Yarisworld Archive

My build thread (Gnar Gnar 2.0)

196 posts · 75,025 views · page 4 of 4

Replies continued

mr_milesThread starterPortland, OR · Jun 3, 2013#151
A little preview of things to come. Next time they're on i'm going to do a little body work *evil grin* because as usual - not low enough

Picture not included in this copy
SeptembersrainSan Antonio · Jun 3, 2013#152
I like!! I really want to find red ringed black rims.
I just can't find many that I actually like that'll fit stock. =\
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Jun 4, 2013#153
Originally Posted by Septembersrain ↑
I like!! I really want to find red ringed black rims.
I just can't find many that I actually like that'll fit stock. =\
Yeah, there's something about black and red together. Re Yari, makes me think about that black and red 3rd Gen 3-Door pulling the black and red trailer in the Home Depot (?) lot -- (padre1964 ?).

I really have to hand it to you, mazilla, mr.miles, etc. I had one black car for 90k + miles, and I don't think I'd want to do again what it entails to keep a black car looking good. The effort is worth it though.....the TLC shows (IMO more than with other colors).
Eren_13London, UK · Jun 4, 2013#154
Looking good! Making me want to change my rims on this now. What size rims and tires are you using there? Wondering if I can go to 17" on mine.
1.5Tampa · Jun 4, 2013#155
So jelly Miles!

@eren 17x8 +30 wheels 205/40/17 tires i think

Yes you can run 17s ive done it too
Eren_13London, UK · Jun 4, 2013#156
Originally Posted by 1.5 ↑
So jelly Miles!

@eren 17x8 +30 wheels 205/40/17 tires i think

Yes you can run 17s ive done it too

Thanks 1.5 much appreciated 👍
HANZO_187Wintergarden, FL · Jun 4, 2013#157
Originally Posted by Septembersrain ↑
I like!! I really want to find red ringed black rims.
I just can't find many that I actually like that'll fit stock. =\
I know Motegi, Konig and XXR wheels have the red trim your looking for but as you had said it may or may not fit the stock tires. JUST keep in mind that when your wheels get dirty you'll notice it quickly cause the dirt can settle in the red area. I seen a set of Black/Red Motegi wheels. It made me rethink a lot of my wheel choices.
TOUGEghostKauai · Jun 4, 2013#158
Originally Posted by mr_miles ↑
That looks awesome. 👍 I never really liked the new body style, but this car is making me change my mind. It looks really good in black, especially when it's slammed like that.
mr_milesThread starterPortland, OR · Jun 4, 2013#159
thanks guys, you're making me blush! lol @nook, I get ocd about keeping my car super clean, im always washing and waxing it. i'm constantly asked at shows how I keep it looking new, too. :)
Dperrybushkill, pa · Jun 9, 2013#160
how much camber r u running up front?
mr_milesThread starterPortland, OR · Jun 9, 2013#161
-2 degrees :)
Dperrybushkill, pa · Jun 9, 2013#162
did u have to buy anything special to get -2?
mr_milesThread starterPortland, OR · Jun 9, 2013#163
yes, you need camber bolts to acheive that. Garm and Jeff sell them :) if I was at home I'd link you to them but I'm on my phone.
x3kensterSOCAL · Jun 12, 2013#164
Your car looks great! Ill keep checking back here for more updates but so far it looks like its going in the right direction for the stance scene. Also, it looks like we have the same taste... ;)

x3kenster's Prius C build
mr_milesThread starterPortland, OR · Jun 13, 2013#166
Thanks Phil :p

also....that Prius. I like!
x3kensterSOCAL · Jun 27, 2013#168
I like the carbon fiber layover. What size tires are u running? They look alot thinner than my 205/40s
mr_milesThread starterPortland, OR · Jun 27, 2013#169
they are 205 40's. falkens tend to be skinnier than other tires :)
x3kensterSOCAL · Jun 27, 2013#170
Which falkens? I'm running the ziex 912s
mr_milesThread starterPortland, OR · Jun 27, 2013#171
Those are what I'm running as well. What wheels do you have them on?
SeptembersrainSan Antonio · Jun 27, 2013#172
Yum. Those rims are sexy. I would totally drool over your car.
yarisugiハワイ · Jun 27, 2013#173
considering his OCD, I don't think he'd appreciate your drools. 😁
x3kensterSOCAL · Jun 27, 2013#175
Originally Posted by mr_miles ↑
Those are what I'm running as well. What wheels do you have them on?
my blq +20
mr_milesThread starterPortland, OR · Jul 30, 2013#176
I'm still alive! Slow season at work is starting now which means I'll actually have all my free time again, so I can get back into my crazy modding moods. My current list of to do stuff is to finish my exhaust, Re-gut my interior (no more friends visiting, so no need to haul extra people around) finally fix my fog lights, install another radiator fan, etc etc. I'll take some pics of the little things I've been doing here soon, too :)
venezbras2013Fort Lauderdale, FL · Jul 30, 2013#177
Sweet ride man! Love the rims!
Can you give us a breakdown of what you have done to the engine bay?
I don't know where to start.... I see you have some headers, cold air intake, front strut bar.... what are the brands and where can I buy all this.
Thanks.
mr_milesThread starterPortland, OR · Jul 30, 2013#178
90% of everything I have has came from microimageonline.com, garm and jeff are fantastic about getting your build going in the right direction. whem I get home ill post an in depth list of what i've done :)
mr_milesThread starterPortland, OR · Aug 1, 2013#179
Alright, I'll see if I can drum up most of my build from memory :D

