Yarisworld Archive

2012 mods/Parts

89 posts · 334,185 views · page 2 of 2

Replies continued

muffin_topMidwest · Jun 11, 2012#51
Originally Posted by tooter ↑
As far as I know, they do...

I've installed a 2nd gen rear sway bar, 2nd gen strut tower bar, and a 2nd gen axleback exhaust on my 2012 hatchback with no fitment problems.
Does it appear that the exhaust tip exits in the same place between the 2nd and 3rd gen? I want to order the Tanabe Touring exhaust, but it appears the exit point could be just slightly more outboard on the 2nd gen. Dunno. I've been looking closely at the pics and read your remarks on fitment. The only concern I have is that the SE/RS rear bumper has the fake splitter at the bottom wheras the L/LE does not.

Any ideas?
12 yarisYork,Pa · Jun 11, 2012#52
I removed muffler and tailpipe,sounds great,cost? 0
tooterLos Angeles · Jun 11, 2012#53
Originally Posted by Scubaru Steve ↑
i'm tempted to buy the dc's....
If you haven't gotten the dc yet, let me tempt you with the Weapon R 4-2-1 header... 😉

Picture not included in this copy
tooterLos Angeles · Jun 11, 2012#54
Originally Posted by muffin_top ↑
Does it appear that the exhaust tip exits in the same place between the 2nd and 3rd gen?
I installed a completely different 2nd gen exhaust on my 2012 with nothing to compare it to so I don't know specifically about your situation. I just know that a 2nd gen exhaust fit a 3rd gen car.
Picture not included in this copy


I want to order the Tanabe Touring exhaust, but it appears the exit point could be just slightly more outboard on the 2nd gen. Dunno. I've been looking closely at the pics and read your remarks on fitment. The only concern I have is that the SE/RS rear bumper has the fake splitter at the bottom wheras the L/LE does not.

Any ideas?
The Tanabe's are really cool.👍
Ask Garm at Micro Image:
http://www.microimageonline.com/
He should know for sure if it'll fit your vehicle.
muffin_topMidwest · Jun 12, 2012#55
Tooter-

Thanks for the reply, and the photo of your exhaust! The center exit looks damn cool and right at home on your car.

I will shoot Garm an email about the Tanabe setup, hopefully he can help. Back in the day I had the Touring Medalion on my '89 Civic Si hatch. Great sound and excellent fit. My dilemma is that I want something that looks and sounds mature. Definitely don't want anything that sounds fartastic.

Good color 040 for the win!! 👍
muffin_topMidwest · Jun 13, 2012#57
Appreciate the links on the sound clips. 👏

I can't get over how tasty the center exit MI exhaust looks. Sounds mean too!

Were I sure the current Tanabe Touring p/n would fit my '12, it would be on the way.

In other news my JDM RS side skirts came in today! 👍

The part numbers were good for the US ordering system but none of the PDC's showed them in stock. After buring a favor in the parts department they made some calls and were able to get them somewhat quickly. Just for fun, we tried all the color codes and all but the "Gin Buck" were available for order. They came already painted with the light grey rubber border already installed. Only extra items were the white screw plugs for the front fender hardware, couple screws and grommets. Only bad part was the stomach burning $917 for the lot... and thats at 10% over dealer cost. Yikes!

Picture not included in this copy

Picture not included in this copy

Should have them on tomorrow if all goes well..
Scubaru Stevecalgary · Jun 13, 2012#58
Originally Posted by tooter ↑
If you haven't gotten the dc yet, let me tempt you with the Weapon R 4-2-1 header... 😉
i will probably go with the weapons, id rather the mid range, this little car needs the power on the highway, i'm used to 3 times the torque :(

are there any linear springs available? i'm not a fan of progressive.
tooterLos Angeles · Jun 14, 2012#59
Originally Posted by Scubaru Steve ↑
i will probably go with the weapons, id rather the mid range, this little car needs the power on the highway
Same here. Our driving is all between 2,000 and 3,000 rpm even on the freeway in 5th gear. So I got a 4-2-1 header that helps that range the most. (Micro Image has the lowest Weapon R price around. 😉 )

