how would i prep the panels before i paint them? what kind of paint? clear coat? sorry for all the questions i just don't want the paint flaking a year from now..
DIY: Painting interior Instrument Panels
123 posts · 506,708 views · page 3 of 3
Replies continued
I am actually working on a nice interior paint Job to mtch the racing seats and harness I'm getting I'll post pic of the peices that I did so far.
Depends on how your gonna paint em. If your just repainting use a 380 grit sandpaper from 3m and just sand it up and down to scuff em up a bit (Usually till the plastic is dull and not shiny anymore). use a layer of plastic adhesion promotor. then primer. paint. clear. buff, wax. BAM! show quality interiors
Depends on how your gonna paint em. If your just repainting use a 380 grit sandpaper from 3m and just sand it up and down to scuff em up a bit (Usually till the plastic is dull and not shiny anymore). use a layer of plastic adhesion promotor. then primer. paint. clear. buff, wax. BAM! show quality interiors
Here's my paint job with some extras. =)



where can i find the STEP by STEP DIY of painting the instrument panel from removing the dash trim...i saw it here before but i can find it anymore...i think it is for sedan...
Yo Nick.d that blue is spot on to the shift boot. +1 for you man
What kind of paint did you use for the black, I like that look.
looks great. I did mine in blue a while back. I'd do the top part but i use that as shelf for my walley and phone too much
That look Damn hot
BUMP
Just wondering if there are some disadvantages on painting the interiors or the "after-effect" once your car is parked under the sun for a long period of time. Have read some topics about the paints giving off poisonous gases? 🤷 Well Im planning on painting my door panel trims just to match my instrument panel trim and I'm worried about this kind of issues. Any thoughts? 🤷
those are mine Picture lost · www.facebook.com
Picture lost · www.facebook.com
I recently went over a lot of my interior pieces with RUstoleum truck bed rubber spray. a day later, all fumes were gone. there's nothing different to painting the inside of the car than anything else. once the solvents in the paint completely evaporate (usually a few days) there is nothing poisonous left.
I removed the silver dash center pieces and had a body shop match my body color which they painted with a gloss finish like on the XD's dash. Looks factory and the gloss is no shinier than the wood trim in many cars. Thanks to the ideas on this thread my dash really looks good. I added painted 3" rings to the outer air vents and to my automatic shifter plate. People on this site come up with the greatest ideas.
Finalkly got around to painting my dash this last weekend to match the badges I painted several weeks ago. Yea! (sorry for the terrible cell phone pic)
Picture lost · img593.imageshack.us
Picture lost · img593.imageshack.us
just did my 09 this past week.. not sure how i feel about it yet







hey guys!!! i thought id share a few pics
Picture lost · sphotos.ak.fbcdn.net
and i did a little in the door.
Picture lost · l27.sphotos.l3.fbcdn.net
Picture lost · sphotos.ak.fbcdn.net
and i did a little in the door.
Picture lost · l27.sphotos.l3.fbcdn.net
The red looks pretty Sick!
Up from the dead...
I'd like to make that silver/grey match the rest of the dash. Has anyone else found a paint and finish that comes close?
Would also like to do the light parts of the door armrests too.
I'd like to make that silver/grey match the rest of the dash. Has anyone else found a paint and finish that comes close?
Would also like to do the light parts of the door armrests too.
this is mine😳


dang it, now i gotta try this. wish my car was something other than gray, then i could do a color that matched that outside. what color blues did you guys use? maybe i can find a good match for the blut dot stitching.
I am actually curious if any of you have had issues after painting them from high temperatures
I painted my panels in the Summer of last year and it gets up to 120 here in Vegas. I have not had any issues with my panels thus far; however, after painting them, make sure they cure for a few days. If you don't, there will be cracking of the paint.