randydidOriginal postAlbuquerque, NM · Dec 1, 2011#1Hello,
Less than 12 hours after purchase of my 5 door SE, I am already to start modding! After some Google-ing, I see that Eibach is looking for owners in the CA area for prototyping springs. Wish I lived there, will someone PLEASE get their '12 over there to them??! 😁
CAI-I have added them to cars in the past-a great bolt on mod for a few extra HP's. I had issues with the one I had on my 2007 Matrix and had to install a Greddy Blue for MAF tweaking. It was a headache and I will be looking for a better solution for the Yaris-hopefully one that does not throw the air-fuel mix way out of spec.
I imagine that a header for a 2007-2011 might just fit. Anyone brave enough to try? I might take a shot at it with a DC Sports THC4407. Any thoughts on this?
I know that the one painful thing about early adopting is waiting for these parts to be manufactured. 😁
Looking forward to thoughts and ideas.
/randy
Replies 88
Jason@SportsCarDebary, FL · Dec 1, 2011#2 Originally Posted by
randydid ↑ Hello,
Less than 12 hours after purchase of my 5 door SE, I am already to start modding! After some Google-ing, I see that Eibach is looking for owners in the CA area for prototyping springs. Wish I lived there, will someone PLEASE get their '12 over there to them??! 😁
CAI-I have added them to cars in the past-a great bolt on mod for a few extra HP's. I had issues with the one I had on my 2007 Matrix and had to install a Greddy Blue for MAF tweaking. It was a headache and I will be looking for a better solution for the Yaris-hopefully one that does not throw the air-fuel mix way out of spec.
I imagine that a header for a 2007-2011 might just fit. Anyone brave enough to try? I might take a shot at it with a DC Sports THC4407. Any thoughts on this?
I know that the one painful thing about early adopting is waiting for these parts to be manufactured. 😁
Looking forward to thoughts and ideas.
/randy
No need, the old stuff fits. Other than the sheet metal the only difference we have found so far is the ECU. 😎
randydidThread starterAlbuquerque, NM · Dec 1, 2011#3 Originally Posted by
Jason@SportsCar ↑ No need, the old stuff fits. Other than the sheet metal the only difference we have found so far is the ECU. 😎
SWEET! I love interchangeable parts! 🤘
I still wonder about routing with a CAI... or is a SRI a better bet?
Thanks!
/randy
Jason@SportsCarDebary, FL · Dec 1, 2011#4 Originally Posted by
randydid ↑ SWEET! I love interchangeable parts! 🤘
I still wonder about routing with a CAI... or is a SRI a better bet?
Thanks!
/randy
We have the standard K&N setup on our 2012. Now, I did not use the heat shield - we never have because we typically go for a smaller battery and relocated it, and the heat shield is less effective with the battery gone - so I can't say if it would need to be trimmed to fit under the hood, but the rest of the system works perfect.
CTScottUSA, CT · Dec 1, 2011#5I test drove a 2012 and spent some time poking around under the hood. Based on what I saw, I believe that 06-11 engine related mods (Blitz supercharger, intakes, exhaust manifolds, etc.) will work without issue. I also have the EWDs and have found that many electrical system mods (like adding cruise control) are the same as for the 06-11.
mr9865Green Bay WI · Dec 1, 2011#6 Originally Posted by
CTScott ↑ I test drove a 2012 and spent some time poking around under the hood. Based on what I saw, I believe that 06-11 engine related mods (Blitz supercharger, intakes, exhaust manifolds, etc.) will work without issue. I also have the EWDs and have found that many electrical system mods (like adding cruise control) are the same as for the 06-11.
So you think we can do the $40 cruise control mod on the 12's
CTScottUSA, CT · Dec 2, 2011#7 Originally Posted by
mr9865 ↑ So you think we can do the $40 cruise control mod on the 12's
Yes.
DJYojimboChicago · Dec 2, 2011#8Is your car manual?
Scubaru Stevecalgary · Dec 2, 2011#9im still waiting for delivery of mine, but i have already purchased a afe intake from micro.
and planning on the dc sports header. i was assured at toyota that intakes and exhausts from the 11 hatch fit the 12 hatch.
Strider199Ontario, Canada · Dec 3, 2011#10Reading here that only the body has changed on the 2012 yaris, is it OK to assume that an older model trailer hitch would fit the new model?
I too am still awaiting my 2012 3 door manual black Yaris. This Wed. is scheduled as delivery day.
Scubaru Stevecalgary · Dec 3, 2011#11mine is between the 19th and 23rd.
randydidThread starterAlbuquerque, NM · Dec 3, 2011#12 Originally Posted by
Strider199 ↑ Reading here that only the body has changed on the 2012 yaris, is it OK to assume that an older model trailer hitch would fit the new model?
U-Haul seems to have one already which seems ambitious, it may fit-I too am interested in a receiver hitch for my 5 door.
