Yarisworld Archive

xB final drive swap thread

73 posts · 25,056 views · page 1 of 2

cali yarisOriginal postCanoga Park, CA · Sep 19, 2011#1
I know this is posted in several threads, I figured those doing this swap could post in here, in one thread for this mod.

Besides the following parts, you'll need shims. There are about 12 part numbers for those, most shops would get a couple of each and work from there.

33321-52110, output shaft
41221-52270, ring gear
90105-11040, ring gear bolts (8)

Mine came in today:

Picture not included in this copy

I'll post more pics as this progresses.

Replies 72

fnkngrvIn The Hotbox · Sep 19, 2011#2
nice...what are your personal goals with this?
Flipper_1938Kentucky · Sep 19, 2011#3
Final drive ratio changes from what to what?
cali yarisThread starterCanoga Park, CA · Sep 19, 2011#4
what are your personal goals with this?
better acceleration. If I could be in the middle of 3rd instead of the bottom coming out of turns, I could be a lot faster.
cali yarisThread starterCanoga Park, CA · Sep 19, 2011#5
I think these are correct.

2007 Yaris:

1st 3.54:1
2nd 1.90:1
3rd 1.31:1
4th 0.96:1
5th 0.81:1
Reverse 3.25:1
Final Drive 3.72:1

Scion xB 1st gen:

1st 3.54:1
2nd 1.90:1
3rd 1.31:1
4th 0.96:1
5th 0.81:1
Reverse 3.25:1
Final Drive 4.31:1
netz2008chicago · Sep 19, 2011#6
"I could be faster" says the man with a 357 whp Yaris rofl
I'm actually really curious as to what this'll do for your car!
CrankyOldManWest Michigan · Sep 19, 2011#7
Pardon the tangent, but...

I prefer to keep all three decimal places to avoid confusion with similar ratios available on variants of the C5* line. Yes, I've spent entirely too much time researching this. =)

Yaris (non Vitz RS) C50:
1st 3.545:1
2nd 1.904:1
3rd 1.310:1
4th 0.969:1
5th 0.815:1
Final 3.722:1

Vitz RS C56 close ratio:
1st 3.166:1
2nd 1.904:1
3rd 1.392:1
4th 1.301:1
5th 0.815:1
Final 4.312:1

My dream Frankensaxle:
1st 3.166:1
2nd 1.904:1
3rd 1.392:1
4th 1.031:1
5th 0.725:1
Final 4.312:1

Why go through the trouble? Well, because I hate getting stuck below the power band in second gear. The redline speed of 1st is very close to the stock, but because of the taller ratio the drop is only about 2400 rpm to second--instead of 2900. A rev-limit shift would in theory land you just over 4k, right in the sweet spot of the stock/NA torque curve. The internal ratio of 2nd is the same for all C5* series gearboxes, and the drive gear is integrated into the input shaft. Can't change it without customizing the whole shaft. The benefit here is from the shorter final drive ratio, as well as the shorter ratios in 3rd/4th. Sure, you give up a ton of theoretical top end speed, but if you don't ever plan on driving over 100mph, you'll never know it's gone.

The super-tall overdrive ratio in 5th is to compensate for highway cruising. When driving like I stole it, I don't get up into 5th anyway.

Anyway, really looking forward to see how this mod changes your corner exit speeds!
cali yarisThread starterCanoga Park, CA · Sep 19, 2011#8
^ That's a great tangent, and totally belongs in the thread. 🙇

Now what about those tools I supposedly need?
CrankyOldManWest Michigan · Sep 20, 2011#9
Tools. Yes, well. There are several opinions on this.

* Bluevitz-rs had access to a Toyo dealership and their task-specific "puller set B" tools, which made things much easier. This would be the most ideal route. Buying one will cost over $1500.

* A fellow with an older AE92 GT-S with a C52 transaxle bought just the SST's that apply to the C5* rebuild. Total cost at the time, $1200-ish. Not a bad option if you plan on rebuilding more than once, or offering rebuild services.

* One Celica owner that was adding a LSD to his C60 went the harborfreight route and had no issues to speak of.

