Yarisworld Archive

trac button dash lights

12 posts · 22,861 views

matthewaiOriginal postunited states · Feb 2, 2011#1
when you turn trac off and hold it down for a few seconds these 2 lights come on....is it okay to drive around like this on a regular basis?

thanks

1 attachment not included in this copy

Replies 11

Black_griffin6Atlanta Georgia · Feb 2, 2011#2
This is a stupid question, but how do you turn it off? XD
ilikericesavannah, ga · Feb 2, 2011#3
for the 09-10 models

car off, hand brake up
start car
depress brake 2 times brake brake (hold 2nd brake while doing next step)
handbrake down, up, down, up
release brake and depress brake 2 more times

your trac light should then come on and will turn off when u turn the car off..so u gotta do this every time you start the car. if you start the car and wait over a min, u will have to turn off car and start over. if you screw up the sequence, just turn the car off and start over.
sickpuppy1Kansas · Feb 2, 2011#4
I just press the button! On the console of my '10 sedan.....
did it last night...we got 10-12 inches of snow, and I couldn't get on my street, so I parked it about a block away.After the plows came through about 1030pm. I went down to retrieve my car, and of course it was buried in by plows. I dug it out for awhile,but it was still stuck. Traction control kept power so low I'd never get out. So I turned it off and gun'd my way thru it. Shes nice and warm in the garage now!! (Only to have to go back to work today......)
sickpuppy1Kansas · Feb 2, 2011#5
And my dog is upset too,lol....Small dog having a hard time finding somewhere to go potty out there,lol
billfiresSE Mass · Feb 2, 2011#6
Does this only work for automatic transmissions? Bill C
ilikericesavannah, ga · Feb 2, 2011#7
i got a 2010 liftback and it does not come with the vsc switch/button. this proccedure is for those yaris who does not have the vsc switch/button. i have a manual transmission btw.
rick996Coventry, CT · Feb 2, 2011#8
Yesterday during a snowstorm I had to make a left at a stop sign up a hill. I stayed in first gear but the traction control kept throttling the engine back and I went slower and slower and just barely made it up the hill. So I went back down the hill to the same intersection pulled in a parking lot and went through the brake sequence to turn off traction control. This time when I left a stop sign I was able to accelerate all the way up the hill.

Is there a way to just disable the throttle back portion without disabling traction control and stability control?
JumpmanYarisSO. INDIANA · Feb 2, 2011#9
Originally Posted by Black_griffin6 ↑
This is a stupid question, but how do you turn it off? XD
That was a dumb post on ur behalf, No question is stupid, yet you cant answer it for him and on top of that u add another question. FAIL
matthewaiThread starterunited states · Feb 2, 2011#10
^^^ bahhhahah yeah my orig question was not answered yet but thats okay ...yes i have the button im just asking because im under the impression that with the trac "on" (dash lights off) there is less power to the wheels so i just turn trac off unless its really bad out ie snow ice what have you and yes i know the power gain is prob very minimal if not its all in my mind
Black_griffin6Atlanta Georgia · Feb 2, 2011#11
Originally Posted by JumpmanYaris ↑
That was a dumb post on ur behalf, No question is stupid, yet you cant answer it for him and on top of that u add another question. FAIL
Pardon me for asking a question related to the topic. 🙄

OP: It's probably fine, it's just another safety feature. It would be like turning your passenger's airbag off, it won't really affect your passenger unless you get into a crash, so turning off your trac won't really affect you unless you encounter some bad/slippery weather or conditions.
matthewaiThread starterunited states · Feb 2, 2011#12
ohhh yeah no worries man i didnt even know you could do the ebrake procedure if you didnt have the button