/randy
FortmaxSo. Cal · Dec 4, 2011#13Will the center armrest on 2011 Yaris fits on 2012 Yaris ?
enviriCT · Dec 4, 2011#14i wonder how much of a headache it is to adapt the blitz supercharger's maps to the '12 ecu?
Scubaru Stevecalgary · Dec 4, 2011#15 Originally Posted by
enviri ↑ i wonder how much of a headache it is to adapt the blitz supercharger's maps to the '12 ecu?
its something that i think i may try in the spring.
03Z33SoCal · Dec 5, 2011#16 Originally Posted by
Fortmax ↑ Will the center armrest on 2011 Yaris fits on 2012 Yaris ?
Unfortunately does not look like it will work.
Originally Posted by
enviri ↑ i wonder how much of a headache it is to adapt the blitz supercharger's maps to the '12 ecu?
Originally Posted by
Scubaru Steve ↑ its something that i think i may try in the spring.
Blitz and Power Enterprise both already have piggy-back setups for the 2012 cars in Japan. PE show the 2012+ SC kit as shipping and the Blitz one shows as to be released soon.
mircrothunderwashington state · Dec 5, 2011#17do you know if the vitz badges will fit the 2012 ?
Scubaru Stevecalgary · Dec 8, 2011#1803Z33SoCal · Dec 9, 2011#19Strider199Ontario, Canada · Dec 9, 2011#20Thanks for the tip on the trailer hitch randydid (I'm still waiting for mine to come in, Grrr).
That Supercharger kit looks awesome. A little pricey mind you.
randydidThread starterAlbuquerque, NM · Dec 31, 2011#21So, I am about to buy some Tein S Tech Springs for my SE. From what people have said, a set made for 06-11 will work, right....right?
Jason@SportsCarDebary, FL · Jan 2, 2012#22Not a great shot, but here is the DC header on a 2012. Perfect fit.
Picture not included in this copy
Scubaru Stevecalgary · Jan 2, 2012#23i'm tempted to buy the dc's....
randydidThread starterAlbuquerque, NM · Jan 4, 2012#24 Originally Posted by
Jason@SportsCar ↑ Not a great shot, but here is the DC header on a 2012. Perfect fit.
Picture not included in this copy
I put a DC header on my old Matrix. It was super easy. Was your install easy?
I really want one for my SE.
randydidThread starterAlbuquerque, NM · Jan 4, 2012#25 Originally Posted by
Strider199 ↑ Thanks for the tip on the trailer hitch randydid (I'm still waiting for mine to come in, Grrr).
That Supercharger kit looks awesome. A little pricey mind you.
Have you got your hitch yet? If so, any issues? I am about to go about buying one but would love to know how it went for you.
/randy
Jason@SportsCarDebary, FL · Jan 4, 2012#26 Originally Posted by
randydid ↑ I put a DC header on my old Matrix. It was super easy. Was your install easy?
I really want one for my SE.
The hardest part is getting off the stock manifold and all of the heat shields.
NJ DriveNorthern NJ · Jan 8, 2012#27Is the traction control/stability control defeatable like the previous generation Yaris?
randydidThread starterAlbuquerque, NM · Jan 8, 2012#28 Originally Posted by
CTScott ↑ I test drove a 2012 and spent some time poking around under the hood. Based on what I saw, I believe that 06-11 engine related mods (Blitz supercharger, intakes, exhaust manifolds, etc.) will work without issue. I also have the EWDs and have found that many electrical system mods (like adding cruise control) are the same as for the 06-11.
I just put an AFE CAI on my SE. Went several days without issue. I hit the 1K mile mark and decided to get on it a bit for the first time and almost instantly I got a CEL with code P0101 which is pretty generic. It looks like the MAF is angry with all that air coming at it. I will answer some questions that anyone with experience might have: This was the first time since the car was purchased that I took the engine over 4,500 RPM. Yes, I was EXTREMELY careful with I pulled the MAF. No there is no oil on it from the filter. I am about 5,200 feet ASL. I did have a similar problem with my 2007 Matrix-it would throw a code (can't remember the number) for running lean. That seems to not be the case here. Yes, the MAF is facing the right direction.
With that...anyone out there with a CAI had their Yaris throw CEL's with similar codes?
I really was hoping that it would be an easy mod. I have a OBDII reader and I have reset the code. I will keep it below 4,000 RPM for the next few days and see if it comes back. I have put about 100 miles on the car since the installation.
Thanks!
/randy
🆘
Strider199Ontario, Canada · Jan 8, 2012#29 Originally Posted by
randydid ↑ Have you got your hitch yet? If so, any issues? I am about to go about buying one but would love to know how it went for you.
/randy
I have not purchased it yet randy. The weather is a bit cool to be working on the car outside. I did find a hitch for $104.00 US on the internet though.
