Yarisworld Archive

Stickerbombing dash pieces!

173 posts · 63,471 views · page 1 of 4

mr_milesOriginal postPortland, OR · Nov 21, 2011#1
has anyone else done this? I did mine today because of the paint splatter. i've been slowly trying to get it off but the paint is so robust i'm doing more damage to the plastic than the paint specks! so for now i sticker bombed them and my wink mirror. someday i'll find new dash pieces and keep them on the side.

stickers have been applied, mod podge is slowly making its way on there now :D

Picture not included in this copy

Replies 172

Klink10910 · Nov 21, 2011#2
That is cool. I'm sorry the paint isn't coming off. My one and only idea was what I described to you. Anyway, post up when pieces are back on.
bzinn 1University Place,WA · Nov 21, 2011#3
Honestly I love sticker bombs......looks good.
eTiMaGoBangkok, Thailand · Nov 21, 2011#4
this should be interesting!
jpmck03USA · Nov 21, 2011#5
"Stickerbombing"? So that's what they call that... Didn't know that anyone came up with a term for that...

Should look interesting when it's put back in the car.

😉
EPyarisdriverEl Paso TX · Nov 21, 2011#6
I love this!!!
henryleeUnited States · Nov 21, 2011#7
Any photos installed?
contraband831CEN*CAL · Nov 21, 2011#8
i likes, pics of the pieces installed please...
mr_milesThread starterPortland, OR · Nov 21, 2011#9
Originally Posted by Klink10 ↑
That is cool. I'm sorry the paint isn't coming off. My one and only idea was what I described to you. Anyway, post up when pieces are back on.
It's alright, i was most likely going to do it sooner or later anyways, lol :D

I'm surprised it didn't work as well myself. Turns out nail polish remover seemed to do the best in the long run, but it discolored the plastic pretty bad(worse than the mineral spirits were). it did take it off the wiper stalk with no harm, though. difference in plastics, i guess. I'll get new dash pieces sooner or later and have a regular set too.

They'll be back in the car tomorrow morning, and possibly the wink mirror as well. gotta figure out how i'm going to mount it without drilling any holes, if I can.
403RSCalgary, Canada · Nov 21, 2011#10
Stickerbomb2 ftw!

Still layering on the rattle-can clear onto my ski rack.
mr_milesThread starterPortland, OR · Nov 21, 2011#11
Lol, nice. I wish i had a ski rack to Stickerbomb :/
henry33slovakia · Nov 22, 2011#12
how did you do that ? it is just sticking the stickers here and there so you cover the whole area ? did you use some clear coat afterwards ?
thanks
please post the instal pics
mr_milesThread starterPortland, OR · Nov 22, 2011#13
yeah, it's just putting the stickers all over it however you feel like, I'll take some close up pics tomorrow also. some are overlapping, some are right next to each-other. if you look close you can still see some black plastic under too. I even cut some up to get it just how I wanted.

Afterwards, you coat the stickers with a clear acrylic adhesive / sealer / finish. I use "Mod Podge" which can be required at pretty much any store that has a craft section. (i got mine at micheals arts and crafts, but Walmart carries it also) It comes in a spray can form, and brushable form. this time i used brushable. if it would have been a larger flat piece i would have used the spray can.

I used the Matte finish, as a friend of mine who did his used gloss, and i wanted to be a tad different. both end up with excellent results. Mod Podge goes on white, but dries clear, so don't freak out, lol.
henry33slovakia · Nov 22, 2011#14
looks great ;)
can wait to see the pics ;)
Klink10910 · Nov 22, 2011#15
Originally Posted by mr_miles ↑
It's alright, i was most likely going to do it sooner or later anyways, lol :D

I'm surprised it didn't work as well myself. Turns out nail polish remover seemed to do the best in the long run, but it discolored the plastic pretty bad(worse than the mineral spirits were). it did take it off the wiper stalk with no harm, though. difference in plastics, i guess. I'll get new dash pieces sooner or later and have a regular set too.

