Yarisworld Archive

STF posts

647 posts · 143,819 views · page 11 of 13

Replies continued

xnamerxxso cal · Apr 5, 2014#501
Alvin owns the car and Travis is his codrive.

Alvins not much of a forum guy, so I don't think he'll pop up here.

Car is pretty simply, hes running a 21mm rear bar, and fortune coilovers, and a muffler delete. He's also running Federal 595 RSR tires.
xnamerxxso cal · Apr 6, 2014#502
Congrats to Travis and Alvin for the 1-2 finish in STF :)
ilikericeThread startersavannah, ga · Apr 6, 2014#503
NICE
andres3165Minneapolis · Apr 7, 2014#504
Originally Posted by xnamerxx ↑
Alvin owns the car and Travis is his codrive.

Alvins not much of a forum guy, so I don't think he'll pop up here.

Car is pretty simply, hes running a 21mm rear bar, and fortune coilovers, and a muffler delete. He's also running Federal 595 RSR tires.
Hear people driving those Federals more and more.. why?

https://www.youtube.com/watch?v=LPQA...IYMP8Kz84e1XHg

https://www.youtube.com/watch?v=0AA2...IYMP8Kz84e1XHg

Good driving

Andres
ilikericeThread startersavannah, ga · Apr 7, 2014#505
I don't know andres... The r-comp pixie lady must have sprinkled her dust on these instead of the R1R tires on accedent. I am tempted to get these as well. $65 a tire is pretty damn cheap to test.
xnamerxxso cal · Apr 7, 2014#506
No one in STF at SD was running the older tires.

The 2 was on Dunlops
The Yaris on Federals
The Mini on Rivals

For that site Federals at least on paper look like the best choice. If I had to pick a tire though, I would say new Toyos would probably be best.
justjesusOrange County · Apr 7, 2014#507
Originally Posted by xnamerxx ↑
Congrats to Travis and Alvin for the 1-2 finish in STF :)

Congrats indeed.

I was a bit surprised to see Don Green in STF. Co drive with J. Austen, it appears. Don is a pretty decent driver who's had very good results in Stock with the Mini (not sure if it was Austen's or not) over the years.

But cool deal with Travis / Alvin representing the Yaris in STF!

I'm tempted to visit the Pro Solo coming up!!
justjesusOrange County · Apr 7, 2014#508
Originally Posted by andres3165 ↑
Hear people driving those Federals more and more.. why?
Like I like Rice said, they're cheap. I have them on my CRX, and have done some autoX as well as a couple of track days. I like them just fine. For the price, I LOVE them.

Somebody at my skill level (bottom of the STC class) might be better off saving money with these, while improving my skill, before stepping up to the more expensive tires.

The other side of that coin, is to get what I know works, and I already have a benchmark (the other STC guys in my class) and can continue to improve my driving. With the R1Rs, on my Civic, I know my car has alot more than I can give it (my co-drive took 3rd in a Pro-Solo).
xnamerxxso cal · Apr 12, 2014#509
Day 1 of the ProSolo is starting very excited to be teaching against some fierce competition.

Bad news though the tckline mini sounds like it has a rod knock I really hope I'm wrong about that.
ilikericeThread startersavannah, ga · Apr 13, 2014#510
Good job. That blue mini is joe Austin's.

You guys got 8 runs total... lucky
xnamerxxso cal · Apr 13, 2014#511
The mini belongs to someone named Christopher Miller. The noise was a bad idler pulley.
xnamerxxso cal · Apr 13, 2014#512
Getting ready for my last runs, hope I don't embarrass myself.
xnamerxxso cal · Apr 13, 2014#513
Well finished 6th out of 8 with a 1.5s spread between 1 and 7. If I didnt have a two .95s reaction times I would be going to the challenge. With the reaction time taken into account I had the fastest left side time.
xnamerxxso cal · Apr 13, 2014#514
Picture not included in this copy
ilikericeThread startersavannah, ga · Apr 13, 2014#515
Awesome, congrats man. Scott got you by fractions. Scott was close on my tail the first day also..
andres3165Minneapolis · Jun 8, 2014#517
Originally Posted by xnamerxx ↑
Ideally the best car is Yaris sedan.

Its several inches shorter in height so the CG is lower and the frontal area is lower, its 2 inches longer and it weights a few lbs less. You also have the smaller front swaybar so inside spin isn't as much of a problem.
Based on recent results I still think there is a lot to get from the Yaris which in STF prep version my get better power/weight ratio than my Mazda2, enough to compete with the powerful newcomers like the 2.3 Focus and pf course Mazda 3

Do you have documented data on those numbers, like weight and stuff between sedan and hatch ?