i'm used to 3 times the torque :(
Everything I drive is gutless... but gets good mileage. 😆

are there any linear springs available? i'm not a fan of progressive.
None that I've ever heard of. Although others here are way more knowedgeable about suspension then I am.
why?harnett county NC · Jun 14, 2012#60
Originally Posted by Scubaru Steve ↑
i will probably go with the weapons, id rather the mid range, this little car needs the power on the highway, i'm used to 3 times the torque :(

are there any linear springs available? i'm not a fan of progressive.
So far everything from the second gen fits. And I don't think the suspension was changed at all, so everything still should fit. Take a look at what MI sells for a start.
tooterLos Angeles · Jun 14, 2012#61
Originally Posted by muffin_top ↑
Should have them on tomorrow if all goes well..
Well, muffin... it's tomorrow.
Where's the pics?

(just clownin' around... 😉)

When you do get the gaurds installed, I'd really like to see them. 👍
Scubaru Stevecalgary · Jun 15, 2012#62
Originally Posted by why? ↑
So far everything from the second gen fits. And I don't think the suspension was changed at all, so everything still should fit. Take a look at what MI sells for a start.
thats the only parts site i look at 🙂
only some list as progressive and others say nothing. oh well, and yes i will be getting the weapon r from there one day, i got my afe intake from there too.
why?harnett county NC · Jun 15, 2012#63
Originally Posted by Scubaru Steve ↑
thats the only parts site i look at 🙂
only some list as progressive and others say nothing. oh well, and yes i will be getting the weapon r from there one day, i got my afe intake from there too.
Hmm, I know MI are linear, I thought most of the other brands were too. It seems even Eibach though are progressive. The springs that list a rate are linear, the only other ones seem to be the Tein S-techs.
HowlingKingBrisbane · Jun 15, 2012#64
Originally Posted by why? ↑
Hmm, I know MI are linear, I thought most of the other brands were too. It seems even Eibach though are progressive. The springs that list a rate are linear, the only other ones seem to be the Tein S-techs.
Would the Tein S-techs fit on the new Yaris? I know the answer is yes, but I want to clarify it once again.
muffin_topMidwest · Jun 15, 2012#65
Originally Posted by tooter ↑
Well, muffin... it's tomorrow.
Where's the pics?

(just clownin' around... 😉)

When you do get the gaurds installed, I'd really like to see them. 👍
My body shop chickened out, they weren't feeling like drilling 14 holes in my rocker panel... Sissies! 🤷

I'm putting them on now, should have pics shortly!
muffin_topMidwest · Jun 15, 2012#66
Alrighty then.. Got them installed, wasn't a super awful time as had anticipated. Here is a shot from early this morning.

Wheel specs; Rays Engineering Gram Light 57 Optimise (Ceramic White) 16x6.5 +45 offset with 205/45-16 Dunlop Direzza DZ101. Stock RS/SE suspension for now... 😳

Picture not included in this copy

After..

Picture not included in this copy
why?harnett county NC · Jun 18, 2012#67
Originally Posted by HowlingKing ↑
Would the Tein S-techs fit on the new Yaris? I know the answer is yes, but I want to clarify it once again.
Yes the suspension is identical. And to make it 100% sure order from Micro Image and they will do everything they can to make you happy.
tooterLos Angeles · Jun 18, 2012#68
Originally Posted by muffin_top ↑
Alrighty then.. Got them installed, wasn't a super awful time as had anticipated. Here is a shot from early this morning.

Wheel specs; Rays Engineering Gram Light 57 Optimise (Ceramic White) 16x6.5 +45 offset with 205/45-16 Dunlop Direzza DZ101. Stock RS/SE suspension for now... 😳

Picture not included in this copy

After..

