mr_milesOriginal postPortland, OR · Jan 12, 2013#1Shame on me for not posting a build thread here too!
here's the link to the thread on MI, but I plan on updating this one as well as frequently as the other one.
http://www.microimageonline.com/foru...0-build-thread!
Long story short, 2013 yaris, etc. We go from this...
Picture not included in this copy to this....
Picture not included in this copy to this....
Picture not included in this copy and finally....this! (rear shocks still blown)
Picture not included in this copy Picture not included in this copy Picture not included in this copy Picture not included in this copy Misc other things that have been done:
CAI
interior gut
window tint (pics asap)
just installed my bucket seats from 1.0 (pics also soon)
MI underpanel
-2 degrees of camber up front, going to -3 front and rear soon
Replies 195
JabroNew Orleans · Jan 12, 2013#2 Originally Posted by TPA5 ↑
Those black rims are hot, which are they?
Car looks clean, I like everything but the stickers, but that's a personal opinion. I just am not a huge fan of having cuss words splayed over the back window of cars. Just my opinion though, I do really like the car.
+1
WeeYariGeorgetown, Ontario, Canada · Jan 12, 2013#3 Originally Posted by TPA5 ↑
I just am not a huge fan of having cuss words splayed over the back window of cars. Just my opinion though, I do really like the car.
But he's cussing on the front window. Does that make any difference? 😁
yarisugiハワイ · Jan 12, 2013#4 Originally Posted by TPA5 ↑
Those black rims are hot, which are they?
Enkei 92.
Need more pics at better angle NOW!
muffin_topMidwest · Jan 15, 2013#5The stance on the 92's is spot on!!
mr_milesThread starterPortland, OR · Jan 15, 2013#6hehe, sorry for the delay in updates - been fairly busy doing misc things around the house. updates asap, I promise!
yPod09Santa Rosa, CA · Jan 16, 2013#7Looks REALLY good. Great tire/wheel sizing combination, looks like a slight amount of stretch.
What happened to the gold wheels? Those are some of my favorites ever!
mr_milesThread starterPortland, OR · Jan 16, 2013#8The enkei 92's are 15x8 +25mm offset, with 195/50 series tires :). i got rid of the 522's a long time ago, traded them for the D2's. Now I'm probably trading the d2's this week lol. Maybe for some 0 offset wheels....either way im sure you guys will see them :p
mr_milesThread starterPortland, OR · Jan 16, 2013#9Hokai. Some updates, yo!
here it is all tinted,Right before I bathed her. It's apparently a 38% tint, which according to the tint guys, evens out to about 35 after installation (because of the slight tint yaris windows apparently have), so i'm at the legal limit in Oregon. They used some sort of "carbon series" tint, which apparently good. LOL BEATS ME I DUN NO NUTHIN BOUT NO TINT. *I went with this shop as he was a childhood friend of one of my good friends, got a discount, lifetime warranty, and they'll change it to whatever I want if i ask*
Picture not included in this copy
Oh look, you can see the D2's inside. Was going to trade them but the guy lied about the condition of his wheels, so NO GO.
Picture not included in this copy
A shot of the vinyl work. Absolutely craptacular. The vinyl ripped and stretched way to easy when I applied any heat. Fortunately, this was bought solely to test wrapping awkward pieces like that, so it's 3 dollars not particularly wasted. For some reason I couldn't get the wrinkles out of the folded over edges. any pros with suggestions on how to do it? I've always wrapped large flat pieces, or small simple things. any help on folding corners and stuff is appreciated!
Picture not included in this copy
Interior shot of how I'm rolling as of the moment. Gotta finish the speakers, asap. I need my damned music, dear god.
Picture not included in this copy
And finally, the exhaust! It's way low to the ground, and to think i'm actually riding higher than I normally do! this will be interesting...
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
overall I'm surprisingly pleased with how the TI-C sounds. it's not loud at all. at an idle it's very smooth. sounds a little ballsy when I step on it, but not ricey or fart-canish at all! The video's make it sound borderline aggravating, but IMO it sounds nothing at all like it does on youtube.
b20vtegmaricopa, az · Jan 18, 2013#10sexy! bro, what shiftknob are you using? wish my mugen knob fit the yaris lol...
mr_milesThread starterPortland, OR · Jan 18, 2013#11b20vtegmaricopa, az · Jan 19, 2013#12 Originally Posted by
mr_miles ↑
what threading should i choose? 😕
sorry, i'm an idiot.
yarisugiハワイ · Jan 19, 2013#13The one that says (Toyota/Scion/Subaru) on that site.
(M12 x1.25)
b20vtegmaricopa, az · Jan 19, 2013#14 Originally Posted by
yarisugi ↑ The one that says (Toyota/Scion/Subaru) on that site.