Thanks

Andres
xnamerxxso cal · Jun 14, 2014#518
Most of the numbers are available online like weight and wheelbase and height etc but I don't have any exact numbers.

Personally I would go with a Scion XD if you could get the weight down to the 2400lb range which I don't know if thats possible. Motor is good for well over 140hp on a Mustang Dyno, and it uses the same chassis as the Yaris with the lower roofline of the sedan, plus is has awesome gearing.
andres3165Minneapolis · Jun 16, 2014#519
Thanks, found them, who has the most powerfull STF legal Yaris? How did he achieved it?
Headers, cai , pulleys, tuning?, header back?
I haven't seen dynos higher than 112 hp or so..

Thanks

Andres
ilikericeThread startersavannah, ga · Jun 17, 2014#520
will need to pick at Travis Sackwar and Alvin Francisco brain and find out whats under that hood of the yaris. I don't know anything about those guys. First I heard about them, but yet, this is my first year actually paying attention to ST national events
xnamerxxso cal · Jun 17, 2014#521
Their motor is stock with 120k on it last time I saw.
ilikericeThread startersavannah, ga · Jun 17, 2014#522
Well then its straight up all driver then.

I know joe austin has everything that can possibly be done to his mini to make it STF legal, including a reflash on his ecu, which if i can recall correctly, it was somewhere in the 140-150 hp range when I talked to him, which was back in March.

So for Travis Sackwar to come only .100 from Joe at the June 13th national event is saying something. Joe can drive, he just has a hard time getting clean runs.

http://sololive.scca.com/STF.html
xnamerxxso cal · Jun 17, 2014#523
Power means almost nothing for most STF cars. Last I spoke with Alvin, he was doing some more suspension tuning on the car and upped the spring rate but I'm not sure how that panned out since I haven't been to an event in a few months.


There is no question Travis is a better driver than Joe, he runs a car on street tires that isn't competitive and he cleans up in DSP.

Here is a vid of Sundays course.

https://www.youtube.com/watch?v=6TEl...ature=youtu.be
andres3165Minneapolis · Jun 17, 2014#524
Definitely a great driver, car seems really strong but a little pushy, sounds amazing and great skills down shifting. Is there a way to change the Rev limiter, that would change the car big time.

How can I contact those guys?

Thanks

Andres
justjesusOrange County · Jun 17, 2014#525
Originally Posted by xnamerxx ↑
Their motor is stock with 120k on it last time I saw.
Yup indeed. I couldn't believe it, so I asked to look under the hood. Stock down to the stock air box! He might have had an exhaust muffler, but can't recall for sure.

As Namer pointed out, last I checked with him, he was looking at stiffing up the springs.

Yes - he and his co driver are both good drivers. When I ran against them, they killed me by like 4 seconds. I doubt that's attributed to car set up!
xnamerxxso cal · Jun 17, 2014#526
Video is from Tyler Colgetts STF Fit.

As far as the rev limiter, your best bet is probably to change the crystals in the ECU otherwise you'll need an aftermarket ECU or something like that.

Couldn't tell you how to get in touch with them, I only talk to them at events.

Found one of Alvins Videos from Crows Landing

https://www.youtube.com/watch?v=Fxkt...IYMP8Kz84e1XHg
ilikericeThread startersavannah, ga · Jun 30, 2014#527
quick question. Got a friend who is going on a track day and has a turbo. Been searching, but can't find anything about disabling the speed limiter.

Anyone got any suggestions about this or solutions?
xnamerxxso cal · Jun 30, 2014#528
Pull the speedo plug. Its what I have to do to get around it on the BS car, just make sure you don't pull the battery otherwise the ecu won't go into learning mode.
BondXIIKingsland, GA · Jun 30, 2014#529
So you go on track not knowing how fast...other than GPS? Just wondering. I don't pay much attention to the speedo anyway. Too busy paying attention to the other racers. Lol


Sent from my iPhone using Tapatalk
xnamerxxso cal · Jun 30, 2014#530
Basically. The speedo is way off and I can't see the gauge cluster because of the knee bar, so the only gauge I pay attention to is the tach.
BondXIIKingsland, GA · Jun 30, 2014#531
I'll try that. Would hate to have to point people by just because the old Bumble Rumble fell on its face. With your setup...how fast is too fast?


Sent from my iPad using Tapatalk
xnamerxxso cal · Jul 6, 2014#532
Usually its right around 105 on the GPS. Not sure of the track you're gonna be on so it may be an issue it might not. At the slower tracks like Big Willow or Streets of Willow its not really an issue, at faster tracks like Buttonwillow or AAA Speedway its a bit more of a problem.
xnamerxxso cal · Jul 7, 2014#533
For an actual STF update, ran the AutoX car again in what feels like a really long time. Car worked exactly like it was supposed too, except I think I was overheat my RS3, not all that sure, don't really have any AutoX experience with them.