NB - The single most expensive tool that a transaxle rebuild involving replacement of the LSD or its bearings is the torque wrench. To set the bearing preload, you need some seriously fine measurement. A 0-15 in-lbf is recommended, but you can probably get away with a 0-30. Yes, that's in-lbf. You'll know if you have one, because you would have paid upwards of $350 retail for it. There is no cheap alternative to this except perhaps getting a used one from ebay or borrowing one. Used is iffy unless you have a way to check the calibration on it. The smallest range I could find at work was a 0-50, and the graduations aren't fine enough--the needle is almost as thick as the gap between them. I have an alternative strategy planned, but it involves a force gauge and a custom tool for the output shaft, which is more expensive and complicated than a torque wrench, but I have access to the tools to do it.
Bluevitz-rsOshawa, Ontario, Canada · Sep 20, 2011#10
I haven't read it anywhere but I know I've seen that some 6 speeds use the .815 gear as 6th, so that's why I thought 5th and 6th might actually be interchangeable.

Edit: The Corolla XRS (USA Model) uses the C64 and has the .815 6th gear. Maybe you could find part numbers and compare to the 5th gear .815, or see if a dealer will order them in for comparison.

http://en.wikipedia.org/wiki/Toyota_C_transmission#C64
CrankyOldManWest Michigan · Sep 20, 2011#11
The 0.725:1 5th gear seems most common on Euro spec Toyota transmissions. I found a site that lists lots of info for the gears themselves including # of teeth and spiral direction. Many of the listings are incomplete, some seemingly halfway through data entry.

It looks on the surface that the 5th and 6th gear sets for 0.725 are opposite synchro spirals. That means that the individual gears can't be swapped, but the set could possibly be flipped over, assuming that the synchros and hub would mate properly, and the ID is the same.

Details:
5th gear 0.725:1

R40-NR30A29 {Drive Gear}
L29^N16A {Driven Gear}

6th gear 0.725:1

R40-NL30A28
L29^N
I'm not 100% on what the notations mean, but here's my best guess.

- R40: right-hand helix, 40 teeth
- NR30A: angled synchro teeth, right-hand slope?
- NL30A: angled synchro teeth, left-hand slope?
- 28/29: ID 28/29 mm??

- L29: left-hand helix, 29 teeth
- N16A: 16-tooth spline

- I think the gears have different IDs for their bearings. Perhaps this part should be broken off into another thread to prevent a total hijack?
cali yarisThread starterCanoga Park, CA · Sep 20, 2011#12
I think it's useful info, although a general "gearing/trans" thread would probably be a good idea.

I think Art's going to attempt it with tools on hand, let's see how it goes. We can always take the wreckage to a good trans shop. 😁
CrankyOldManWest Michigan · Sep 20, 2011#13
Originally Posted by cali yaris ↑
We can always take the wreckage to a good trans shop.
My brother-in-law has a sign in his garage:
Labor rates
  • $50/hr if I do it myself
  • $70/hr if you help
  • $100/hr labor if you've worked on it before
🙄
cali yarisThread starterCanoga Park, CA · Sep 20, 2011#14
good thing I won't be taking it to him, then... 🙄
johnny_vitzHamilton, Canada · Sep 20, 2011#15
I swapped out my echo transmission for the 1st gen xb (for the final drive), really picks up the acceleration. For the price of the used transmission, it wasn't worth pulling apart the transmission. I guess for the yaris, you probably have to though :(
cali yarisThread starterCanoga Park, CA · Sep 20, 2011#16
I'm not opposed to swapping a whole trans if it's that hard to swap the final drive. I don't think it will be a major project, though.
johnny_vitzHamilton, Canada · Sep 20, 2011#17
How much are the parts from toyota? I didn't want to attempt to take it apart myself, would have went to the trans. shop. Boss wouldn't let me keep my car on the hoist long enough anyways :)
cali yarisThread starterCanoga Park, CA · Sep 20, 2011#18
Three main parts are a bit over $400 from Toyota. Not including shims which should be pretty cheap.
johnny_vitzHamilton, Canada · Sep 20, 2011#19
I'll be watching to see more pics/updates. I think I'll be getting that LSD in the next year or so :)
scioncrewHB · Sep 20, 2011#20
Originally Posted by CrankyOldMan ↑
My brother-in-law has a sign in his garage:
Labor rates
  • $50/hr if I do it myself
  • $70/hr if you help
  • $100/hr labor if you've worked on it before
🙄
i like that sign👍
scioncrewHB · Sep 20, 2011#21
Garm your transmission is done..
Picture not included in this copy
😁

