Yarisworld Archive

DIY: Painting interior Instrument Panels

123 posts · 506,708 views · page 1 of 3

yrsdrgnOriginal postSF,CA · Feb 27, 2007#1
I'm pretty sure there is a DIY about this but I haven't seen a really detailed one maybe because so many people are use to doing this themselves but for people who are new to it (like myself) this is a bit more detailed.

Start by ripping the interior panels you want to paint. I wanted to get all the silver pieces and the gauge cover so that's all i removed. For the left and right side panels (the ones with the emergency flashers and the passenger lights) I yanked on the bottom first and worked my way to the top. Some force is needed to un-do these but it doesn't hurt the car at all.


Next up I prepped the panels by wiping them down with a paper towel and isopropyl alcohol and then wiping it dry with a dry paper towel.



Then i used 400 grit sand paper and lightly sanded down my pieces. The only piece i showed in this DIY is the air vent panel but do likewise for the other panels you might want to paint.

I once again used a paper towel and alcohol to get rid of any material that had been sanded off. After that I used a tact cloth (usually found at Kragen or Autozone or some place) to wipe my piece down to pick up any excess residue that might have been left over.

Now it's ready to be primed. For my pieces i used Duplicolor Truck and SUV primer but you might want to use something else if you like. Just and even coat say 6-8inches away from the pieces and let is dry for a minute or so then go at it again. I sprayed three layers onto my piece and ended up with this.

I let it sit for about 3-5 minutes or so then i began to spray it with the color that i wanted to turn the panels into. For my pieces i used the Duplicolor Truck and SUV Mariner Blue M paint. Do the same thing as you did with the primer. Spray even layers along the surface of the piece, let dry and layer again. I did about three layers on this piece also and ended up with this.


Last but certainly not least is the clear coat. I used the Duplicolor Truck and SUV clear coat since Kragen didn't have the smaller can for autos. Same process as the last two and by the end of everything i ended up with this. The first photo was taken without flash and the second with flash.


I hope this was helpful to anyone who is thinking about painting their panels for the first time.
DSC08268.JPGDSC08262.JPGDSC08281.JPGDSC08279.JPGDSC08283.JPGDSC08284.JPGDSC08285.JPGDSC08287.JPGDSC08289.JPG

Replies 122

hasher22Australia Sydney · Feb 27, 2007#2
ooo nice tut. thats hot.......came out really hot.

Im planning to paint mine white soon..........when i can be bothered.....
turboyarisSouthern New Jersey · Feb 27, 2007#3
nice work... but you forgot pictures of it all back installed haha looks good
yrsdrgnThread starterSF,CA · Feb 27, 2007#4
I haven't installed it back yet because I painted it all today hehe Gotta let it all dry out👍 But my car looks like someone car jacked it but only stole the panels 😆 Thanks for the nice comments as it was my first time.
hasher22Australia Sydney · Feb 27, 2007#5
yay a painting vergin....well not anymore...

any chances of the interior grey door panels to be painted???
yrsdrgnThread starterSF,CA · Feb 27, 2007#6
Yeah that's my next paint job. Reason why I'm painting my interior blue is to match my soon to be rims that my friend's brother had custom painted subie blue ( WR blue or something rather) on 5Zigen Div3 rims that he's selling to me for $800 (rims only.) I also plan to paint my Netz badge and rear Toyota badge the same color. Later on I will get a Sparco LIthium shift knob and I'm not too sure about e-brake handle yet.
Black YarisToledo, OH · Feb 28, 2007#7
I have a plan to get rid of all that blue poka dot material on my doors and back panels, I am thinking about black suede or vinyl (fake leather), which ever material I go with I will be rapping my pillars and headliner in as well
yrsdrgnThread starterSF,CA · Feb 28, 2007#8
I'm replacing those with either blue or black after i get my bucket seats in maybe a year or so not too sure yet.
eTiMaGoBangkok, Thailand · Feb 28, 2007#9
Originally Posted by Black Yaris ↑
I will be rapping my pillars and headliner in as well
Yo yo yo wassup my pillarizzle? Headliner in da house yo!

😆
Alexandre2k3califirnia · Feb 28, 2007#10
hmm how come the pics don't show up and there are x's where the pics are
ChinoCharlesOH · Feb 28, 2007#11
Originally Posted by eTiMaGo ↑
Yo yo yo wassup my pillarizzle? Headliner in da house yo!