Picture not included in this copy
Nice. 👍

It subtly aligns the lower edges.
GreenbeanWNC · Jun 18, 2012#69
Originally Posted by muffin_top ↑
Alrighty then.. Got them installed,
Looking good man! 🙇

I also wanna give you props on the EG I see hiding there!
👍
muffin_topMidwest · Jun 18, 2012#70
Originally Posted by tooter ↑
Nice. 👍

It subtly aligns the lower edges.
Originally Posted by Greenbean ↑
Looking good man! 🙇

I also wanna give you props on the EG I see hiding there!
👍
Thanks for the kind words gents! The EG and EM1 to the right were both massive balls of poo when purchased.. Honestly the EG was headed for the scrap yard before I rescued her. I find these cars and start to feel sorry for them, kinda like a lost dog or something.. My body and paint guy is in line for sainthood after those two. 😳

I found it quite irritating that our Canadian friends get the skirts as standard and we Americanos get the shaft!! I'm feverishly working on trying to import a Modellista front lip, grille surround and headlight eyelids to complete the look. Must. Resist. Yahoo. Japan. Auctions!

To sorta keep the spirit of the new parts/mod theme of the thread, I received word today on the US spec armrest for Yaris. Should be available in fall and was told it would differ from the JDM setup that is nothing more than a storage box. It has a part number assigned, but of course shows no availability. Retail was like $247. I'll post up the part number tomorrow so you can get the pre-order on at your local Toyota d-ship. I'm hoping for storage plus padded cover for my lonely elbow..
Val E UmNashville, TN · Jun 24, 2012#71
Hey muffin, what's the part number for that storage box? I definitely want to pre-order one.
Yaris SE RunnerNiagara Falls NY. · Jun 24, 2012#72
Thanks for the info. on the center arm rest. Now I can stop looking and just wait, I hate waiting. The Toyota dealers have been no help, it didnt even have a part # when I was looking. I was going to order a JDM one but couldn't get a straight answer about fitting for the American Yaris.
muffin_topMidwest · Jul 19, 2012#74
Part number for the US spec armrest is:

PT413-52120

It's showing a MSRP of $209 without installation charge. Still no update as to the contruction of this item. We were told that it would be different than the JDM unit which has no padded elbow rest. I've been checking it weekly to see if it pops a ship date. So far the tentative eta is late fall.
Scubaru Stevecalgary · Jul 20, 2012#75
Well, can you guess my next item ready to go in?!
Picture not included in this copy
i have way to many 1nzfe parts 😉 its the dc sports header, just arrived today and hopefully going in tomorrow.
Scubaru Stevecalgary · Jul 22, 2012#76
Installed! so this evened out the power band immensely the car actually has low end torque, as in 1500rpm, i usually only drive the car around 15-2000rpm and it works great, mid range feels improved. high end? the car still feels slow but I'm sure its helped. the piece is beautiful and fits awesome, no problems with install. the ceramic coating does keep the head down. i highly recommend this from microimage!

Picture not included in this copyPicture not included in this copy
Yaris SE RunnerNiagara Falls NY. · Jul 31, 2012#77
👍

3 attachments not included in this copy

Scubaru Stevecalgary · Jul 31, 2012#78
Originally Posted by Yaris SE Runner ↑
👍
those firestone bags, are you just using them for when you load the car? i have been debating lowering and then using those in the rear to maintain height. take some detailed pics of install please!
GreenbeanWNC · Jul 31, 2012#79
Looking good man. You make me want a new Yaris bad. I remember modding my first Civic almost every weekend for almost 8 months. The joys of livng at home and working a good job! Sometimes I miss the days of my youth, Lol...
Yaris SE RunnerNiagara Falls NY. · Jul 31, 2012#80
How do I make the pics for all to see ?

Yes the back end is already starting to sag , with the undercoating, 2 Alpine 500 watt amps and a Alpine 12'' sub in a 1 cu. box in the back more about that stuff to come later.

I haven't even put a cooler or two duffel bags in the back for a road trip. So yes I will be using them to keep the car level no matter what the load. I have used them in 4 other vehicles and loved the control of the suspension.

I will be using a lift for the install just to get some good pics.
CTScottUSA, CT · Jul 31, 2012#81
Originally Posted by Yaris SE Runner ↑
How do I make the pics for all to see ?

Yes the back end is already starting to sag , with the undercoating, 2 Alpine 500 watt amps and a Alpine 12'' sub in a 1 cu. box in the back more about that stuff to come later.

I haven't even put a cooler or two duffel bags in the back for a road trip. So yes I will be using them to keep the car level no matter what the load. I have used them in 4 other vehicles and loved the control of the suspension.