(M12 x1.25)
thanks bud! 👍
b20vtegmaricopa, az · Jan 20, 2013#15btw, do they have any other colors besides what's on the site? :S
mr_milesThread starterPortland, OR · Jan 21, 2013#16It seems they rotate colors out periodically on the site.
Updates tomorrow maybe, going to tinker and finish up some stuff, i hope :)
CPALK719Hollywood, Florida · Jan 22, 2013#17Not sure as to what you vinyl wrapped. but any more info on the carbon fiber on the dash area??? i was thinking of getting or trying to make a carbon piece for that area around the radio. it looks good !!
Absolutely Red 12Your moms house. · Jan 22, 2013#18 Originally Posted by
mr_miles ↑
overall I'm surprisingly pleased with how the TI-C sounds. it's not loud at all. at an idle it's very smooth. sounds a little ballsy when I step on it, but not ricey or fart-canish at all! The video's make it sound borderline aggravating, but IMO it sounds nothing at all like it does on youtube.
Is the silencer still in the tip??
mr_milesThread starterPortland, OR · Jan 22, 2013#19the carbon fiber that's on the dash is the stuff that I wrapped :p Going to be re-doing it soon, lol. It's crappy.
Currently the silencer is out, but in the pictures and my first impressions like in that post are with the silencer in. I like it both ways, so I figure I'll roll with it out for a few until I get tired of the noise, then put it back in. Even with the silencer out, it's not terrible. it drones a little bit at say 1900 rpm, but that it. I LOVE the idle sound it has without it, too. I'll try and record it.
mr_milesThread starterPortland, OR · Jan 23, 2013#20Oh look, Eyelids.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
At night I'll take a photo of them with the lights on, so you can see the neat little strip that light up on top. we didn't run vinyl there because we weren't confident in getting it on with no bubbles.
yarisugiハワイ · Jan 23, 2013#21Best DIY and affordable mod yet!
Did you cut then apply or apply then cut?
Why so much rain?
mr_milesThread starterPortland, OR · Jan 23, 2013#22Apply then cut - So much rain because Oregon. Never, ever, move here. EVER. I hate it.
SilverSquash!South Africa · Jan 24, 2013#23Are these eyelids cut from vinyl or are they fiberglass ones?
yarisugiハワイ · Jan 24, 2013#24read post #23.
you got some steady hands mr miles.
SilverSquash!South Africa · Jan 24, 2013#25Ahaa....thanks yarisugi
CPALK719Hollywood, Florida · Jan 30, 2013#26 Originally Posted by
mr_miles ↑ the carbon fiber that's on the dash is the stuff that I wrapped :p Going to be re-doing it soon, lol. It's crappy.
Currently the silencer is out, but in the pictures and my first impressions like in that post are with the silencer in. I like it both ways, so I figure I'll roll with it out for a few until I get tired of the noise, then put it back in. Even with the silencer out, it's not terrible. it drones a little bit at say 1900 rpm, but that it. I LOVE the idle sound it has without it, too. I'll try and record it.
i was wondering how you were able to stick the cf wrap onto that portion of the dash, considering the surface has all those little dots which would make it harder to stick.
I'm definetly digging those eyelids, did you costum make them or bought them somewhere ?
yarisugiハワイ · Jan 30, 2013#27He cut it from a sheet of vinyl wrap. It looks pretty professional though.
mr_milesThread starterPortland, OR · Jan 31, 2013#28 Originally Posted by
CPALK719 ↑ i was wondering how you were able to stick the cf wrap onto that portion of the dash, considering the surface has all those little dots which would make it harder to stick.
the vinyl I had held to it pretty well, actually. I wasn't expecting to to do so, but it's pretty well on there.I'm redo-ing it soon, got some more vinyl in. also, my shock warranty came back, so yay I can put my car back where it usually rides.
mr_milesThread starterPortland, OR · Feb 5, 2013#29Weee I did stuff. - 3 degree spacers? oh hell yes.
I like this pic because it makes it look like only one wheel is cambered.
Picture not included in this copy
Picture not included in this copy
This is my current ride height until summer - THEN LOWER. I think overall, the MI underpanel and sub frame are about 2 inches off the ground. I'll measure tomorrow if it's not raining because we all need an accurate measurement.
Picture not included in this copy
I put my second warranty shock back in, so I'm finally rollin proper now. Feels good, man. Other than that, haven't messed with too much lately - been working on that carbon fiber vinyl for fun, i've got a few pieces up here in my desk. I'm extending the dimmer switch wires so i can put it down in the center console with the traction control button, and i replaced the OEM bluetooth mic with my aftermarket one inside the dash so I could use it with my Kenwood. I've also got all 4 speaker adapter plates sitting on my desk, and hopefully will be taking my front bumper off to install my horn. Will also attempt removing the headliner and installing the sticker bombed bazooka sub and 5 panel wink mirror.
vtencolumbus · Feb 5, 2013#30Ooh me likey !! Matt can you post a pic on how the camber attach to the hub pls ? I have the rear disc conversion and wondering if I can add the camber on .