😆
I just slapped my forehead.

Oh, and those pictures don't work.
ChinoCharlesOH · Feb 28, 2007#13
On your original post, click edit.

Then click "Go Advanced."

There will be a paper clip icon on the top near the center. Click it, it will take you to the "manage attatchments" window. Upload all of your pictures, then exit out of it and click that paper clip again. You should see a menu pop up with links to all your pictures.

Hope that makes sense. If not, PM me.
KSIbuckyFond du Lac, WI · Feb 28, 2007#14
How did you keep the silver hew look after painting the silver panels (if that makes sense)
yrsdrgnThread starterSF,CA · Mar 1, 2007#15
here are the final pics of the finished product. I still have to put pics of what it looks like in my car.
DSC08291.JPGDSC08292.JPG
asmodai650Nashville, TN · Mar 13, 2007#16
I hate commiting threadomancy, but how are the panels holding up? Any paint fading? That color is really close to my factory paint color, so this may go down as my first mod to the yaris.
yrsdrgnThread starterSF,CA · Mar 13, 2007#17
The panels are holding up great! No paint fading at all. If you do this mod I hope you're happy with your results. 👍
MrJesterHomo · Mar 13, 2007#18
If you don't mind could we see some updated photos. Thanks
yrsdrgnThread starterSF,CA · Mar 13, 2007#19
Here are two pics of the interior but it's in the garge since I haven't taken the car out all day. haha I'll try to get more pics 2m morning before i go school
DSC08328.JPGDSC08329.JPG
MrJesterHomo · Mar 13, 2007#20
Really looks nice
yrsdrgnThread starterSF,CA · Mar 13, 2007#21
I wouldn't mind purchasing a set if someone could custom up a blue carbon fiber set. haha
Chris07LBNew Jersey · Mar 14, 2007#22
Originally Posted by yrsdrgn ↑
I wouldn't mind purchasing a set if someone could custom up a blue carbon fiber set. haha
I have a connection if you are indeed really interested.
asmodai650Nashville, TN · Mar 14, 2007#23
Thanks for the info and the updated pics.
DragonaccAtl, GA · Mar 14, 2007#24
Looks really nice.
yrsdrgnThread starterSF,CA · Mar 14, 2007#25
Hope others might paint their interior to suit the color of their choice hehe. =P
mikeukrainetzCanada · Mar 16, 2007#26
Ive done this twice now. First time the month after I got the car in '06 second time about a month ago. I did the reverse - painted the trim panels around the dash and the arm rests on the doors and center console.
First time I just prepped and painted. This time I sanded down all the panels to completely remove the 'dimple' and repainted a metallic similar but slightly lighter than my stock blazing blue. Same went for the engine cover.
Anyone looking to smooth out the interior panels be prepared for a lot of f*cking work -
I havent repainted the center console because I intend to replace all the seats and fiberglass from front to hatch.
dvlnblkdrsorange, ca · Apr 18, 2007#27
omg i painted mine today following this diy.. it was great fun and as soon as i get everything reinstalled ill post some pix... fyi i painted everything green.. everything came out pretty good imo, the hardest part was popping out the controls, but nothing too difficult, cant wait to see the finished product
Kaotic LazagnaCentral Valley, CA · Apr 19, 2007#28
Originally Posted by yrsdrgn ↑
I wouldn't mind purchasing a set if someone could custom up a blue carbon fiber set. haha
come up here to Sac. there's that place that i told you about that will do a CF replacement. might give you a discount if i come with you in your car and say that i traded my sedan in for the LB. 😁 but like i said, i was estimated around a G for the interior.
eijikikimaruSo. CaL · Apr 19, 2007#29
It looks like stock so didn't think anyone would care. (please excuse the quality, camera phone quality)

I would have colored the grey turning knob but I was afraid I wouldn't be able to locate it if everything was all black 😛
Yaris_O5.jpgPicture0014.jpg
eTiMaGoBangkok, Thailand · Apr 19, 2007#30
nice first picture, nothing like in-car japanese porn 😁
yrsdrgnThread starterSF,CA · Apr 19, 2007#31
haha yup i agree with Etimago
nick1983Winnipeg Manitoba · Apr 19, 2007#32
I think I will have to do that.
eijikikimaruSo. CaL · Apr 19, 2007#33
Originally Posted by eTiMaGo ↑
nice first picture, nothing like in-car japanese porn 😁
Ahahaha😆
That wasn't porn silly 😛
That was my Music Video playing