Engine side, I have.....
micro image intake manifold
1zz throttle body
lightweight pulleys
AFE short ram intake
Megan racing exhaust header
OBX midpipe (yet to install)
Megan racing axle back

I think that's all for anything that would increase / free up power. I also have the full short shift kit, the micro image underpanel, and a Ultra racing front strut tower bar :D
mr_milesThread starterPortland, OR · Aug 2, 2013#180
Cruise control: some people are lazy. Like me. Some people also have aftermarket steering wheels so cruise control doesn't work. Like me. But we all know I don't take "Doesn't work" for an answer. lol.

Plastic steering column shroud? DON'T NEED THAT. I screwed the CC into where the shroud screws in for now. I'll modify the column shroud later so that both it and the cc can be used, there seems to be enough space on the bottom right hand side of it for it to fit. I then zip tied the lower portion to hold it still. <3 zip ties.

Picture not included in this copy

Picture not included in this copy

Onto the wiring! There's two plugs that go into the Clockspring from the column: a yellow plug for the airbag, and a black plug, which has the CC, the horn, and the audio controls. Unfortunately it differs from the second gen (according to the walkthrough I found for DIY cruise control, since none of it was the same for me) so I ended up just cutting the entire black plug because I don't have the audio controls, never will. And I can rewire a horn any day, being that it's one wire. so CHOP it goes..I accidentally ripped the horn wire instead of cutting it.

Picture not included in this copy

so, since i had no idea at first which wire was what, I started just putting wires into the CC. I removed the plug from the end of the CC wiring harness to get the metal plugs to be exposed, as my first plan was to just plug them into the clockspring harness. that idea failed. Oh well. I started with a blue wire that had a single piece of wire inside. seemed to make sense to me. tried all the other ones, then all of a sudden.....HONK HONNNNK. turns out the thickest wire in there is the horn! I made the cruise control power button a horn. I laughed. I'll just move that wire up out of the way for now. (before all this I found a plug with three wires, and tried that, by pushing the metal ends into it. I found the wiper washer harness. CC sprayed my window. lol. It's not pictured)

Picture not included in this copy

So, I kept playing around with the wires. dark bown, and light brown / tan are the correct wires. Dark brown goes to red on CC, tan to Black.

Picture not included in this copy

Yay! CC light came on! time to test! slap the steering wheel back on and off I go! It works. after that all I did was clean up the wiring mess and tuck it up all nice and neat. it's not in the exact spot it would be if it was factory, but it's still reachable by your right hand without removing it from the wheel. turned out to be a mini DIY instead of just pics of what I did :p


Edit: this is why the CC is all I got done. was spraying my old car with my friend. looks much better this color.

Picture not included in this copy
b20vtegmaricopa, az · Aug 28, 2013#182
yikes, sorry to hear. :(
mr_milesThread starterPortland, OR · Aug 29, 2013#183
copy pasta from MI :p

so lets say I put the car on jack stands. I dislike how I was not able to do that, as they're at a friends house.....but that's neither here nor there now :p

Step one: Drain oil. I'll pull the filter off later.

Step two: start removing oil pan bolts. Easy enough, except for one stud (there are two studs with nuts on them, I'm assuming for "make this job easier" when you put a new pan on. that stud had hit the center divider and bent. pulled the whole stud out, replaced with bolt.

Picture not included in this copy

start moving around to the other bolts, easy easy easy....until these two.

Picture not included in this copy

Doesn't look so bad...right? How about this angle.

Picture not included in this copy

Hmm......Cant get a wrench on it. cant get a socket on it. it's steel, so I cant force the socket on to bend it. My best decided course of action is to try and bend the lip of the pan and then get a wrench on the end. about two hours of that and I gave up on that idea - working upside down on the ground slows me down, okay?!

Hammer mode = engaged. if i cant get a wrench on it the only way to do it is to bend the pan back. All I had was a regular nail hammer, way to light. Luckily I was given a gift card to NAPA, so I ran down there and picked up a 2.5 pound sledge, and some gasket maker while I was there in case I couldn't find my tube I already had.

THOR MODE ENGAGED. Even the almighty hammer of THOR is no match for this dreadful oil pan. I ponder what to do momentarily. tried using a drift to no avail as well. Ponder more.

Drill time. went out on a limb and drilled a few holes around the area that was folded over the bolts to weaken it, still wasnt working to well, tried pliers, more drifts and more Thor, but wasn't working. ended up damaging the bolts so I backed off.