They'll be back in the car tomorrow morning, and possibly the wink mirror as well. gotta figure out how i'm going to mount it without drilling any holes, if I can.
Suffice to say that MS is all I use on my plastics when it comes time to remove and re-treat with the UV stuff that I use. Never had an issue. With that said I am currently pondering getting a few new pieces and doing a paint or carbon fiber on them.
enviriCT · Nov 22, 2011#16
looking good! but watch out cause the speedometer likes to reflect EVERY SINGLE THING. I wrapped my speedometer trim with cf before and on really sunny days i cant see the gauges cause of reflection/glare. I took it off for a more classy leather :)
mr_milesThread starterPortland, OR · Nov 22, 2011#17
Originally Posted by Klink10 ↑
Suffice to say that MS is all I use on my plastics when it comes time to remove and re-treat with the UV stuff that I use. Never had an issue. With that said I am currently pondering getting a few new pieces and doing a paint or carbon fiber on them.
I wonder if the discoloration i was seeing was the uv protection being removed, and a little bit of the paint smearing. the Kleen Strip was working, but i stopped because i thought I was staining the plastic, lol.

anyhow, it's pouring rain and I'm trying to convince myself to go put these in before i have to go get my windshield re-sealed. Dang Oregon....
mr_milesThread starterPortland, OR · Nov 22, 2011#18
STICKERS. anyhow, here's some pics of it all back in the car! should have done the stereo surround when i fit that in there :O gotta get rid of the stock stereo and AUX adapter, too.....

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
henry33slovakia · Nov 22, 2011#19
wow looking good
are you planning also some other parts ?
where did you bought the stickers ?
jpmck03USA · Nov 22, 2011#20
Originally Posted by mr_miles ↑
STICKERS. anyhow, here's some pics of it all back in the car! should have done the stereo surround when i fit that in there :O gotta get rid of the stock stereo and AUX adapter, too.....
...


Ha, that looks pretty neat! 🎉

The glare on the speedo looks like it'll be killer when it's sunny out though!
contraband831CEN*CAL · Nov 22, 2011#21
Originally Posted by henry33 ↑
wow looking good
are you planning also some other parts ?
where did you bought the stickers ?
just google stickerbomb book and you will find the stickers, i was thinking about getting a wink mirror and doing this because it came out very nice..👍
ROCKLAND TOYOTAROCKLAND COUNTY NY · Nov 22, 2011#22
doing this on my HOME DEPOT lip. slowly coming along BUT looks good with the JDM trd sticker sheets i bought.....
mr_milesThread starterPortland, OR · Nov 22, 2011#23
Yep, i used "sticker bomb 2". you can buy the first and second one at Barnes and Nobles, and I'm sure other bookstores as well. There's probably lots of other books with stickers like that too.

I'm thinking about doing the cup holders next, and possibly the little item tray in front of the shifter.

the glare on the speedo isn't as bad as i thought it was going to be, but it is there.
jpmck03USA · Nov 22, 2011#24
Originally Posted by mr_miles ↑
... the glare on the speedo isn't as bad as i thought it was going to be, but it is there.
Good to hear! 🙂
ROCKLAND TOYOTAROCKLAND COUNTY NY · Nov 22, 2011#25
Originally Posted by contraband831 ↑
just google stickerbomb book and you will find the stickers, i was thinking about getting a wink mirror and doing this because it came out very nice..👍
EBAY has sticker sheets as well......
mr_milesThread starterPortland, OR · Nov 22, 2011#26
I'm thinking of putting some sort of film over the speedo plastic to get rid of the glare, also. not quite sure what I would use though....
henry33slovakia · Nov 22, 2011#27
keep posting the photos once you are done ;)
JumpmanYarisSO. INDIANA · Nov 22, 2011#28
Hey it doesn't look bad at all
Klink10910 · Nov 22, 2011#29
Yes it does look kinda neat.
eTiMaGoBangkok, Thailand · Nov 22, 2011#30
Originally Posted by mr_miles ↑
I'm thinking of putting some sort of film over the speedo plastic to get rid of the glare, also. not quite sure what I would use though....
matte screen protector for laptop/ipad/whatever, should do the trick :)

sticker job looks great btw :)
mr_milesThread starterPortland, OR · Nov 22, 2011#31
Originally Posted by eTiMaGo ↑
matte screen protector for laptop/ipad/whatever, should do the trick :)

sticker job looks great btw :)
glad someone else has the same idea! hopefully i can find one in the next day or two.
mr_milesThread starterPortland, OR · Dec 16, 2011#32
been slackin, haven't looked for the matte laptop screen protector, but i did another dash piece! oh look, pictures.

Picture not included in this copy

Stickers with first coat of Mod Podge, don't worry, it dries clear! also, don't worry about the stuff on the sides, we cut that later.

Picture not included in this copy

Peppercorn thinks she can help, as usual. Glad she didnt try to lay down on this one, she has a thing with laying on whatever I'm doing.

Picture not included in this copy

Hey, look at that. Four coats of Mod and a razor blade to cut the stickers i pushed into the lock button housing (after it all dried) so the lock could function freely, and it's done! thinking about carefully cutting out the other accessory covers so i can add things to them in the future. i almost drilled a hole in one and put a switch in it, but i opted not to in case i go another route when i need a switch.

Pictures of it in car soon!

