Yarisworld Archive

DIY: Painting interior Instrument Panels

123 posts · 506,708 views · page 2 of 3

Replies continued

dvlnblkdrsorange, ca · May 12, 2007#51
well gracias all for the great feedback.. i fixed the gauge piece, but still cant get the stereo piece to sit right.. iv tried it a million times and it just dont like me so i have given up on it, its really not noticable except sitches like this...lol yea my foot was a nice detail, right? well at least i wasnt driving...lol as for paint smell.. it is actually exterior car paint, so i imagine it would be fine especially with the clear coat n everything on it...
redyarisOrlando, FL · May 12, 2007#52
I painted my trim pieces red last night. Take a look at my thread here

Neoprene Seat Covers and Painted Interior

The duplicolor paint took pretty well (after sanding for an hour and 4 coats with no primer on black trim!). The hardest part was deciding what pieces to paint!

Thanks for the DIY on this...
yrsdrgnThread starterSF,CA · May 12, 2007#53
how'd you get those neopreme (spelling?) seat covers to look so nice?
dvlnblkdrsorange, ca · May 13, 2007#54
hah thats awesome red, i want to do something similar with green, though not so much inside.. lol i want my insides black leather or vinyl with maybe some dior inserts...
yrsdrgnThread starterSF,CA · May 13, 2007#55
how do you get dior inserts or w/e brand inserts done in a car and how much do those things cost? O_o..........all out of curiousity
redyarisOrlando, FL · May 14, 2007#56
For the door panel inserts i am going to remove the fabric to get a pattern drawn up..then i am going to source the neoprene.
kurokoma-kunmy own little world · May 14, 2007#57
Originally Posted by redyaris ↑
For the door panel inserts i am going to remove the fabric to get a pattern drawn up..then i am going to source the neoprene.
Removing the door panel fabric may be harder than you expect--I worked on mine yesterday and did not even really try to take it off; upholstery adhesive is meant to be permanent. I just laid new fabric over--it smooths out very nicely and fits in all the tight spots no problem. I chose fake suede, which is a bit stretchy...neoprene might be even easier to fit.
redyarisOrlando, FL · May 14, 2007#58
Originally Posted by kurokoma-kun ↑
Removing the door panel fabric may be harder than you expect--I worked on mine yesterday and did not even really try to take it off; upholstery adhesive is meant to be permanent. I just laid new fabric over--it smooths out very nicely and fits in all the tight spots no problem. I chose fake suede, which is a bit stretchy...neoprene might be even easier to fit.

So no problem with anything fitting back together with a fabric wrap? Cool. Thats what I really wanted to do instead of removing it altogether.

Does the fabric panel separate from the door panel so you can secure the wrap?
uncleyarisToronto · May 14, 2007#59
Originally Posted by kurokoma-kun ↑
Removing the door panel fabric may be harder than you expect--I worked on mine yesterday and did not even really try to take it off; upholstery adhesive is meant to be permanent. I just laid new fabric over--it smooths out very nicely and fits in all the tight spots no problem. I chose fake suede, which is a bit stretchy...neoprene might be even easier to fit.
MrJesterHomo · May 15, 2007#60
Originally Posted by uncleyaris ↑
AGREED
kurokoma-kunmy own little world · May 15, 2007#61
Originally Posted by redyaris ↑
So no problem with anything fitting back together with a fabric wrap? Cool. Thats what I really wanted to do instead of removing it altogether.

Does the fabric panel separate from the door panel so you can secure the wrap?
No problems with fit on my end, but I was using slightly stretchy thin fabric.

No, the fabric panel does not separate. Once you remove the trim pieces and weatherstrip the edges are exposed except on one end--getting fabric wrapped around this end was kind of a bitch too.

People, am I the first to do this? I did search for threads before attempting and only found ones about how to open up the door panel, not the re-covering part. I only did one side, so if others are interested I will take pics and post when I do the other.
MrJesterHomo · May 15, 2007#62
I would really like to see pics. Havn't seen this done yet so yeah you may be the first. Oh wait I think Violin did it maybe he only did his seats. :) oh well he didn't post pics so post some up.
kurokoma-kunmy own little world · May 15, 2007#63
will do 🙂
MrJesterHomo · May 15, 2007#64
thanks
dvlnblkdrsorange, ca · May 16, 2007#65
im not sure how much the dior inserts will cost.. but there are lots of sites they sell authentic designer fabric for vehicle use.... like $30/yd or so... but i know it will be a while til i can afford it.. i think max will be like 5-7k for the whole car...
nikki555West Des Moines, IA · May 21, 2007#66
Originally Posted by yrsdrgn ↑
Here are two pics of the interior but it's in the garge since I haven't taken the car out all day. haha I'll try to get more pics 2m morning before i go school