Anyway heres a video of my fast run. 4th\22 in 2nd runs.

https://www.youtube.com/watch?v=qE1Q8kAq4TM#t=27
xnamerxxso cal · Jul 20, 2014#534
Well another weekend another race, got 3rd place about a second behind Travis and a little under half a second behind Alvin. Nothing really to complain about, aside from the sharp right at the start made it hard to put power down, but other than that the car was tight and felt fantastic.

Had Jason@sportscar hope in and give my GF a quick instruction run. Thought it would be cool to do a side by side shot from his run to my fast run.

My run was a 58.7 and Jasons run was a 59.6. I'm sure he would have put quite a bit of time on me if he was more familiar with the car.

https://www.youtube.com/watch?v=_WN5...ature=youtu.be
andres3165Minneapolis · Sep 9, 2014#535
Originally Posted by ilikerice ↑
Well then its straight up all driver then.

I know joe austin has everything that can possibly be done to his mini to make it STF legal, including a reflash on his ecu, which if i can recall correctly, it was somewhere in the 140-150 hp range when I talked to him, which was back in March.

So for Travis Sackwar to come only .100 from Joe at the June 13th national event is saying something. Joe can drive, he just has a hard time getting clean runs.

http://sololive.scca.com/STF.html
Finally had the chance to meet Travis and his co-driver at Nationals last week; nice guys, great drivers. Just need to prep the car a little bit more to win for sure.


Andres
ilikericeThread startersavannah, ga · Mar 4, 2015#536
Well. Dixie Nationals is coming up in less than 2 weeks. I feel like I have become a much better driver in the past year. After going to many conventions and be able to participate in the Evolution Driver school a month ago, I feel my driver mod has increased.

Nothing has really changed much except tires. I got a chance to talk to Andy Holis at the MSX Expo/SCCA conference a few weeks ago. During a Tire panel with BFgoodrich and Hoosier Reps as the speakers. I was asking questions the pros/cons between going with a 225 and a 205 tire on either a 7" rim or 7.5" rim. They wanted to talk to me after the panel but they got swamped with other people, so I started out the door. Then Andy stopped me and we started talking.
Basically he said you loose tire stiffness when you pinch a tire on the rim with street tires. You want lateral side wall but a slight stretch is recommended. He suggest to go with a 205 on my 7.5" rim. So I did.
Purchased 4 205/50/15 BFGoodrich Rivals. I have yet to really try them out in the dry. Our last event was all wet so was hard to dial in. But I was able to get 1st in Pax again, and I feel I wasn't giving it 100%. So thats good.

So far only 4 STF drivers.. I have signed up for contengencies for BFG and Hawk, but need 5 starters in order to get awards. Hopefully 1 more will sign up..

Where you at Andres?
Russelt3hPirateEpcot · Mar 4, 2015#537
Originally Posted by ilikerice ↑
Well. Dixie Nationals is coming up in less than 2 weeks. I feel like I have become a much better driver in the past year. After going to many conventions and be able to participate in the Evolution Driver school a month ago, I feel my driver mod has increased.

Nothing has really changed much except tires. I got a chance to talk to Andy Holis at the MSX Expo/SCCA conference a few weeks ago. During a Tire panel with BFgoodrich and Hoosier Reps as the speakers. I was asking questions the pros/cons between going with a 225 and a 205 tire on either a 7" rim or 7.5" rim. They wanted to talk to me after the panel but they got swamped with other people, so I started out the door. Then Andy stopped me and we started talking.
Basically he said you loose tire stiffness when you pinch a tire on the rim with street tires. You want lateral side wall but a slight stretch is recommended. He suggest to go with a 205 on my 7.5" rim. So I did.
Purchased 4 205/50/15 BFGoodrich Rivals. I have yet to really try them out in the dry. Our last event was all wet so was hard to dial in. But I was able to get 1st in Pax again, and I feel I wasn't giving it 100%. So thats good.

So far only 4 STF drivers.. I have signed up for contengencies for BFG and Hawk, but need 5 starters in order to get awards. Hopefully 1 more will sign up..

Where you at Andres?
Good luck at Dixie, I think i've raced with you at a roebling rd event a year or so back. Drove up from Orlando in my STi.

What Andy said matches what i've felt when driving cars with pinched tires, plus with the yaris being a momentum car the lighter 205s will help as well.