I will be using a lift for the install just to get some good pics.
They are a bear to get into our tiny springs. I installed a set on Crashy to keep her tail up when I fill her dump bed with topsoil. I think every knuckle was bleeding by the time I finished.
Yaris SE RunnerNiagara Falls NY. · Aug 7, 2012#82
To start no pics yet. just put everything on yesterday. At work posting now.



1, K&N Typoon air cleaner went on.👏 Very easy took about 1/2hr. sounds great pulling from 1500rpm to 4000rpm roaring, thats as high as I have taken the SE so far. It lowered the RPM doing 70mph by 300 to 400rpms, have to check notes.

2, TRD rear bar took about 20min. only got to test a little. Did hit a few exit and entrance ramps it does sit much flatter in the corners, picked up 15 mph in the first try, need more testing👍

3, coil rite air bags went in 1/2 hr, no bloody knuckles🎉, rides great, work great plenty of lift left for full loads. SE sitting level again.👏

4, Exhaust did not fit.👎 The tail pipe exited almost 3 in. to the right, center of tip and center of AD exhaust cut out.👎

I guess I'll just have to wait for an exhaust for the SE 😢
muffin_topMidwest · Aug 8, 2012#83
Originally Posted by Yaris SE Runner ↑
To start no pics yet. just put everything on yesterday. At work posting now.



1, K&N Typoon air cleaner went on.👏 Very easy took about 1/2hr. sounds great pulling from 1500rpm to 4000rpm roaring, thats as high as I have taken the SE so far. It lowered the RPM doing 70mph by 300 to 400rpms, have to check notes.

2, TRD rear bar took about 20min. only got to test a little. Did hit a few exit and entrance ramps it does sit much flatter in the corners, picked up 15 mph in the first try, need more testing👍

3, coil rite air bags went in 1/2 hr, no bloody knuckles🎉, rides great, work great plenty of lift left for full loads. SE sitting level again.👏

4, Exhaust did not fit.👎 The tail pipe exited almost 3 in. to the right, center of tip and center of AD exhaust cut out.👎

I guess I'll just have to wait for an exhaust for the SE 😢
Curious, which exhaust is that? It looks like the Tanabe from the side, but I can't tell.

I bought the TRD exhaust and other than the tip being small and a little low, it is perfectly centered in the OEM cutout. It also has a nice burble at idle and mature note when accelerating. Very little increase in cabin noise at highway speeds was a nice surprize.
Yaris SE RunnerNiagara Falls NY. · Aug 10, 2012#84
It was the A'pex-i World Sport 2 Hybrid Megaphone Exhaust, really a sweet looking exhaust. I went with it just because of the rolled tip edge.
muffin_topMidwest · Aug 10, 2012#85
Originally Posted by Yaris SE Runner ↑
It was the A'pex-i World Sport 2 Hybrid Megaphone Exhaust, really a sweet looking exhaust. I went with it just because of the rolled tip edge.
So there was no way to move the hangars around to get it centered? Three inches is quite a bit though.

By chance, did you take a pic of it on the car before you removed it?
Yaris SE RunnerNiagara Falls NY. · Aug 10, 2012#86
No the round part of the exhaust ( canister) was already right next to the heat shield, which is right next to the under body of the car. So there was no way to alter it and push it over. No pics. was a lil po (disapointed) at the time. I wish I would have taken a pic of the 2 exhausts next to each other, after thought, then you would have seen why it wouldn't fit. The meg. exhaust exits straight back from the hangers and the stock SE exits to the left of the hangers.. I really thought all I would have to do was alter it by bringing it up, but that wasn't the case.

Was the TRD tip smaller then the stock SE tip ? Did you alter to lift it up ?
muffin_topMidwest · Aug 13, 2012#87
No, I left it where it is. Honestly I think the TRD tip is actually smaller than the stock SE. Fail.

I really want to try the Tanabe to see where it exits.

Got a price quote on the Fujitsubo, $1400 seems somewhat dear.. 👎
Yaris SE RunnerNiagara Falls NY. · Aug 14, 2012#88
😳