Yarisworld Archive

My build thread (Gnar Gnar 2.0)

196 posts · 75,025 views · page 3 of 4

Replies continued

mr_milesThread starterPortland, OR · Mar 21, 2013#101
definitely, im ordering smaller poly urethane hanger bushings to fix it :) im almost done with all this ot at work so ill have some free time for once lol, id be glad to help with the fenders. +1 for the megans sound, I like it better than the greddy now lol
b20vtegmaricopa, az · Mar 22, 2013#102
this is about the only thread i look at here, keep it up mr miles! :D
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Mar 22, 2013#103
Originally Posted by 4/20 NEVER FORGET ↑
Very quiet at low RPM but has a nice bark when you put your foot in it.
Good to know. My new neighbors have a final generation Mazda RX-7 convertible with a dual aftermarket exhaust (they also have a Mitsubishi SUV and each drive both). When he or she starts the RX-7 up in the morning in the dark.....OMG, that thing is loud. Makes me wonder how many of my neighbors are awakened by the noise (very few lights on when I peer out an upstairs window). I plan to get an aftermarket exhaust on my next Yaris, and I don't want to do that to my neighbors (I think it is inconsiderate).
mr_milesThread starterPortland, OR · Mar 26, 2013#104
/copy from MI


Ok. So I did some stuff last night. Some fun stuff. Look how clean this is!

Picture not included in this copy

Little fan. it'll probably never turn on since the OEM one doesn't, but oh well. And one of the horns.

Picture not included in this copy

I like the fogs.

Picture not included in this copy

both horns!

Picture not included in this copy

Then, a bath.

Picture not included in this copy

All that's left is to wire the switch and the fogs should function. I think.
Eren_13London, UK · Mar 26, 2013#105
Oh man this looks so amazing! You've inspired me to put eyelids on mine too. Wish I could do this amount of work on mine. You going for HID fogs? :)

Great thread and great work, sir.
mr_milesThread starterPortland, OR · Mar 26, 2013#106
The HID's are already in the fogs lol. the halogens never even made it on the car :p
Eren_13London, UK · Mar 26, 2013#107
Good choice :) that's my next venture. Need to wait for nice weather here to start and for some pigtail connectors since my kit didn't come with them. Daammnn.
mr_milesThread starterPortland, OR · Mar 27, 2013#108
so, a little preview. did a small photoshoot with a friend of mine :D He's going to edit the photo's and send them to me, when he does I'll post more :p I selected a few misc ones, so sorry about quality, etc.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Mar 27, 2013#109
Looks great that low! As a practical matter though, isn't it a PITA to have it that low?
mr_milesThread starterPortland, OR · Mar 27, 2013#110
Yes and no, lol. I'm fortunate enough that where I live is relatively flat, and the roads are pretty well maintained, with typical level-ish entrances. lately, there have been some projects around that are causing dozens of dump trucks loaded with rock to go on my route to work, causing me to occasionally have to maneuver around rocks that are dangerous to me. Today I hit one and drug it for a good 1k feet :/ Driving a low car you care about is a labor of love. there are some places however I just don't go in my car anymore(like anywhere with a speedbump). End up taking the other whip for stuff like that.
4/20 NEVER FORGETPortland, OR · Mar 27, 2013#111
Originally Posted by mr_miles ↑
Picture not included in this copy
Fucking sick as hell. I love it.

Did the UR bar leave good clearance over the top of the battery? It looks like it did.
GolddeenohColumbia, SC · Mar 27, 2013#112
i was just thinking that the lower grille looks like it wants an inter-cooler...
mr_milesThread starterPortland, OR · Mar 27, 2013#113
Someday there will be one there lol.
mazillaSan Jacinto California · Mar 27, 2013#114
Lookin good!
1.5Tampa · Mar 27, 2013#115
Originally Posted by mr_miles ↑
Someday there will be one there lol.
further pushing the envelope on the EC vs WC... snails vs blowers
mr_milesThread starterPortland, OR · Mar 28, 2013#116
its a never ending challenge for you and I lol. one day we should neet in the middle and all hell will break loose :p
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Mar 28, 2013#117
^^^^^ EC vs. WC...lol. You should each pick an original artist from your side to represent you and identify the artist on your car....jk.
mr_milesThread starterPortland, OR · Mar 28, 2013#118
Originally Posted by 4/20 NEVER FORGET ↑
Fucking sick as hell. I love it.

Did the UR bar leave good clearance over the top of the battery? It looks like it did.
yeah, it left quite a bit of room. installing it was a pain though. did it without removing the cowel or my wheels lol

I know a few artists local here who would probably enjoy doing something lile that....hmmm
Dperrybushkill, pa · Mar 28, 2013#119
mr miles great job on the yaris definatly a nice looking ride. reminds me of my long lost 2007 yaris except more JDM looking. now im shredding a 2012 se in white and ur car is a big inspiration. :)
b20vtegmaricopa, az · Mar 29, 2013#120
love the pics bro, sexay!
atxsteve1Houston,TX · Apr 14, 2013#121
So did you get stiffer springs yet?
mr_milesThread starterPortland, OR · Apr 14, 2013#122
Not yet. I've been working so much overtime these past few weeks, I haven't been able to do anything to the car lately. I've got a few things coming in the mail soon, so updates will happen soon lol. I need to order the springs. I should do that tomorrow if I wake up before MI closes up shop!
IllQueensQueens, NYC · Apr 20, 2013#124
Sweet looking...
mr_milesThread starterPortland, OR · Apr 23, 2013#125
so - I work one more night and then I actually have a few days off! I might actually be able to do some stuff. :p
MidonGainesville, TX · Apr 23, 2013#126
"I'm thinking of doing the b-pillars and the side mirror mounts / triangle plastic pieces on the front of the door, but we'll see. Gotta figure out how to get all those pieces off, first..."