I really like you didn't paint the side panels.......I think that it just too much. Yours looks great! :) Like the color. I just did mine purple I love it!
yrsdrgnThread starterSF,CA · May 21, 2007#67
Originally Posted by nikki555 ↑
I really like you didn't paint the side panels.......I think that it just too much. Yours looks great! :) Like the color. I just did mine purple I love it!
post some pictures of yours (unless you already have) hehe. I'd like to see. Thanks for the comment and I'm sure yours looks great also
NigalPiqua, Ohio · Jun 28, 2007#68
This is a great mod! Sadly my interior trim already matches my exterior (silver mica). I was thinking that as I introduce new parts onto the car I'd paint them a third color like yellow or red but I don't think there'd be enough showing to warrant painting the trim to match.
Sway84Toronto Ontario Canada · Jun 28, 2007#69
its not that hard if u have the time lol
DSC00713.JPGDSC00770.JPG
dvlnblkdrsorange, ca · Jun 28, 2007#70
damn!!!! how were the pillars to do? rest of it just too much for me i think.. but i do still want to do the pillars and door handle thingies.. the gry just bugs.... did u just pull off and jam back in like most the rest of it, or more difficult??? or maybe u just wanna come to cali & do it for me? lol =oD
Sway84Toronto Ontario Canada · Jun 29, 2007#71
lol its pretty simple actualy... theres a manual here of how to remove everything and i had a whole day so me and my friend jumped on the opportunity and did it lol... shit man i wish i lived in Cali...beautiful weather beautiful girls... the only thing is with the whole dash head piece you gotta be careful with the airbag on the passenger side.. and the fans on the side... other than that it wasnt complicated for me... although i have been told by some that there are pillar airbags...i didnt see any on mine...
whooppee777Maryland · Jun 30, 2007#72
mine didnt come out so well. i wanted a shiny black look and it just didnt happen. i did about 3 coats of primer, 3 coats of gloss black paint, and 3 coats of clear coat. i think i think if i had done fewer coats of something it would have come out fine. now i think i am just going to take it to a body shop or something and pay to have it done.

painting my trim in my garage at night with no ventilation probably didnt help, or the vast summer humidity. my dad told me to do it outside during the day but then dust, dirt, bugs or whatever can screw up the end result.

how much does it typically cost to have about 7 small pieces of interior plastic painted at a shop?

i want anything thats silver painted black. thats the radio, cliamet control trim, shifter trim, door handle trim.
whooppee777Maryland · Jul 1, 2007#73
nevermind, just sanded everything down and started over. did it outside in the daytime this time, didnt turn out half bad for a first time paint job in my opinion. i'll post pix soon.
dvlnblkdrsorange, ca · Jul 9, 2007#74
well im up n paintin again...lol still too scared to do the pillars tho.. anyone wanna come over n do em for me? lol.. im doin the door pieces and those hazard light/airbag light holder thingys.. those r gonna be black n the door pieces the same green as the console... yay!
JerkrattFair Lawn, NJ · Jul 10, 2007#75




lol heres a bonus
eijikikimaruSo. CaL · Jul 11, 2007#76
Hey! Why does that set up look so familiar??? Hrm...🙂

BTW, are all the speckle white dots glitter sparkle or dust?
JerkrattFair Lawn, NJ · Jul 11, 2007#77
heh dust have not had the time to wash it again yet... been very busy.. my son was in the hospital since july 3rd just got out yesterday. so things are still a little edgy
dvlnblkdrsorange, ca · Jul 11, 2007#78
looks real nice! u gonna paint nething else??? i think im addicted :)
JerkrattFair Lawn, NJ · Jul 12, 2007#79
yeah im planning on doing the silver/gray w/e color it is plastic in the back also.. and maybe the pillars not sure
BelleOfPistolaQueens, NY · Jul 12, 2007#80
have anybody ever paint the speedometer? the panel can come off rite?
dvlnblkdrsorange, ca · Jul 12, 2007#81
the panel that covers the spedometer? i did if u look at my post.. its only the basic rim on the top and the lil valley of it thats all of the piece and yes that, like the whole car.. snaps out.. just pull
fnkngrvIn The Hotbox · Jul 13, 2007#82
Originally Posted by whooppee777 ↑

how much does it typically cost to have about 7 small pieces of interior plastic painted at a shop?

I went to the local Toyota Dealership (120 mile round trip) and they quoted me at 300-350 to paint the parts the same Jade Sea Metallic as my exterior paint...but that is the dealer....they also warrantied their work for 5 years. I have not come up with the coin yet for it however.
DuckywitbigfeetzHouston, TX · Jul 19, 2007#83
im planning black leather with white stiching on all that you have painted this DIY was very useful for the parts i decided to paint
redyarisOrlando, FL · Jul 21, 2007#84
Originally Posted by BelleOfPistola ↑
have anybody ever paint the speedometer? the panel can come off rite?
Kind of hard to see how fast youre going then LOL.