StephenMenaceTucson, AZ · Jan 26, 2012#30I really want that Rotrex Supercharger kit, sadly though i do not have anywhere near the money for that haha. If I were to eventually buy the kit is there anything else I would need to do to my car? (I drive a 2012 yaris SE 5-Speed) I am new to cars when it comes to, well anything. I just started working at a Toyota dealership and bought my yaris and want to tune it up. Any suggestions on what to do to it?
NJ DriveNorthern NJ · Jan 26, 2012#31Has anyone attempted to fit 15" wheels on an SE yet?
randydidThread starterAlbuquerque, NM · Feb 20, 2012#32 Originally Posted by
NJ Drive ↑ Has anyone attempted to fit 15" wheels on an SE yet?
It comes with 16" wheels so there should be no issues going to a smaller wheel unless you mount big balloon tires on the wheels. Not sure why you would want to down-size them though.
😲
12 yarisYork,Pa · Feb 20, 2012#33The SE has larger brakes so I'm not sure if 15's will fit
12 yarisYork,Pa · Feb 20, 2012#34How about a roof rack? Canada
enviriCT · Feb 21, 2012#35yes 15s fit in your SE.
Picture not included in this copy
DJYojimboChicago · Feb 25, 2012#36I'm thinking of putting headers in my car but i do not want to add an intake or exhaust kinda defeats the purpose of buying this car to save money on gas but i do feel like i need a lil more power when on the highway sometimes. I have an auto 2012 yaris (i know it's slow)
rubhamusanknoxville TN · Feb 26, 2012#3712 yarisYork,Pa · Feb 27, 2012#38Mods include:1/8in" single blue pin stripe(very subtle),smoke window tint
(all windows),Sport Edition CD's wheels.
skuzzlebutt5Bay Area, California · Mar 5, 2012#39TimmyTwo2The Queen City · Mar 21, 2012#40 Originally Posted by
NJ Drive ↑ Is the traction control/stability control defeatable like the previous generation Yaris?
My 2012 LE 3 Door has a traction control button next to the handle for the e-brake. I think that's your question.
Jason@SportsCarDebary, FL · Mar 21, 2012#41 Originally Posted by
TimmyTwo2 ↑ My 2012 LE 3 Door has a traction control button next to the handle for the e-brake. I think that's your question.
That only shuts it off temporarily, once you hit 30mph (if my memory serves me) it automatically turns back on. 🙁
If you want it to stay off you need to put the car in test mode with the secret handshake.
trac button dash lights NJ DriveNorthern NJ · Mar 21, 2012#42Now that I have the car in my possession, a short press disables traction control, while a long press disables both traction and stability control. Note that you're only capable of doing either when stopped. The car remains in either condition until shut off or if the button is pushed.
Jason@SportsCarDebary, FL · Mar 21, 2012#43 Originally Posted by
NJ Drive ↑ Now that I have the car in my possession, a short press disables traction control, while a long press disables both traction and stability control. Note that you're only capable of doing either when stopped. The car remains in either condition until shut off or if the button is pushed.
Nice to see they revised that... Holding the button down had no effect on our pre-production unit - but that and the ABS are long gone in Prod trim.
NJ DriveNorthern NJ · Mar 23, 2012#44UR rear sway bar (23mm) weighs 13.25 lbs in case anyone is curious. Install and fit were very good.
Scubaru Stevecalgary · Mar 24, 2012#45 Originally Posted by
Jason@SportsCar ↑ That only shuts it off temporarily, once you hit 30mph (if my memory serves me) it automatically turns back on. 🙁
If you want it to stay off you need to put the car in test mode with the secret handshake.
trac button dash lights
you could do the secret handshake.... or! at a complete stop you can hold the traction control button down for 3-5 seconds and it kills traction control and stability control. works in Canadian models!
oohcoryChicago, IL · May 30, 2012#46Im going to pick mine up tommorow. And im curiois, do the previous gens strut bars and catback exhausts fit the 2012?
oohcoryChicago, IL · May 30, 2012#47And I should say the Tanabe concept G to be specific.. 🙂
muffin_topMidwest · Jun 9, 2012#48I got an e-mail back from Tanabe yesterday, testing is all this month and availability in July presuming all goes well.
Can't wait, the factory exhaust has a note. Sounds like rocks in a blender when you give her the beans.. Awful.
palmaimevasereth · Jun 11, 2012#49 Originally Posted by
Fortmax ↑ Will the center armrest on 2011 Yaris fits on 2012 Yaris ?
on my new yaris instaled the "my garage" type of central armrest with some minor modification👍
tooterLos Angeles · Jun 11, 2012#50 Originally Posted by
oohcory ↑ Im going to pick mine up tommorow. And im curiois, do the previous gens strut bars and catback exhausts fit the 2012?
As far as I know, they do...
I've installed a 2nd gen rear sway bar, 2nd gen strut tower bar, and a 2nd gen axleback exhaust on my 2012 hatchback with no fitment problems.