Artist: Melody
Title of song: See You

But if porn is what you want, then porn it shall be!
yrsdrgnThread starterSF,CA · Apr 20, 2007#34
i was planning on buying that same kenwood head unit but i got the Pioneer AVIC-D3 instead...still has to be installed after i pay it off haha
eTiMaGoBangkok, Thailand · Apr 20, 2007#35
AVIC D3 is sexy... the screen may be a bit smaller but so what...
dvlnblkdrsorange, ca · Apr 20, 2007#36
ok well the pix are in.. have a look.. i was having some probs getting one of the panels to fit flush, so i may need to hire some muscle for it...lol but have a look...

Picture lost · i5.photobucket.com
Picture lost · i5.photobucket.com
Picture lost · i5.photobucket.com
Picture lost · i5.photobucket.com
eTiMaGoBangkok, Thailand · Apr 20, 2007#37
looks all right, a bit hard to see with all the sunlight glare 😁

As for the flat top panel, it's a pain to put back on, but if you look on its bottom, you'll see there are three tabs that you must slide into corresponding holes on the top of the radio panel. It's a bit tricky!
yrsdrgnThread starterSF,CA · Apr 20, 2007#38
that looks like the same color that i used except with a green tint to it. what color is it?

and thanks Etimago for saying that the AVIC-D3 is sexy. =P
eTiMaGoBangkok, Thailand · Apr 20, 2007#39
if the D3's navigation had support for Thailand, I'd get it in a heartbeat... gotta have that red lighting, and I'm not crazy enough to swap out the LEDs in mine 😁
yrsdrgnThread starterSF,CA · Apr 20, 2007#40
i setting my D3 to blue back lighting and blue button lighting hehe. the wonders of color options on aftermarket headunits.
dvlnblkdrsorange, ca · Apr 20, 2007#41
lol aiight cool thanks.. the color is supposed to be ford jade green, but to me looks more like the color of my old 99 jetta...lol i wish i could get a better pic, these were taken with my cam phone which has no flash on it... ill try to take some with my digi n update with that stuff.. ill play some more with getting everything to sit flush.. thanks
yrsdrgnThread starterSF,CA · Apr 20, 2007#42
ttt it's a nice color. and yes yes please take pictures with digi cam hehe.
dvlnblkdrsorange, ca · May 11, 2007#43
ok... millions of yrs later... digi pix!!!!!!


Picture lost · i5.photobucket.com
Picture lost · i5.photobucket.com

whew! sorry it took so long.. but aint she a beaut!

🤤 😁 👍 🤘
yrsdrgnThread starterSF,CA · May 11, 2007#44
haha i like the last picture where we can see your foot lol. other than that it looks pretty cool
eijikikimaruSo. CaL · May 11, 2007#45
I see you're still having a hard time putting the piece back together or did you even try putting them back together?
DorytheYarisJersey · May 11, 2007#46
Originally Posted by yrsdrgn ↑
here are the final pics of the finished product. I still have to put pics of what it looks like in my car.
Oh my gosh you need to come and do that to my car for me! 🤤

I couldn't even attempt to start ripping apart my dash.
brickhardmeatInner City, Dallas · May 11, 2007#47
Wouldn't your car smell funny on avery hot day? Wouldn't this stuff get sticky in 100+ degree temps? I just don't think it is a good idea to spray paint your interior. Anyway it looks pretty good from what I can see. Would prefer just the center and not the gauge too but it isn't my car. Well I wouldn't spray paint anything in mine.🙂
yrsdrgnThread starterSF,CA · May 11, 2007#48
I'm not too sure about it getting sticky in 100+ degrees as i live in San Francisco (weather changes constantly and hottest rarely gets above 90) and as for smell, i have three air freshners (two in those little "cup" holders and on in the front center right behind the gauge) anything else I don't know about ahha
brickhardmeatInner City, Dallas · May 11, 2007#49
yeah, temp probably not a factor there, it hits 110 here and I can smell my ass hairs burning when I first get in the car, ok that's a lot of air freshening going on
yrsdrgnThread starterSF,CA · May 12, 2007#50
haha yea. and guess what? they're blue air fresheners haha =P