Thx man
mr_milesThread starterPortland, OR · Feb 5, 2013#31Definetly - I'll take one tomorrow when it's light out. Im assuming it would work, since it goes torsion beam, spacer , hub. but yes, pics you shall get.
b20vtegmaricopa, az · Feb 8, 2013#32noice pics bro!
mr_milesThread starterPortland, OR · Feb 8, 2013#33dang rain slowed my pic taking vten, ill get that asap lol
yarisugiハワイ · Feb 8, 2013#34Portland sure rains a lot.
Watched several episodes of Portlandia.
Strange but funny comedy. Are people like that there? j/k
mr_milesThread starterPortland, OR · Feb 8, 2013#35I've never watched it.....but if it makes the people here out to be bigots and hipsters, then yes, it's right.
Lol. (I dislike living here)
Pur_BluEast Bay, Castro Valley · Feb 9, 2013#36Your car reminds me of mine just 2012 vs my 2007. Nice to see someone not scared of a lil rear camber!! Looks great
mr_milesThread starterPortland, OR · Feb 9, 2013#37you can get it cheap on fleabay, and my secret to straight lines is blue painters tape. my hands shake too, so for larger pieces where im making a line I do that.
1.5Tampa · Feb 9, 2013#38 Originally Posted by
mr_miles ↑ Picture not included in this copy
I love this shot of 1.0
camber came out nice... wish I could have settled for the -3 unfortunately -6 will have to do for now
mr_milesThread starterPortland, OR · Feb 9, 2013#39you got the -5 degree spacers? you dog, you! lol 1.0 is all torn apart there...poor thing
mr_milesThread starterPortland, OR · Feb 11, 2013#40here's that pic, Vten. If you look between the hub and the torsion beam, you can just see where the spacer is sticking out :) it should fit fine with the disc rear.
Picture not included in this copy
J.A.R.V.I.S.socal · Feb 11, 2013#41^ im interested in some camber for my ride. i was wondering the brand you used to get that -5. thanks man
mr_milesThread starterPortland, OR · Feb 11, 2013#42They came from realcamber.com
I will say - I'm extremely pleased with the product, but the guy was interesting to deal with. extremely lazy. 1.5 and I had to send him multiple emails to get him to ship in a timely manner......but.....great product lol. I bet if we harassed him and reminded him that lots of yarii would buy these, he'd be more willing.
DeathBeardLos Angeles, CA · Feb 12, 2013#43Is that just a washer your using? Car is looking good
mr_milesThread starterPortland, OR · Feb 12, 2013#44No, they're big spacers.
http://www.realcamber.com/images/3degshot.jpg I feel slightly more comfortable knowing they're one big piece doing the work.
Friend of mine just got -3 for his xb (lol he's mad that I got them first, he tries to pull the everyone copies him routine rofl) but his spacers are two piece. it's weird. I'll try and snap a photo for you guys if he hasn't put them in yet.
1.5Tampa · Feb 12, 2013#45 Originally Posted by
mr_miles ↑ They came from realcamber.com
I will say - I'm extremely pleased with the product, but the guy was interesting to deal with. extremely lazy. 1.5 and I had to send him multiple emails to get him to ship in a timely manner......but.....great product lol. I bet if we harassed him and reminded him that lots of yarii would buy these, he'd be more willing.
this lol I sent payment on 12/27 and i think i got them on like 1/24 and I kept emailing him like once every 3 days and he would always say "im busy I will ship tomorrow" Miles and I were pretty close to paypal claiming him other than that, it is a fine piece, great machine work, fitment is perfect, I am happy
They are expensive though. We paid 150.00 each cuz we got a 2 order bulk discount
mr_milesThread starterPortland, OR · Feb 12, 2013#46Indeed - I think if we were to do a group buy, we could get them for less.
Goodbye headliner + side airbags. I will not miss you. Removing airbags is a bitch.
Picture not included in this copy
Oh dear....what's this? I herd you liek Mudki- I mean...stickers.
Picture not included in this copy
More photo's later, etc. aggravated at meaningless things :p
Picture not included in this copy
4/20 NEVER FORGETPortland, OR · Feb 12, 2013#47God damn. I bet the car feels quite a bit different with all of that weight stripped. Once I move into my new place I plan on removing my rear seats and making a panel so the back is flat so I can easily move stuff.
I look forward to checking out your ride sometime at a meet. I love the way the new Yaris looks, good job on it so far.
muffin_topMidwest · Feb 12, 2013#48It is blasphemy of the highest order to place a Mugen decal on a Toyota.. 😛
1.5Tampa · Feb 12, 2013#49Yeah Mugen... to match the drift sticker lol
mr_milesThread starterPortland, OR · Feb 13, 2013#50Haha, I know, I know. I debated not using them, but then I enjoy the people who are like "lol a drift sticker on a fwd car"