1 attachment not included in this copy

CrankyOldManWest Michigan · Sep 21, 2011#23
Originally Posted by scioncrew ↑
Garm your transmission is done...
Holy crap! 😲 That thing has got to be LOUD! Just imagine the sound of doing 100+ mph in reverse.
ttr125fan09corpus christi, texas · Sep 21, 2011#24
only got one question, can this be done in a slack-o-matic?
Bluevitz-rsOshawa, Ontario, Canada · Sep 21, 2011#25
Nope. Totally different guts in a slushbox.
cali yarisThread starterCanoga Park, CA · Oct 3, 2011#26
And as Art put it in his email, "KABOOOM!!!"

Picture not included in this copy
cali yarisThread starterCanoga Park, CA · Oct 3, 2011#27
and... Bam! Art, you're really, really good.

Picture not included in this copy

Picture not included in this copy
Maitre_Te_TeQuébec · Oct 3, 2011#28
nice job!
CrankyOldManWest Michigan · Oct 3, 2011#29
So in his opinion, would it have been easier to just drop in a whole output shaft and diff from an xB instead? I know the bearing preload would have to be checked and likely adjusted, but that has to be done anyway, right?
cali yarisThread starterCanoga Park, CA · Oct 3, 2011#30
Don't know the answer to that.
I do know that he did NOT need any special Toyota tools to do this.
Flipper_1938Kentucky · Oct 3, 2011#31
How long until you get to try it out?
cali yarisThread starterCanoga Park, CA · Oct 3, 2011#32
^ Soon. Next is replacing the turbo manifold (which was cracked in several places), then a couple of small things I wanted done, then button it up and go for a drive!
cali yarisThread starterCanoga Park, CA · Oct 25, 2011#33
Picked up the car, and all I can say is "whoa baby"! It's BEAST!

This is not for the weak of heart; definitely a performance mod. If you don't want 3500 @ 70 mph, more in-cabin noise, etc., it's not for you. If you want your power band available right now, it's sweet.

Hoping to race a little on Thursday night.
CrankyOldManWest Michigan · Oct 25, 2011#34
Originally Posted by cali yaris ↑
Picked up the car, and all I can say is "whoa baby"! It's BEAST! ... If you don't want 3500 @ 70 mph, more in-cabin noise, etc., ...
Nice! I'm curious about the increase in cabin noise: is it just from having higher RPM at the same speed? I think the solution for us DD-ers for highway speeds at lower RPM is to get the 5th gear setup from an '03-ish Matrix/Vibe 5-speed.
cali yarisThread starterCanoga Park, CA · Oct 25, 2011#35
^ My cabin noise is amplified by several things: 3" turbo-back exhaust, TRD motor mounts, gutted rear panels, no baack seat, etc. So 4000 rpm is LOUD in my car, might not be so much in a stock car.

Winding it up produces more noise in general.
Bluevitz-rsOshawa, Ontario, Canada · Oct 25, 2011#36
Is first gear of any use anymore?
cali yarisThread starterCanoga Park, CA · Oct 25, 2011#37
On the street, yes it's great. Drag racing, probably not.
ilikericesavannah, ga · Oct 25, 2011#38
LOL.. 2nd gear launch.. in a yaris.. ohh how i wish i were in your shoes
cali yarisThread starterCanoga Park, CA · Oct 25, 2011#39
I'll try it out both ways on Thursday. Looks like we have a few people coming out. 👍
fnkngrvIn The Hotbox · Oct 25, 2011#40
I can't recall what the RPM is at 70 with a stock final drive?
YaristeveLos Angeles · Oct 25, 2011#41
Originally Posted by fnkngrv ↑
I can't recall what the RPM is at 70 with a stock final drive?
3000 rpm in my stock Yaris.
CrankyOldManWest Michigan · Oct 25, 2011#42
Changing the 5th gear ratio from 0.815 to 0.725 puts the 70 mph RPM right around 3160. Not great, but closer to stock. The 5th gear is out of a C59 from an 03-ish Matrix/Vibe/Corolla. That particular C59 also has a 3.941 final drive, which is a little bit more aggressive without going whole hog. The thing that sucks about the C59 is that they normally run about $1.2k rebuilt, $600 broken.
CrankyOldManWest Michigan · Oct 30, 2011#43
Ok, made some progress on my gear swap project. A C56 can indeed be torn down without the Toyota SST kit.