Last ditch effort - bend the entire pan around the bolts. slowly I start pulling on the pan after draining the remaining oil. lucky me, it started bending exactly where I had hoped! In case anyone is wondering why I would do that, if you bend metal back and forth enough it'll crack and tear.

few minutes of that and I heard a scary *POP*. one of the bolt holes an the pan ripped! YAY. then it was easy from there. just spun it to get the last one off. Everything up in the engine looks great. the oil pickup tube didn't get touched. Dry it all off, and put some RTV on the new pan. slapped that beauty back on and tomorrow after it's dry i'll fill it up with oil!

Picture not included in this copy


Here's my favorite picture.

Picture not included in this copy

Next step, alignment.
mr_milesThread starterPortland, OR · Nov 7, 2013#184
Oh look, I didn't die. I just took a nap.

Picture not included in this copy

Picture not included in this copy

225 50 15. Somehow, this will fit. Somehow. Couldn't do the valve stems on the inside. no matter where I put them they hit something. Sad day lol. These would have been done a while ago but I was trying to paint them when I painted the Z. But the Z is still just primer haha.

I've also been working on both of my friends S2000's, did a complete bushing install on one, and the other one suddenly got a bad knock from a connecting rod bearing and had copper in the oil pan. so unfortunately both of my projects are on hold. which is upsetting as I'm trying to get the Z's bushings done so I can garage Gnar for winter. lol. Poor Z needs her bushings bad.
b20vtegmaricopa, az · May 24, 2014#185
mr miles, what happened with your car???
mr_milesThread starterPortland, OR · Aug 12, 2014#186
I went on a 4 month long working spree. So much overtime. Haven't really done too much to the car as of late, which makes me sad. Rolling the rotiforms for now. Gotta get back in the game soon!
b20vtegmaricopa, az · Aug 25, 2014#187
Originally Posted by mr_miles ↑
I went on a 4 month long working spree. So much overtime. Haven't really done too much to the car as of late, which makes me sad. Rolling the rotiforms for now. Gotta get back in the game soon!
sweet, glad to know you're still around!
mr_milesThread starterPortland, OR · Aug 26, 2014#188
Yeah.....worked my entire summer away. It's great for the wallet and the car, bad for me lol. Maybe here soon I'll have more time off and I can start working on her again. I did manage a wax the other day, so the car looks happy :p
mr_milesThread starterPortland, OR · Sep 4, 2014#189
figured I'd work on the exhaust a little before work, as I got the OBX setup. turns out the flange on the end of the midpipe is rotated 45 degrees so you HAVE to use the OBX muffler with it. Well I refuse. lol. I like my megan. So I put the stock midpipe back in, and I will go to a exhaust shop and have them rotate that flange, and do any more required work to make it fit right. I want stainless steel all the way, but I want it my way :p I also screwed up my donut gasket on the header (also megan) trying to get it to fit, lol. this is gunna' be a pain.
mr_milesThread starterPortland, OR · Mar 7, 2015#190
So slow season at work never started. It's finally now just "slowing" down....I've been working overtime since well...since I stopped updating this. Yaris work has been....slow. Haven't put the exhaust on yet because the mid pipe doesn't fit. It's not bent right. and OBX wouldn't respond to calls or emails regarding the issue. >:( So I have a useless exhaust sitting in my garage. Going to have to bring it to a shop and have them hack it up to make it fit, but finding a shop that will mess with catalytic converter free exhaust is not easy, because they can lose their jobs, etc. List of things to do:
Put rotiforms back on for summer
get exhaust done
finish re-installing interior
get window tint fixed
have fun and take pictures

So hopefully I'll update more frequently. I miss playing with that car.
mr_milesThread starterPortland, OR · Mar 16, 2015#191
Rotiforms are back on! hopefully the weather stays fair, lol.
yarisugiハワイ · Mar 16, 2015#192
Was looking forward to post #188...
mr_milesThread starterPortland, OR · Mar 17, 2015#193
I was too...I had to sell those a while ago, dental bills slapped me in the face (pun intended) and I needed some quick cash lol.

I also sold the 280z a few months back, I got offered more money than I paid for it so I had a hard time saying no. So I bought my 300zx tt because apparently I have to have a z at all times.
ucsmfuvancouver, BC · Mar 22, 2015#194
Originally Posted by mr_miles ↑
I wish i had a 5 door.

Well, to start off, here's the ugly chrome piece, a little less ugly, and more carbon fibery.

Picture not included in this copy

Rolled the rear fenders today, and removed the collars. Looks much better me thinks. all these pics are right after messing with the front so it needs to settle. :p I'll snap better pics tomorrow of the entire car. I was hungry.

Picture not included in this copy

Picture not included in this copy

Lowered the front a bit more but it needs to settle I think, doesn't seem to have gotten much lower lol.

Picture not included in this copy

Exhaust is less than an inch from the ground now. yey.

Picture not included in this copy

Picture not included in this copy
how did you remove the rear chrome piece ?
mr_milesThread starterPortland, OR · Mar 22, 2015#195
Take off the interior panel on the decklid, and there's 4 or 5 nuts you take off and it pops right out :D
ucsmfuvancouver, BC · Mar 22, 2015#196
Originally Posted by mr_miles ↑
Take off the interior panel on the decklid, and there's 4 or 5 nuts you take off and it pops right out :D
thnx