Okay, just so you know the 3rd gen has airbags located behinds these trim pieces. It would not be advisable to wrap them in anything. If you do and are in a crash and the airbags go off the trim is designed to split apart. If it did not do this you now have a rather large piece of plastic moving at you upper body and head at a very high rate of speed. If you still want to wrap them and don't mind not having the air bags you can disable them but you might want to have that done at a shop. I am unsure on what would be needed to be done so they don't set them self's off as you take them out.

My opinion mind you but I would not want to see anyone getting hurt.
mr_milesThread starterPortland, OR · Apr 23, 2013#127
hehe, I removed those airbags. the only remaining airbags in the vehicle are the steering wheel and passenger dash airbag :) - But I was referring to the exterior pieces on the outside of the vehicle. The interior pieces are all gone! Don't need no stinkin' interior!
screenprintrNew Jersey · Apr 23, 2013#128
Nice and clean engine.
MidonGainesville, TX · Apr 24, 2013#129
Originally Posted by mr_miles ↑
hehe, I removed those airbags. the only remaining airbags in the vehicle are the steering wheel and passenger dash airbag :) - But I was referring to the exterior pieces on the outside of the vehicle. The interior pieces are all gone! Don't need no stinkin' interior!

Ahh I see. Well in that case mod away. :)
mr_milesThread starterPortland, OR · May 7, 2013#130
Sorry guys. So much work. I counted up the total amount of time I was at work last month, and I spent more time hour wise there, then I did at home! Got some stuff to do soon, though!
ybogo92Carrollton, TX · May 7, 2013#131
What exhaust and springs do you have?

Links? ....please
b20vtegmaricopa, az · May 11, 2013#133
lol... not digging the wood haha.
mr_milesThread starterPortland, OR · May 11, 2013#134
my only complaint is its a tad smaller than I realized. should have gotten the slightly bigger one. its ok, im trying to source a clear pink acrylic wheel to match my shift knob, because musical shift knobs mean musical steering wheels too!
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · May 11, 2013#135
Hard to tell the overall look without seeing it in person, but I have a friend in California who has a black 7 Series BMW with matte finish wheels that are sort of a whitish silver and the interior is solid/mono black leather with a wood steering wheel (similar tone to yours). The overall effect isw great...understated and elegant, but also sharp and striking.
mr_milesThread starterPortland, OR · May 11, 2013#136
I'll snap a few beauty shots of it when I wake up :) was rushed for time so thats all I took lol
4/20 NEVER FORGETPortland, OR · May 12, 2013#137
You get everything sorted out with your intake manifold and 1zz throttle body install?
mr_milesThread starterPortland, OR · May 12, 2013#138
For the most part. My cold start still fluctuates between 2000 to 2300 depending on outside temperature and drops down within 30 seconds, and my hot idle is 600 on the dot, so I'm fairly pleased. I'll probably do a little more fine tuning to see what happens, as I recently got a bluetooth OBD 2 adapter so i can get more accurate readings than the factory tach :)
mr_milesThread starterPortland, OR · May 12, 2013#139
Really not feeling the silver 2.5 quick release. Ordered a black one, but it was ebay, so we all know how that goes. Really didn't want to deal with sending it back and waiting, etc etc. more hassle than it's worth. Either going to trade it for a black one to someone local, or paint it (body paint match, maybe?) But other than that, I'm happy with it. Gotta follow bzinn's thread on how to get the horn and everything to work, and figure out how to get the blinker to go back to it's neutral state, but that shouldn't be too difficult. I'm totally going to find a way to make the OEM cruise control work, too.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
IllQueensQueens, NYC · May 13, 2013#140
Love the wood trimmed steering wheel, makes it look like a timeless classic...I had a wood trimmed stick shit knob for my 86 Honda Prelude...feels much better than the plastic or metal material knobs...
atxsteve1Houston,TX · May 15, 2013#142
LOL nice.....🙇
yarisugiハワイ · May 17, 2013#144
needs tires.
mr_milesThread starterPortland, OR · May 17, 2013#145
But I thought these were for riding on railroad tracks? Crap....I bought the wrong wheels!
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · May 17, 2013#146
When I first saw the 'in the box example' I was skeptical, but seeing them in the wheel wells (even without tires)....I think they will end up being a great choice.
mr_milesThread starterPortland, OR · May 17, 2013#147
I was hoping by some super lucky chance, they would have the black or dark grey versions in stock on the sale, but all they had was unfinished. I'm not a huge fan of silver / chrome / brushed metal look for wheels, so I may get them powder coated before I get tires. Just got to think of a color if I go that route!
HANZO_187Wintergarden, FL · May 17, 2013#148
Originally Posted by mr_miles ↑
Oh man, I cant wait till I can actually run these. I'm in love!

Picture not included in this copy

Picture not included in this copy
What wheels are these? They look great for the car! I'm not a big fan of silver/Chrome but I gotta give these props cause there nice in silver and the style is awesome.
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · May 17, 2013#149
Originally Posted by mr_miles ↑
I was hoping by some super lucky chance, they would have the black or dark grey versions in stock on the sale, but all they had was unfinished. I'm not a huge fan of silver / chrome / brushed metal look for wheels, so I may get them powder coated before I get tires. Just got to think of a color if I go that route!
Powder coating them another color would look good as well. I just wouldn't powder coat them black. Looks better with a color that provides contrast (IMO).
mr_milesThread starterPortland, OR · May 17, 2013#150
Originally Posted by HANZO_187 ↑
What wheels are these? They look great for the car! I'm not a big fan of silver/Chrome but I gotta give these props cause there nice in silver and the style is awesome.

they're rotiform blq's, 18x8 et 30 ;3