Important tools to have (or at least what I used):

* Bolt puller set
* Bearing separator set
* 3/8" drive breaker bar
* deadblow hammer

Replacing the bearings will require a few other automotive tools, but I haven't messed with that yet. Putting it back together is a very different story and will require access to a hydraulic press and either a very precise torque wrench (0-15 in-lb) or knowledge of the mechanics/physics/calculus to make a widget that will verify the pre-load torque on the differential.
cali yarisThread starterCanoga Park, CA · Oct 30, 2011#44
I think Art used a 2-ton press. About $150 from Harbor Freight.
bzinn 1University Place,WA · Nov 1, 2011#45
The guy I helped change the gears(he busted one on an xB) just got a press from Harbor Freight like Garm said.It was not easy,but it was cold and rainy and I had never taken apart a tranny before like this so I was just the helper.No need for special tools short of bearing separator and bolt outs,other than that is basic tools
Jason@SportsCarDebary, FL · Dec 6, 2011#46
Originally Posted by CrankyOldMan ↑
Pardon the tangent, but...

I prefer to keep all three decimal places to avoid confusion with similar ratios available on variants of the C5* line. Yes, I've spent entirely too much time researching this. =)

Yaris (non Vitz RS) C50:
1st 3.545:1
2nd 1.904:1
3rd 1.310:1
4th 0.969:1
5th 0.815:1
Final 3.722:1

Vitz RS C56 close ratio:
1st 3.166:1
2nd 1.904:1
3rd 1.392:1
4th 1.301:1
5th 0.815:1
Final 4.312:1

My dream Frankensaxle:
1st 3.166:1
2nd 1.904:1
3rd 1.392:1
4th 1.031:1
5th 0.725:1
Final 4.312:1

Why go through the trouble? Well, because I hate getting stuck below the power band in second gear. The redline speed of 1st is very close to the stock, but because of the taller ratio the drop is only about 2400 rpm to second--instead of 2900. A rev-limit shift would in theory land you just over 4k, right in the sweet spot of the stock/NA torque curve. The internal ratio of 2nd is the same for all C5* series gearboxes, and the drive gear is integrated into the input shaft. Can't change it without customizing the whole shaft. The benefit here is from the shorter final drive ratio, as well as the shorter ratios in 3rd/4th. Sure, you give up a ton of theoretical top end speed, but if you don't ever plan on driving over 100mph, you'll never know it's gone.

The super-tall overdrive ratio in 5th is to compensate for highway cruising. When driving like I stole it, I don't get up into 5th anyway.

Anyway, really looking forward to see how this mod changes your corner exit speeds!
And Garm has found yet another option: Stay tuned

It wont be "freeway friendly", but damn, it will get you there in a hurry.
cali yarisThread starterCanoga Park, CA · Dec 6, 2011#47
ha, a unicorn indeed!

We have access to several final drives now.

plus the Kaaz 3-4-5 gear set as noted, which will be posted to our online store shortly. Not for the weak of heart!!

WOOT!
Jason@SportsCarDebary, FL · Dec 6, 2011#48
Originally Posted by cali yaris ↑
ha, a unicorn indeed!

We have access to several final drives now.

plus the Kaaz 3-4-5 gear set as noted, which will be posted to our online store shortly. Not for the weak of heart!!

WOOT!
Wait till Cranky starts running the numbers, his head should be spinning.
cali yarisThread starterCanoga Park, CA · Dec 6, 2011#49
no kidding.

ok, so final drives: 3.7 stock, 4.0 (pricey), 4.2 (xB), 4.5 (pricey)

all to be posted to the store. The 4.2 xB one will be offered as a kit with the drive, ring gear and ring bolts. (Shims must be purchased separately)
ilikericesavannah, ga · Dec 6, 2011#50
impressive.. you guys are on it..