounts onto the the factory a-pillar so I had to do some drimel work to make it fit the way I like it.
I started getting the gauges ready to mount. Boy there is a lot to them lol. I'm basically just running the wires that connect to the gauges behind the a-pillar. Ill connect everything at a later point.
Not to fret, pics will be posted tomorrow. :)
Yeah...the amount of wiring involved is actually somewhat ridiculous. I left myself with two additional pos/neg sets with my install just in case for down the road to save the headache of routing again.
mazillaSan Jacinto California · Apr 13, 2013#46I have three terminals in the glovebox(and the led lighting I added to the gloveboxes) in mine, one 12V, dash lights(via the box, not the dimmer switch) an ground...each new gauge gets most of it's wiring done right there, makes life a lot easier.
Picture not included in this copy
yariSB86Thread starterOH · Apr 14, 2013#47Gauge pod is filled and mounted.
Boost is wired in.
Oil is powered, not fully connected. I didn't feel like getting all oily this late. Ill do it at a later point.
Afr harness is run. Still need to get the rest of that setup.
New tach is installed. I'm not liking how bright it is at night, so I'm going to wire in an adjustable resistor.
Pics will be up tomorrow.
On a side note. My rear sway bar and scan gauge II arrived yesterday!
mazillaSan Jacinto California · Apr 14, 2013#48nice, moving right along...
yariSB86Thread starterOH · Apr 14, 2013#49As promised.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
fnkngrvIn The Hotbox · Apr 17, 2013#50 Originally Posted by TOLMACH ↑
^ So this is that GlowShift a-pillar podium that they sell for like 25 bucks? Looking pretty good. Seems like a tight fit.
I bought a few sets of them to actually chop up to make custom pillars.