In car picture edit GO!

Picture not included in this copy

Picture not included in this copy

at first i did not like the cup holders, but they grew on me. i am pleased with how the switch panel turned out, also. :)
DadamsCypress, Tx · Dec 16, 2011#33
That looks pretty bad-ass! I'm not sure it would look good with my color scheme so I probably won't do it but yours looks great!! Got a question on the panels though I've been able to get the center console accent pieces off, is the door accents and other pieces relatively the same?
cali yarisCanoga Park, CA · Dec 16, 2011#34
It think you should do the whole dash. The whole car. 👏
mr_milesThread starterPortland, OR · Dec 16, 2011#35
I haven't pulled my doors apart yet, but likely doing that tomorrow. Ebay sent my speaker adapters to the wrong address and now it looks like i spent money for nothing, since he wont respond to emails. >:( Guess i'll just remove the stock speaker from its enclosure and modify it like i did for the rears.


but yeah, most the pieces just pop right out, the cupholders were a bitch. there's a chance i'll do the upper portion of the door's arm rest by the cup holders, but I'm not sure. running out of stickers, lol. gotta go buy the other sticker bomb book.

Lol Garm, that would be interesting. Don't know if i could handle that, though :p
DadamsCypress, Tx · Dec 17, 2011#36
Cool cause I'm most likely going to be completely OCD about it and paint everything inside that's light grey either black or red :P
YAR1SRaleigh, NC · Dec 17, 2011#37
pretty neat! if you nee help with installing wink mirror let me know its easy just got to drill two holes in sun visor mount area (wont ruin the visors if you want to go back stock however using visors and wink is impossible i think....
mr_milesThread starterPortland, OR · Dec 17, 2011#38
Dadams - Rit Dye. get a big tub that you can completely submerge parts into, and dye them. it will never chip or peel or flake!

Jen - someone linked me to the mirror mounts that glue to the windshield like stock mirrors, so i think im gonig to go with those <3
DadamsCypress, Tx · Dec 17, 2011#39
I never thought of dying them... That's a pretty good idea! Saves a lot of time that's for sure :P does that only require one coat? Better yet is there a DIY on it?
mr_milesThread starterPortland, OR · Dec 17, 2011#40
Sure is!

DIY Change Your Interior Light Grey Panels to Black

its not so much a coat as it is....boiling parts. coloration depends on how long you dye them!


what to sticker bomb next.......thinking the rear center upper seatbelt mount. it would be obnoxious. I like obnoxious.
DadamsCypress, Tx · Dec 17, 2011#41
Sounds good dude! Can't wait to see it!
mr_milesThread starterPortland, OR · Dec 17, 2011#42
then i shall do it tomorrow, lol. wonder how to remove it :O
I pulled the seatbelt as soon as i got home after buying the car, i couldn't stand seeing it out the rear view mirror.
DadamsCypress, Tx · Dec 17, 2011#43
Yeah I kinda just got used to it :P
kacWest/Central Illinois · Dec 17, 2011#44
Looks good
mr_milesThread starterPortland, OR · Dec 18, 2011#45
Plonk. Covered the big opening on this, figured why not? I wont be putting that seat belt back in. Mod Podging it now, will be in car hopefully before i go to work today :D

Picture not included in this copy
stuffyontario, canada · Dec 18, 2011#46
looks great!
DadamsCypress, Tx · Dec 18, 2011#47
Agreed!
mr_milesThread starterPortland, OR · Dec 18, 2011#48
yay, 4th coat of mod podge is drying.

Also, in case anyone is wondering about removing stuff like this later on in life, it is very simple. the mod podge actually makes removing the stickers easier, since it strengthens the paper. it wont rip leaving the stick and half the paper down. it comes off with that satisying *pop* sound that happens when it all comes off clean :)

I'm wondering about either dying or replacing my headliner with a black one, or removing it and re-upholstering it. if i re-upholster it, i'm thinking black and red checkerboard. I've never done a headliner......anyone have any insight on that?


Edit: PEEKTURZ

Picture not included in this copy

Picture not included in this copy

I like. yeah I realized i put a few upside down. Whoops.
DadamsCypress, Tx · Dec 18, 2011#49
First off new piece looks great! And I've actually wanted to replace the headliner as well to black but I'm not sure how to do it either I was going to try and look for a professional to do it but I'm not sure where to take it
mr_milesThread starterPortland, OR · Dec 18, 2011#50
I wouldn't have any idea on where to take it to have someone else to do it...... I dislike it when shops work on my vehicles anyhow. Last resort sort of thing.'


my old bosses wife does upholstery, maybe I'll ask her if she wants to do it for me. or teach me.