Check my garage. Many here have done this.
ism3tSouthern California · Jul 31, 2007#85
so if someone were to try this, and ruin the paint, ie. too much paint on EVERYTYHING, what would that someone have to do to remove the paint and try again? time MAY be a factor on this one....
dvlnblkdrsorange, ca · Jul 31, 2007#86
umm sand the bejeesus out of it? durrr ;)
umm_baconWichita · Sep 18, 2007#87
How well does the paint job hold up now that it has been some time since many of you brave souls tried this?
dvlnblkdrsorange, ca · Sep 18, 2007#88
iv had mine done for almost a yr.... only one chip but, its on the handle, and very tiny.
Pitt YarisPittsburgh · Feb 11, 2009#89
OOOOLD thread, but did anyone do theirs with flint mica?
Pitt YarisPittsburgh · Apr 4, 2009#90
I took all the plastics apart and I'm painting the upper plastic, but I can't figure out how to get the a/c, etc. knobs apart from the plastic. Help would be appreciated.
Pitt YarisPittsburgh · Apr 4, 2009#91
I painted the upper radio panel, but waiting to get help with taking apart the lower controls so I can paint the lower panel (as well as the knobs). Another question I have other than that help is, what color border do you think I should do (plastics around the middle). Car is flint mica, and the radio/control plastics are black. Was gonna do flint mica around it, but I almost feel like a different color than the exterior but something tht will look good coinciding with exterior flint mica.
LambpastyMassachusetts · Apr 5, 2009#92
Originally Posted by Pitt Yaris ↑
I painted the upper radio panel, but waiting to get help with taking apart the lower controls so I can paint the lower panel (as well as the knobs). Another question I have other than that help is, what color border do you think I should do (plastics around the middle). Car is flint mica, and the radio/control plastics are black. Was gonna do flint mica around it, but I almost feel like a different color than the exterior but something tht will look good coinciding with exterior flint mica.
If you look on the back of the panel that holds the knobs there are small tabs on the side of the knob harnesses that you need to pop out. Be careful though they snap easily (yes speaking from experience 😳 ). Theres also a small clip next to the fan speed knob that holds the wiring to the faceplate, that one I had to pry off with a flathead screwdriver.

As for the color you could go with a gunmetal blue or something simiar, that might look cool with the mica color IMO.
Pitt YarisPittsburgh · Apr 5, 2009#93
Thanks, that's what I thought. I tried taking the harness' out and they are in there pretty good. Then speaking of those clips that are on the sides of the plastic, I tried takin those off too and they're on there pretty darn good.
I got satin black hoping to match a little bit of the dash but it's so so much darker than the rest of the dash :(. Will post pics if I can get the bottom plastic out.
LambpastyMassachusetts · Apr 5, 2009#94
I just finished paining mine about an hour ago, letting it dry for a couple more hours before putting it back in:



It's actually a little darker than it looks in the picture, came out pretty good though I think for a first-time mod 😁
Pitt YarisPittsburgh · Apr 5, 2009#95
Pretty much done......not sure if I like the black, lol. I might end up using paint thinner and going back to the silver :/
LambpastyMassachusetts · Apr 5, 2009#96
Originally Posted by Pitt Yaris ↑
Pretty much done......not sure if I like the black, lol. I might end up using paint thinner and going back to the silver :/
I almost went with black for mine instead of blue, but changed my mind at the last second thinking that it really wasn't much of a change to the gray/charcoal/black color scheme already in the car anyways.


Just reinstalled my trim:



Definitely makes the dash pop now. I think I might take the white vent pieces out and paint them black along with the side trim pieces (hazard lights and passenger lights). Should look really cool once I get all my LEDs installed where I want them. Thanks for this DIY, that was fun and way easier than I'd expected 👍
Pitt YarisPittsburgh · Apr 5, 2009#97
I used satin black thinking it would be a little duller, but it makes the rest of the dash look gray/that much duller. I like the black, but I don't like the way it makes the rest of the dash look. I'm definitely keeping my knobs black if I do end up changing the color of the panels though. It's gonna take a while for them to try so I'll post pics and get suggestions after.
Pitt YarisPittsburgh · Apr 5, 2009#98
This is ultimately what I was/am going for.
Picture lost · www.valuepcpr.com
Pitt YarisPittsburgh · Apr 5, 2009#99
It was getting dark outside by the time I got it all put back together, but here it is. I will post another when I get a pic of it during the day. Any more suggestions for the border? That red looks good on the gt, but I want something that won't look odd with exterior flint mica.
Picture lost · img22.imageshack.us
Daytime shots....
Picture lost · img6.imageshack.us
Picture lost · img19.imageshack.us