Keep us posted how you do at Dixie.
ilikericeThread startersavannah, ga · Mar 4, 2015#538
Will do. I now have a gopro so there will be video.

I am now the solo chair for Coastal Empire Buccaneer region. So next time you come up, ill be the one running around making sure its going smoothly.
Russelt3hPirateEpcot · Mar 4, 2015#539
I recently moved to the frozen north (Iowa). My good friend still runs with you guys though. He has our old Yaris actually, but AutoXs a 2013 White STI.

Congrats on the solo chair position!!
ilikericeThread startersavannah, ga · Mar 4, 2015#540
Ehh.. I wouldn't say congrats.. I love the sport and want to see it continue, the previous solo chair was getting burned out. I went ahead and stepped in to keep it going. I would love to just show up, do my worker assignment, drive, help clean up and leave. Only chance I get to do that is going to another regions event.. HAHA.
andres3165Minneapolis · Mar 6, 2015#541
Good luck Derrick. Rivals will do well in the cold, just practice on friday with 25-27 psi's . Wont be there since move to Mn. and my car is not ready yet.

Andres
ilikericeThread startersavannah, ga · Mar 9, 2015#542
Well, that sucks Andres. Thanks for the Pro tips!

Last day for registration for Dixie. Looks like we have 6 drivers in STF. Hoping to get Hawk or BFgoodrich contingency win...
andres3165Minneapolis · Mar 15, 2015#544
Good Job!!!!!!!! Wow !!!!! Congrats.

What else did you do to your car from last's year event ?

Andres
BondXIIKingsland, GA · Mar 15, 2015#545
Congrats D. I was watching you...well listening, since the streaming only had audio this weekend. Quite a battle in all classes this year. I still need to hard wire my FIC and the X-Runner isn't as competitive as it use to be in STX. Maybe next year.


Sent from my iPad using Tapatalk
ilikericeThread startersavannah, ga · Mar 16, 2015#546
@Andres
The difference was last year I had the OEM mid pipe, this year I upgraded to the Nitto midpipe, cut off one of the resenators and welded a cat in OEM location.
Also, last year i was running 225 hankooks on a 7" rim, this year I went with 205 Rivals on a 7.5" rim..

But I think the biggest difference was the driver mod... I have improved a lot in 2014 and really understanding the mental prep work that is required to find the best lines and memorizing the course. After each walk through, I would close my eyes and run the course in my head. If there was a spot in my memory that I was unsure of, I would walk the course again. I would repeat this until I can drive the course in my head every time.

Also, the GoPro helped a lot. Being able to view my runs after ward and seeing where I needed to get close to a cone, brake later, or get on the throttle more was what I needed.

@Bond
Thanks for listening. I haven't had a rush like that in a long time. My hands were still shaking in grid afterwards. My last run, I gave it everything I had and after viewing it on my gopro, I think there was still maybe .100 in a spot or 2. I was nailing every turn.

I will post up a decent video later on for all to see.
andres3165Minneapolis · Mar 16, 2015#547
Originally Posted by ilikerice ↑
@Andres
The difference was last year I had the OEM mid pipe, this year I upgraded to the Nitto midpipe, cut off one of the resenators and welded a cat in OEM location.
Also, last year i was running 225 hankooks on a 7" rim, this year I went with 205 Rivals on a 7.5" rim..

But I think the biggest difference was the driver mod... I have improved a lot in 2014 and really understanding the mental prep work that is required to find the best lines and memorizing the course. After each walk through, I would close my eyes and run the course in my head. If there was a spot in my memory that I was unsure of, I would walk the course again. I would repeat this until I can drive the course in my head every time.

Also, the GoPro helped a lot. Being able to view my runs after ward and seeing where I needed to get close to a cone, brake later, or get on the throttle more was what I needed.

@Bond
Thanks for listening. I haven't had a rush like that in a long time. My hands were still shaking in grid afterwards. My last run, I gave it everything I had and after viewing it on my gopro, I think there was still maybe .100 in a spot or 2. I was nailing every turn.

I will post up a decent video later on for all to see.
Awesome !! see you back when????
You have a title to defend

Andres
andres3165Minneapolis · Mar 16, 2015#548
At your next National event look for this car .....

Picture not included in this copy

Andres
Blown_xaVirginia · Mar 16, 2015#549
Congrats again dude!
Eduardo_mtyMar 16, 2015#550
Originally Posted by andres3165 ↑
At your next National event look for this car .....

Picture not included in this copy

Andres
Do you take your idea from Mazda cx5Picture not included in this copy

Take a look my car

Picture not included in this copyPicture not included in this copy

3 attachments not included in this copy